Prezime:	Janjatović
Ime:	Petar
APVNT broj:	5548
Organizacija:	Fakultet tehničkih nauka u Novom Sadu

Produkcija - zbirni rezultati
Oznaka	Naziv kriterijuma produkcije	Broj	Poena
		71	142.50
M21	Rad u vrhunskom međunarodnom časopisu Rad u vrhunskom međunarodnom časopisu Baloš S., Dramićanin M., Janjatović P., Zabunov I., Klobčar D., Bušić M., Grilli M.: Metal Oxide Nanoparticle-Based Coating as a Catalyzer for A-TIG Welding: Critical Raw Material Perspective, Metals, 2019, Vol. 9, No. 5/567, pp. 1-12, ISSN 2075-4701 Baloš S., Dramićanin M., Janjatović P., Zabunov I., Pilić B., Goel S., Szutkowska M.: Suppressing the Use of Critical Raw Materials in Joining of AISI 304 Stainless Steel Using Activated Tungsten Inert Gas Welding, Metals, 2019, Vol. 9, No. 11/1187, pp. 1-13, ISSN 2075-4701 Baloš S., Janjatović P., Dramićanin M., Labus Zlatanović D., Pilić B., Hanus P., Jaworska L.: Microstructure, Microhardness, and Wear Properties of Cobalt Alloy Electrodes Coated with TiO2 Nanoparticles, Metals, 2019, Vol. 9, No. 11/1186, pp. 1-10, ISSN 2075-4701 Skakun (Francuski) P., Rajnović D., Janjatović P., Baloš S., Shishkin A., Novak P., Šiđanin (Sidjanin) L.: Metallographic Determination of Strain Distribution in Cold Extruded Aluminum Gear-Like Element, Metals, 2020, Vol. 10, No. 5, ISSN 2075-4701 Berus L., Skakun (Francuski) P., Rajnović D., Janjatović P., Šiđanin (Sidjanin) L., Ficko M.: Determination of the Grain Size in Single-Phase Materials by Edge Detection and Concatenation, Metals, 2020, Vol. 10, No. 10, ISSN 2075-4701 Baloš S., Kulundžić N., Janjatović P., Zabunov I., Pilić B., Klobčar D.: Influence of Metalic Oxide Nanoparticles on the Mechanical Properties of an A-TIG Welded 304L Austenitic Stainless Steel, Materials, 2020, Vol. 13, No. 20, ISSN 1996-1944 Janjatović P., Erić Cekić O., Šiđanin (Sidjanin) L., Baloš S., Dramićanin M., Grbović Novaković J., Rajnović D.: The Effect of Water Concentration in Ethyl Alcohol on the Environmentally Assisted Embrittlement of Austempered Ductile Irons , Metals, 2021, Vol. 11, No. 94, pp. 1-16, ISSN 2075-4701	7	56.00
M22	Rad u istaknutom međunarodnom časopisu Rad u istaknutom međunarodnom časopisu Baloš S., Labus Zlatanović D., Kulundžić N., Janjatović P., Dramićanin M., Lanc Z., Hadžistević M., Radišić S., Rajnović D., Pećanac M.: Influence of Tool-base Metal Interface on the Performance of an Aluminium-Magnesium Alloys Joined by Bobbin Tool Friction Stir Welding, Metals, 2023, Vol. 13, ISSN 2075-4701 Baloš S., Labus Zlatanović D., Kulundžić N., Janjatović P., Dramićanin M., Lanc Z., Hadžistević M., Radišić S., Rajnović D., Pećanac M.: Influence of Tool–Base Metal Interference on the Performance of an Aluminium–Magnesium Alloy Joined via Bobbin Tool Friction Stir Welding , Metals, 2023, Vol. 13, No. 1215, ISSN 2075-4701	2	10.00
