Prezime:	Kojić
Ime:	Sanja
APVNT broj:	5029
Organizacija:	Fakultet tehničkih nauka u Novom Sadu

Produkcija - zbirni rezultati
Oznaka	Naziv kriterijuma produkcije	Broj	Poena
		109	336.20
M21	Rad u vrhunskom međunarodnom časopisu Rad u vrhunskom međunarodnom časopisu Stefanović S., Petrović B., Porčić M., Penezić K., Pendić J., Dimitrijević V., Živaljević I., Vuković S., Jovanović J., Kojić S., Starović A., Blagojević T.: Bone spoons for prehistoric babies: detection of human teeth marks on the Neolithic artefacts from the site Grad-Starčevo (Serbia), PLOS ONE, 2019, Vol. 14, No. 12, pp. 1-38, ISSN 1932-6203 Kojić S., Stojanović G., Radonić V.: Novel Cost-Effective Microfluidic Chip Based on Hybrid Fabrication and Its Comprehensive Characterization, Sensors, 2019, Vol. 19, No. 7, pp. 1-18, ISSN 1424-8220 Jovanović N., Petrović B., Kojić S., Šipovac M., Marković D., Stefanović S., Stojanović G.: Primary Teeth Bite Marks Analysis on Various Materials: A Possible Tool in Children Health Risk Analysis and Safety Assessment, International Journal of Environmental Research and Public Health, 2019, Vol. 16, No. 13, pp. 1-12, ISSN 1660-4601 Wagle S., Kovačević B., Walker D., Ionescu C., Jones M., Stojanović G., Kojić S., Mooranian A., Al-Salami H.: Pharmacological and Advanced Cell Respiration Effects, Enhanced by Toxic Human-Bile Nano-Pharmaceuticals of Probucol Cell-Targeting Formulations, Pharmaceutics, 2020, Vol. 12, No. 8, pp. 1-17, ISSN 1999-4923 Mooranian A., Ionescu C., Wagle S., Kovacevic B., Walker D., Jones M., Chester J., Foster T., Johnston E., Kojić S., Stojanović G., Mikov M., Al-Salami H.: Polyelectrolytes Formulated with Primary Unconjugated Bile Acid Optimised Pharmacology of Bio-Engineered Implant, Pharmaceutics, 2021, Vol. 13, No. 10, pp. 1-16, ISSN 1999-4923 Mooranian A., Mihaela Ionescu C., Raj Wagle S., Kovacevic B., Walker D., Jones M., Chester J., Foster T., Johnston E., Kojić S., Stojanović G., Mikov M., Al-Salami H.: Taurine grafted islets improved drug-pharmacology without direct dependency between interleukin-6 and lithocholic acid in plasma, Biomedicines, 2022, Vol. 10, No. 1, pp. 111-126, ISSN 2227-9059 Petrović B., Stilinović N., Tomas Petrović A., Kojić S., Stojanović G.: Determination of salivary concentrations of leptin and adiponectin, ability to reduce ferric ions and total antioxidant capacity of saliva in patients with severe early childhood caries, Frontiers in Pediatrics, 2022, ISSN 2296-2360 Anisa Dahlan N., Thiha A., Ibrahim F., Milić L., Muniandy S., Fauzani Jamaluddin N., Petrović B., Kojić S., Stojanović G.: Role of Nanomaterials in the Fabrication of bioNEMS/MEMS for Biomedical Applications and towards Pioneering Food Waste Utilisation, Nanomaterials, 2022, Vol. 12, No. 22, pp. 1-41, ISSN 2079-4991 Bobić Z., Kojić S., Stojanović G., Terek V., Kovačević L., Terek P.: Nanotopography Evaluation of NiTi Alloy Exposed to Artificial Saliva and Different Mouthwashes, Materials, 2022, Vol. 15, No. 23, pp. 8705-8705, ISSN 1996-1944 Ankita S., Adrian S., Simić M., Kojić S., Stojanović G.: Gold Leaf-Based Microfluidic Platform for Detection of Essential Oils Using Impedance Spectroscopy, Biosensors, 2022, Vol. 12, No. 12, pp. 1-12, ISSN 2079-6374 Stojanović G., Radovanović M., Kojić S., Milić L., Simić M., Kojić T., Georges Duval R., Vukmirović J., Petrović B.: Temperature sensors manufactured from edible materials intended for oral cavity operation, International Journal of Precision Engineering and Manufacturing-Green Technology, 2023, ISSN 2198-0810 Petrović B., Kojić S., Milić L., Luzio A., Perić T., Marković E., Stojanović G.: Toothpaste ingestion-evaluating the problem and ensuring safety: systematic review and meta-analysis, Frontiers in Public Health, 2023, Vol. 11, pp. 1-12, ISSN 2296-2565 Popović Ž., Thiha A., Ibrahim F., Petrović B., Dahlan N., Milić L., Kojić S., Stojanović G.: Oral micro‑electronic platform for temperature and humidity monitoring, Scientific Reports, 2023, Vol. 13, No. 21277, pp. 1-12, ISSN 2045-2322 Kovacevic B., Raj Wagle S., Mihaela Ionescu C., Jones M., Lewkowicz M., YM Wong E., Kojić S., Stojanović G., Đanić (Stojančević) M., Mikov M., Mooranian A., Al-Salami H.: Novel hydrogel comprising non-ionic copolymer with various concentrations of pharmacologically active bile acids for cellular injectable gel, Colloids and surfaces B: Biointerfaces, 2023, Vol. 222, pp. 1-11, ISSN 0927-7765 Radovanović M., Stojanović G., Simić M., Suvara D., Milić L., Kojić S., Škrbić B.: Edible Electronic Components Made from Recycled Food Waste, Advanced Electronic Materials, 2024, No. 2300905, pp. 1-13, ISSN 2199-160X	15	120.00
