Prezime:	Šokac
Ime:	Mario
APVNT broj:	4782
Organizacija:	Fakultet tehničkih nauka u Novom Sadu

Produkcija - zbirni rezultati
Oznaka	Naziv kriterijuma produkcije	Broj	Poena
		90	197.00
M21	Rad u vrhunskom međunarodnom časopisu Rad u vrhunskom međunarodnom časopisu Budak I., Mirković S., Šokac M., Santoši Ž., Puškar T., Vukelić Đ.: An approach to modelling of personalized bone grafts based on advanced technologies, International Journal of Simulation Modelling, 2016, Vol. 15, No. 4, pp. 637-648, ISSN 1726-4529 Budak I., Kiralj A., Šokac M., Santoši Ž., Eggbeer D., Peel S.: Computer-aided methods for single-stage fibrous dysplasia excision and reconstruction in the zygomatico- orbital complex, Rapid Prototyping Journal, 2019, ISSN 1355-2546 Santoši Ž., Budak I., Stojaković V., Šokac M., Vukelić Đ.: Evaluation of synthetically generated patterns for image-based 3D reconstruction of texture-less objects, Measurement, 2019, Vol. 147, ISSN 0263-2241 Šokac M., Budak I., Katić M., Jakovljević Ž., Santoši Ž., Vukelić Đ.: Improved surface extraction of multi-material components for single-source industrial X-ray computed tomography, Measurement, 2020, Vol. 153, ISSN 0263-2241 Šokac M., Budak I., Puškar T., Mirković S., Santoši Ž., Kuzmanović M., Vukelić Đ.: Investigation of radiation level and assessment of dimensional accuracy of acquired CBCT images, Measurement, 2020, Vol. 155, ISSN 0263-2241 Đurović Koprivica D., Puškar T., Budak I., Šokac M., Jeremić-Knežević M., Maletin (Anđelković) A., Milekić (rođ. Jefić) B., Vukelić Đ.: Influence of implant impression methods, polymer materials, and implant angulation on the accuracy of dental models, Polymers, 2022, Vol. 14, No. 14, ISSN 2073-4360 Tadić A., Bajkin B., Mijatov I., Mirnić (Računica) J., Vukoje K., Šokac M., Vukelić Đ.: Influence of leukocyte- and platelet-rich fibrin on bone tissue healing after mandibular third molar surgical extraction, Article Number: 4823, Applied Sciences, 2023, Vol. 13, No. 8, ISSN 2076-3417 Jovičić G., Milošević A., Kanović Ž., Šokac M., Šimunović G., Savković B., Vukelić Đ.: Optimization of Dry Turning of Inconel 601 Alloy Based on Surface Roughness, Tool Wear, and Material Removal Rate, Article Number: 1068, Metals, 2023, Vol. 13, No. 6, ISSN 2075-4701	8	64.00
M21a	Rad u međunarodnom časopisu izuzetnih vrednosti Rad u međunarodnom časopisu izuzetnih vrednosti Milošević A., Šimunović G., Kanović Ž., Šimunović K., Santoši Ž., Šokac M., Vukelić Đ.: Comprehensive evaluation of dimensional deviation, flank wear, surface roughness and material removal rate in dry turning of C45 steel, Facta universitatis - series: Mechanical Engineering, 2024, ISSN 0354–2025	1	10.00
M22	Rad u istaknutom međunarodnom časopisu Rad u istaknutom međunarodnom časopisu Santoši Ž., Šokac M., Korolija-Crkvenjakov D., Kosec B., Soković M., Budak I.: Reconstruction of 3D models of cast sculptures using close range photogrammetry, Metalurgija, 2015, Vol. 54, No. 4, pp. 695-698, ISSN 0543-5846, UDK: 669.35.6:739.5.? i2.7:620.18=111 Santoši Ž., Budak I., Šokac M., Hadžistević M., Vukelić Đ.: Influence of high dynamic range images on the accuracy of the photogrammetric 3D digitization: A case study, Advances in Production Engineering and Management, 2019, Vol. 14, No. 3, pp. 391-399, ISSN 1854-6250 Vukelić Đ., Kanović Ž., Šokac M., Santoši Ž., Budak I., Tadić B.: Modelling of micro-turning process