M23	Rad u međunarodnom časopisu Rad u međunarodnom časopisu Baloš S., Rajnović D., Šiđanin (Sidjanin) L., Savković B., Kovač P., Janjatović P.: Tensile and fatigue properties, machinability and machined surface roughness of Al-Si-Cu alloys, Revista Materia, 2019, Vol. 24, No. 03, ISSN 1517-7076 Baloš S., Radisavljević I., Rajnović D., Janjatović P., Dramićanin M., Erić Cekić O., Šiđanin (Sidjanin) L.: Ballistic Behaviour of Austempered Compacted Graphite Iron Perforated Plates, Defence Science Journal, 2019, Vol. 69, No. 6, pp. 571-576, ISSN 0011-748X Dramićanin M., Baloš S., Janjatović P., Zabunov I., Grabulov V.: ACTIVATED FLUX TIG WELDING OF STAINLESS-STEEL PIPES , Chemical Industry & Chemical Engineering Quarterly / CI&CEQ, 2019, Vol. 25, No. 4, pp. 353-360, ISSN 1451-9372, UDK: 621.791:669.14.018.8 Baloš S., Petronijević Šarčev B., Šarčev I., Janjatović P., Pilić B., Baloš T.: Flexural Moduls and Strength of Cold Cured Poly(methylmethacrylate) Reinforced with TiO2 Nano Particles, Materiale Plastice, 2020, Vol. 57, No. 4, pp. 13-20, ISSN 0025-5289 Baloš S., Petronijević Šarčev B., Šarčev I., Mirković S., Pilić B., Baloš T., Janjatović P.: Autopolymerized Poly(methhyl methacrylate) reinforced with alumina nanoparticles, Vojnosanitetski pregled, 2020, ISSN 0042-8450 ***Baloš S., Petronijević Šarčev B., Šarčev I., Mirković S., Pilić B., Baloš T., Janjatović P.: Autopolymerized poly(methyl methacrylate) reinforced with aluminium trioxide nanoparticles- Nije povezan časopis**greska** Janjatović P., Erić Cekić O., Rajnović D., Baloš S., Grabulov V., Šiđanin (Sidjanin) L.: Microstructure and fracture mode of unalloyed dual phase austempered ductile iron, Chemical Industry & Chemical Engineering Quarterly / CI&CEQ, 2022, Vol. 28, No. 2, pp. 161-167, ISSN 1451-9372 Skakun (Francuski) P., Rajnović D., Janjatović P., Movrin D., Dramićanin M., Berus L., Ficko M.: Experimental determination of a strain state in a bulk forming of a low carbon steel, Materials Science-Medziagotyra, 2024, Vol. 30, No. 1, pp. 40-46, ISSN 1392-1320	8	24.00
M31	Predavanje po pozivu sa međunarodnog skupa štampano u celini Predavanje po pozivu sa međunarodnog skupa štampano u celini Baloš S., Dramićanin M., Janjatović P., Labus Zlatanović D., Šiđanin (Sidjanin) L.: Benefits of introducing nano particles in welding and hardfacing, 1. Dan varilne tehnike, zbornik predavanj - Dan novih tehnologij in postopkov varjenja, Ljubljana: Zveza drustev za varilno tehniko Slovenije, 2 December, 2016, ISBN 978-961-90183-5-4	1	3.00
M33	Saopštenje sa međunarodnog skupa štampano u celini Saopštenje sa međunarodnog skupa štampano u celini Baloš S., Dramićanin M., Labus Zlatanović D., Janjatović P., Šiđanin (Sidjanin) L.: GMAW welding of MPM sheets in active gas, 8. The International Conference "Innovative technologies for joining advanced materials" - TIMA, Timisoara: National R&D institute for welding and material testing - ISIM Timisoara, 2-3 June, 2016, pp. 75-78 Baloš S., Rajnović D., Dramićanin M., Janjatović P., Labus Zlatanović D., Eric-Cekic O., Šiđanin (Sidjanin) L.: Satram Effect During Wear of ADI Materials Against SiC, 8. PSU-UNS International Conference on Engineering and Technology - ICET, Novi Sad, 8-10 June, 2017, pp. 1-5 Baloš S., Radisavljevic I., Rajnović