M21a	Rad u međunarodnom časopisu izuzetnih vrednosti Rad u međunarodnom časopisu izuzetnih vrednosti Radović M., Dubourg G., Kojić S., Dohčević-Mitrović Z., Stojadinović B., Bokorov M., Crnojević-Bengin V.: Laser sintering of screen-printed TiO2 nanoparticles for improvement of mechanical and electrical properties, Ceramics International, 2018, Vol. 44, No. 9, pp. 10975-10983, ISSN 0272-8842 Wagle S., Kovačević B., Walker D., Ionescu C., Shah U., Stojanović G., Kojić S., Mooranian A., Al-Salami H.: Alginate-based drug oral targeting using bio-micro/nano encapsulation technologies, Expert Opinion on Drug Delivery, 2020, Vol. 17, No. 10, pp. 1361-1376, ISSN 1744-7593 Erceg T., Vukić (Skerlić) N., Šovljanski O., Teofilović V., Porobić S., Baloš S., Kojić S., Terek P., Banjanin B., Rakić S.: Preparation and characterization of biodegradable cellulose acetate-based films with novel plasticizer obtained by polyethylene terephthalate glycolysis intended for active packaging, Cellulose, 2023, ISSN 0969-0239	3	30.00
M22	Rad u istaknutom međunarodnom časopisu Rad u istaknutom međunarodnom časopisu Vukmirović J., Tripković Đ., Bajac B., Kojić S., Stojanović G., Srdić V.: Comparison of barium titanate thin films prepared with inkjet printing and spin coating, Processing and Application of Ceramics, 2015, Vol. 9, pp. 151-156, ISSN 1820-6131 Radovanović M., Kojić S., Vasiljević D., Stojanović G.: Characterization of LC sensor structures realized by PCB and LTCC technology for determining moisture in building materials, Processing and Application of Ceramics, 2018, Vol. 12, No. 1, pp. 13-20, ISSN 1820-6131 Stojanović G., Pojić M., Kojić S., Mišan A., Vasiljević D.: Mechanical properties of edible biofilm as a substrate for printed electronics, Applied Physics. A: Materials Science and Processing, 2019, Vol. 125, No. 576, pp. 1-7, ISSN 0947-8396 Samae M., Ritmetee P., Chirasatitsin S., Kojić S., Kojić T., Jevremov J., Stojanović G., Al Salami H.: Precise manufacturing and performance validation of paper-based passive microfluidic micromixers, International Journal of Precision Engineering and Manufacturing, 2020, Vol. 21, No. 3, pp. 499-508, ISSN 2234-7593 Kojić S., Birgermajer S., Radonić V., Kundačina (Podunavac) I., Jevremov J., Petrović B., Marković E., Stojanović G.: Optimization of hybrid microfluidic chip fabrication methods for biomedical application, Microfluidics and Nanofluidics, 2020, Vol. 24, No. 9, pp. 1-12, ISSN 1613-4982 Kundačina (Podunavac) I., Hinić S., Kojić S., Jelenčiakova N., Radonić V., Petrović B., Stojanović G.: Microfluidic Platform for Examination of Effect of Chewing Xylitol Gum on Salivary pH, O2, and CO2, Applied Sciences, 2021, Vol. 11, No. 5, pp. 2049-2061, ISSN 2076-3417 Stavrakis A., Kojić S., Petrović B., Nešković (Marković) I., Stojanović G.: Performance Evaluation of Dental Flosses Pre- and Post-Utilization, Materials, 2022, Vol. 15, No. 4, pp. 1-14, ISSN 1996-1944 Perać S., Savić S., Branković Z., Bernik S., Radojković A., Kojić S., Vasiljević D., Branković G.: Microstructural, Thermoelectric and Mechanical Properties of Cu Substituted NaCo2O4, Materials, 2022, Vol. 15, No. 13, pp. 1-11, ISSN 1996-1944 Thiha A., Ibrahim F., Joseph K., Petrović B., Kojić S., Dahlan N., Jamaluddin N., Qureshi S., Stojanović G.: A Novel Microfluidic Compact Disc to Investigate Electrochemical Property Changes Between Artificial and Real Salivary Samples Mixed with Mouthwashes Using Electrical Impedance Analysis, PLOS ONE, 2023, Vol. 18, No. 2, pp. 1-19, ISSN 1932-6203 Kundačina (Podunavac) I., Đoćoš M., Vejin M., Birgermajer S., Pavlović Z., Kojić S., Petrović B., Radonić V.: 3D-Printed Microfluidic Chip for Real-Time Glucose Monitoring in Liquid Analytes, Micromachines, 2023, Vol. 14, No. 3, pp. 1-12, ISSN 2072-666X Đoc´osˇ M., Aung T., Vejin M., Movrin D., Fauzani Jamaluddin N., Kojić S., Petrović B., Ibrahim F., Stojanović G.: Analysis of Covarine Particle in Toothpaste Through Microfluidic Simulation, Experimental Validation, and Electrical Impedance Spectroscopy, ACS Omega, 2024, Vol. 2024, ISSN 2470-1343 Stojanović G., Radovanović M., Kojić S., Milić L., Simić M., Kojić T., Duval R., Vukmirović J., Petrović B.: Temperature Sensors Manufactured from Edible Materials Intended for Oral Cavity Operation, International Journal of Precision Engineering and Manufacturing-Green Technology, 2024, No. 11, pp. 221-231, ISSN 2198-0810	12	60.00