based on constant cutting force, International Journal of Simulation Modelling, 2021, Vol. 20, No. 1, pp. 146-157, ISSN 1726-4529 Bijelic I., Milovanovic V., Vukelić Đ., Simunovic G., Prica M., Šokac M., Tadic B.: Application of Natrium Silicate as a Phase Change Material in Fixture Design, Tehnički vjesnik - Technical Gazette, 2023, Vol. 30, No. 2, pp. 465-473, ISSN 1330-3651 Vukelić Đ., Šimunović K., Ivanov V., Šokac M., Kočović V., Santoši Ž., Šimunović G.: Modelling of flank and crater wear during dry turning of AISI 316L stainless steel as a function of tool geometry using the response surface design, Tehnički vjesnik - Technical Gazette, 2024, Vol. 31, No. 4, pp. 1376-1384, ISSN 1330-3651	5	25.00
M23	Rad u međunarodnom časopisu Rad u međunarodnom časopisu Mirković S., Budak I., Puškar T., Tadić A., Šokac M., Santoši Ž., Đurđević Mirković T.: Application of modern Computer-Aided Technologies in the production of individual bone graft: A case report, Vojnosanitetski pregled, 2015, Vol. 72, No. 12, pp. 1126-1131, ISSN 0042-8450 Budak I., Santoši Ž., Stojaković V., Korolija-Crkvenjakov D., Obradović R., Milošević M., Šokac M.: Development of Expert System for the Selection of 3D Digitization Method in Tangible Cultural Heritage, Tehnički vjesnik - Technical Gazette, 2019, Vol. 26, No. 3, pp. 837-844, ISSN 1330-3651 Šokac M., Vukelić Đ., Jakovljević Ž., Santoši Ž., Hadžistević M., Budak I.: Fuzzy Hybrid Method for Reconstruction of 3D Models Based on CT/MRI Data, Strojniski vestnik - Journal of Mechanical Engineering, 2019, Vol. 65, No. 9, pp. 482-494, ISSN 0039-2480 Vlatković Jakovljević I., Todorović A., Budak I., Šokac M., Miličić B., Špadijer Gostović A.: Measurement of dental crown wear - In vitro study, Dental Materials Journal, 2020, Vol. 39, No. 1, pp. 126-134, ISSN 0287-4547 Agarski B., Šokac M., Santoši Ž., Vukelić Đ., Budak I.: Multi-Criteria Evaluation of Design Complexity for Patient-Specific Bone Graft, Tehnički vjesnik - Technical Gazette, 2020, Vol. 27, No. 3, pp. 803-811, ISSN 1330-3651 Santoši Ž., Budak I., Šokac M., Kuzmanović M., Vukelić Đ.: An innovative photogrammetric system for 3D digitization of dental models, Tehnički vjesnik - Technical Gazette, 2022, Vol. 29, No. 5, pp. 1560-1566, ISSN 1330-3651	6	18.00
M24	Rad u časopisu međunarodnog značaja verifikovanog posebnom odlukom Rad u časopisu međunarodnog značaja verifikovanog posebnom odlukom Santoši Ž., Budak I., Šokac M., Puškar T., Vukelić Đ., Trifković B.: 3D digitization of featureless dental models using close range photogrammetry aided by noise based patterns, Facta universitatis - series: Mechanical Engineering, 2018, Vol. 16, No. 3, pp. 297-305, ISSN 0354–2025 Santoši Ž., Budak I., Šokac M., Pavletić D.: Bridging the Symmetry-related Gap between Physical and Digital Sculpting by Application of Reverse Engineering Modeling , FME Transactions, 2019, Vol. 47, No. 2, pp. 304-309, ISSN 1451-2092	2	6.00
M31	Predavanje po pozivu sa međunarodnog skupa štampano u celini Predavanje po pozivu sa međunarodnog skupa štampano u celini Budak I., Mirković S., Šokac M., Puškar T.: Application of advanced engineering systems in design and fabrication of custom-made bone grafts, 1. International Scientific Conference on Dentistry, Novi Sad: Stylos doo Novi Sad, 17-19 May, 2016, pp. 60-65, ISBN 978-86-7473-59 Šokac M., Eggbeer D., Santoši Ž., Durakbasa N., Budak I.: Overview of 3D digitizing and designing methods used for custom dental medical models, 6. International Scientific Conference in Dentistry, Novi Sad: Dentistry Clinic of Vojvodina, 2-3 April, 2022, pp. 115-121, ISBN 978-86-80894-05-8	2	6.00