D., Janjatović P., Dramićanin M., Eric-Cekic O., Šiđanin (Sidjanin) L.: SITRAM Effect in Ballistic Testing of Perforated Plates Made of ADI Materials, 8. PSU-UNS International Conference on Engineering and Technology - ICET, Novi Sad, 8-10 June, 2017, pp. 1-5, ISBN 978-86-7892-934-2 Labus Zlatanović D., Baloš S., Dramićanin M., Janjatović P., Šiđanin (Sidjanin) L.: Optimization of Tool Geometry and Friction Stir Processing Parameters in AA5754 H111 Alloy, 8. PSU-UNS International Conference on Engineering and Technology - ICET, Novi Sad, 8-10 June, 2017, pp. 1-5 Baloš S., Šiđanin (Sidjanin) L., Dramićanin M., Labus Zlatanović D., Rajnović D., Janjatović P., Zabunov I.: Cellulose Electrodes Enhanced With TiO2 Nanoparticles, 18. International Scientific Conference - TRANSFER, Trenčianske Teplice, 23-24 November, 2017, pp. 1-7, ISBN 978-80-8075-787-8 Baloš S., Radisavljevic I., Rajnović D., Janjatović P., Dramićanin M., Erić Cekić O., Šiđanin (Sidjanin) L., Zabunov I.: Ballistic Properties Of Perforated Plates Made Of Austempered Ductile Iron, 18. International Scientific Conference - TRANSFER, Trenčianske Teplice, 23-24 November, 2017, pp. 1-7 Dramićanin M., Baloš S., Janjatović P., Zabunov I., Pećanac M., Rajnović D., Šiđanin (Sidjanin) L.: A-TIG IN PIPE WELDING, 4. The IIW South-East European Welding Congress, Beograd, 10-13 October, 2018, pp. 1-5, ISBN 978-86-82585-13-8 Janjatović P., Savković B., Kovač P., Baloš S., Dramićanin M., Zabunov I.: THE INFLUENCE OF WELDING SPEED AND CURRENT IN WELD SHAPE IN FORCE ARC PROCESS, 4. The IIW South-East European Welding Congress, Beograd, 10-13 October, 2018, pp. 1-5, ISBN 978-86-82585-13-8 Dramićanin M., Baloš S., Janjatović P., Rajnović D., Adamović (Majkić) S.: Effect of particle size TiO2 Flux in A-TIG welding, 14. Multinational Congress on Microscopy (MCM), Beograd, 15-20 September, 2019, pp. 362-364, ISBN 978-86-80335-11-7 Janjatović P., Rajnović D., Eric Cekic O., Baloš S., Šiđanin (Sidjanin) L.: A microstructure development during intercritical annealing of ductile iron – the dual phase austempered ductile irons, 14. Multinational Congress on Microscopy (MCM), Beograd: Serbian Society for Microscopy, 15-20 September, 2019, pp. 335-337, ISBN 978-86-80995-11-7 ***Eric Cekic O., Rajnović D., Šiđanin (Sidjanin) L., Janjatović P., Baloš S.: Dual Phase Austempered Ductile Iron – The Material Revolution and Its Engineering Applications- Nije povezan skup**greska** Dramićanin M., Janjatović P., Adamović (Majkić) S., Kulundžić N., Zabunov I., Rajnović D., Baloš S.: Influence of Micro and Nano Particles on the Performance of Activated Tungsten Inert Gas Welding, 14. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad, 23-25 September, 2021, pp. 177-180, ISBN 978-86-6022-364-9 Janjatović P., Rajnović D., Erić Cekić O., Baloš S., Dramićanin M., Šiđanin (Sidjanin) L.: THE PROPERTIES AND APPLICATION OF DUAL PHASE AUSTEMPERED DUCTILE IRONS , 14. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, 23-25 September, 2021, pp. 167-170, ISBN 978-86-6022-364-9 Janjatović P., Rajnović D., Baloš S., Dramićanin M., Erić Cekić O., Pećanac M., Labus Zlatanović D., Šiđanin (Sidjanin) L.: The effect of critical water concentration on the embrittlement of austempered ductile irons, 39. Savetovanje proizvodnog mašinstva Srbije - SPMS, Novi Sad, 26-27 October, 2023, pp. 72-76 Skakun (Francuski) P., Rajnović D., Janjatović P., Dramićanin M.: An experimental method for strain state determination in bulk metal forming, 39. Savetovanje proizvodnog mašinstva Srbije - SPMS, Novi Sad, 26-27 October, 2023, pp. 77-80 Ilić K., Hauck A., Brdar A., Spasojević S., Dramićanin M., Pećanac M., Janjatović P., Trivković (Ristić) M., Rajnović D., Baloš S., Šiđanin (Sidjanin) L.: Influence of WAAM technology parameters on properties of structural steel walls, 39. Savetovanje proizvodnog mašinstva Srbije - SPMS, Novi Sad, 26-27 October, 2023, pp. 99-104 Brdar A., Ilić K., Spasojević S., Labus Zlatanović D., Janjatović P., Zabunov I., Dramićanin M., Pećanac M., Trivković (Ristić) M., Rajnović D., Baloš S., Šiđanin (Sidjanin) L.: Ultrasonic welding of copper conductors, 39. Savetovanje proizvodnog mašinstva Srbije - SPMS, Novi Sad, 26-27 October, 2023, pp. 113-117 Pećanac M., Labus Zlatanović D., Kulundžić N., Dramićanin M., Janjatović P., Trivković (Ristić) M., Rajnović D., Baloš S., Šiđanin (Sidjanin) L.: Influence of shoulder pinching gap on mechanical properties of the bobbin tool FSW welded joints , 39. Savetovanje proizvodnog mašinstva Srbije - SPMS, Novi Sad: Biblioteka Matice srpske, 26-27 October, 2023, pp. 88-93, ISBN 978-86-6022-610-7 Spasojević S., Ilić K., Brdar A., Dramićanin M., Pećanac M., Janjatović P., Trivković (Ristić) M., Rajnović D., Baloš S., Šiđanin (Sidjanin) L.: Ispitivanje balističke otpornosti šljema ojačanog aramidnim vlaknima, 39. Savetovanje proizvodnog mašinstva Srbije - SPMS, Novi Sad: Biblioteka Matice srpske, 26-27 October, 2023, pp. 94-98	19	19.00
M34	Saopštenje sa međunarodnog skupa štampano u izvodu Saopštenje sa međunarodnog skupa štampano u izvodu Dramićanin M., Baloš S., Rajnović D., Labus Zlatanović D., Janjatović P., Eric-Cekic O., Šiđanin (Sidjanin) L.: Abrasive wear performance of ductile iron with different microstructures, 14. Young Researchers Conference–Materials Science and Engineering, Beograd, 9-11 December, 2015, pp. 37-37, ISBN 978-86-80321-31-8 Labus Zlatanović D., Rajnović D., Dramićanin M., Janjatović P., Baloš S., Erić-Cekić O., Šiđanin (Sidjanin) L.: Embrittlement behaviour of two different grades of ADI material in various environments, 14. Young Researchers Conference–Materials Science and Engineering, Beograd, 9-11 December, 2015, pp. 38-38, ISBN 978-86-80321-31-8 Rajnović D., Baloš S., Janjatović P., Dramićanin M., Labus Zlatanović D., Erić Cekić O., Šiđanin (Sidjanin) L.: Microstructure and fracture mode of ballistic perforated plates made of unalloyed ADI material, 16. European Microscopy Congress, Lyon, 29-2 August, 2016, pp. 1-2, ISBN 9783527808465 Dramićanin M., Baloš S., Rajnović D., Labus Zlatanović D., Janjatović