Prezime:	Vukelić
Ime:	Đorđe
APVNT broj:	377
Organizacija:	Fakultet tehničkih nauka u Novom Sadu

Produkcija - zbirni rezultati
Oznaka	Naziv kriterijuma produkcije	Broj	Poena
		384	939.50
M21	Rad u vrhunskom međunarodnom časopisu Rad u vrhunskom međunarodnom časopisu Tadić B., Todorović P., Vukelić Đ., Jeremić B.: Failure analysis and effects of redesign of a polypropylene yarn twisting machine, Engineering Failure Analysis, 2011, Vol. 18, No. 5, pp. 1308-1321, ISSN 1350-6307 Tadić B., Jeremić B., Todorović P., Vukelić Đ., Proso U., Mandić V., Budak I.: Efficient workpiece clamping by indenting cone-shaped elements, International Journal of Precision Engineering and Manufacturing, 2012, Vol. 13, No. 10, pp. 1725-1735, ISSN 2234-7593 Budak I., Vukelić Đ., Bračun D., Hodolič J., Soković M.: Pre-Processing of Point-Data from Contact and Optical 3D Digitization Sensors, Sensors, 2012, Vol. 12, No. 1, pp. 1100-1126, ISSN 1424-8220 Tadić B., Todorović P., Lužanin O., Miljanić D., Jeremić B., Bogdanović B., Vukelić Đ.: Using specially designed high-stiffness burnishing tool to achieve high-quality surface finish, International Journal of Advanced Manufacturing Technology, 2013, Vol. 67, No. 1-4, pp. 601-611, ISSN 0268-3768 Puškar T., Jevremović D., Williams R., Eggbeer D., Vukelić Đ., Budak I.: A comparative analysis of the corrosive effect of artificial saliva of variable pH on DMLS and cast Co-Cr-Mo dental alloy, Materials, 2014, Vol. 7, No. 9, pp. 6486-6501, ISSN 1996-1944 Tadić B., Vukelić Đ., Miljanić D., Bogdanović B., Mačužić I., Budak I., Todorović P.: Model testing of fixture-workpiece interface compliance in dynamic conditions, Journal of Manufacturing Systems, 2014, Vol. 33, No. 1, pp. 76-83, ISSN 0278-6125 Trifković B., Budak I., Todorović A., Vukelić Đ., Lazić V., Puškar T.: Comparative analysis on measuring performances of dental intraoral and extraoral optical 3D digitization systems, Measurement, 2014, Vol. 47, No. 1, pp. 45-53, ISSN 0263-2241 Ranđelović S., Tadić B., Todorović P., Vukelić Đ., Miloradović D., Radenković M., Tsiafis C.: Modelling of the ball burnishing process with a high-stiffness tool, International Journal of Advanced Manufacturing Technology, 2015, Vol. 81, No. 9, pp. 1509-1518, ISSN 0268-3768 Todorović P., Tadić B., Vukelić Đ., Jeremić M., Ranđelović S., Nikolić R.: Analysis of the influence of loading and the plasticity index on variations in surface roughness between two flat surfaces, Tribology International, 2015, Vol. 81, pp. 276-282, ISSN 0301-679X Tadić B., Ranđelović S., Todorović P., Živković J., Kočović V., Budak I., Vukelić Đ.: Using a high-stiffness burnishing tool for increased dimensional and geometrical accuracies of openings, Precision Engineering: Journal of the International Societies for Precision Engineering and Nanotechnology, 2016, Vol. 43, pp. 335-344, ISSN 0141-6359 Budak I., Mirković S., Šokac M., Santoši Ž., Puškar T., Vukelić Đ.: An approach to modelling of personalized bone grafts based on advanced technologies, International Journal of Simulation Modelling, 2016, Vol. 15, No. 4, pp. 637-648, ISSN 1726-4529 Matin I., Hadžistević M., Vukelić Đ., Potran M., Brajlih T.: Development of an expert system for the simulation model for casting metal substructure of a metal-ceramic crown design, Computer Methods and Programs in Biomedicine, 2017, Vol. 146, pp. 27-35, ISSN 0169-2607 Agarski B., Vukelić Đ., Ilić Mićunović M., Budak I.: Evaluation of the environmental impact of plastic cap production, packaging, and disposal, Journal of Environmental Management, 2019, Vol. 245, pp. 55-65, ISSN 0301-4797 Santoši Ž., Budak I., Stojaković V., Šokac M., Vukelić Đ.: Evaluation of synthetically generated patterns for image-based 3D reconstruction of texture-less objects, Measurement, 2019, Vol. 147, ISSN 0263-2241 Šokac M., Budak I., Katić M., Jakovljević Ž., Santoši Ž., Vukelić Đ.: Improved surface extraction of multi-material components for single-source industrial X-ray computed tomography, Measurement, 2020, Vol. 153, ISSN 0263-2241 Šokac M., Budak I., Puškar T., Mirković S., Santoši Ž., Kuzmanović M., Vukelić Đ.: Investigation of radiation level and assessment of dimensional accuracy of acquired CBCT images, Measurement, 2020, Vol. 155, ISSN 0263-2241 Šimunović K., Havrlišan S., Šarić T., Vukelić Đ.: Modeling and Optimization in Investigating Thermally Sprayed Ni-Based Self-Fluxing Alloy Coatings: A Review, Materials, 2020, Vol. 13, No. 20, pp. 1-27, ISSN 1996-1944 Vukelić Đ., Šimunović K., Kanović Ž., Šarić T., Tadić B., Šimunović G.: Multi–objective optimization of steel AISI 1040 dry turning using genetic algorithm, Neural Computing and Applications, 2021, ISSN 0941-0643 Kostić S., Miljojković J., Šimunović G., Vukelić Đ., Tadić B.: Uncertainty in the determination of elastic modulus by tensile testing, Engineering Science and Technology, an International Journal, 2022, Vol. 25, ISSN 2215-0986 Đurović Koprivica D., Puškar T., Budak I., Šokac M., Jeremić-Knežević M., Maletin (Anđelković) A., Milekić (rođ. Jefić) B., Vukelić Đ.: Influence of implant impression methods, polymer materials, and implant angulation on the accuracy of dental models, Polymers, 2022, Vol. 14, No. 14, ISSN 2073-4360 Kanović Ž., Vukelić Đ., Šimunović K., Prica M., Šarić T., Tadić B., Šimunović G.: The Modelling of Surface Roughness after the Ball Burnishing Process with a High-Stiffness Tool by Using Regression Analysis, Artificial Neural Networks, and Support Vector Regression, Article Number: 320, Metals, 2022, Vol. 12, No. 2, ISSN 2075-4701 Tadić A., Bajkin B., Mijatov I., Mirnić (Računica) J., Vukoje K., Šokac M., Vukelić Đ.: Influence of leukocyte- and platelet-rich fibrin on bone tissue healing after mandibular third molar surgical extraction, Article Number: 4823, Applied Sciences, 2023, Vol. 13, No. 8, ISSN 2076-3417 Jovičić G., Milošević A., Kanović Ž., Šokac M., Šimunović G., Savković B., Vukelić Đ.: Optimization of Dry Turning of Inconel 601 Alloy Based on Surface Roughness, Tool Wear, and Material Removal Rate, Article Number: 1068, Metals, 2023, Vol. 13, No. 6, ISSN 2075-4701 Tubić (rođ. Aleksić) A., Vujić rođ. Lončarski M., Gvoić V., Agbaba J., Vasiljević S., Cvetićanin L., Vukelić Đ., Prica M.: Sorption potential of microplastics for azo- and phthalocyanine printing dyes, Article Number: 110884, Dyes and Pigments, 2023, Vol. 209, ISSN 0143-7208 Pinćjer I., Miketić N., Gvoić V., Maričić K., Vukelić Đ., Prica M.: Optimization of tensile strength in the paper material cutting process based on CO2 laser process parameters, Article Number: 2719, Materials, 2023, Vol. 16, No. 7, ISSN 1996-1944 Berladir K., Hovorun T., Ivanov V., Vukelić Đ., Pavlenko I.: Diffusion Nitride Coatings for Heat-Resistant Steels, Article Number: 6877, Materials, 2023, Vol. 16, No. 21, ISSN 1996-1944 Kostić S., Kočović V., Petrović Savić S., Miljanić D., Miljojković J., Đorđević M., Vukelić Đ.: The Influence of Friction and Twisting Angle on the Tensile Strength of Polypropylene Baling Twine, Article Number: 3046, Applied Sciences, 2024, Vol. 14, No. 7, ISSN 2076-3417 Ilić Mićunović M., Budak I., Vukelić Đ., Đurović Koprivica D., Kuzmanović M., Agarski B., Puškar T.: Investigation of the geometric characteristics of inhalable particles emitted from the process of grinding dental restorations, Article Number: 5169, Applied Sciences, 2024, Vol. 14, No. 12, ISSN 2076-3417	28	224.00
M21a	Rad u međunarodnom časopisu izuzetnih vrednosti Rad u međunarodnom časopisu izuzetnih vrednosti Todorović P., Vukelić Đ., Tadić B., Veljković D., Budak I., Mačužić I., Lalić B.: Modelling of dynamic compliance of fixture/workpiece interface, International Journal of Simulation Modelling, 2014, Vol. 13, No. 1, pp. 54-65, ISSN 1726-4529 Mrkajić V., Vukelić Đ., Mihajlov A.: Reduction of CO2 emission and non-environmental co-benefits of bicycle infrastructure provision: the case of the University of Novi Sad, Serbia, Renewable and Sustainable Energy Reviews, 2015, Vol. 49, No. 9, pp. 232-242, ISSN 1364-0321 Mrkajić V., Mihajlov A., Vukelić Đ., Mihajlov A.: Reduction of CO2 emission and non-environmental co-benefits of bicycle infrastructure provision: the case of the University of Novi Sad, Serbia, Renewable and Sustainable Energy Reviews, 2015, Vol. 49, No. 9, pp. 232-242, ISSN 1364-0321 Tadić B., Todorović P., Novkinić B., Buchmeister B., Radenković M., Budak I., Vukelić Đ.: Fixture layout design based on a single-surface clamping with local deformation, International Journal of Simulation Modelling, 2015, Vol. 14, No. 3, pp. 379-391, ISSN 1726-4529 Agarski B., Budak I., Vukelić Đ., Hodolič J.: Fuzzy multi-criteria-based impact category weighting in life cycle assessment, Journal of Cleaner Production, 2016, Vol. 112, pp. 3256-3266, ISSN 0959-6526 Milanović B., Agarski B., Vukelić Đ., Budak I., Kiš (Kiss) F.: Comparative exergy-based life cycle assessment of conventional and hybrid base transmitter stations, Journal of Cleaner Production, 2017, Vol. 167, pp. 610-618, ISSN 0959-6526 Vukelić Đ., Bošković N., Agarski B., Radonić (Jakšić) J., Budak I., Pap S., Turk Sekulić M.: Eco-design of a low-cost adsorbent produced from waste cherry kernels, Journal of Cleaner Production, 2018, Vol. 174, pp. 1620-1628, ISSN 0959-6526 Vukelić Đ., Šimunović K., Šimunović G., Šarić T., Kanović Ž., Budak I., Agarski B.: Evaluation of an environment-friendly turning process of Inconel 601 in dry conditions, Journal of Cleaner Production, 2020, Vol. 266, ISSN 0959-6526 Agarski B., Budak I., Ilić Mićunović M., Vukelić Đ.: Life cycle assessment of injection moulding tools and multicomponent plastic cap production, Article Number: 137450, Journal of Cleaner Production, 2023, Vol. 413, ISSN 0959-6526 Milošević A., Šimunović G., Kanović Ž., Šimunović K., Santoši Ž., Šokac M., Vukelić Đ.: Comprehensive evaluation of dimensional deviation, flank wear, surface roughness and material removal rate in dry turning of C45 steel, Facta universitatis - series: Mechanical Engineering, 2024, ISSN 0354–2025 Cvetković D., Vukelić Đ., Doroslovački K.: A New Subclass of H-Matrices with Applications, Article Number 2322, Mathematics, 2024, Vol. 12, No. 15, ISSN 2227-7390	11	110.00