M23	Rad u međunarodnom časopisu Rad u međunarodnom časopisu Kojić S., Ajkalo S., Gužvica M., Vasiljević D., Radovanović M., Stojanović G.: A Counter of Number of Products on the Shelf – Influences on Capacitance of Interdigitated Capacitor with Application in Intelligent Packaging, Informacije MIDEM - Journal of microelectronics, electronic components and materials, 2014, Vol. 44, No. 4, pp. 321-329, ISSN 0352-9045, UDK: 621.3:(53+54+621+66) Stojanović G., Lečić N., Kojić S., Vasiljević D.: Characterization of customized ferrite cores for a compact six-phase coupled inductor, International Journal of Applied Electromagnetics and Mechanics, 2018, Vol. 57, pp. 19-27, ISSN 1383-5416 Thamphiwatana S., Phairatana T., Chirasatitsin S., Samae M., Velvé Casquillas G., Al-Salami H., Kojić S., Stojanović G.: A microfuidic micromixer fabricated using polydimethylsiloxane-based platform for biomedical applications, MIDEM - Journal of microelectronics, electronic components and materials, 2018, Vol. 48, No. 3, pp. 173-179, ISSN 0352-9045, UDK: UDK621.3:(53+54+621+66) Petrović B., Kojić S., Perić T., Šipovac M., Lazarević J., Stefanović S., Stojanović G.: Surface characterisation of the raw and cooked bovine cortical metatarsal bone, Acta of Bioengineering and Biomechanics, 2019, Vol. 21, No. 1/2019, pp. 13-21, ISSN 1509-409X Marković D., Petrović B., Perić T., Trišić D., Kojić S., Kuljić B., Stojanović G.: Evaluation of sealant penetration in relation to fissure morphology, enamel surface preparation protocol and sealing material, Oral Health and Preventive Dentistry, 2019, ISSN 1602-1622 Petrović B., Marković D., Kojić S., Perić T., Dubourg G., Drljača M., Stojanović G.: Characterization of Glass Ionomer Cements Stored in Various Solutions, Materiali in Tehnologije, 2019, Vol. 2, No. 53, pp. 285-293, ISSN 1580-2949, UDK: 620.1:620.3:666.1:616.314-74 Kundačina (Podunavac) I., Hinić S., Kojić S., Jelenčiakova N., Radonić V., Petrović B., Stojanović G.: Microfluidic Approach for Measurements of pH, O2, and CO2 in Saliva, Sensors and Materials, 2021, Vol. 33, No. 3, pp. 1037-1050, ISSN 0914-4935 Hinic S., Petrović B., Kojić S., Omerović N., Jevremov J., Jelenciakova N., Stojanović G.: Viscosity and mixing properties of artificial saliva and four different mouthwashes, Biorheology, 2021, Vol. 57, No. 2-4, pp. 87-100, ISSN 0006-355X Šipovac M., Petrović B., Kojić S., Pantelinac J., Penezić K., Čapo I., Stefanović S.: Crown Formation Times of Deciduous Teeth and Age at Death in Neolithic Newborns, International Journal of Morphology, 2021, Vol. 39, No. 3, pp. 780-784, ISSN 0717-9502 Kojić S., Simić M., Aber M., Petrović B., Stojanović G.: INFLUENCE OF ARTIFICIAL SALIVA AND ESSENTIAL OIL-BASED SOLUTIONS ON THE ELECTRICAL PARAMETERS OF NITINOL AND STAINLESS STEEL ARCHWIRES, Materiali in Tehnologije, 2022, Vol. 56, No. 5, pp. 445-452, ISSN 1580-2949, UDK: 620.193.16:616.314-089.23 Joseph K., Ibrahim F., Qureshi S., Petrović B., Kojić S., Thiha A., Jamaluddin N., Dahlan N., Stojanović G.: Enhanced Sweat Biosensing with Thread-Embedded Microfluidic Devices, Medical Science Monitor, 2024, No. 30:e943321, ISSN 1234-1010 Marković E., Perić T., Kojić S., Stošić M., Šćepan I., Petrović B.: Influence of casein phosphopeptide-amorphous calcium phosphate on the surface topography and composition of nickel-titanium archwires during orthodontic treatment with fixed appliances, Journal of Oral Science, 2024, Vol. 66, No. 1, pp. 60-65, ISSN 1343-4934	12	37.00