P., Erić Cekić O., Šiđanin (Sidjanin) L.: The microstructure influence on abrasive wear behaviour of ductile irons, 16. European Microscopy Congress, Lyon, 29-2 August, 2016, pp. 1-2 Baloš S., Janjatović P., Labus Zlatanović D., Dramićanin M., Rajnović D., Šiđanin (Sidjanin) L.: Effect of Tunneling Defect in Friction Stir Welding of Al-Mg Alloys, 1. EMRS Fall Meeting, Varšava, 18-21 September, 2017 Rajnović D., Baloš S., Dramićanin M., Janjatović P., Labus Zlatanović D., Šiđanin (Sidjanin) L., Erić Cekić O.: Possibility of ADI material use as replacement of high Cr carbidic irons , 1. EMRS Fall Meeting, Varšava, 18-21 September, 2017 Rajnović D., Maćaš M., Janjatović P., Dramićanin M., Labus Zlatanović D., Baloš S., Šiđanin (Sidjanin) L.: Depletion of CRM alloying elements from the surface layer during hot isostatic pressing of superalloy IN100 , 1. EMRS Fall Meeting, Varšava, 18-21 September, 2017 Baloš S., Labus Zlatanović D., Janjatović P., Dramićanin M., Rajnović D., Šiđanin (Sidjanin) L.: Work Hardening and Wear Resistance Increase by Friction Stir Processing for Partial Magnesium Replacement in Aluminium Alloys, 1. EMRS Fall Meeting, Varšava, 18-21 September, 2017 Baloš S., Dramićanin M., Janjatović P., Labus Zlatanović D., Šiđanin (Sidjanin) L.: Friction Stir Welding of Al-Mg Alloys as a Replacement of Mg and Si consumables in GMAW and GTAW welding , 1. EMRS Fall Meeting, Varšava, 18-21 September, 2017 Baloš S., Radisavljević I., Janjatović P., Rajnović D., Šiđanin (Sidjanin) L., Dramićanin M., Erić Cekić O.: Austempered Ductile Iron Perforated Plate with an Increased Mass Effectiveness, 1. EMRS Fall Meeting, Varšava, 18-21 September, 2017 Rajnović D., Baloš S., Dramićanin M., Janjatović P., Labus Zlatanović D., Šiđanin (Sidjanin) L., Erić Cekić O.: Cavitation behavior of unalloyed ADI material used as replacement components, 1. EMRS Fall Meeting, Varšava, 18-21 September, 2017 Baloš S., Rajnović D., Janjatović P., Dramićanin M., Erić Cekić O., Radisavljević I., Šiđanin (Sidjanin) L.: Austempered Vermicular Iron Perforated Plates, 1. EMRS Fall Meeting, Varšava, 18-21 September, 2017 Baloš S., Radisavljević I., Janjatović P., Rajnović D., Šiđanin (Sidjanin) L., Dramićanin M., Erić Cekić O.: Austempered Ductile Iron Perforated Plate with an Increased Ballistic Protection, 1. EMRS Fall Meeting, Varšava, 18-21 September, 2017 Janjatović P., Rajnović D., Eric Cekic O., Baloš S., Šiđanin (Sidjanin) L.: A microstructure development during intercritical annealing of ductile iron – the dual phase austempered ductile irons, 14. Multinational Congress on Microscopy (MCM), Beograd: University of Belgrade, Institute for Biological Research “Siniša Stanković”, National Institute of Republic of Serbia Serbian Society for Microscopy, Serbia, 15-20 September, 2019, pp. 335-337, ISBN 978-86-80995-11-7 Janjatović P., Rajnović D., Erić Cekić O., Baloš S., Dramićanin M., Šiđanin (Sidjanin) L.: The effect of water concentration on mechanical properties and fracture mode of austempered ductile iron, 40. Microscopy Conference - MC, Beč: Dreiländertagung & Multinational Congress on Microscopy, 22-26 August, 2021, pp. 139-140	15	7.50