M22	Rad u istaknutom međunarodnom časopisu Rad u istaknutom međunarodnom časopisu Vukelić Đ., Zuperl U., Hodolič J.: Complex system for fixture selection, modification, and design, International Journal of Advanced Manufacturing Technology, 2009, Vol. 45, No. 7-8, pp. 731-748, ISSN 0268-3768 Mrkajić V., Stamenković M., Maleš M., Vukelić Đ., Hodolič J.: Proposal for reducing problems of the air pollution and noise in the urban environment, Carpathian Journal of Earth and Environmental Sciences, 2010, Vol. 5, No. 1, pp. 49-56, ISSN 1842-4090 Lazarević M., Ostojić G., Ćosić I., Stankovski S., Vukelić Đ., Zečević I.: Product lifecycle management (PLM) methodology for product tracking based on radio-frequency identification (RFID) technology, Scientific Research and Essays, 2011, Vol. 6, No. 22, pp. 4776-4787, ISSN 1992-2248 Ostojić G., Tadić B., Lužanin O., Stankovski S., Vukelić Đ., Budak I., Miladinović Lj.: An integral system for automated cutting tool selection, Scientific Research and Essays, 2011, Vol. 6, No. 15, pp. 3240-3251, ISSN 1992-2248 Vukelić Đ., Tadić B., Miljanić D., Budak I., Todorović P., Ranđelović S., Jeremić B.: Novel workpiece clamping method for increased machining performance, Tehnički vjesnik - Technical Gazette, 2012, Vol. 19, No. 4, pp. 837-846, ISSN 1330-3651 Agarski B., Kljajin M., Budak I., Tadić B., Vukelić Đ., Bosak M., Hodolič J.: Application of multi-criteria assessment in evaluation of motor vehicles’ environmental performances, Tehnički vjesnik - Technical Gazette, 2012, Vol. 19, No. 2, pp. 221-226, ISSN 1330-3651 Trifković B., Budak I., Todorović A., Hodolič J., Puškar T., Jevremović D., Vukelić Đ.: Application of Replica Technique and SEM in Accuracy Measurement of Ceramic Crowns, Measurement Science Review, 2012, Vol. 12, No. 3, pp. 90-97, ISSN 1335-8871 Jevremović D., Puškar T., Kosec B., Vukelić Đ., Budak I., Aleksandrović S., Eggbeer D., Williams R.: The analysis of the mechanical properties of F75 Co-Cr alloy for use in selective laser melting (SLM) manufacturing of removable partial dentures (RPD), Metalurgija, 2012, Vol. 51, No. 2, pp. 171-174, ISSN 0543-5846 Matin I., Hadžistević M., Hodolič J., Vukelić Đ., Lukić D.: A CAD/CAE Integrated Injection Mold Design System for Plastic Products, International Journal of Advanced Manufacturing Technology, 2012, Vol. 63, No. 5-8, pp. 595-607, ISSN 0268-3768 Budak I., Trifkovic B., Puškar T., Vukelić Đ., Vučaj-Ćirilović V., Hodolič J., Todorović A.: Comparative analysis of 3D digitization systems in the field of dental prosthetics, Tehnički vjesnik - Technical Gazette, 2013, Vol. 20, No. 2, pp. 291-296, ISSN 1330-3651 Vještica S., Budak I., Kljajin M., Vukelić Đ., Milanović B., Milanković D., Hodolič J.: Model for analysis of environmental impacts of production processes in flooring industry based on LCA, Tehnički vjesnik - Technical Gazette, 2014, Vol. 21, No. 3, pp. 457-466, ISSN 1330-3651 Hadžistević M., Matin I., Hodolič J., Vukelić Đ., Vukmirović S., Godec D., Nedić B.: Rule base reasoning in the knowledge-based mould design system, Tehnički vjesnik - Technical Gazette, 2014, Vol. 21, No. 5, pp. 1143-1148, ISSN 1330-3651 Todorović P., Buchmeister B., Đapan M., Vukelić Đ., Milošević M., Tadić B., Radenković M.: Comparative model analysis of two types of clamping elements in dynamic conditions, Tehnički vjesnik - Technical Gazette, 2014, Vol. 21, No. 6, pp. 1273-1279, ISSN 1330-3651 Puškar T., Jevremović A., Aranđelović S., Radulović S., Budak I., Vukelić Đ., Jevremović D.: Comparative study of cytotoxicity of direct metal laser sintered and cast Co-Cr-Mo dental alloy, Metalurgija, 2015, Vol. 54, No. 3, pp. 481-484, ISSN 0543-5846 Matin I., Hadžistević M., Vukelić Đ., Trifković B., Potran M., Brajlih T., Drstvenšek I.: Advanced procedure for fabrication of substructure in dentistry, Metalurgija, 2016, Vol. 55, No. 4, pp. 761-764, ISSN 0543-5846 Vukelić Đ., Budak I., Tadić B., Šimunović G., Kljajić V., Agarski B.: Multi-Criteria Decision-Making and Life Cycle Assessment Model for Optimal Product Selection: Case Study of Knee Support, International Journal of Environmental Science and Technology, 2017, Vol. 14, No. 2, pp. 353-364, ISSN 1735-1472 Vukelić Đ., Tadić B., Džunić D., Kočović V., Brzaković Lj., Živković M., Šimunović G.: Analysis of ball-burnishing impact on barrier properties of wood workpieces, International Journal of Advanced Manufacturing Technology, 2017, Vol. 92, No. 1, pp. 129-138, ISSN 0268-3768 Matejić M., Tadić B., Lazarević M., Mišić M., Vukelić Đ.: Modelling and Simulation of a Novel Modular Fixture for Flexible Manufacturing System, International Journal of Simulation Modelling, 2018, Vol. 17, No. 1, pp. 18-29, ISSN 1726-4529 Vukelić Đ., Agarski B., Budak I., Šimunović G., Buchmeister B., Jakovljević Ž., Tadić B.: Eco-design of fixtures based on life cycle and cost assessment, International Journal of Simulation Modelling, 2019, Vol. 18, No. 1, pp. 72-85, ISSN 1726-4529 Vukelić Đ., Tadić B., Bogdanović B., Todorović P.: Using pre-processing and indenting of contact interface to improve fixture clamping efficiency, International Journal of Advanced Manufacturing Technology, 2019, Vol. 104, No. 1-4, pp. 179-194, ISSN 0268-3768 Agarski B., Hadžistević M., Budak I., Morača S., Vukelić Đ.: Comparison of approaches to weighting of multiple criteria for selecting equipment to optimise performance and safety, International Journal of Occupational Safety and Ergonomics, 2019, Vol. 25, No. 2, pp. 228-240, ISSN 1080-3548 Santoši Ž., Budak I., Šokac M., Hadžistević M., Vukelić Đ.: Influence of high dynamic range images on the accuracy of the photogrammetric 3D digitization: A case study, Advances in Production Engineering and Management, 2019, Vol. 14, No. 3, pp. 391-399, ISSN 1854-6250 Vukelić Đ., Kanović Ž., Šokac M., Santoši Ž., Budak I., Tadić B.: Modelling of micro-turning process based on constant cutting force, International Journal of Simulation Modelling, 2021, Vol. 20, No. 1, pp. 146-157, ISSN 1726-4529 Kocovic V., Dzunic D., Kostic S., Brzakovic Lj., Tadic B., Prica M., Vukelić Đ.: Investigation into the Effects of Roller Pressing on Hardness, Roughness and Elastic Modulus of Wooden Workpieces, Applied Sciences, 2022, Vol. 12, No. 11, ISSN 2076-3417 Vukelić Đ., Prica M., Ivanov V., Jovičić G., Budak I., Lužanin O.: Optimization of surface roughness based on turning parameters and insert geometry, International Journal of Simulation Modelling, 2022, Vol. 21, No. 3, pp. 417-428, ISSN 1726-4529 Vukelić Đ., Šimunović K., Kanović Ž., Šarić T., Doroslovački K., Prica M., Šimunović G.: Modeling surface roughness in finish turning as a function of cutting tool geometry using the response surface method, Gaussian process regression and decision tree regression, Advances in Production Engineering and Management, 2022, Vol. 17, No. 3, pp. 367-380, ISSN 1854-6250 Kočović V., Vukelić Đ., Kostić S., Bijelić I., Prica M., Tadić B.: Micro-cutting of holes by centrifugal force, International Journal of Advanced Manufacturing Technology, 2023, Vol. 124, pp. 1437-1455, ISSN 0268-3768 Bijelic I., Milovanovic V., Vukelić Đ., Simunovic G., Prica M., Šokac M., Tadic B.: Application of Natrium Silicate as a Phase Change Material in Fixture Design, Tehnički vjesnik - Technical Gazette, 2023, Vol. 30, No. 2, pp. 465-473, ISSN 1330-3651 Miljanić D., Milovanović V., Vukelić Đ., Rakić D., Tadić B.: On the Determination of the Friction-Caused Energy Losses and its Potential for Monitoring Industrial Tribomechanical Systems, International Journal of Advanced Manufacturing Technology, 2023, ISSN 0268-3768 Ćojbašić (Radović) S., Turk Sekulić M., Agarski B., Pap S., Vukelić Đ., Budak I., Prodanović J.: Life cycle assessment of new bio-based coagulant production for sustainable wastewater treatment, International Journal of Environmental Science and Technology, 2023, Vol. 20, pp. 7433-7462, ISSN 1735-1472 Vukelić Đ., Šimunović K., Ivanov V., Šokac M., Kočović V., Santoši Ž., Šimunović G.: Modelling of flank and crater wear during dry turning of AISI 316L stainless steel as a function of tool geometry using the response surface design, Tehnički vjesnik - Technical Gazette, 2024, Vol. 31, No. 4, pp. 1376-1384, ISSN 1330-3651 Gvoić V., Prica M., Turk Sekulić M., Pap S., Paunović O., Kulić Mandić A., Bečelić-Tomin M., Vukelić Đ., Kerkez Đ.: Synergistic effect of Fenton oxidation and adsorption process in treatment of azo printing dye: DSD optimization and reaction mechanism interpretation, Environmental Technology, 2024, Vol. 45, No. 9, pp. 1781-1800, ISSN 0959-3330	32	160.00
M23	Rad u međunarodnom časopisu Rad u međunarodnom časopisu Hodolič J., Matin I., Hadžistević M., Vukelić Đ.: Development of Integrated CAD/CAE System of Mold Design for Plastic Injection Molding, Materiale Plastice, 2009, Vol. 46, No. 3, pp. 236-242, ISSN 0025-5289 Vukelić Đ., Tadić B., Lužanin O., Budak I., Križan P., Hodolič J.: A rule-based system for fixture design, Scientific Research and Essays, 2011, Vol. 6, No. 27, pp. 5787-5802, ISSN 1992-2248 Ostojić G., Stankovski S., Vukelić Đ., Lazarević M., Hodolič J., Tadić B., Odri S.: Implementation of automatic identification technology in a process of fixture assembly/disassembly, Strojniski vestnik - Journal of Mechanical Engineering, 2011, Vol. 57, No. 11, pp. 819-825, ISSN 0039-2480 Tadić B., Vukelić Đ., Hodolič J., Mitrović S., Erić M.: Conservative-Force-Controlled Feed Drive System for Down Milling, Strojniski vestnik - Journal of Mechanical Engineering, 2011, Vol. 57, No. 5, pp. 425-439, ISSN 0039-2480 Vukelić Đ., Ostojić G., Stankovski S., Lazarević M., Tadić B., Hodolič J., Simeunović N.: Machining fixture assembly/disassembly in RFID environment, Assembly Automation, 2011, Vol. 31, No. 1, pp. 62-68, ISSN 0144-5154 Muransky J., Hodolič J., Vukelić Đ.: System for environmental analysis of products, Journal of Environmental Protection and Ecology, 2012, Vol. 13, No. 3A, pp. 2040-2048, ISSN 1311-5065 Jevremović D., Puškar T., Budak I., Vukelić Đ., Kojić V., Eggbeer D., Williams R.: An RE/RM approach to the design and manufacture of removable partial dentures with a biocompatibility analysis of the F75 Co-Cr SLM alloy, Materiali in Tehnologije, 2012, Vol. 46, No. 2, pp. 123-129, ISSN 1580-2949 Vukelić Đ., Miljanić D., Ranđelović S., Budak I., Džunić D., Erić M., Pantić M.: Burnishing process based on optimal depth of workpiece penetration, Materiali in Tehnologije, 2013, Vol. 47, No. 1, pp. 43-51, ISSN 1580-2949 Jeremić B., Vukelić Đ., Todorović P., Macuzic I., Pantic M., Dzunic D., Tadic B.: Static Friction at High Contact Temperatures and Low Contact Pressure, Journal of Friction and Wear, 2013, Vol. 34, No. 2, pp. 114-119, ISSN 1068-3666 Todorović P., Blagojević M., Vukelić Đ., Mačužić I., Jeremić M., Simić A., Jeremić B.: Static coefficient of rolling friction under heating, Journal of Friction and Wear, 2013, Vol. 34, No. 6, pp. 591-595, ISSN 1068-3666 Tadić B., Bogdanović B., Jeremić B., Todorović P., Lužanin O., Budak I., Vukelić Đ.: Locating and clamping of complex geometry workpieces with skewed holes in multiple-constraint conditions, Assembly Automation, 2013, Vol. 33, No. 4, pp. 386-400, ISSN 0144-5154 Vukelić Đ., Šimunović G., Tadić B., Buchmeister B., Šarić T., Simeunović N.: Intelligent design and optimization of machining fixtures, Tehnički vjesnik - Technical Gazette, 2016, Vol. 23, No. 5, pp. 1325-1334, ISSN 1330-3651 Havrlisan S., Simunovic K., Vukelić Đ.: Modelling of abrasive wear of Ni-based self-fluxing alloy coatings by the application of experimental