M24	Rad u časopisu međunarodnog značaja verifikovanog posebnom odlukom Rad u časopisu međunarodnog značaja verifikovanog posebnom odlukom Petrović B., Marković E., Perić T., Kojić S.: Challenges in Experimental Evaluation of Morphological, ChemoMechanical and Adhesive Properties of Glass-ionomer Based Dental Materials , Advanced Technologies and Materials, 2019, Vol. 44, No. 2, pp. 25-30, ISSN 2620-0325 Jelenčiakova N., Petrović B., Kojić S., Jevremov J., Hinić S.: Application of Mathematical Models and Microfluidics in the Analysis of Saliva Mixing with Antiseptic Solutions, Balkan Journal of Stomatology, 2020, Vol. 24, No. 2, pp. 84-90, ISSN 1107-1141	2	6.00
M33	Saopštenje sa međunarodnog skupa štampano u celini Saopštenje sa međunarodnog skupa štampano u celini Kojić S., Ajkalo S., Gužvica M., Vasiljević D., Radovanović M., Stojanović G.: Influence of the position of the electrodes on capacitance of interdigitated capacitor fabricated on flexible foil, 9. INDEL, Banja Luka, 1-3 November, 2012, pp. 308-312, ISBN 987-99955-46-14-4 Žlebič Č., Kisić M., Blaž N., Menićanin A., Živanov Lj., Damnjanović M., Kojić S.: Ink-jet printed strain sensor on polyimide substrate, 36. International Spring Seminar on Electronics Technology - ISSE, Alba Iulia, 8-12 May, 2013, pp. 409-414 Kojić S., Radovanović M., Rašković Depalov V., Stojanović G.: Competition for the best students idea, based on experience of the University of Novi Sad, 1. WBCInno International conference, Novi Sad: Univerzitet u Novom Sadu, 18 September, 2015, pp. 45-48, ISBN Competition for the Vasiljević D., Kojić S., Pivaš B., Medić D., Tadić A., Mirković S., Radovanović M.: Cost-effective interdigitated capacitive sensors for efficient bacteria detection, 15. International Symposium INFOTEH-JAHORINA (INFOTEH), Jahorina, 16-18 March, 2016, pp. 11-14, ISBN 978-99955-763-9-4 Radovanović M., Kojić S., Vasiljević D., Samardžić N., Crespo F., Cargou S., Velve Casquillas G., Chirasatitsin S., Stojanović G.: Performances comparison of microfludic passive mixer fabricated in low-cost and PDMS technologies, 8. PSU-UNS International Conference on Engineering and Technology - ICET, Novi Sad, 8-10 June, 2017, pp. 1-4 Vasiljević D., Stojanović G., Radovanović M., Kojić S., Medić D., Pivaš B., Šorđan R.: PCB sensor for bacteria detection in saline, 1. IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes (IMWS-AMP), Pavia, 20-22 September, 2017 Chirasatitsin S., Kojić S., Stojanović G.: Optimization of microchannel fabrication using xurographic technique for microfluidic chips, 11. International Scientific Conference ETIKUM, Novi Sad: FACULTY OF TECHNICAL SCIENCES, 6-8 December, 2017, pp. 13-16, ISBN 978-86-6022-00-68 Vučinić S., Petrović B., Kojić S., Šipovac M., Stefanović S., Stojanović G.: Influence of specimen preparation and nanoindentation protocol on the mechanical properties of bovine bone, 5. International Conference on Electrical, Electronic and Computing Engineering IcETRAN, Palić: Fakultet Tehničkih Nauka, 11-14 June, 2018, pp. 728-731, ISBN 978-86-7466-752-1 Lazarević J., Drljača M., Brdar S., Petrović B., Kojić S., Stojanović G.: Automating of Nanoindentation raw results processing with Python module, 5. International Conference on Electrical, Electronic and Computing Engineering IcETRAN, Palić: Fakultet Tehničkih Nauka, 11-14 June, 2018, pp. 1118-1121, ISBN 978-86-7466-752-1 Kojić S., Milićević D., Lazarević J., Drljača M., Stojanović G.: Design and Testing of Microfluidic Micromixer Fabricated Using Xurographic Technique, 41. International Spring Seminar on Electronics Technology - ISSE, Zlatibor: IEEE, 16-20 May, 2018, pp. 1-5, ISBN 978-1-5386-5731-7 Laketa J., Kojić T., Radovanović M., Kojić S., Dajana M., Stojanović G.: Cost-Effective Microfluidic Device for Detection of Psychoactive Substances, 12. International Symposium on Industrial Electronics and Applications (INDEL), Banja Luka: IEEE, 1-3 November, 2018, pp. 1-4 Šipovac M., Jović A., Vicko K., Kojić S., Stefanović S., Petrović B.: SEM and EDS Analysis of Primary Teeth Cementum, 12. International Scientific Conference ETIKUM, Novi Sad: UNIVERSITY OF NOVI SAD, FACULTY OF TECHNICAL SCIENCES DEPARTMENT OF PRODUCTION ENGINEERING CHAIR OF METROLOGY, QUALITY, FIXTURES, TOOLS AND ECOLOGICAL ENGINEERING ASPECTS, 6-8 December, 2018, ISBN 978-86-6022-123-2 Vicko