M33	Saopštenje sa međunarodnog skupa štampano u celini Saopštenje sa međunarodnog skupa štampano u celini Šokac M., Santoši Ž., Puškar T., Mirković S., Soković M., Budak I.: Application of Different Segmentation Approaches on CB-CT Images for the Reconstruction of 3D Model of Mandible, 6. International Scientific and Expert Conference TEAM, Kečkemet: Kecskemét College, Faculty of Mechanical Engineering and Automation, 10-11 November, 2014, pp. 405-409, ISBN 978-615-5192-22-7 Spasić A., Vučaj-Ćirilović V., Movrin D., Šokac M., Budak I., Til V.: CT density of the cortical bone of alveolar process of maxilla, 12. International Scientific Conference "Flexible Technologies" - MMA, Andrevlje: Fakultet tehničkih nauka, 25-26 September, 2015, pp. 243-246, ISBN 978-86-7892-722-5 Šokac M., Margan V., Car Z., Budak I.: Comparative analysis and evaluation of measurement capabilities of contact and non-contact devices , 555. International Conference on Innovative Technologies – In-Tech 2016, Prag: Faculty of Engineering, University of Rijeka, 6-8 September, 2016, pp. 263-266, ISBN 1849-0662 Santoši Ž., Budak I., Šokac M., Vukelić Đ.: Influence of surface quality on 3D digitization results obtained by close-range photogrammetry, 15. International Conference on Tribology - SERBIATRIB, Kragujevac: University of Kragujevac, Faculty of Engineering , 17-19 May, 2017, pp. 566-570, ISBN 978-86-6335-041-0 Šokac M., Santoši Ž., Budak I., Vukelić Đ., Puškar T.: Improvement and development of modern diagnostic method in dentistry using advanced 3D digitizing systems, 8. PSU-UNS International Conference on Engineering and Technology - ICET, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, 8-10 June, 2017, pp. 1-4, ISBN 978-86-7892-933-5 Šokac M., Santoši Ž., Budak I., Car Z., Vukelić Đ.: Combination of contact and optical 3D digitizing methods for their application in reverse engineering, 8. International Conference on Innovative Technologies IN-TECH, Ljubljana: Faculty of Mechanical Engineering, 11-13 September, 2017, pp. 65-68, ISBN 0184-9069 Santoši Ž., Šokac M., Puškar T., Budak I.: Comparative Analysis of Full Frame and APS-C Camera Sensors on 3D Digitization Results, 15. IEEE East-West Design & Test Symposium - EWDTS, Novi Sad: The Institute of Electrical and Electronics Engineers, 29-2 September, 2017, pp. 323-327, ISBN 978-1-5386-3298-7 Katić M., Šokac M., Budak I.: Application of computed tomography on multi-material objects, 17. International Conference on Materials: corrosion, heat treatment, materials testing and tribology - MTECH, Zadar: Hrvatsko društvo za materijale i tribologiju, 4-7 October, 2017, pp. 217-222, ISBN 2584-4334 Šokac M., Budak I., Santoši Ž., Kadvany K., Puškar T., Vukelić Đ.: Emergence of new technologies in the designing and fabrication of patient-specific removable partial dentures (RPDs): A case study, 8. International Conference on Information Society and Technology – ICIST, Kopaonik: Society for Information Systems and Computer Networks, 11-14 March, 2018, pp. 94-99, ISBN 978-86-8552-516-2 Santoši Ž., Budak I., Šokac M.: Reverse engineering modeling as a tool of digital sculpting, 6. International Scientific Conference moNGeometrija, Novi Sad: Serbian Society for Geometry and Graphics (SUGIG) and Faculty of Technical Sciences, University of Novi Sad, 6-9 June, 2018, pp. 359-362, ISBN 978-86-6022-055-6 Santoši Ž., Šokac M., Tadić B., Budak I., Šimunović G., Ilić Mićunović M., Vukelić Đ.: Evaluation of kinetic friction coefficient for wooden specimens, 13. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 28-29 September, 2018, pp. 153-156, ISBN 978-86-6022-094-5 Šokac M., Miljanović D., Santoši Ž., Vukelić Đ., Budak I.: Application of 3D Technologies for Design and Fabrication of Mandibular Implant: A Case Study, 8. Young Biomedical Engineers and Researchers Conference - YBERC, Košice: Faculty of Mechanical Engineering, 3-5 October, 2018, pp. 185-189, ISBN 978-80-8086-271-8 Vukelić Đ., Santoši Ž., Šokac M., Budak I., Šarić T., Šimunović G., Tadić B.: Evaluation of the kinetic friction coefficient by using „disc-block“ friction pair of different wooden samples, 16. International Conference on Tribology - SERBIATRIB, Kragujevac: Faculty of Engineering, 15-17 May, 2019, pp. 287-292, ISBN 2620-2832 Santoši Ž., Šokac M., Vukelić Đ., Budak I.: 3D Reconstruction of Patient-Specific Dental Bone Grafts by Application of Reverse Engineering Modeling, 9. International Conference on Information Science and Technology (ICIST), Kopaonik: Society for Information Systems and Computer Networks, 10-13 March, 2019, pp. 192-195 Šokac M., Santoši Ž., Vukelić Đ., Katić M., Durakbasa N., Budak I.: Enhancement of Images from Industrial X-Ray Computed Tomography Systems by Hybrid Approach, 19. International Symposium for Production Research - ISPR, Beč, 28-30 August, 2019, pp. 138-146, ISBN 978-3-030-31342-5 Matin I., Vukelić Đ., Štrbac B., Šokac M., Hadžistević M.: Determination of injection molding parameters for production of plastic cover , 9. International Conference Industrial Engineering and Environmental Protection - IIZS, Zrenjanin, 3-4 October, 2019, pp. 71-78, ISBN 978-86-7672-324-9 Šokac M., Santoši Ž., Vukelić Đ., Katić M., Durakbasa N., Budak I.: Geometric Tolerancing Analysis of Multi-material Components (MMCs) Obtained by Industrial X-Ray Computed Tomography, 20. International Symposium for Production Research - ISPR, Antalya: Springer, 24-27 September, 2020, pp. 607-613, ISBN 978-3-030-62783-6 Santoši Ž., Šokac M., Budak I., Vukelić Đ.: Investigation of different circular image acquisition methods in close-range photogrammetry - virtual approach, 14. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 23-25 September, 2021, pp. 87-90, ISBN 978-86-6022-364-9 Šokac M., Katić M., Santoši Ž., Vukelić Đ., Budak I., Durakbasa N.: Investigation of Influence by Different Segmentation Parameters on Surface Accuracy in Industrial X-ray Computed Tomography, 21. International Symposium for Production Research - ISPR, Antalya: Springer, 7-9 October, 2021, pp. 202-209, ISBN 978-3-030-90420-3 Puškar N., Puškar M., Šokac M., Santoši Ž., Kuzmanović M., Budak I., Vukelić Đ.: Analysis of surface roughness and static friction coefficient of Co-Cr-Mo alloy for removable partial deture framework, 18. International Conference on Tribology - SERBIATRIB, Kragujevac: Serbian Tribology Society and Faculty of Engineering, 17-19 May, 2023, pp. 668-674, ISBN 978-86-6335-103-5 Jovičić G., Milošević A., Šokac M., Santoši Ž., Kočović V., Šimunović G., Vukelić Đ.: The modelling of surface roughness after the turning of inconel 601 by using artificial neural network, 18. International Conference on Tribology - SERBIATRIB, Kragujevac: Serbian Tribology Society and Faculty of Engineering, 17-19 May, 2023, pp. 779-788, ISBN 978-86-6335-103-5 Santoši Ž., Šokac M., Milošević A., Ivanov V., Vukelić Đ.: 3D reconstruction of machine vise by application of photogrammetry and reverse engineering , 15. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, University of Novi Sad, 24-26 September, 2024, pp. 123-126, ISBN 978-86-6022-681-7 Milošević A., Kočović V., Santoši Ž., Šokac M., Šimunović G., Tadić B., Vukelić Đ.: Modelling the boring process on the basis of centrifugal force using a specially designed tool holder, 15. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 24-26 September, 2024, pp. 95-98, ISBN 978-86-6022-681-7	23	23.00
M34	Saopštenje sa međunarodnog skupa štampano u izvodu Saopštenje sa međunarodnog skupa štampano u izvodu Puškar T., Budak I., Šokac M., Santoši Ž., Laban Terzija J., Vukelić Đ.: Personalized Bone Grafts Design by Application of Computer Aided Technologies, 1. International Association for Dental Research, London, 2018, pp. 3372-3372	1	0.50
M51	Rad u vodećem časopisu nacionalnog značaja Rad u vodećem časopisu nacionalnog značaja Šokac M., Budak I., Mirković S., Santoši Ž., Movrin D., Puškar T.: The role of advanced 3D technologies and additive manufacturing in designing and manufacturing of customized bone grafts, Journal for Technology of Plasticity, 2017, Vol. 42, No. 2, pp. 33-45, ISSN 0354-3870, UDK: 621.7	1	2.00
M52	Rad u časopisu nacionalnog značaja Rad u časopisu nacionalnog značaja Šokac M., Budak I., Ralević N., Soković M., Santoši Ž.: Accuracy analysis of clustering algorithms for segmentation of industrial CT images, Journal of Production Engineering, 2015, Vol. 18, No. 1, pp. 65-68, ISSN 1821-4932, UDK: 621 Tadić A., Mirković S., Puškar T., Šokac M., Budak I.: Implant planning therapy based on CBCT images of the radiosensitive teeth, Journal of Production Engineering, 2015, Vol. 18, No. 1, pp. 69-72, ISSN 1821-4932, UDK: 621 Puškar S., Šokac M., Milovančev (Ilić) A., Budak I.: Application of multidetector computer tomography in acquisition of coronary arteries, Journal of Production Engineering, 2016, Vol. 19, No. 2, pp. 73-76, ISSN 1821-4932, UDK: 621 Santoši Ž., Šokac M., Ralević N., Budak I., Dramićanin M.: Application of fuzzy logic as a tool for improving the quality of photography by shape from focus/defocus 3D digitization, Journal of Production Engineering, 2016, Vol. 19, No. 2, pp. 61-64, ISSN 1821-4932 Šokac M., Budak I., Santoši Ž., Balaž B., Milutinović M.: Redesign of robotic arm by the application of reverse engineering and rapid prototyping technologies, Machine Design, 2017, Vol. 9, No. 3, pp. 93-98, ISSN 1821-1259 Vukelić Đ., Šokac M., Budak I., Šarić T., Matin I., Santoši Ž., Šimunović G.: Fixtures design for thin-walled cylindrical workpieces on the principles of group technology, Journal of Production Engineering, 2019, Vol. 22, No. 1, pp. 25-28, ISSN 1821-4932	6	9.00