design, Tehnički vjesnik - Technical Gazette, 2016, Vol. 23, No. 6, pp. 1687-1693, ISSN 1330-3651 Šimunović G., Svalina I., Šimunović K., Šarić T., Havrlišan S., Vukelić Đ.: Surface roughness assessing based on digital image features, Advances in Production Engineering and Management, 2016, Vol. 11, No. 2, pp. 93-104, ISSN 1854-6250 Lazarević M., Vukelić Đ., Stankovski S., Sremčev N., Ostojić G.: Enhancing Student Competence through Novel Student Enterprise Concept, International Journal of Engineering Education, 2017, Vol. 33, No. 6(A), pp. 1824-1833, ISSN 0949-149X Babić M., Kočović V., Vukelić Đ., Mihajlovic G., Erić M., Tadić B.: Investigation of ball burnishing processing on mechanical characteristics of wooden elements, Proceedings of the Institution of Mechanical Engineers. Part C: Journal of Mechanical Engineering Science, 2017, Vol. 231, No. 1, pp. 120-127, ISSN 0954-4062 Trifković B., Budak I., Vukelić Đ., Puškar T., Jevremović D., Todorović A., Todorović A., Poštić S.: Analysis of accuracy and precision of optical 3D digitisation devices in dental computer-aided-design and computer-aided- manufacturing systems, Maejo International Journal of Science and Technology, 2017, Vol. 11, No. 1, pp. 45-57, ISSN 1905-7873 Tadić B., Matejić M., Šimunović G., Kljajin M., Kočović V., Bogdanović B., Vukelić Đ.: Increasing Stiffness of Constructions through Application of Enhancing Elements, Tehnički vjesnik - Technical Gazette, 2018, Vol. 25, No. 2, pp. 479-485, ISSN 1330-3651 Šarić T., Šimunović G., Vukelić Đ., Šimunović K., Lujić R.: Estimation of CNC Grinding Process Parameters Using Different Neural Networks, Tehnički vjesnik - Technical Gazette, 2018, Vol. 25, No. 6, pp. 1770-1775, ISSN 1330-3651 Tadić B., Živković M., Šimunović G., Kočović V., Šarić T., Vukelić Đ.: The Influence of Vacuum Level on the Friction Force Acting on the Pneumatic Cylinder Sealing Ring, Tehnički vjesnik - Technical Gazette, 2019, Vol. 26, No. 4, pp. 970-976, ISSN 1330-3651 Lazarević M., Mandić J., Sremčev N., Vukelić Đ., Debevec M.: A systematic literature review of Poka-Yoke and novel approach to theoretical aspects, Strojniski vestnik - Journal of Mechanical Engineering, 2019, Vol. 65, No. 7-8, pp. 454-467, ISSN 0039-2480 Šokac M., Vukelić Đ., Jakovljević Ž., Santoši Ž., Hadžistević M., Budak I.: Fuzzy Hybrid Method for Reconstruction of 3D Models Based on CT/MRI Data, Strojniski vestnik - Journal of Mechanical Engineering, 2019, Vol. 65, No. 9, pp. 482-494, ISSN 0039-2480 Agarski B., Šokac M., Santoši Ž., Vukelić Đ., Budak I.: Multi-Criteria Evaluation of Design Complexity for Patient-Specific Bone Graft, Tehnički vjesnik - Technical Gazette, 2020, Vol. 27, No. 3, pp. 803-811, ISSN 1330-3651 Šarić T., Vukelić Đ., Šimunović K., Svalina I., Tadić B., Prica M., Šimunović G.: Modelling and Prediction of Surface Roughness in CNC Turning Process using Neural Networks, Tehnički vjesnik - Technical Gazette, 2020, Vol. 27, No. 6, pp. 1923-1930, ISSN 1330-3651 Vukelić Đ., Todorović P., Šimunović K., Miljojković J., Šimunović G., Budak I., Tadić B.: A Novel Method for Determination of Kinetic Friction Coefficient using Inclined Plane, Tehnički vjesnik - Technical Gazette, 2021, Vol. 28, No. 2, pp. 447-455, ISSN 1330-3651 Santoši Ž., Budak I., Šokac M., Kuzmanović M., Vukelić Đ.: An innovative photogrammetric system for 3D digitization of dental models, Tehnički vjesnik - Technical Gazette, 2022, Vol. 29, No. 5, pp. 1560-1566, ISSN 1330-3651 Brzaković Lj., Milovanović V., Kočović V., Šimunović G., Vukelić Đ., Tadić B.: Relation between kinetic friction coefficient and angular acceleration during motion initiated by dynamic impact force, Tehnički vjesnik - Technical Gazette, 2022, Vol. 29, No. 5, pp. 1622-1628, ISSN 1330-3651	27	81.00
M24	Rad u časopisu međunarodnog značaja verifikovanog posebnom odlukom Rad u časopisu međunarodnog značaja verifikovanog posebnom odlukom Kočović V., Mitrović S., Mihajlović G., Mijatović M., Bogdanović B., Vukelić Đ., Tadić B.: Applications of Friction Stir Processing during Engraving of Soft Materials, Tribology in Industry, 2015, Vol. 37, No. 4, pp. 434-439, ISSN 0354-8996 Tadić B., Kočović V., Matejić M., Brzaković Lj., Mijatović M., Vukelić Đ.: Static Coefficient of Rolling Friction at High Contact Temperatures and Various Contact Pressure, Tribology in Industry, 2016, Vol. 38, No. 1, pp. 83-89, ISSN 0354-8996 Santoši Ž., Budak I., Šokac M., Puškar T., Vukelić Đ., Trifković B.: 3D digitization of featureless dental models using close range photogrammetry aided by noise based patterns, Facta universitatis - series: Mechanical Engineering, 2018, Vol. 16, No. 3, pp. 297-305, ISSN 0354–2025 Klašnja N., Sremčev N., Vukelić Đ., Simeunović N., Lazarević M.: Optimization of Cable Harness Assembly Systems Based on Lean Concept Application, International Journal of Industrial Engineering and Management, 2019, Vol. 10, No. 1, pp. 115-123, ISSN 2217-2661	4	12.00
M26	Naučna kritika i polemika u međunarodnom časopisu Naučna kritika i polemika u međunarodnom časopisu Vukelić Đ.: About Impact Factor, Tehnički vjesnik - Technical Gazette, 2014, Vol. 21, No. 1, pp. 3-4, ISSN 1330-3651	1	1.00
M28	Uređivanje međunarodnog naučnog časopisa Uređivanje međunarodnog naučnog časopisa Vukelić Đ.: International Editorial Council, Tehnički vjesnik - Technical Gazette, 2013, Vol. 20, ISSN 1330-3651 Vukelić Đ.: International Editorial Council, Tehnički vjesnik - Technical Gazette, 2014, Vol. 21, ISSN 1330-3651 Vukelić Đ.: International Editorial Council, Tehnički vjesnik - Technical Gazette, 2015, Vol. 22, ISSN 1330-3651 Vukelić Đ.: International Editorial Council, Tehnički vjesnik - Technical Gazette, 2016, Vol. 23, ISSN 1330-3651 Vukelić Đ.: International Editorial Council, Tehnički vjesnik - Technical Gazette, 2017, Vol. 24, ISSN 1330-3651 Vukelić Đ.: International Editorial Council, Tehnički vjesnik - Technical Gazette, 2018, Vol. 25, ISSN 1330-3651 Vukelić Đ.: International Editorial Council, Tehnički vjesnik - Technical Gazette, 2019, Vol. 26, ISSN 1330-3651 Vukelić Đ.: Editorial Board, Tehnički vjesnik - Technical Gazette, 2020, Vol. 27, ISSN 1330-3651 Vukelić Đ.: Editorial Board, Tehnički vjesnik - Technical Gazette, 2021, Vol. 28, ISSN 1330-3651 Vukelić Đ.: Editorial Board, Tehnički vjesnik - Technical Gazette, 2022, Vol. 29, ISSN 1330-3651 Vukelić Đ.: Editorial Board, Tehnički vjesnik - Technical Gazette, 2023, Vol. 30, ISSN 1330-3651 Vukelić Đ.: Editorial Board, Tehnički Glasnik - Technical Journal, 2023, Vol. 17, ISSN 1848-5588 Vukelić Đ.: Editorial Board, Tehnički vjesnik - Technical Gazette, 2024, Vol. 31, ISSN 1330-3651 Vukelić Đ.: Editorial Board, Tehnički Glasnik - Technical Journal, 2024, Vol. 18, ISSN 1848-5588	14	28.00
M31	Predavanje po pozivu sa međunarodnog skupa štampano u celini Predavanje po pozivu sa međunarodnog skupa štampano u celini Vukelić Đ., Tadić B., Hodolič J., Matin I., Križan P.: Development a database of modular fixtures, 10. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 9-10 October, 2009, pp. 117-120, ISBN 978-86-7892-223-7 Hodolič J., Budak I., Vukelić Đ., Agarski B., Hadžistević M.: Less Formal Tools for Environmental Management in Production Industry, 2. International Symposium on Environmental and Material Flow Management - EMFM, Zenica: Faculty of Mechanical Engineering, 7-9 June, 2012, pp. 1-15, ISBN 978-9958-617-46-1 Matin I., Hodolič J., Hadžistević M., Vukelić Đ., Nedić B., Godec D.: A review of research, issues and approaches for mold design software development, 35. International Conference of Production Engeneering - ICPE, Kopaonik: Faculty of Mechanical and Civil Engineering, 25-28 September, 2013, pp. 35-40, ISBN 978-86-82631-69-9 Agarski B., Budak I., Vukelić Đ., Kuric I., Hodolič J.: Weighting of impact categories and sensitivity analysis in life cycle assessment, 15. International Conference: Automation in Production Planning and Manufacturing, Žilina: Faculty of Mechanical Engineering, 19-21 May, 2014, pp. 9-14, ISBN 978-80-5540-878-1 Agarski B., Vukelić Đ., Kiš (Kiss) F., Ilić Mićunović M., Kosec B., Kosec B., Budak I.: Comparison of Life Cycle Assessment Tools: Simapro and OpenLCA, 6. International Symposium on Environmental and Material Flow Management - EMFM, Bor: University of Belgrade, Technical Faculty in Bor, 2-4 October, 2016, pp. 72-79, ISBN 978-86-6305-050-1 Agarski B., Jovanović S., Ilić Mićunović M., Vukelić Đ.: Overview of Life Cycle Assessment and Eco-Design publications trend in Republic of Serbia, 3. International Scientific Conference "Challenges of Modern Economy and Society through the Prism of Green Economy and Sustainable Development" – CESGED, Novi Sad: Faculty of Economics and Engineering Management - FIMEK, Novi Sad, Serbia; Educational and Business Center for Development of Human Resources, Management, and Sustainable Development, Novi Sad, Serbia , 25-28 April, 2024, pp. 31-37, ISBN 978-86-82408-23-9	6	18.00
M33	Saopštenje sa međunarodnog skupa štampano u celini Saopštenje sa međunarodnog skupa štampano u celini Todić V., Milojević Z., Vukelić Đ., Milošević M., Cukrov V.: Automation of tool selection and processing regimes by application of modern programme systems, 8. International Science and Engineering Conference "Machine-Building and Technosphere of the XXI Century", Donetsk: National Technical University, 10-16 September, 2001, pp. 247-252, ISBN 966-7907-01-5 Vukelić Đ., Hodolič J.: Development a system for automated design of modular fixtures, 15. DAAAM International Symposium, Beč: Vienna University of Technology, 3-6 November, 2004, pp. 489-490, ISBN 3-901509-42-9 Šebo D., Hodolič J., Vukelić Đ., Bednar J., Tizova M.: Technically-economical comparison of parameters for waste water instalation , 2. PSU-UNS International Conference on Engineering and Environment - ICEE, Novi Sad: Faculty of Technical Sciences, 19-21 May, 2005, pp. 1-5 Vukelić Đ., Hodolič J.: System for automated modular fixtures design, 16. DAAAM International Symposium, Opatija: Vienna University of Technology, 19-22 October, 2005, pp. 381-382, ISBN 3-901509-46-1 Vukelić Đ., Hodolič J.: Database of modular fixtures, 8. International Symposium "Young People and Multidisciplinary Research", Temišvar: University of Timisoara, 11-12 May, 2006, pp. 310-318, ISBN 973-8359-39-2 Hodolič J., Matin I., Vukelić Đ., Antić A.: Using compex surfaces for Core and Cavity design of mold, 8. International Scientific Conference New Ways in Manufacturing Technologies, Prešov: Faculty of Manufacturing Technologies, 22-23 June, 2006, pp. 299-302, ISBN 80-8073-554-09 Hodolič J., Vukelić Đ., Agarski B.: Biomass briquetting and enviromental protection in the region of province of Vojvodina, 13. International Conference "Engineering and Environment Protection", Bratislava: Faculty of Mechanical Engineering, 26-28 June, 2007, pp. 111-116, ISBN 978-80-227-2693-1 Vukelić Đ., Hodolič J., Bešić I., Zeljković M.: Automation of the modeling process for the group of products with the Pro/ENGINEER software system, 11. International Scientific Conference "Mechanical Engineering", Bratislava: Faculty of Mechanical Engineering, 29-30 November, 2007, pp. 1-8, ISBN 978-80-227-2768-6 Vukelić Đ., Hodolič J.: Computer aided fixtures design, 1. Machine Design, Novi Sad: Faculty of Technical Sciences, 18 May, 2007, pp. 21-26, ISBN 978-86-7892-038-7 Križan P., Vukelić Đ.: Shape of pressing chamber for wood biomass compacting, 2. International Quality Conference, Kragujevac: Faculty for Mechanical Engineering, 13-15 May, 2008, pp. 1-4, ISBN 978-86-86663-26-9 Vukelić Đ., Križan P., Onderova I.: Development a system for automated design of form tools, 2. International Conference ERIN (Education/Research/Innovation), Bratislava: Faculty of Mechanical Engineering, 23-24 April, 2008, pp. 1-8, ISBN 978-80-227-2849-2 Muransky J., Hodolič J., Vukelić Đ.: EcoCAD - A system for environmental and economic analysis of engineering products, 14. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Faculty of Technical Sciences, 2-3 October, 2008, pp. 49-54, ISBN 978-86-7892-135-3 Vukelić Đ., Hodolič J., Križan P.: A model of integral system for fixture design, 12. International Scientific Conference "Mechanical Engineering", Bratislava: Faculty of Mechanical Engineering, 13-14 November, 2008, pp. 1-12, ISBN 978-80-227-2987-1 Vukelić Đ., Vrečič T., Hodolič J., Simeunović N., Križan P.: A system for manufacturing process statistical quality control, 12. International Scientific Conference "Mechanical Engineering", Bratislava: Faculty of Mechanical Engineering, 13-14 November, 2008, pp. 1-14, ISBN 978-80-227-2987-1 Križan P., Matuš M., Vukelić Đ.: Optimilisation of pressing chamber construction of briquetting machine, 3. International Conference ERIN (Education/Research/Innovation), Bratislava: Faculty of Mechanical Engineering, 1-2 April, 2009, pp. 1-10, ISBN 978-80-248-1982-2 Vukelić Đ., Hodolič J.: Handling of fixtures and fixture elements in flexible technological structures, 9. Međunarodna konferencija o dostignućima elektrotehnike, mašinstva i informatike - DEMI, Banja Luka: Faculty of Mechanical Engineering, 28-29 May, 2009, pp. 261-266, ISBN 978-99938-39-23-1 Križan P., Soos L., Vukelić Đ.: Counter pressure effecting on compacted briquette in pressing chamber, 10. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 9-10 October, 2009, pp. 136-139, ISBN 978-86-7892-223-7 Križan P., Ljubomir Š., Miloš M., Iveta O., Vukelić Đ.: Difference between compacting of softwood and hardwood, 1. Scientific Proceedings 2009, Bratislava: Faculty of Mecanical Engineering, 20 December, 2009, pp. 161-167, ISBN 978-80-227-3326-7 Agarski B., Budak I., Hodolič J., Vukelić Đ.: Multicriteria Approach for Assessment of Environment Quality, 4. International Quality Conference, Kragujevac: Faculty of Mecanical Engineering, 21-19 May, 2010, pp. 351-359, ISBN 978-86-86663-49-8 Petelj A., Hodolič J., Vukelić Đ., Agarski B.: Plastic Packing Management and Recycling, 4. International Quality Conference, Kragujevac: Faculty of Mecanical Engineering, 21-19 May, 2010, pp. 361-369, ISBN 978-86-86663-49-8 Vukelić Đ., Tadić B., Hodolič J., Križan P.: Fixture layout unification, 13. International Scientific Conference "Mechanical Engineering", Bratislava: Faculty of Mecanical Engineering, 21 October, 2010, pp. 676-681, ISBN 978-80-227-3304-5 Tadić B., Jeremić B., Vukelić Đ., Mitrović S., Erić M.: Development of Tribometer and Measurement Results of Static Coefficient of Friction Sliding and Coefficient of Rolling Friction by Principle Steep Plane, 12. International Conference on Tribology - SERBIATRIB, Kragujevac: Faculty of Mechanical Engineering, 11-13 May, 2011, pp. 397-402, ISBN 978-86-86663-74-0 Križan P., Matuš M., Ondruška J., Vukelić Đ.: Briquettes stabilization time after briquetting process, 5. International Conference ERIN (Education/Research/Innovation), Tatranska Kotlina: Faculty of Mecanical Engineering, 13-16 April, 2011, pp. 127-134, ISBN 978-80-89347-05-6 Agarski B., Vukelić Đ., Budak I., Hodolič J., Puškar T.: The hierarchical structure in healthcare waste management, 5. International Quality Conference, Kragujevac: Faculty of Mechanical Engineering, 20 May, 2011, pp. 165-174, ISBN 978-86-86663-68-9 Puškar T., Ilić Mićunović M., Vukelić Đ., Budak I., Trifković B., Hodolič J.: Environmental and occupational health risks in dental laboratories, 5. International Quality Conference, Kragujevac: Faculty of Mechanical Engineering, 20 May, 2011, pp. 595-602, ISBN 978-86-86663-68-9 Vukelić Đ., Tadić B., Hodolič J., Budak I., Lazarević M.: Development an expert system for machining fixture design, 10. International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology - DEMI, Banja Luka: Faculty of Mechanical Engineering, 26-28 May, 2011, pp. 303-308, ISBN 978-99938-39-36-1 Budak I., Trifković B., Puškar T., Hadžistević M., Vukelić Đ., Hodolič J.: Application and accuracy of 3D-digitization systems in the field of dentistry, 6. International Working Conference "Total Quality Management - Advanced and Intelligent Approaches" - TQM & AIA, Beograd: Faculty of Mechanical Engineering, 6-10 June, 2011, pp. 409-414, ISBN 978-86-7083-727-0 Matin I., Hadžistević M., Hodolič J., Vukelić Đ.: An Interactive CAD/CAE System for Mold Design, 34. International Conference on Production Engineering, Niš: Faculty of Mechanical Engineering, 28-30 September, 2011, pp. 213-216, ISBN 978-86-6055-019-6 Hadžistević M., Hodolič J., Budak I., Vukelić Đ., Štrbac B.: Results of the analysis on stylus calibration of a coordinate measuring machine (CMM), 34. International Conference on Production Engineering, Niš: Faculty of Mechanical Engineering, 28-30 September, 2011, pp. 143-146, ISBN 978-86-6055-019-6 Budak I., Vještica S., Milanović B., Milanković D., Vukelić Đ., Hodolič J., Martinov M.: LCA of an Industrial Plant after the Implementation of Waste-to-Energy, 3. ISWA Beacon Conference, Novi Sad: Faculty of Technical Sciences, 30-2 November, 2011, pp. 136-144, ISBN 978-86-7892-361-6 Jevremnović D., Jevremović D., Trifković B., Jevremović A., Lapčević A., Puškar T., Budak I., Vukelić Đ., Budak I., Vukelić Đ., Hodolič J.: The Use of CAD/CAM Technology in Design and Manufacture of Thin Laminate Veneers, 11. International Scientific Conference New Ways in Manufacturing Technologies, Prešov: Faculty of Manufacturing Technologies, 21-23 June, 2012, pp. 156-161, ISBN 978-80-553-0908-8 Matin I., Marković D., Puškar T., Hadžistević M., Hodolič J., Vukelić Đ., Potran M.: Reconstruction of the Dental CAD Model, 11. International Scientific Conference "Advanced Production Technologies" - MMA, Novi Sad: Fakultet tehničkih nauka, 20-21 September, 2012, pp. 501-504, ISBN 978-86-7892-429-3 Puškar T., Jevremović D., Eggbeer D., Lapčević A., Trifković B., Vukelić Đ., Williams R.: Determination of corrosion characteristics of dental alloy by inductively coupled plasma mass spectrometry, 11. International Scientific Conference "Advanced Production Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 20-21 September, 2012, pp. 509-512, ISBN 978-86-7892-429-3 Budak I., Trifković B., Puškar T., Vukelić Đ., Vučaj-Ćirilović V., Hodolič J., Todorović A.: Comparative Analysis of 3D Digitization Systems in the Field of Dental Prosthetics, 4. International Scientific and Expert Conference TEAM, Slavonski Brod: Mechanical Engineering Faculty in Slavonski Brod, Josip Juraj Strossmayer University of Osijek and International TEAM Society, 17-19 October, 2012, pp. 73-76, ISBN 1847-9065 Jocanović M., Karanović V., Vukelić Đ., Knežević D., Kraišnik M.: Diagnostic Equipment for Examination Phisical and Chemical Characteristics of UTTO, Stoutractor Oils, 1. International Scientific Conference "Conference on Mechanical Engineering Technologies and Applications" - COMETa, Istočno Sarajevo: University of East Sarajevo, Faculty of Mechanical Engineering, 28-30 November, 2012, pp. 631-640, ISBN 978-99938-655-5-1, UDK: 621.03(082) Puškar T., Matin I., Hadžistević M., Hodolič J., Vukelić Đ., Marković D., Potran M.: Recognition and reconstruction of the dental CAD model, 11. International Scientific Conference "Advanced Production Technologies" - MMA, Novi Sad: Fakultet tehničkih nauka Novi Sad, 20-21 September, 2012, pp. 501-505, ISBN 978-86-7892-429-3 Agarski B., Milanović B., Milanković D., Ilić Mićunović M., Budak I., Vukelić Đ., Hodolič J.: Application of Analytic Hierarchy Process for Weighting of Impact Categories in Life Cycle Impact Assessment, 7. International Quality Conference, Kragujevac: Faculty of Engineering, 23-25 May, 2013, pp. 181-187, ISBN 978-86-86663-94-8 Matin I., Hadžistević M., Hodolič J., Vukelić Đ.: Practical aspects of integration in the developed mold design system, Acta Technica Corviniensis, 2013, pp. 501-506, ISSN 2067-3809, 11. International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology - DEMI, Banja Luka: Faculty of Mechanical Engineering, 30-1 May, 2013, pp. 501-506, ISBN 978-99938-39-46-0 Trifković B., Budak I., Todorović A., Puškar T., Vukelić Đ., Todorović A., Šćepanović M.: Quality assessment of intraoral optical digitization methods in dentistry, 7. International Working Conference "Total Quality Management - Advanced and Intelligent Approaches" - TQM & AIA, Beograd: Faculty of Mechanical Engineering, 4-7 June, 2013, pp. 189-194, ISBN 978-86-7083-790-4 Ilić Mićunović M., Budak I., Hodolič J., Vukelić Đ., Puškar T.: Indoor air pollution: particulate emission and health effects on dental technicians, 20. Conference Engineering of Environment Protection - TOP2014, Bratislava: Faculty of Mechanical Engineering, 10-12 June, 2014, pp. 179-184, ISBN 978-80-227-4174-3 Zuperl U., Cus F., Vukelić Đ.: Computer vision as a main part of tool condition control, 16. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Faculty of Technical Sciences, 15-17 October, 2014, pp. 73-76, ISBN 978-86-7892-652-5 Matin I., Hadžistević M., Hodolič J., Vukelić Đ., Medić V.: The quality management of the injection molding process, 8. International Working Conference "Total Quality Management - Advanced and Intelligent Approaches" - TQM & AIA, Beograd: Faculty of Mechanical Engineering, 1-5 June, 2015, pp. 376-371, ISBN 978-86-7083-859-8 Vicko K., Potran M., Štrbac B., Vukelić Đ.: Dimensional accuracy of monophasic impression technique- influence of setting time on accuracy of working casts, 9. International Quality Conference, Kragujevac: Faculty of Engineering, 4-6 June, 2015, pp. 307-310, ISBN 978-86-6335-015-1 Ilić Mićunović M., Budak I., Kosec B., Agarski B., Vukelić Đ., Hodolič J.: Particles characterization with static image analysis method, 5. International Symposium on Environmental and Material Flow Management - EMFM, Zenica: Faculty of Mechanical Engineering in Zenica, University of Zenica, 5-7 November, 2015, pp. 110-115, ISBN 978-9958-617-46-1 Lazarević M., Ćosić I., Vukelić Đ., Sremčev N., Bajčeta D.: Traceability of machining cutting tools and fixtures in the production system using the RFID technology, 26. DAAAM International Symposium, Zadar: DAAAM International, 21-24 October, 2015, pp. 415-422, ISBN 978-3-902734-05-1 Agarski B., Vukelić Đ., Ilić Mićunović M., Šimunović K., Budak I.: Optimal product selection based on product’s quality and environmental properties, 1. International Conference on Quality of Life, Kragujevac: Faculty of Engineering, 9-10 June, 2016, pp. 89-94, ISBN 978-86-6335-033-5 Santoši Ž., Budak I., Šokac M., Vukelić Đ.: Influence of surface quality on 3D digitization results obtained by close-range photogrammetry, 15. International Conference on Tribology - SERBIATRIB, Kragujevac: University of Kragujevac, Faculty of Engineering , 17-19 May, 2017, pp. 566-570, ISBN 978-86-6335-041-0 Agarski B., Budak I., Šimunović G., Kosec B., Hadžistević M., Vukelić Đ.: Development of innovative methodology for ecodesign of products and processes for the region of Vojvodina, 13. International Conference on Accomplishments in Mechanical and Industrial Engineering - DEMI, Banja Luka: Faculty of Mechanical Engineering, University of Banja Luka, 26-27 May, 2017, pp. 821-826, ISBN 978-99938-39-72-9 Šokac M., Santoši Ž., Budak I., Vukelić Đ., Puškar T.: Improvement and development of modern diagnostic method in dentistry using advanced 3D digitizing systems, 8. PSU-UNS International Conference on Engineering and Technology - ICET, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, 8-10 June, 2017, pp. 1-4, ISBN 978-86-7892-933-5 Agarski B., Vukelić Đ., Milošević M., Kosec B., Budak I.: Multi-criteria decision making and life cycle management model for optimal transport selection, 2. International Conference on Quality of Life, Kragujevac: Faculty of Engineering in Kragujevac, 8-10 June, 2017, pp. 139-144, ISBN 978 - 86 - 6335 - 04 Šokac M., Santoši Ž., Budak I., Car Z., Vukelić Đ.: Combination of contact and optical 3D digitizing methods for their application in reverse engineering, 8. International Conference on Innovative Technologies IN-TECH, Ljubljana: Faculty of Mechanical Engineering, 11-13 September, 2017, pp. 65-68, ISBN 0184-9069 Šokac M., Budak I., Santoši Ž., Kadvany K., Puškar T., Vukelić Đ.: Emergence of new technologies in the designing and fabrication of patient-specific removable partial dentures (RPDs): A case study, 8. International Conference on Information Society and Technology – ICIST, Kopaonik: Society for Information Systems and Computer Networks, 11-14 March, 2018, pp. 94-99, ISBN 978-86-8552-516-2 Ilić Mićunović M., Agarski B., Hadžistević M., Kosec B., Vukelić Đ.: Comparability of life cycle assessment results in type III environmental declarations , 13. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 28-29 September, 2018, pp. 323-326, ISBN 978-86-6022-094-5 Santoši Ž., Šokac M., Tadić B., Budak I., Šimunović G., Ilić Mićunović M., Vukelić Đ.: Evaluation of kinetic friction coefficient for wooden specimens, 13. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 28-29 September, 2018, pp. 153-156, ISBN 978-86-6022-094-5 Matin I., Vukelić Đ., Hadžistević M., Štrbac B., Santoši Ž., Lukić D.: An integrated design approach for plastic part development, 13. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 28-29 September, 2018, pp. 145-148, ISBN 978-86-6022-094-5 Šokac M., Miljanović D., Santoši Ž., Vukelić Đ., Budak I.: Application of 3D Technologies for Design and Fabrication of Mandibular Implant: A Case Study, 8. Young Biomedical Engineers and Researchers Conference - YBERC, Košice: Faculty of Mechanical Engineering, 3-5 October, 2018, pp. 185-189, ISBN 978-80-8086-271-8 Agarski B., Vukelić Đ., Hadžistević M., Ilić Mićunović M., Budak I.: Attributional Versus Consequentional Life Cycle Assessment Modelling in Metalworking Production System, 8. International Scientific Conference on Environmental and Material Flow Management - EMFM, Zenica: Faculty of Mechanical Engineering in Zenica, University of Zenica, 14-16 November, 2018, pp. 50-55, ISBN 978-9958-617-46-1 Vukelić Đ., Santoši Ž., Šokac M., Budak I., Šarić T., Šimunović G., Tadić B.: Evaluation of the kinetic friction coefficient by using „disc-block“ friction pair of different wooden samples, 16. International Conference on Tribology - SERBIATRIB, Kragujevac: Faculty of Engineering, 15-17 May, 2019, pp. 287-292, ISBN 2620-2832 Santoši Ž., Šokac M., Vukelić Đ., Budak I.: 3D Reconstruction of Patient-Specific Dental Bone Grafts by Application of Reverse Engineering Modeling, 9. International Conference on Information Science and Technology (ICIST), Kopaonik: Society for Information Systems and Computer Networks, 10-13 March, 2019, pp. 192-195 Šokac M., Santoši Ž., Vukelić Đ., Katić M., Durakbasa N., Budak I.: Enhancement of Images from Industrial X-Ray Computed Tomography Systems by Hybrid Approach, 19. International Symposium for Production Research - ISPR, Beč, 28-30 August, 2019, pp. 138-146, ISBN 978-3-030-31342-5 Matin I., Vukelić Đ., Štrbac B., Šokac M., Hadžistević M.: Determination of injection molding parameters for production of plastic cover , 9. International Conference Industrial Engineering and Environmental Protection - IIZS, Zrenjanin, 3-4 October, 2019, pp. 71-78, ISBN 978-86-7672-324-9 Šokac M., Santoši Ž., Vukelić Đ., Katić M., Durakbasa N., Budak I.: Geometric Tolerancing Analysis of Multi-material Components (MMCs) Obtained by Industrial X-Ray Computed Tomography, 20. International Symposium for Production Research - ISPR, Antalya: Springer, 24-27 September, 2020, pp. 607-613, ISBN 978-3-030-62783-6 Agarski B., Vukelić Đ., Ilić Mićunović M., Budak I.: Evaluation of Impacts on Worker from Fixture Production with Life Cycle Assessment, 18. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Springer, 7-9 October, 2020, pp. 503-509, ISBN 978-3-030-97947-8 Ilić Mićunović M., Novaković T., Agarski B., Čepić Z., Vukelić Đ., Budak I.: Eco-labels as a tool for circular economy and circular packaging, 14. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 23-25 September, 2021, pp. 193-196, ISBN 978-86-6022-364-9 Santoši Ž., Šokac M., Budak I., Vukelić Đ.: Investigation of different circular image acquisition methods in close-range photogrammetry - virtual approach, 14. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 23-25 September, 2021, pp. 87-90, ISBN 978-86-6022-364-9 Šokac M., Katić M., Santoši Ž., Vukelić Đ., Budak I., Durakbasa N.: Investigation of Influence by Different Segmentation Parameters on Surface Accuracy in Industrial X-ray Computed Tomography, 21. International Symposium for Production Research - ISPR, Antalya: Springer, 7-9 October, 2021, pp. 202-209, ISBN 978-3-030-90420-3 Ilić Mićunović M., Novaković M., Budak I., Vukelić Đ., Agarski B.: Analysis of Product’s Design Health Impact Using DALY Method, 1. International Scientific Conference Healthy Urban Environment - HURBE, Sarajevo: University of Sarajevo, Faculty of Architecture , 4-5 October, 2021, pp. 395-403, ISBN 978-9926-490-02-7 Matin I., Štrbac B., Ranisavljev M., Vukelić Đ., Hadžistević M.: MOLD CAVITY LAYOUT DESIGN, 11. International Conference Industrial Engineering and Environmental Protection - IIZS, Zrenjanin, 7-8 October, 2021, pp. 112-116, ISBN 978-86-7672-348-5 Agarski B., Budak I., Ilić Mićunović M., Vukelić Đ.: Analysis of Steel Production Life Cycle Inventory Datasets, 22. International Symposium for Production Research - ISPR, Antalya: Springer, Towards Industry 5.0, Lecture Notes in Mechanical Engineering, 6-8 October, 2022, pp. 609-617, ISBN 978-3-031-24456-8 Puškar N., Puškar M., Šokac M., Santoši Ž., Kuzmanović M., Budak I., Vukelić Đ.: Analysis of surface roughness and static friction coefficient of Co-Cr-Mo alloy for removable partial deture framework, 18. International Conference on Tribology - SERBIATRIB, Kragujevac: Serbian Tribology Society and Faculty of Engineering, 17-19 May, 2023, pp. 668-674, ISBN 978-86-6335-103-5 Jovičić G., Milošević A., Šokac M., Santoši Ž., Kočović V., Šimunović G., Vukelić Đ.: The modelling of surface roughness after the turning of inconel 601 by using artificial neural network, 18. International Conference on Tribology - SERBIATRIB, Kragujevac: Serbian Tribology Society and Faculty of Engineering, 17-19 May, 2023, pp. 779-788, ISBN 978-86-6335-103-5 Kočović V., Kostić S., Džunić D., Petrović Savić S., Bijelić I., Miljanić D., Vukelić Đ.: Optimization of the micro-cutting process in order to reduce the surface roughness, 18. International Conference on Tribology - SERBIATRIB, Kragujevac: Serbian Tribology Society and Faculty of Engineering, 17-19 May, 2023, pp. 587-594, ISBN 978-86-6335-103-5 Santoši Ž., Šokac M., Milošević A., Ivanov V., Vukelić Đ.: 3D reconstruction of machine vise by application of photogrammetry and reverse engineering , 15. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, University of Novi Sad, 24-26 September, 2024, pp. 123-126, ISBN 978-86-6022-681-7 Devedžić G., Kočović V., Đorđević A., Jovanović Pešić Ž., Džunić D., Vukelić Đ., Petrović Savić S.: Reconstruction and optimization of complex geometric parts through reverse engineering, 15. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 24-26 September, 2024, pp. 51-54, ISBN 978-86-6022-681-7 Jovanović S., Ranisavljev M., Milošević A., Ilić Mićunović M., Vukelić Đ., Agarski B.: Life cycle assessment of machining processes: turning, milling, and drilling, 15. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 24-26 September, 2024, pp. 211-214, ISBN 978-86-6022-681-7 Milošević A., Kočović V., Santoši Ž., Šokac M., Šimunović G., Tadić B., Vukelić Đ.: Modelling the boring process on the basis of centrifugal force using a specially designed tool holder, 15. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 24-26 September, 2024, pp. 95-98, ISBN 978-86-6022-681-7	76	76.00