K., Puškar T., Jevremov J., Kojić S., Stojanović G., Petrović B.: The Effects of Sample Preparation and Nanoindentation Protocol on Surface Mechanical Properties of Primary Teeth Enamel, 12. International Scientific Conference ETIKUM, Novi Sad: UNIVERSITY OF NOVI SAD, FACULTY OF TECHNICAL SCIENCES DEPARTMENT OF PRODUCTION ENGINEERING CHAIR OF METROLOGY, QUALITY, FIXTURES, TOOLS AND ECOLOGICAL ENGINEERING ASPECTS, 6-8 December, 2018, ISBN 978-86-6022-123-2 Stojanović G., Kojić S., Radovanović M., Kojić T.: The UNS Creativity Center as a Center of Gravity for Students Volunteering, 1. IF4TM International Conference on the third mission of the university, Beograd: University of Kragujevac, 23-24 November, 2018, ISBN 978-86-81037-58-4 Jevremov J., Kundačina (Podunavac) I., Lazarević J., Kojić S., Radonić V., Stojanović G.: Performances of Microfluidic Mixing Regulated Using Active Pressure Controller, 6. International Conference on Electrical, Electronic and Computing Engineering IcETRAN, Srebrno jezero: Društvo za ETRAN i Akademska misao, 3-5 June, 2019 Stojanović A., Jevremov J., Petrović B., Kojić S., Lazarević J., Stojanović G.: Analysis of PVC microfluidic system for antibacterial solutions delivery in dentistry, 6. International Conference on Electrical, Electronic and Computing Engineering IcETRAN, Srebrno jezero: Društvo za ETRAN i Akademska misao, 3-5 June, 2019, pp. 244-247, ISBN 978-86-7466-785-9 Šipovac M., Kojić S., Stefanović S., Petrović B.: QUANTITATIVE AND QUALITATIVE ANALYSIS OF PRENATAL, POSTNATAL PRIMARY TEETH ENAMEL AND NEONATAL LINE , 72. International Scientific Conference in Dentistry, Novi Sad: Dentistry Clinic of Vojvodina, 29-30 March, 2019, pp. 86-88, ISBN 978-86-80894-03-4 Duša A., Kundačina (Podunavac) I., Kojić S., Radonić V.: Design and Simulation of Microfluidic Micro-Mixer with Parallelogram Barriers, 18. IEEE International Conference on Smart Technologies - EUROCON, Novi Sad: IEEE, 1-4 July, 2019 Milošević R., Kašiković N., Pavlović Ž., Kojić S., Kukuruzović D., Cigula T., Urbas R.: ANALYSIS OF PHYSICAL AND MECHANICAL CHARACTERISTICS OF FUNCTIONAL COATINGS WITH FRAGRANCED MICROCAPSULES, 3. International Printing Technologies Symposium, Istambul: Marmara Üniversitesi, 10-12 October, 2019, pp. 173-179, ISBN 978-9944-0636-9-2 Bobić Z., Petrović B., Kojić S., Terek V., Škorić B., Kovačević L., Stojanović G., Terek P.: A Preliminary Study of the Various Media Influence of NiTi Corrosion, 14. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Fakultet tehničkih nauka, Departman za Proizvodno Mašinstvo, 23-25 September, 2021, pp. 155-158, ISBN 978-86-6022-364-9 Bobić Z., Petrović B., Kojić S., Terek V., Škorić B., Kovačević L., Stojanović G., Terek P.: Influence of fluorine-containing mouthwashes on NiTi alloy corrosion, 38. International Conference of Production Engineering - ICPE-S, Čačak: University of Kragujevac, Faculty of Technical Sciences Čačak, Serbia, 14-15 October, 2021, pp. 288-294, ISBN 978-86-7776-252-0 Movrin D., Pintać Šarac D., Knežević P., Milutinović M., Kojić S., Premčevski V.: Comparison of mechanical properties of regular and antibacterial 3d printed PLA specimens, 14. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Fakultet tehničkih nauka, 23-25 September, 2021, pp. 233-236, ISBN 978-86-6022-364-9 Milić L., Petrović B., Kojić S., Qureshi S., Stojanović G.: Using the Hough Transform in the Automatization of Contact Angle Calculation, 29. Telekomunikacioni forum TELFOR, Beograd, 23-24 November, 2021, pp. 1-4, ISBN 978-1-6654-2585-8/21 Milić L., Qureshi S., Vejin M., Stanojević K., Kojić S., Petrović B., Stojanović G.: Automation of Measurement of Wetting Angle of Human Enamel With Antiseptic Solutions Using MATLAB, 13. International Scientific Conference ETIKUM, Novi Sad, 2-4 December, 2021, ISBN 978-86-6022-387-8 Đoćoš M., Brdar S., Vejin M., Petrović B., Milić L., Kojić S.: A Python-based Pipeline for Processing and Plotting Automatisation of Nanoindentation Data: Plotting with GraphPad Prism software, 21. International Symposium INFOTEH-JAHORINA (INFOTEH), Jahorina, 16-18 March, 2022, pp. 1-4 Adamov L., Petrović N., Putnik I., Đoćoš M., Petrović B., Vejin M., Kojić S.: Automated dental age assessment with