M53	Rad u naučnom časopisu Rad u naučnom časopisu Šokac M., Budak I.: Analiza uticaja parametara conebeam kompjuterizovane tomografije na rezultate 3D digitalizacije, Zbornik radova Fakulteta tehničkih nauka, 2013, Vol. 28, No. 11, pp. 1977-1980, ISSN 0350-428X Šokac M., Budak I., Miljanović D., Santoši Ž., Vukelić Đ.: Computer-aided modeling and additive manufacturing fabrication of patient-specific mandibular implant, Clinician and Technology, 2018, Vol. 48, No. 4, pp. 113-117, ISSN 0301-5491 Mijuk A., Šokac M.: Analiza biotriboloških karakteristika i odnosa između metalne vođice i hirurškog gajdera , Zbornik radova Fakulteta tehničkih nauka, 2023, Vol. 38, No. 4, pp. 556-559, ISSN 0350-428X, UDK: 004.65:61 Abeer M., Šokac M.: Ispitivanje biotribološкih i dimenzionalnih karakteristiкa polimetilmetaкrilata za primenu u dentalnoj protetici, Zbornik radova Fakulteta tehničkih nauka, 2023, Vol. 38, No. 4, pp. 560-563, ISSN 0350-428X, UDK: 004.65:61	4	4.00
M63	Saopštenje sa skupa nacionalnog značaja štampano u celini Saopštenje sa skupa nacionalnog značaja štampano u celini Šokac M., Santoši Ž., Spasić A., Til V., Vučaj-Ćirilović V., Govorčin M., Budak I.: Reverzibilno inženjersko modeliranje dentalnih nadoknada na bazi multi-slajs kompjuterizovane tomografije u programskom sistemu 3D Doctor, 1. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Fakultet tehničkih nauka, 12-13 Jun, 2013, pp. 63-66, ISBN 978-86-7892-512-2 Šokac M., Santoši Ž., Puškar T., Vučaj-Ćirilović V., Budak I.: Primena različitih modela segmentacije CBCT snimaka kod rekonstrukcije 3D modela donje vilice, 9. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Fakultet tehničkih nauka, 19-20 Jun, 2014, pp. 119-122, ISBN 978-86-7892-616-7 Santoši Ž., Šokac M., Trifković B., Til V., Budak I.: Rekonstrukcija 3D modela ljudske vilice primenom fotogrametrijske metode, 9. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Fakultet tehičkih nauka, 19-20 Jun, 2014, pp. 115-118, ISBN 978-86-7892-616-7 Antonov M., Potran M., Šokac M., Todorović A., Jevremović D., Puškar T., Trifković B.: Uređaji za instrumentalno određivanje boje zuba, 9. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Fakultet tehničkih nauka, 19-20 Jun, 2014, pp. 103-108, ISBN 978-86-7892-616-7 Vuletić J., Marković D., Šokac M., Santoši Ž., Tadić A., Mirković S.: Ispitivanje biokompatibilnosti AM materijala za primenu u stomatološkoj protetici, 9. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Fakultet tehničkih nauka, 19-20 Jun, 2014, pp. 87-90, ISBN 978-86-7892-616-7 Santoši Ž., Budak I., Trifković B., Šokac M., Soković M., Hodolič J.: 3D digitalizacija stomatoloških modela blisko-predmetnom fotogrametrijom potpomognutom projektovanom svetlošću, 9. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Fakultet tehničkih nauka , 19-20 Jun, 2015, pp. 29-32, ISBN 978-86-7892-712-6 Vicko K., Potran M., Petrović B., Šokac M., Puškar T.: Cone beam kompjuterizovana tomografija (CBCT) i njena primena u stomatologiji, 9. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad, 19-20 Jun, 2015, UDK: 978-86-7892-712-6 Tadić A., Mirković S., Puškar T., Budak I., Šokac M.: Upotreba CBCT snimaka sa radiosenzitivnim zubima u planiranju implantološke terapije – prikaz slučaja, 9. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Fakultet tehničkih nauka, 19-20 Jun, 2015, pp. 1-4, ISBN 978-86-7892-713-3 Šokac M., Budak I., Ralević N., Spasić A., Santoši Ž., Vučaj-Ćirilović V., Til V.: Primena metode klasterizacije C-srednjih vrednosti kod segmentacije medicinskih snimaka, 9. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Fakultet tehničkih nauka, 19-20 Jun, 2015, pp. 33-36, ISBN 978-86-7892-713-3 Santoši Ž., Šokac M., Budak I., Ralević N., Dramićanin M.: Primena fazi logike kao alata za poboljšanje kvaliteta fotografija kod 3D digitalizacije fokusiranjem defokusiranjem, 10. International Scientific Conference ETIKUM, Novi Sad: Faculty of Technical Sciences, Department of Production Engineering, 23-25 Jun, 2016, pp. 17-20, ISBN 978-86-7892-825-3 Puškar T., Vasiljević D., Šokac M., Radovanović M., Pivaš B., Kojić S., Mirković S.: Analiza mogućnosti za unapređenje i razvoj savremenih dijagnostičkih metoda za detekciju okluzalnih opterećenja, 10. International Scientific Conference ETIKUM, Novi Sad, 23-25 Jun, 2016, pp. 65-68, ISBN 978-86-7892-826-0 Puškar S., Milovančev (Ilić) A., Vulin (rođ. Jovelić) A., Budak I., Šokac M.: Primena tehnologije multidetektorskog skenera za snimanje koronarnih krvnih sudova, 10. International Scientific Conference ETIKUM, Novi Sad: Fakultet tehničkih nauka u Novom Sadu, 23-25 Jun, 2016, pp. 69-72, ISBN 978-86-7892-825-3 Spasić A., Lainović T., Bogdanović M., Blažić L., Šokac M., Til V.: Gustina i arhitektonika trabekularne kosti mandibule – MSCT studija, 10. International Scientific Conference ETIKUM, Novi Sad: Fakultet tehničkih nauka u Novom Sadu, 23-25 Jun, 2016, pp. 93-96, ISBN 978-86-7892-825-3 Budak I., Šokac M., Santoši Ž.: Primena reverzibilnog inženjerskog modelovanja kod dizajniranja proizvoda, 1. Konferencija sa međunarodnim učešćem "Primena novih tehnologija i ideja u školskom inženjerskom obrazovanju", Požega (Užička): Tehnička škola , 15-16 Maj, 2017, pp. 109-112, ISBN 978-86-915487-1-1 Laban Terzija J., Milekić (rođ. Jefić) B., Puškar T., Mirković S., Pivaš B., Santoši Ž., Santoši Ž., Šokac M., Budak I., Šokac M.: Rešavanje problema retencije i stabilizacije gornje totalne proteze pomoću implanata, 11. International Scientific Conference ETIKUM, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, 6-8 Decembar, 2017, pp. 145-148, ISBN 978-86-6022-00-68 Šokac M., Budak I., Santoši Ž., Spasić A., Jakovljević Ž.: Uloga statističkih evaluatora i njihova primena kod analize tačnosti segmentiranih medicinskih snimaka , 11. International Scientific Conference ETIKUM, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, 6-8 Decembar, 2017, pp. 153-156, ISBN 978-86-6022-00-68 Budak I., Santoši Ž., Šokac M.: Metode 3D digitalizacije u studijskim programima na Fakultetu tehničkih nauka u Novom Sadu, 24. Trendovi razvoja - TREND, Kopaonik: Fakultet tehničkih nauka Univerziteta u Novom Sadu, 21-23 Februar, 2018, pp. 1-4, ISBN 978-86-7892-99 Matin I., Vukelić Đ., Hadžistević M., Štrbac B., Santoši Ž., Šokac M., Kulundžić N.: Računarom podržan integrisan pristup parametarskom projektovanju plastičnog proizvoda i alata, 12. International Scientific Conference ETIKUM, Novi Sad: Fakultet tehničkih nauka, 6-8 Decembar, 2018, pp. 69-72, ISBN 978-86-6022-123-2 Šokac M., Budak I., Jakovljević Ž., Santoši Ž., Vukelić Đ.: Pregled stanja i analiza najčešće primenjivanih metoda za segmentaciju slike, 12. International Scientific Conference ETIKUM, Novi Sad: Fakultet tehničkih nauka, 6-8 Decembar, 2018, pp. 81-84, ISBN 978-86-6022-123-2 Ilić Mićunović M., Kosec B., Budak I., Kojić V., Santoši Ž., Agarski B., Šokac M.: Ispitivanje karakteristika mikrostrukture koštanog grafta primenom ImageJ softvera, 12. International Scientific Conference ETIKUM, Novi Sad: ?Faculty of Technical Sciences, 6-8 