M34	Saopštenje sa međunarodnog skupa štampano u izvodu Saopštenje sa međunarodnog skupa štampano u izvodu Puškar T., Lainović T., Hadžistević M., Blažić L., Potran M., Trifković B., Vukelić Đ.: Analytical study of the influence of impression materials and techniques on the accuracy of lost wax technique in dentistry- using Ishikawa diagram, 4. International Scientific Conference "Contemporary Materials", Banja Luka, 1-2 July, 2011, pp. 164-164 Jeremić B., Meyer M., Mačužić I., Bogdanović B., Jeremić M., Simić A., Tadić B., Vukelić Đ.: Fixtures for Horizontal Machining Centers – New Projecting Approach, 8. ASME International Manufacturing Science and Engineering Conference (MSEC), Wisconsin: University of Wisconsin-Madison, 10-14 June, 2013, pp. 1-1 Agarski B., Budak I., Vukelić Đ., Kosec B., Hodolič J.: Integrating subjective weighting into the life cycle impact assessment by the application of multi-criteria analysis, 20. SETAC Europe - LCA Case Study Symposium, Novi Sad: SETAC, 24-26 November, 2014, pp. 68-68, ISBN 2310-3191 Agarski B., Dorić J., Milanković D., Kljajin M., Antić A., Vukelić Đ.: Life Cycle Assessment of Internal Combustion Engine Constructions, 20. SETAC Europe - LCA Case Study Symposium, Novi Sad: SETAC, 24-26 November, 2014, pp. 59-60, ISBN 2310-3191 Vještica S., Hodolič J., Milanović B., Kolaković S., Vukelić Đ.: LCA of PVC flor coverings: the case study of the production stage, 20. SETAC Europe - LCA Case Study Symposium, Novi Sad: SETAC, 24-26 November, 2014, pp. 48-48, ISBN 2310-3191 Lazarević M., Ostojić G., Stankovski S., Sremčev N., Vukelić Đ.: Improvement of product disassemly and recycling process based on LCA analisys, 20. SETAC Europe - LCA Case Study Symposium, Novi Sad: SETAC, 24-26 November, 2014, pp. 62-62, ISBN 2310-3191 Agarski B., Budak I., Vukelić Đ., Hodolič J.: Using external and internal normalization approaches in life cycle impact assessment, 4. Young Environmental Scientists Meeting - YES, Petnica: Society of Environmental Toxicology and Chemistry - SETAC, 14-19 March, 2015, pp. 79-79 Agarski B., Budak I., Vukelić Đ., Szita Toth K., Hodolič J.: The model for optimal transport selection based on multi-criteria decision making and life cycle assessment, 26. SETAC Europe Annual Meeting, Nant: SETAC Europe, 22-26 May, 2016, pp. 139-139 Agarski B., Budak I., Kosec B., Vukelić Đ.: Circular economy actions: life cycle assessment of plastic packaging waste, 7. ISWA World Congress, Novi Sad: Faculty of Technical Sciences, 19-21 September, 2016, pp. 1626-1626, ISBN 978-86-7892-837-6 Agarski B., Budak I., Šimunović G., Kosec B., Vukelić Đ.: Evaluation of eco-design alternatives through integrating life cycle impact assessment and multi-criteria decision aiding, 85. Meeting of European Working Group on MCDA, Padova: European Working Group on MCDA, 20-22 April, 2017, pp. 7-7 Agarski B., Vukelić Đ., Šimunović K., Budak I.: Assessment of environmental loading of urban area by using fuzzy multi-criteria decision making, 5. International Scientific Conference "Marketing Management, Trade, Financial and Social Aspects of Business", Košice: Vydavateľstvo EKONÓM, Bratislava, 18-20 May, 2017, pp. 17-17, ISBN 978-80-225-4384-2 Puškar T., Budak I., Šokac M., Santoši Ž., Laban Terzija J., Vukelić Đ.: Personalized Bone Grafts Design by Application of Computer Aided Technologies, 1. International Association for Dental Research, London, 2018, pp. 3372-3372 Agarski B., Ubavin D., Vukelić Đ., Ilić Mićunović M., Budak I.: LCA in Field of Safety at Work: A New Engineering Study Subject, 9. International Conference on Life Cycle Management - LCM, Poznan: Poznan University of Technology, 1-4 September, 2019, pp. 388-388, ISBN 978-83-929466-2-5 Agarski B., Ilić Mićunović M., Vukelić Đ., Budak I.: Analysis of LCA and Eco-design Application in Scientific Publications from Serbia, 9. International Conference on Life Cycle Management - LCM, Poznan: Poznan University of Technology, 1-4 September, 2019, pp. 45-45, ISBN 978-83-929466-2-5 Puškar T., Budak I., Vukelić Đ., Jevremović D., Trifković B.: The corrosive effect of artificial saliva of variable pH on DMLS and cast Co-Cr-Mo dental alloy, 26. International Conference on Dental Treatment, Wien, 2019, pp. 42-42 Ćojbašić (Radović) S., Turk Sekulić M., Pap S., Agarski B., Vukelić Đ., Radonić (Jakšić) J., Dmitrašinović S., Prodanović J.: Life cycle assessment of nature-based solution for wastewater treatment, 22. European Meeting on Environmental Chemistry (EMEC22), Ljubljana, 5-8 December, 2022, pp. 111-111, ISBN 978-961-297-034-5 Puškar T., Budak I., Jeremić-Knežević M., Đurović Koprivica D., Maletin (Anđelković) A., Puškar M., Vukelić Đ.: APPLICATION OF MODERN TECHNOLOGIES AND COMPUTER AIDED SYSTEMS IN PROSTEHTIC DENTISTRY, 2. PSU-UNS Joint Conference on Medical Science and Technology, Novi Sad, 11-13 October, 2023, pp. 71-72 Agarski B., Maoduš N., Ubavin D., Jovanović S., Milošević A., Ilić Mićunović M., Vukelić Đ.: Life Cycle Assessment of products based on environmental product declarations data , 29. International Symposium on Analytical and Environmental Problems, Segedin: University of Szeged, H-6720 Szeged, Dugonics tér 13, Hungary, 13-14 November, 2023, pp. 10-10, ISBN 978-963-306-963-9 Agarski B., Jovanović S., Ilić Mićunović M., Vukelić Đ.: Evaluation of ionising radiation with life cycle impact assessment methods, 12. International Conference on Radiation, Natural Sciences, Medicine, Engineering, Technology and Ecology (RAD), Herceg Novi, 17-21 June, 2024, pp. 39-39, ISBN 978-86-901150-7-5	19	9.50
M42	Monografija nacionalnog značaja, monografsko izdanje građe, prevod izvornog teksta Monografija nacionalnog značaja, monografsko izdanje građe, prevod izvornog teksta Vukelić Đ.: Automatizovano pojektovanje pribora, Novi Sad, Fakultet tehničkih nauka, 2012, str. 1-186, ISBN 978-86-7892-428-6	1	5.00
M43	Monografska bibliografska publikacija Monografska bibliografska publikacija Hadžistević M., Vukelić Đ., Budak I., Matin I., Stepien K., Adamczak S.: Merenje/modeliranje geometrijskih specifikacija proizvoda, Novi Sad, Fakultet tehničkih nauka, 2009, ISBN 978-86-7892-194-0 Budak I., Hodolič J., Bešić I., Vukelić Đ., Osanna H., Durakbasa N.: Koordinatne merne mašine i CAD inspekcija, Novi Sad, Fakultet tehničkih nauka, 2009, ISBN 978-86-7892-195-7 Budak I., Hodolič J., Hadžistević M., Vukelić Đ., Kosec B., Karpe B.: Označavanje proizvoda o zaštiti životne sredine, Novi Sad, Fakultet tehničkih nauka, 2009, ISBN 978-86-7892-190-2 Hodolič J., Vukelić Đ., Budak I., Bešić I., Muransky J.: Ekodizajn i održivi razvoj u mašinskom inženjerstvu, Novi Sad, Fakultet tehničkih nauka, 2009, ISBN 978-86-7892-182-7	4	12.00
M51	Rad u vodećem časopisu nacionalnog značaja Rad u vodećem časopisu nacionalnog značaja Tadić B., Vukelić Đ., Jeremić B.: Defining a theoretical model of wear - caused failure of tool machine elements, Tribology in Industry, 2010, Vol. 32, No. 2, pp. 19-25, ISSN 0354-8996 Matin I., Hadžistević M., Vukelić Đ., Milutinović M., Golebski R.: Application of numerical simulation of injection molding of medical accessory, Journal for Technology of Plasticity, 2016, Vol. 41, No. 1, pp. 47-55, ISSN 0354-3870 Vukelić Đ., Tadić B., Šimunović G., Miljanić D., Lazarević M., Todorović P.: Comparative analysis of clamping element geometries and their impact on fixture-workpiece interface compliance, Machine Design, 2016, Vol. 8, No. 4, pp. 121-128, ISSN 1821-1259	3	6.00
M52	Rad u časopisu nacionalnog značaja Rad u časopisu nacionalnog značaja Vukelić Đ., Hodolič J.: Razvoj sistema za projektovanje pribora za mašinsku obradu upotrebom zaključivanja na osnovu slučaja, Journal of Applied Engineering Science, 2008, Vol. 6, No. 22, pp. 39-48, ISSN 1451-4117 Vukelić Đ., Župerl U., Hodolič J., Križan P.: Analiza mogućnosti primene RFID tehnologije u procesu montaže/demontaže pribora, Journal of Applied Engineering Science, 2009, Vol. 7, No. 23-24, pp. 27-34, ISSN 1451-4117 Ostojić G., Stankovski S., Vukelić Đ.: Handling Automation of Fixtures and Fixture Elements in Flexible Technological Structures, Journal of Applied Engineering Science, 2009, Vol. 7, No. 4, pp. 7-12, ISSN 1451-4117 Križan P., Lubomir S., Vukelić Đ.: A study of impact technological parametres on the briquetting process, Facta universitatis - series: Working and Living Enviromental Protection, 2009, Vol. 6, No. 1, pp. 39-47, ISSN 0354–804X Vukelić Đ., Budak I., Tadić B., Lužanin O., Hadžistević M., Križan P.: Automated generation of workpiece locating scheme in fixture design, Journal of Applied Engineering Science, 2011, Vol. 9, No. 3, pp. 383-392, ISSN 1451-4117 Puškar T., Jevremović D., Eggbeer D., Lapčević A., Trifković B., Vukelić Đ., Williams R.: Determination of corrosion characteristics of dental alloy by inductively coupled plasma mass spectrometry, Journal of Production Engineering, 2013, Vol. 16, No. 1, pp. 77-80, ISSN 1821-4932 Matin I., Potran M., Hadžistević M., Hodolič J., Vukelić Đ., Puškar T., Drstvenšek I., Vrba I.: Development of the simulation model for casting of metal substructure of metal-ceramic crown, Journal of Production Engineering, 2013, Vol. 16, No. 2, pp. 49-52, ISSN 1821-4932 Župerl U., Čuš F., Irgolič T., Vukelić Đ.: Indirect tool wear measuring technique combined with optoelectronic system for automated tool condition control, Journal of Production Engineering, 2014, Vol. 17, No. 1, pp. 47-50, ISSN 1821-4932 Jevremović A., Jevremović D., Trifković B., Santoši Ž., Vukelić Đ.: Application of CAD/CAM technology in the design and creation of full anatomic bridge form zirconium dioxide, Journal of Production Engineering, 2015, Vol. 18, No. 1, pp. 73-75, ISSN 1821-4932 Tadić B., Matejić M., Kočović V., Novkinić B., Brzaković Lj., Šimunović G., Vukelić Đ.: Development a group fixture systems for machining centers, Journal of Production Engineering, 2016, Vol. 19, No. 1, pp. 69-74, ISSN 1821-4932 Agarski B., Budak I., Ilić Mićunović M., Imamović N., Kosec B., Kljajin M., Vukelić Đ.: Internal normalization in life cycle assessment using the multi-criteria analysis approach, Journal of Production Engineering, 2016, Vol. 19, No. 2, pp. 57-60, ISSN 1821-4932 Vukelić Đ., Šimunović G., Šarić T., Matin I., Savković B., Lazarević M., Tadić B.: Computer-aided design and optimization of fixtures for plastic parts machining, Journal of Production Engineering, 2018, Vol. 21, No. 1, pp. 49-54, ISSN 1821-4932 Vukelić Đ., Šokac M., Budak I., Šarić T., Matin I., Santoši Ž., Šimunović G.: Fixtures design for thin-walled cylindrical workpieces on the principles of group technology, Journal of Production Engineering, 2019, Vol. 22, No. 1, pp. 25-28, ISSN 1821-4932 Miljojković J., Šimunović G., Vukelić Đ., Tadić B.: Analysis of application possibilities of short-circuit effects in metal coating technologies, Journal of Production Engineering, 2019, Vol. 22, No. 2, pp. 15-18, ISSN 1821-4932	14	21.00