Chameriere's third molar index: A precision approach and future development, 14. International Scientific Conference ETIKUM, Novi Sad: Universoty of Novi Sad, Faculty of Technical Sciences, Department of production engineering, Chair of metrology, quality, fixtures, tools and ecological engineering aspects , 7-9 December, 2023, pp. 133-136, ISBN 978-86-6022-617-6 Putnik I., Petrović N., Adamov L., Vejin M., Miroslav Đ., Movrin D., Kojić S.: SLA printed microfluidic chips: Printing orientation influence on printing quality, 14. International Scientific Conference ETIKUM, Novi Sad: Universoty of Novi Sad, Faculty of Technical Sciences, Department of production engineering, Chair of metrology, quality, fixtures, tools and ecological engineering aspects , 7-9 December, 2023, pp. 169-172, ISBN 978-86-6022-387-8 Vejin M., Đoćoš M., Bučko S., Katona J., Kojić S., Stojanović G.: Fabrication and Characterization of a Resistor Made of Carbon Film, 47. MIPRO - International convention on information and communication technology, electronics and microelectronics - Savjetovanje o mikroračunalima u telekomunikacijama, Opatija: IEEE, 20-24 May, 2024, pp. 2115-2120, ISBN 979-8-3503-8250-1 Putnik I., Petrović N., Joseph K., Thiha A., Vejin M., Kojić S., Stojanović G.: Microfluidic CD Fabrication for Electrochemical Analysis of pH-varied Sweat, 47. MIPRO - International convention on information and communication technology, electronics and microelectronics - Savjetovanje o mikroračunalima u telekomunikacijama, Opatija: IEEE, 20-24 May, 2024, pp. 1167-1172, ISBN 979-8-3503-8250-1	29	29.00
M34	Saopštenje sa međunarodnog skupa štampano u izvodu Saopštenje sa međunarodnog skupa štampano u izvodu Tripković Đ., Vukmirović J., Bajac B., Kojić S., Mojić B., Stojanović G., Srdić V.: Characterization of BaTiO3 films fabricated by ink-jet printing process, 10. Students’ Meeting, Processing and Application of Ceramics, Novi Sad, 6-9 November, 2013, pp. 43-43 Dubourg G., Kojić S., Matović J., Crnojević-Bengin V.: Rapid fabrication of paper-based MEMS strain sensor using a laser micromachining process, 12. Micro and Nano Engineering, Hague, 2015 Vukmirović J., Tripković Đ., Bajac B., Kojić S., Stojanović G., Srdić V.: Fabrication of BaTiO3 thin films by inkjet printing, 11. Students’ Meeting, Novi Sad, 21-24 October, 2015, pp. 128-128 Stanojev J., Vukmirović J., Bajac B., Kojić S., Blaž N., Stojanović G., Živanov Lj., Srdić V.: Investigation of dielectric properties of barium strontium titanate (BST) thin films for potential application in tunable microwave devices, 15. Electroceramics, Limoges, 27-29 June, 2016 Petrović B., Marković D., Perić T., Kojić S., Dubourg G., Gjorgievska E.: Surface characterization of glass ionomer cements stored in various solutions using nanoindentation and SEM/EDX techniques, 3. Refractory, process industry, nanotechnologies and nanomedicine, Beograd: Vinča Institute of Nuclear Sciences, Belgrade, Serbia Serbian Society for Nanotechnologies and Nanomedicine Serbian Society for Refractory and Process Industry, 1-2 June, 2017 Savić S., Kojić S., Katona J., Vukmirović J., Dubourg G., Niarchos G., Radović M.: Inkjet printing of TiO2 nanoparticles on flexible substrates, 19. Annual Conference-YUCOMAT, Herceg Novi, 4-8 September, 2017, pp. 60-60 Vukmirović J., Bajac B., Nestorović A., Dubourg G., Stanojev J., Kojić S., Stojanović G., Srdić V.: CHALLENGES IN PREPARATION OF MICROWAVE TUNABLE DEVICES WITH DOPED BaTiO3 THIN FILMS, 15. EUROMAT-European Congress on Advanced Materials and Processes, Thessaloniki: Hellenic Metallurgical Society and Hellenic Society for the Science and Technology of Condensed Matter, 17-22 September, 2017, pp. 133-133 Petrović B., Penezić K., Porčić M., Pendić J., Kojić S., Jovanović J., Stefanović S.: Cone-Beam Computed Tomography in Paleodontology and Bioarchaeology, 22. European Meeting of the Paleopathology Association, Zagreb: Institute for Anthropological Research, 28-1 August, 2018, pp. 51-51, ISBN 978-953-8092-11-4 Kojić S., Stojanović A., Jevremov J., Lazarević J., Petrović B., Stojanović G.: DESIGN OF MICROFLUIDIC PVC CHIP BASED SYSTEMS FOR SALIVARY DIAGNOSTICS, 72. International Scientific Conference in Dentistry, Novi