M51	Rad u vodećem časopisu nacionalnog značaja Rad u vodećem časopisu nacionalnog značaja Baloš S., Janjatović P., Dramićanin M., Labus Zlatanović D., Šiđanin (Sidjanin) L., Tomić S.: Improvement of Hardfacing Process of Cobalt Based Alloys Using Nanoparticles, Zavarivanje i zavarene konstrukcije, 2017, Vol. 62, No. 4, pp. 155-160, ISSN 0354-7965, UDK: 621.791	1	2.00
M53	Rad u naučnom časopisu Rad u naučnom časopisu Janjatović P., Baloš S.: Balističke karakteristike perforiranih ploča od ADI materijala, Zbornik radova Fakulteta tehničkih nauka, 2016, Vol. 31, No. 5, pp. 785-788, ISSN 0350-428X Baloš S., Dramićanin M., Labus Zlatanović D., Janjatović P., Šiđanin (Sidjanin) L.: GMAW welding of MPM sheets in active gas, Advanced Material Research, 2016, pp. 75-78, ISSN 1662-8985 Baloš S., Labus Zlatanović D., Janjatović P., Dramićanin M., Rajnović D., Šiđanin (Sidjanin) L.: Wear Resistance Increase by Friction Stir Processing for Partial Magnesium Replacement in Aluminium Alloys, IOP Conference Series: Materials Science and Engineering, 2018, Vol. 329, ISSN 1757-8981	3	3.00
M63	Saopštenje sa skupa nacionalnog značaja štampano u celini Saopštenje sa skupa nacionalnog značaja štampano u celini Baloš S., Janjatović P., Dramićanin M., Labus Zlatanović D., Šiđanin (Sidjanin) L., Tomić S.: Unapređenje procesa navarivanja legura kobalta primenom nano čestica, 29. Zavarivanje, Srebrno jezero, 14-17 Septembar, 2016, pp. 52-59, ISBN 978-86-82585-12-1 Janjatović P., Baloš S., Radisavljević I., Rajnović D., Dramićanin M., Labus Zlatanović D., Erić-Cekić O., Janjatović P.: Balističke karakteristike preforiranih ploča od ADI materijala, 10. International Scientific Conference ETIKUM, Novi Sad: Faculty of Technical Sciences, Department of Production Engineering, 23-25 Jun, 2016, pp. 25-28, ISBN 978-86-7892-825-3 Baloš S., Šiđanin (Sidjanin) L., Dramićanin M., Janjatović P., Labus Zlatanović D., Rajnović D.: Uticaj tunela na osobine zavarenog spoja legure AL 5052 H38, 10. International Scientific Conference ETIKUM, Novi Sad: Faculty of Technical Sciences, Department of Production Engineering, 23-25 Jun, 2016, pp. 21-24, ISBN 978-86-7892-825-3 Pećanac M., Dramićanin M., Janjatović P., Labus Zlatanović D., Rajnović D., Šiđanin (Sidjanin) L., Baloš S.: Ručno–elektrolučno zavarivanje rutilnim elektrodama sa modifikovanom oblogom, 11. International Scientific Conference ETIKUM, Novi Sad, 6-8 Decembar, 2017, pp. 93-96, ISBN 978-86-6022-00-68 Pećanac M., Dramićanin M., Janjatović P., Labus Zlatanović D., Rajnović D., Šiđanin (Sidjanin) L., Baloš S.: UTICAJ GEOMETRIJE RAMENA ALATA NA OSOBINE ZAVARENIH SPOJEVA DOBIJENIH ZAVARIVANJEM TRENJEM SA MEŠANJEM, 11. International Scientific Conference ETIKUM, Novi Sad, 6-8 Decembar, 2017, pp. 97-100, ISBN 978-86-6022-00-68 Rajnović D., Maćaš M., Ristić M., Janjatović P., Labus Zlatanović D., Baloš S., Šiđanin (Sidjanin) L.: Nastanak kontaminiranog sloja i zone bez karbida kod superlegure IN100 prilikom toplog hidrostatičkog presovanja, 11. International Scientific Conference ETIKUM, Novi Sad: FTN , 6-8 Decembar, 2017, pp. 85-88, ISBN 978-86-6022-00-68 Pećanac M., Dramićanin M., Janjatović P., Trivković (Ristić) M., Rajnović D., Šiđanin (Sidjanin) L., Baloš S.: Influence of tool geometry on friction stir welded joints, 13. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 28-29 Septembar, 2018, pp. 267-270, ISBN 978-86-6022-094-5 Janjatović P., Rajnović D., Erić Cekić O., Baloš S., Dramićanin M., Šiđanin (Sidjanin) L.: THE PROPERTIES AND APPLICATION OF DUAL PHASE AUSTEMPERED DUCTILE IRONS, Publications of the Faculty of Technical Sciences, University of Novi Sad, 2021, No. 254, pp. 167-170, 14. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad, 23-25 Septembar, 2021, pp. 167-170, ISBN 978-86-6022-364 Brdar A., Ilić K., Spasojević S., Labus Zlatanović D., Dramićanin M., Pećanac M., Janjatović P., Šiđanin (Sidjanin) L., Rajnović D., Baloš S.: UTICAJ GEOMETRIJE ALATA I PARAMETARA ZAVARIVANJA TRENJEM SA MEŠANJEM NA OSOBINE SPOJEVA OD AL 5052, 13. International Scientific Conference ETIKUM, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, 21000 Novi Sad, Serbia, 2-4 Decembar, 2021, pp. 135-138, ISBN 978-86-6022-387-8 Spasojević S., Ilić K., Brdar A., Dramićanin M., Labus Zlatanović D., Pećanac M., Janjatović P., Rajnović D., Baloš S., Šiđanin (Sidjanin) L.: UTICAJ NANOČESTICA METALNIH OKSIDA NA MEHANIČKE OSOBINE AUSTENITNOG NERĐAJUĆEG ČELIKA ZAVARENOG A-TIG POSTUPKOM, 13. International Scientific Conference ETIKUM, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, 21000 Novi Sad, Serbia, 2-4 Decembar, 2021, pp. 147-150, ISBN 978-86-6022-387-8 Ilić K., Brdar A., Spasojević S., Dramićanin M., Pećanac M., Janjatović P., Labus Zlatanović D., Rajnović D., Baloš S., Šiđanin (Sidjanin) L.: NAVARIVANJE LEGURA STELITA SA INFILTRIRANIM NANOČESTICAMA, 13. International Scientific Conference ETIKUM, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, 21000 Novi Sad, Serbia, 2-4 Decembar, 2021, pp. 139-142, ISBN 978-86-6022-387-8 Skakun (Francuski) P., Rajnović D., Janjatović P., Dramićanin M.: Experimental determination of strain state in metal forming, 14. International Scientific Conference ETIKUM, Novi Sad, 7-9 Decembar, 2023, pp. 109-112	12	6.00
M71	Odbranjena doktorska disertacija Odbranjena doktorska disertacija Janjatović P.: Uticaj vode na pojavu krtosti kod konvencionalnih i dvofaznih ADI materijala, Novi Sad, 2023	1	6.00
M84	Bitno poboljšan postojeći proizvod ili tehnologija Bitno poboljšan postojeći proizvod ili tehnologija Baloš S., Janjatović P., Rajnović D., Šiđanin (Sidjanin) L., Dramićanin M., Radisavljević I., Erić-Cekić O.: Postupak proizvodnje predoklopa od ADI materijala - ekvivalentan komercijalnim perforiranim pločama od čelika, 2017 Baloš S., Janjatović P., Rajnović D., Šiđanin (Sidjanin) L., Dramićanin M., Radisavljević I., Erić-Cekić O.: Postupak proizvodnje predoklopa od ADI materijala sa najvećom masenom efikasnošću, 2017	2	6.00