M53	Rad u naučnom časopisu Rad u naučnom časopisu Vukelić Đ., Hodolič J.: Automation fixtures design for group technologies, Acta Mechanica Slovaca, 2005, Vol. 8, No. 4, pp. 35-42, ISSN 1335-2393 Hodolič J., Matin I., Vukelić Đ., Antić A.: Using compex surfaces for Core and Cavity design of mold, Journal of Manufacturing Engineering, 2006, Vol. 2, No. 5, pp. 39-41, ISSN 1335-7972 Vukelić Đ., Hodolič J.: System for computer aided modular fixtures design, Journal of Manufacturing Engineering, 2006, Vol. 2, No. 5, pp. 47-51, ISSN 1335-7972 Vukelić Đ., Hodolič J., Hadžistević M., Vrečič T., Kogej P.: Statistic quality control of a production using applicative software Gaus SPC, Acta Mechanica Slovaca, 2007, Vol. 11, No. 3, pp. 67-76, ISSN 1335-2393 Križan P., Vukelić Đ.: Shape of pressing chamber for wood biomass compacting, International Journal for Quality Research, 2008, Vol. 2, No. 3, pp. 193-197, ISSN 1800-6450 Križan P., Šooš L., Vukelić Đ.: Compacting of pine sawdust, Education, Research and Innovation, 2008, Vol. 1, No. 1, pp. 2-7, ISSN 1337-9089 Vukelić Đ., Hodolič J., Onderova I., Križan P., Agarski B.: An expert system for fixture design, Education, Research and Innovation, 2008, Vol. 1, No. 1, pp. 21-26, ISSN 1337-9089 Vukelić Đ., Hodolič J., Agarski B.: Handling automation of fixture and fixture elements in flexible technological structures, Journal of Manufacturing Engineering, 2008, Vol. 7, No. 4, pp. 86-90, ISSN 1335-7972 Vukelić Đ., Hodolič J., Križan P.: Modular fixtures database, Journal of Manufacturing Engineering, 2008, Vol. 7, No. 2, pp. 30-33, ISSN 1335-7972 Vukelić Đ., Hodolič J.: Information system for fixture design, Acta Mechanica Slovaca, 2008, Vol. 12, No. 4, pp. 103-114, ISSN 1335-2393 Vukelić Đ., Hodolič J., Vrečič T., Kogej P.: Development of a system for statistical quality control of the production process, Facta universitatis - series: Mechanical Engineering, 2008, Vol. 6, No. 1, pp. 75-90, ISSN 0354–2025 Vukelić Đ., Tadić B., Hodolič J.: Stanje i tendencije razvoja računarom podržanog projektovanja pribora u mašinskoj obradi rezanjem, Tehnika - Mašinstvo, 2009, Vol. 58, No. 2, pp. 1-11, ISSN 0461-2531 Vukelić Đ., Hodolič J.: Machining fixture design via expert system, Machine Design, 2009, pp. 17-20, ISSN 1821-1259 Križan P., Soos L., Vukelić Đ.: Counter pressure effecting on compacted briquette in pressing chamber, Journal of Production Engineering, 2009, Vol. 12, No. 1, pp. 63-66, ISSN 1821-4932, UDK: 621 Vukelić Đ., Tadić B., Hodolič J., Matin I., Križan P.: Development a database of modular fixtures, Journal of Production Engineering, 2009, Vol. 12, No. 1, pp. 79-82, ISSN 1821-4932, UDK: 621 Vukelić Đ., Tadić B., Hodolič J., Krizan P., Simeunović N.: Development of an inteligent system for fixture design using case-based reasoning (CBR) technique, Journal of Manufacturing Engineering, 2009, Vol. 8, No. 4, pp. 8-11, ISSN 1335-7972 Agarski B., Budak I., Hodolič J., Vukelić Đ.: Multicriteria Approach for Assessment of Environment Quality, International Journal for Quality Research, 2010, Vol. 4, No. 2, pp. 131-137, ISSN 1800-6450 Vukelić Đ., Tadić B., Hodolič J., Simeunović N.: A brief review of fixture design and automation, Machine Design, 2010, Vol. 2, No. 1, pp. 7-12, ISSN 1821-1259 Matin I., Hadžistević M., Hodolič J., Vukelić Đ., Tadić B.: Development of CAD/CAE System for Mold Design, Journal of Production Engineering, 2010, Vol. 13, No. 1, pp. 61-64, ISSN 1821-4932, UDK: 621 Vukelić Đ., Tadić B., Sovilj B., Hodolič J.: Form tools automation design, Journal of Production Engineering, 2010, Vol. 13, No. 1, pp. 41-44, ISSN 1821-4932 Krizan P., Soos L., Matus M., Svatek M., Vukelić Đ.: Evaluation of measured data from research of parameters impact on final briquettes density, Journal of Applied Mathematics, 2010, Vol. 3, No. 3, pp. 69-76, ISSN 1337-6365 Vukelić Đ., Vrečič T., Kogej P., Hodolič J., Tadić B.: Development of software for statistical process control, Annals of Faculty Engineering Hunedoara - International Journal of Engineering, 2010, Vol. 8, No. 1, pp. 13-20, ISSN 1584-2665 Ostojić G., Stankovski S., Vukelić Đ., Lazarević M., Križan P.: Maintenance with the usage of RFID technology, Education, Research and Innovation, 2010, Vol. 3, No. 2, pp. 2-7, ISSN 1337-9089 Pilić V., Dorić J., Hodolič J., Bešić I., Vukelić Đ.: Short contribution of application of reverse engineering based on feature recognition, Education, Research and Innovation, 2010, Vol. 3, No. 2, pp. 14-18, ISSN 1337-9089 Križan P., Šooš Lj., Vukelić Đ.: A type of pressed material importance at briquetting and palleting, Education, Research and Innovation, 2010, Vol. 3, No. 2, pp. 19-26, ISSN 1337-9089 Ostojić G., Stankovski S., Lazarević M., Vukelić Đ., Onderova I.: Use of RFID technology in disassembly system, Education, Research and Innovation, 2010, Vol. 3, No. 2, pp. 27-31, ISSN 1337-9089 Župerl U., Čuš F., Vukelić Đ.: Variable clamping force control for an inteligent fixturing, Journal of Production Engineering, 2011, Vol. 14, No. 1, pp. 19-22, ISSN 1821-4932 Vukelić Đ., Tadić B., Jocanović M., Lužanin O., Simeunović N.: A System for Computer-Aided Selection of Cutting Tools, Acta Technica Corviniensis, 2011, Vol. 4, No. 4, pp. 89-92, ISSN 2067-3809 Krizan P., Matuš M., Kers J., Vukelić Đ.: Change of Pressing Chamber Conicalness at Briquetting Process in Briquetting Machine Pressing Chamber, Acta Polytechnica, 2012, Vol. 52, No. 3, pp. 60-65, ISSN 1210-2709 Jevremović D., Trifković B., Lapčević A., Puškar T., Budak I., Vukelić Đ., Hodolič J.: The Use of CAD/CAM Technology in Design and Manufacture of Thin Laminate Veneers, Journal of Manufacturing Engineering, 2012, Vol. 11, No. 3, pp. 54-56, ISSN 1335-7972 Dramićanin M., Vukelić Đ.: Razvoj sistema za višekriterijumsko vrednovanje konstrukcija pribora, Zbornik radova Fakulteta tehničkih nauka, 2012, Vol. 17, No. 18, pp. 3787-3790, ISSN 0350-428X Agarski B., Budak I., Puškar T., Vukelić Đ., Marković D., Hadžistević M., Hodolič J.: Multi-criteria assessment of environmental and occupational safety measures in dental prosthetics laboratories, Journal of Production Engineering, 2012, Vol. 15, No. 1, pp. 53-56, ISSN 1821-4932 Hadžistević M., Štrbac B., Budak I., Vukelić Đ., Hodolič J.: Analysis of the operator influence on the accuracy of the calibration styli results in CMM, Journal of Production Engineering, 2012, Vol. 15, No. 1, pp. 41-44, ISSN 1821-4932 Sabo V., Vukelić Đ.: Implementacija metodologije ekodizajna u procese projektovanja specijanih pribora, Zbornik radova Fakulteta tehničkih nauka, 2013, Vol. 27, No. 1, pp. 5-8, ISSN 0350-428X Matin I., Hadžistević M., Hodolič J., Vukelić Đ.: Practical Ascpects of Integration in the Developed Mold Design System, Acta Technica Corviniensis, 2014, Vol. 7, No. 2, pp. 41-44, ISSN 2067-3809 Milenković V., Vukelić Đ.: Implementacija ekološko-inženjerskih aspekata u proces projektovanja pribora, Zbornik radova Fakulteta tehničkih nauka, 2015, Vol. 30, No. 12, pp. 2199-2202, ISSN 0350-428X Stipić N., Vukelić Đ.: Implementacija ekodizajna u proces proizvodnje steznika za koleno, Zbornik radova Fakulteta tehničkih nauka, 2015, Vol. 30, No. 11, pp. 2101-2104, ISSN 0350-428X Šokac M., Budak I., Miljanović D., Santoši Ž., Vukelić Đ.: Computer-aided modeling and additive manufacturing fabrication of patient-specific mandibular implant, Clinician and Technology, 2018, Vol. 48, No. 4, pp. 113-117, ISSN 0301-5491 Matin I., Vukelić Đ., Hadžistević M., Štrbac B., Lukić D.: An integrated approach for design and manufacture of plastic products, Applied Engineering Letters, 2019, Vol. 4, No. 1, pp. 1-5, ISSN 2466-4677 Agarski B., Vukelić Đ., Hadžistević M., Ilić Mićunović M., Budak I.: Attributional versus consequentional life cycle assessment modelling in metalworking production system , Mašinstvo, 2019, Vol. 16, No. 1-2, pp. 37-42, ISSN 1512-5173 Ristić L., Vukelić Đ.: Tribodijagnostika statičkog koeficijenta trenja po principu kose ravni, Zbornik radova Fakulteta tehničkih nauka, 2019, Vol. 34, No. 9, pp. 1491-1494, ISSN 0350-428X Đokić N., Vukelić Đ.: Tribodijagnostika statičkog koeficijenta trenja kontaktnih parova od drveta, Zbornik radova Fakulteta tehničkih nauka, 2019, Vol. 34, No. 11, pp. 1945-1948, ISSN 0350-428X Blažević R., Vukelić Đ.: Tribodijagnostika kinematskog koeficijenta trenja metodom blok na disku, Zbornik radova Fakulteta tehničkih nauka, 2019, Vol. 34, No. 3, pp. 443-446, ISSN 0350-428X Kuzmanović M., Ilić Mićunović M., Budak I., Puškar T., Vukelić Đ., Đurović Koprivica D.: Sampling of micro and nano particles from aerosols generated during dental interventions, Journal of Production Engineering, 2022, Vol. 25, No. 2, pp. 35-38, ISSN 1821-4932 Milošević A., Agarski B., Vukelić Đ.: Ocenjivanje životnog ciklusa modularnog pribora za obradu poklopca kućišta, Zbornik radova Fakulteta tehničkih nauka, 2023, Vol. 38, No. 11, pp. 1529-1532, ISSN 0350-428X	45	45.00
M54	Uređivanje vodećeg naučnog časopisa nacionalnog značaja (na godišnjem nivou) Uređivanje vodećeg naučnog časopisa nacionalnog značaja (na godišnjem nivou) Vukelić Đ.: Editorial Board, Tribology in Industry, 2016, Vol. 38, ISSN 0354-8996 Vukelić Đ.: Editorial Board, Tribology in Industry, 2017, Vol. 39, ISSN 0354-8996 Vukelić Đ.: Editorial Board, Tribology in Industry, 2018, Vol. 40, ISSN 0354-8996 Vukelić Đ.: Editorial Board, Tribology in Industry, 2019, Vol. 41, ISSN 0354-8996 Vukelić Đ.: Editorial Board, Tribology in Industry, 2020, Vol. 42, ISSN 0354-8996 Vukelić Đ.: Editorial Board, Tribology in Industry, 2021, Vol. 43, ISSN 0354-8996 Vukelić Đ.: Editorial Board, Tribology in Industry, 2022, Vol. 44, ISSN 0354-8996 Vukelić Đ.: Editorial Board, Tribology in Industry, 2023, Vol. 45, ISSN 0354-8996 Vukelić Đ.: Editorial Board, Tribology in Industry, 2024, ISSN 0354-8996	9	18.00
M61	Predavanje po pozivu sa skupa nacionalnog značaja štampano u celini Predavanje po pozivu sa skupa nacionalnog značaja štampano u celini Hodolič J., Plančak M., Vilotić D., Hadžistević M., Budak I., Vukelić Đ.: Primena savremenih tehnologija i računarom podržanih sistema za modelovanje i izradu dentalnih nadoknada, 38. JUPITER konferencija, Beograd: Mašinski fakultet, 15-16 Maj, 2012, pp. 35-48, ISBN 978-86-7083-757-7 Petrović P., Hodolič J., Vićentić A., Pilipović M., Jakovljević Ž., Danilov I., Lukić N., Baltić P., Vukelić Đ., Budak I., Hadžistević M., Miković V.: Inteligentni robotski sistemi za ekstremno diverzifikovanu proizvodnju, 38. JUPITER konferencija, Beograd: Mašinski fakultet, 15-16 Maj, 2012, pp. 49-66, ISBN 978-86-7083-757-7 Petrović P., Hodolič J., Danilov I., Lukić N., Vukelić Đ.: Robotski asistirana 3D ultrazvucna medicinska dijagnostika - Novi Co-x konceptualni okvir za lekar-robot-pacijent kolaborativni rad, 8. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Fakultet tehničkih nauka, 12-13 Jun, 2013, pp. 87-96, ISBN 978-86-7892-512-2 Agarski B., Budak I., Vukelić Đ., Ilić Mićunović M., Kosec B.: Odmeravanje kod ocenjivanja uticaja životnog ciklusa , 7. Memorijalni naučni skup iz zaštite životne sredine "Docent dr Milena Dalmacija", Novi Sad: Prirodno Matematički Fakultet, Univerzitet u Novom Sadu, 1-2 April, 2019, pp. 128-134, ISBN 978-86-7031-510-5	4	6.00