Sad: Dentistry Clinic of Vojvodina, 29-30 March, 2019, ISBN 978-86-80894-03-4 Duša A., Kundačina (Podunavac) I., Kojić S., Radonić V.: Microfluidic sensors realized using low-temperature co-fired ceramic technology, 13. Conference for Young Scientists in Ceramics, Novi Sad: Službeni glasnik, 16-19 October, 2019, ISBN 978-86-6253-104-9 Perać S., Savić S., Kojić S., Branković Z., Branković G.: Nanoindentation study of Cu doped NaCo2O4 ceramics, 5. Conference of the Serbian Society for Ceramic Materials, Belgrade, 11-13 June, 2019, pp. 132-132 Golub M., Jovanović N., Petrović B., Kojić S., Jekenčiakova N., Hinić S.: Biocorrosion of nickel-titanium dental instruments under the influence of different solutions, 1. International Scientific Conference in Dentistry, Novi Sad, 2020, UDK: 978-86-80894-04-1 Šipovac M., Petrović B., Kojić S., Jović A., Penezić K., Jovanović N., Stefanović S.: The appearance of incremental lines in the enamel of primary teeth, 1. International Scientific Conference in Dentistry, Novi Sad, 2020, pp. 134-134, UDK: 978-86-80894-04-1 Bobić Z., Petrović B., Kojić S., Terek V., Kovačević L., Stojanović G., Škorić B., Terek P.: Effects of corrosion on NiTi caused by fluoride and chloride media in non-accelerated corrosion tests, 19. Young Researchers Conference Materials Sciences and Engineering - YRC, Beograd: Institute of Technical Sciences of SASA, 1-3 December, 2021, pp. 63-63, ISBN 978-86-80321-36-3 Bobić Z., Petrović B., Kojić S., Terek V., Škorić B., Kovačević L., Terek P.: Nano topography evaluation of NiTi alloy exposed to artificial saliva and different mouthwashes, 1. Corrosion and Materials Degradation Web Conference, Online: MDPI, 17-19 May, 2021 Perać S., Savić S., Branković Z., Bernik S., Kojić S., Vasiljević D., Branković G.: Effect of Cu doping on microstructural, thermoelectric and mechanical properties of NaCo2O4 ceramics, 6. Conference of The Serbian Society for Ceramic Materials CSCS, Beograd, 28-29 June, 2022, pp. 87-87 Husak Y., Terek P., Kojić S., Bobić Z., Petrović B., Kyrylenko S., Pogorielov M., Simka W.: Bio-mimetic bone-like surface structure of Ti-based implants, 23. Annual Conference-YUCOMAT, Herceg Novi: Materials Research Society of Serbia Knez Mihailova 35/IV, P.O. Box 433, 11000 Belgrade, Serbia, 29-2 August, 2022, ISBN 978-86-919111-7-1 Husak Y., Kyrylenko S., Petrović B., Terek P., Kojić S., Bobić Z., Varava Y., Shmatkov A., Pogorielov M., Simka W.: Three-Dimensional Bioactive Surface Structure on Ti-based Implants, 12. International Conference "Nanomaterials: Applications & Properties" - IEEE NAP, Krakow: IEEE Publishing, 11-16 September, 2022, pp. 23-23, ISBN 978-1-6654-8982-9 Vejin M., Đoćoš M., Pojic M., Terek P., Kojić S., Bobić Z., Petrović B., Stojanović G.: Edible Sensor for Electric Impedance Spectroscopic Analysis of Bioactive Liquids Containing Silver Nanoparticles, 12. International Conference "Nanomaterials: Applications & Properties" - IEEE NAP, Krakow: IEEE Publishing, 11-16 September, 2022, pp. 42-42, ISBN 978-1-6654-8982-9 Đoćoš M., Vejin M., Luzio A., Feltri E., Kojić S., Petrović B., Stojanović G.: Investigation of covarine particle behaviour in a microfluidic mixer with artificial saliva, 24. Annual Conference-YUCOMAT, Herceg Novi: Material Research Society of Serbia, 4-8 September, 2023, pp. 1-1, ISBN 978-86-919111-8-8	20	10.00
M51	Rad u vodećem časopisu nacionalnog značaja Rad u vodećem časopisu nacionalnog značaja Marković J., Plecerova A., Živaljević I., Kojić S., Petrović B., Đorđević A., Stefanović S.: Antropološka analiza spaljenih ljudskih ostataka sa praistorijske nekropole Konopište u blizini sela Mala Vrbica kod Kladova, Zbornik Narodnog muzeja: arheologija, 2021, Vol. 25, No. 1, pp. 85-116, ISSN 0352-2474, UDK: 903.5"637/638"(497.11)	1	3.00
M52	Rad u časopisu nacionalnog značaja Rad u časopisu nacionalnog značaja Petrović B., Stefanović S., Kojić S., Porčić M., Jevremov J., Stojanović G.: A pattern of metatarsal bovine bone surface alterations produced by human permanent teeth - An experimental approach, Journal of Archaeological Science: Reports, 2019, Vol. 27, ISSN 2352409X Jelenčiakova N., Petrović B., Kojić S., Jevremov J., Hinić S.: Application of Mathematical Models and Microfluidics in the Analysis of Saliva Mixing with Antiseptic Solutions, Balkan Journal of Dental Medicine, 2020, ISSN ?2335-0245	2	3.00