Decembar, 2018, pp. 117-120, ISBN 978-86-6022-123-2 Šokac M., Đurović Koprivica D., Kuzmanović M., Santoši Ž., Vukelić Đ., Radumilo D., Budak I.: Preliminarna studija određivanja pozicije baze implantata sa ciljem njihove analize i merenja, 13. International Scientific Conference ETIKUM, Novi Sad: Fakultet tehničkih nauka, 2-4 Decembar, 2021, pp. 189-192, ISBN 978-86-6022-387-8 Jovičić G., Milošević A., Šokac M., Santoši Ž., Kočović V., Šimunović G., Vukelić Đ.: Evaluation of tool wear and surface roughness during dry turning of Inconel 601 with PVD and CVD inserts, 2. Konferencija sa međunarodnim učešćem "Napredne tehnologije u obrazovanju i privredi", Vrnjačka Banja: Visoka tehnička škola strukovnih studija, 30-31 Maj, 2023, pp. 1-8, ISBN 978-86-6211-145-6 Santoši Ž., Ranisavljev M., Šokac M., Vukelić Đ.: Analysis of the scanning spray layer thickness using the focus variation method, 39. International Conference of Production Engineering - ICPE-S, Novi Sad: Fakultet tehničkih nauka u Novom Sadu, 26-27 Oktobar, 2023, pp. 377-381, ISBN 978-86-6022-610-7 Jovičić G., Kanović Ž., Šokac M., Santoši Ž., Mitrović S., Šimunović G., Vukelić Đ.: Modelling of surface roughness and tool wear during the turning of inconel 601 alloy using artificial neural networks, 14. International Scientific Conference ETIKUM, Novi Sad: Faculty of Technical Sciences, 7-9 Decembar, 2023, pp. 29-32, ISBN 978-86-6022-618-3 Milošević A., Agarski B., Šokac M., Šimunović G., Kočović V., Vukelić Đ.: Implementation of life cycle assessment in the design process of fixture for reducer housing machining, 14. International Scientific Conference ETIKUM, Novi Sad: Faculty of Technical Sciences, 7-9 Decembar, 2023, pp. 85-88, ISBN 978-86-6022-618-3 Šokac M., Katić M., Milošević A., Ranisavljev M., Santoši Ž., Vukelić Đ.: Primena industrijskog CT-a kao alata za dimenzionalnu analizu i detekciju defekata kod odlivaka, 14. International Scientific Conference ETIKUM, Novi Sad: Fakultet tehničkih nauka, 7-9 Decembar, 2023, pp. 121-124, ISBN 978-86-6022-618-3 Ranisavljev M., Štrbac B., Santoši Ž., Šokac M., Matin I., Hadžistević M., Jotić G.: APPLICATION OF SEGMENTATION ALGORITHMS FOR MONO AND MULTI-MATERIAL COMPONENTS IN COMPUTED TOMOGRAPHY, 14. International Scientific Conference ETIKUM, Novi Sad, 7-9 Decembar, 2023, pp. 105-108, ISBN 978-86-6022-617-6	27	13.50
M71	Odbranjena doktorska disertacija Odbranjena doktorska disertacija Šokac M.: Hibridni model za segmentaciju snimaka generisanih primenom kompjuterizovane tomografije, Novi Sad, Univerzitet u Novom Sadu, Fakultet tehničkih nauka, 2019, str. 1-151	1	6.00
M82	Nova proizvodna linija, novi materijal, industrijski prototip, Nova proizvodna linija, novi materijal, industrijski prototip, Šokac M., Budak I., Jakovljević Ž., Vukelić Đ., Santoši Ž.: Programski sistem za segmentaciju snimaka generisanih primenom kompjuterizovane tomografije, 2020	1	6.00
M85	Prototip, nova metoda, softver, standardizovan ili atestiran instrument, Prototip, nova metoda, softver, standardizovan ili atestiran instrument, Santoši Ž., Budak I., Trifković B., Šokac M., Vukelić Đ., Hadžistević M., Hodolič J.: Nova metoda za akviziciju geometrijskih podataka u dentalnoj protetici na bazi blisko-predmetne fotogrametrije, 2015 Šokac M., Budak I., Mirković S., Puškar T., Santoši Ž.: Metod za modelovanje kastomizovanih koštanih graftova u stomatologiji, 2015	2	4.00