M53	Rad u naučnom časopisu Rad u naučnom časopisu Kojić S., Zeljković S., Čelanović N.: Modelovanje procesora za izbor topologije sistema energetske elektronike, Zbornik radova Fakulteta tehničkih nauka, 2010, Vol. 17, No. 25, pp. 3619-3622, ISSN 0350-428X Bobić Z., Terek P.: Karakterizacija topografije Ni-Ti ortodontske žice nakon izlaganja različitim korozionim medijumima, Zbornik radova Fakulteta tehničkih nauka, 2021, Vol. 1, No. 36, pp. 8-11, ISSN 0350-428X, UDK: 621.91	2	2.00
M61	Predavanje po pozivu sa skupa nacionalnog značaja štampano u celini Predavanje po pozivu sa skupa nacionalnog značaja štampano u celini Kojić S., Stojanović G., Vasiljević D., Samardžić N.: Mogućnosti ink-jet štampane elektronike, 1. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad, 12-13 Jun, 2013, pp. 35-38, ISBN 978-86-7892-512-2	1	1.50
M63	Saopštenje sa skupa nacionalnog značaja štampano u celini Saopštenje sa skupa nacionalnog značaja štampano u celini Kojić S., Bednar N., Vasiljević D., Radovanović M., Samardžić N.: Merenje i kontrola materijala u nanotehnologijama, 1. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad, 12-13 Jun, 2013, pp. 27-30, ISBN 978-86-7892-512-2 Puškar T., Vasiljević D., Šokac M., Radovanović M., Pivaš B., Kojić S., Mirković S.: Analiza mogućnosti za unapređenje i razvoj savremenih dijagnostičkih metoda za detekciju okluzalnih opterećenja, 10. International Scientific Conference ETIKUM, Novi Sad, 23-25 Jun, 2016, pp. 65-68, ISBN 978-86-7892-826-0 Vasiljević D., Kojić S., Medić D., Pivaš B., Tadić A., Mirković S., Radovanović M.: Cost-effective interdigitated capacitive sensor for measurement of staphylococcus aureus concentration in saline, 10. International Scientific Conference ETIKUM, Novi Sad, 23-25 Jun, 2016, pp. 109-112, ISBN 978-86-7892-826-0 Vasiljević D., Kojić S., Medić D., Pivaš B., Tadić A., Mirković S., Radovanović M.: Cost-effective interdigitated capacitive sensor for efficient bacteria detection, 15. International Symposium INFOTEH-JAHORINA (INFOTEH), Jahorina, 16-18 Mart, 2016, pp. 11-14	4	2.00
M64	Saopštenje sa skupa nacionalnog značaja štampano u izvodu Saopštenje sa skupa nacionalnog značaja štampano u izvodu Kojić S., Zeljković S., Čelanović N.: Modelovanje procesora za izbor topologije sistema energetske elektronike, 54. ETRAN - Konferencija za elektroniku, telekomunikacije, računarstvo, automatiku i nuklearnu tehniku, Donji Milanovac: 54. KONFERENCIJE ETRAN-a, 7-11 Jun, 2010, pp. 68-68 Marković J., Novotná A., Živaljević I., Kojić S., Petrović B., Đorđević A., Stefanović S.: Interdisciplinarni pristup analizi spaljenih ljudskih ostataka: primer nekropole sa lokaliteta Konopište, 41. Skupština i godišnji skup Srpskog arheološkog društva, Pančevo: Srpsko arheološko društvo; Narodni muzej Pančevo, 31-2 Maj, 2018, pp. 87-87, ISBN 978-86-80094-07-6	2	0.70
M71	Odbranjena doktorska disertacija Odbranjena doktorska disertacija Kojić S.: Design, Fabrication and Testing of Microfluidic Chips for Biomedical Application (Реализација и тестирање микрофлуидних чипова за примене у биомедицини), Novi Sad, Fakultet tehničkih nauka, 2022	1	6.00
M85	Prototip, nova metoda, softver, standardizovan ili atestiran instrument, Prototip, nova metoda, softver, standardizovan ili atestiran instrument, Radovanović M., Vasiljević D., Kojić S., Tadić A., Pivaš B., Medić D., Mirković S.: Određivanje tipa bakterija u fiziološkom rastvoru korišćenjem interdigitalnog kapacitivnog senzora, 2016	1	2.00
M92	Registrovan patent, soj, sorta ili rasa, arhitektonsko, građevinsko ili urbanističko autorsko delo Registrovan patent, soj, sorta ili rasa, arhitektonsko, građevinsko ili urbanističko autorsko delo Kojić S., Ajkalo S., Stojanović G., Gužvica M., Vasiljević D., Radovanović M.: Metod i sistem za senzorski podržano inteligentno praćenje stanja objekta na polici, Beograd, Glasnik intelektualne svojine, 2014, str. 18-19, ISBN 2217-9143 Radovanović M., Stojanović G., Kojić S.: VIŠESLOJNI MIKROFLUIDNI INDUKTOR MULTILAYER MICROFLUIDIC INDUCTOR, Beograd, Zavod za patente, 2021, str. 1-16, UDK: P-2019/0814	2	24.00