M63	Saopštenje sa skupa nacionalnog značaja štampano u celini Saopštenje sa skupa nacionalnog značaja štampano u celini Vukelić Đ., Hodolič J.: Baza podataka montažno – demontažnih pribora, 29. Savetovanje proizvodnog mašinstva Jugoslavije sa međunarodnim učešćem, Beograd: LOLA Institut, 1-2 Septembar, 2002, pp. 19-22 Budak I., Matin I., Vukelić Đ., Hodolič J.: Jedan prilaz automatizaciji postupaka modeliranja grupe proizvoda primenom programskog sistema Pro/ENGINEER, 29. JUPITER konferencija, Beograd: Mašinski fakultet, 1-2 Februar, 2003, pp. 13-16, ISBN 86-7083-459-6 Sovilj B., Igartua A., Klugmann E., Vukelić Đ.: Tribološki procesi veštačkog zgloba kuka, 8. International Conference on Tribology - SERBIATRIB, Beograd: Mašinski fakultet, 8-10 Oktobar, 2003, pp. 98-102 Vukelić Đ., Hodolič J.: Automatizacija izbora i projektovanja pribora u određenim grupnim operacijama obrade, 8. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Fakultet tehničkih nauka, 26 Jun, 2003, pp. 123-124 Vukelić Đ., Budak I., Hodolič J.: Razvoj CAD modula u jednom CAD/CAPP/CAM programskom sistemu, 6. Međunarodni naučno-stručni skup o dostignućima elektrotehnike, mašinstva i informatike - DEMI, Banja Luka: Mašinski fakultet, 30-31 Maj, 2003, pp. 237-246, ISBN 99938-623-8-X Hadžistević M., Vukelić Đ., Sovilj B.: Prilog razvoju programskog rešenja CAPP modula jednog CAD/CAPP/CAM programskog sistema, 6. Međunarodni naučno-stručni skup o dostignućima elektrotehnike, mašinstva i informatike - DEMI, Banja Luka: Mašinski fakultet, 30-31 Maj, 2003, pp. 247-250, ISBN 99938-623-8-X Vukelić Đ., Antić A., Sovilj B.: Razvoj baze podataka za rezne alate u specijalizovanom CAD/CAPP/CAM sistemu, 7. Međunarodni naučno-stručni skup o dostignućima elektro i mašinske industrije - DEMI, Banja Luka: Mašinski fakultet, 27-28 Maj, 2005, pp. 411-416, ISBN 999328-39-08-6 Vukelić Đ., Todić V., Budak I., Hodolič J.: Baza podataka i baza znanja za pribore u specijalizovanom CAD/CAPP/CAM programskom sistemu, 30. Savetovanje proizvodnog mašinstva Srbije i Crne Gore sa međunarodnim učešćem, Čačak: Tehnički fakultet, 1-3 Septembar, 2005, pp. 135-138, ISBN 86-7776-009-1 Sovilj B., Antić A., Vukelić Đ., Birčanin B.: Baza podataka za alate za obradu rezanjem, 31. JUPITER konferencija, Zlatibor: Mašinski fakultet u Beogradu, 12-14 April, 2005, pp. 59-63, ISBN 86-7083-508-8 Budak I., Hodolič J., Antić A., Hadžistević M., Vukelić Đ.: Razvoj modela za projektovanje i izradu proizvoda na principima reverzibilnog inženjerstva, 9. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Fakultet tehničkih nauka, 15-16 Jun, 2006, pp. 85-86, ISBN 86-85211-96-4 Vukelić Đ.: Upotreba statističkih metoda u proizvodnim procesima, 1. Informativno edukativni skup - ETIKUM, Novi Sad: Fakultet tehničkih nauka, 4-5 April, 2006, pp. 77-108, ISBN 978-86-7892-037-0 Hodolič J., Vukelić Đ., Matin I., Miladinov Ž.: Primena složenih površina u reverzibilnom inženjerskom modeliranju proizvoda, 9. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Fakultet tehničkih nauka, 15-16 Jun, 2006, pp. 91-92, ISBN 86-85211-96-4 Vukelić Đ., Hodolič J., Hadžistević M., Vrečič T.: Automatizacija primene statističkih metoda za ocenu stabilnosti, sposobnosti i performansi procesa, 9. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Fakultet tehničkih nauka – Institut za proizvodno mašinstvo, 15-16 Jun, 2006, pp. 81-82, ISBN 86-85211-96-4 Hodolič J., Vukelić Đ., Agarski B., Huđik Č.: Briketiranje biomase i inženjerstvo zaštite životne sredine, 34. Nacionalna konferencija o kvalitetu "Festival kvaliteta", Kragujevac: Mašinski fakultet, 7-10 Maj, 2007, pp. 1-4, ISBN 85-86663-09-5 Vukelić Đ., Hodolič J.: Unifikacija konstrukcije pribora, 33. JUPITER konferencija, Zlatibor: Mašinski fakultet u Beogradu, 15-16 Maj, 2007, pp. 130-135, ISBN 978-86-7083-592-4 Vukelić Đ., Hodolič J., Bešić I.: Klasifikacija pribora kao metod racionalizacije automatizovanog projektovanja pribora, 8. Međunarodni naučno-stručni skup o dostignućima elektrotehnike, mašinstva i informatike - DEMI, Banja Luka: Mašinski fakultet, 25-26 Maj, 2007, pp. 303-308, ISBN 978-99938-39-15-6 Mihajlović G., Hodolič J., Vukelić Đ.: Automatizacija projektovanja grupnih pribora pomoću programskog sistema ProENGINEER, 1. Techno-Educa, Zenica, 17-18 Maj, 2007, pp. 156-165, ISBN 1840-2526 Hodolič J., Hadžistević M., Vukelić Đ., Zajac A.: Reciklaža i prerada otpadnih pneumatika, 35. Nacionalna konferencija o kvalitetu, Kragujevac: Mašinski fakultet, 13-15 Maj, 2008, pp. 1-4, ISBN 978-85-86663-25-2 Koldžin D., Hodolič J., Arsovski S., Vojinović-Miloradov M., Vukelić Đ., Budak I., Mehandžić D.: Unapređenje i razvoj pristupa zaštiti životne sredine u Republici Srbiji, 35. Nacionalna konferencija o kvalitetu, Kragujevac: Mašinski fakultet, 13-15 Maj, 2008, pp. 1-4, ISBN 978-85-86663-25-2 Vukelić Đ., Hodolič J., Todić V., Sovilj B.: Model integralnog sistema za projektovanje pribora, 34. JUPITER konferencija, Beograd: Mašinski fakultet u Beogradu, 4-5 Jun, 2008, pp. 46-51, ISBN 978-86-7083-628-0 Hodolič J., Hadžistević M., Matin I., Vukelić Đ., Budak I., Bešić I., Adamczak S.: Projekat „ETIQUM“ - osnova za poboljšanje postojećeg sistema kontinualne edukacije iz područja metrologije, kvaliteta i standardizacije , 32. Savetovanje proizvodnog mašinstva Srbije sa međunarodnim učešćem, Novi Sad: Fakultet tehničkih nauka, 18-20 Septembar, 2008, pp. 427-430, ISBN 978-86-7892-131-5 Borojević S., Jovišević V., Vukelić Đ.: Razvoj podsistema za izbor komponenti modularnih pribora, 32. Savetovanje proizvodnog mašinstva Srbije sa međunarodnim učešćem, Novi Sad: Fakultet tehničkih nauka, 18-20 Septembar, 2008, pp. 509-512, ISBN 978-86-7892-131-5 Hodolič J., Bešić I., Vukelić Đ., Budak I., Kuric I.: Savremeni prilazi u programiranju i postprocesiranju upravljačkih informacija za NUMM, 32. Savetovanje proizvodnog mašinstva Srbije sa međunarodnim učešćem, Novi Sad: Fakultet tehničkih nauka, 18-20 Septembar, 2008, pp. 525-528, ISBN 978-86-7892-131-5 Vukelić Đ., Hodolič J., Agarski B.: Primena zaključivanja na osnovu slučaja u projektovanju pribora za mašinsku obradu, 35. JUPITER konferencija, Beograd: Mašinski fakultet u Beogradu, 17-18 Jun, 2009, pp. 15-20, ISBN 978-86-7083-666-2 Križan P., Vukelić Đ.: Vlastnosti niektorych druhov materialov pri lisovani, 15. International Conference "Engineering and Environment Protection", Bratislava: Faculty of Mecanical Engineering, 17-19 Jun, 2009, pp. 289-296, ISBN 978-80-227-3096-9 Simeunović N., Vukelić Đ., Nešković I., Kovačević I., Hodolič J.: Kontinualno obrazovanje na FTN u kontekstu celoživotnog učenja, 17. Skup "Trendovi razvoja" - TREND, Kopaonik: Fakultet tehničkih nauka u Novom Sadu, 7-10 Mart, 2011, pp. 253-256, ISBN 978-86-7892-323-4 Lainović T., Puškar T., Hadžistević M., Blažić L., Potran M., Trifković B., Vukelić Đ.: Analitička studija uticaja otisnih materijala i tehnika na preciznost izrade zubne nadoknade konvencionalnom metodom, korišćenje Išikava dijagrama, 4. International Scientific Conference "Contemporary Materials", Banja Luka: Akademija nauka i umjetnosti Republike Srpske, 1-2 Jul, 2011, pp. 297-307, ISBN 978-99938-21-37-3 Marković V., Vukelić Đ., Agarski B., Milanković D., Milanović B.: Review of methodologies for supporting life cycle assessment - ecodesign and life cycle costing, 7. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Fakultet tehničkih nauka, 12-13 Jun, 2013, pp. 199-202, ISBN 978-86-7892-512-2 Agarski B., Budak I., Puškar T., Vukelić Đ., Marković D., Hodolič J.: Objektivni pristup određivanju težina kriterijuma pri višekriterijmskom vrednovanju kvaliteta mera zaštite na radu u dentalnim laboratorijama, 7. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Fakultet tehničkih nauka, 12-13 Jun, 2013, pp. 83-86, ISBN 978-86-7892-512-2 Matin I., Potran M., Hadžistević M., Hodolič J., Vukelić Đ., Puškar T.: Razvoj simulacionog modela metalne substrukture za metalokeramičku krunicu, 7. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Fakultet tehničkih nauka, 12-13 Jun, 2013, pp. 79-82, ISBN 978-86-7892-512-2 Trifković B., Budak I., Vukelić Đ., Puškar T., Todorović A., Jevremović D., Hodolič J.: Pouzdanost stomatoloških CAD/CAM sistema za intraoralnu digitalizaciju, 7. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Fakultet tehničkih nauka, 12-13 Jun, 2013, pp. 55-58, ISBN 978-86-7892-512-2 Ilić Mićunović M., Budak I., Borzan M., Vukelić Đ., Medić V.: Emisija suspendovanih čvrstih čestica u radnoj sredini zubnih tehničara – zdravlje i bezbednost na radu, 8. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Fakultet tehničkih nauka, 19-20 Jun, 2014, pp. 183-186, ISBN 978-86-7892-616-7 Matin I., Hadžistević M., Hodolič J., Vukelić Đ., Puškar T., Potran M., Drstvenšek I.: Razvoj ekspertnog sistema za projektovanje simulacionog modela metalne substrukture za metalokeramičku krunicu, 8. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Fakultet tehničkih nauka, 19-20 Jun, 2014, pp. 109-114, ISBN 978-86-7892-616-7 Jevremović D., Trifković B., Sekulić S., Morisan-Basta I., Reljić A., Budak I., Vukelić Đ.: Primena različitih tehnoloških sistema za izradu bezmetalnih zubnih nadoknada, 8. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Fakultet tehničkih nauka, 19-20 Jun, 2014, pp. 99-102, ISBN 978-86-7892-616-7 Matin I., Hadžistević M., Hodolič J., Vukelić Đ., Trifković B., Potran M., Brajlih T.: Primena integrisanog sistema za precizno i brzo precizno livenje u stomatologiji, 39. JUPITER konferencija, Beograd: Mašinski fakultet, 28-29 Oktobar, 2014, pp. 91-95, ISBN 978-86-7083-838-3 Jevremović A., Jevremović D., Trifković B., Santoši Ž., Vukelić Đ.: Primena CAD/CAM tehnologije u projektovanju i izradi mostova pune anatomske forme na bazi cirkonijum-dioksida, 9. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Fakultet tehničkih nauka, 19-20 Jun, 2015, pp. 21-24, ISBN 978-86-7892-712-6 Matin I., Hadžistević M., Hodolič J., Vukelić Đ., Trifković B., Potran M., Drstvenšek I., Brajlih T.: Primena ekspertnog sistema za livenje u stomatologiji, 9. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Fakultet tehničkih nauka, 19-20 Jun, 2015, pp. 37-40, ISBN 978-86-7892-712-6 Ilić Mićunović M., Budak I., Kosec B., Vukelić Đ., Nagode A.: Ispitivanje čestica metodom analize slike prema ISO 13322, 9. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Fakultet tehničkih nauka, 19-20 Jun, 2015, pp. 129-132, ISBN 978-86-7892-712-6 Šimunović G., Svalina I., Havrlišan S., Šimunović K., Šarić T., Lujić R., Vukelić Đ.: Adaptivni neuro-fazi sistem za procenu brzine poliranja šavnih cevi, 10. International Scientific Conference ETIKUM, Novi Sad: Fakultet tehničkih nauka, 23-25 Jun, 2016, pp. 9-12, ISBN 978-86-7892-825-3 Matin I., Hadžistević M., Vukelić Đ., Medić V., Brajlih T., Drstvenšek I., Golebski R.: Primena numeričke simulacije injekcionog presovanja za proizvodnju medicinske opreme, 10. International Scientific Conference ETIKUM, Novi Sad: Fakultet tehničkih nauka, 23-25 Jun, 2016, pp. 53-56, ISBN 978-86-7892-825-3 Šimunović G., Svalina I., Vukelić Đ., Šimunović K., Šarić T., Kljajin M., Lujić R., Havrlišan S.: Procjenjivanje hrapavosti obrađene površine na temelju značajki digitalne fotografije, 11. International Scientific Conference ETIKUM, Novi Sad: Fakultet tehničkih nauka, 6-8 Decembar, 2017, pp. 101-104, ISBN 978-86-6022-00-68 Matin I., Vukelić Đ., Hadžistević M., Štrbac B., Potran M.: Unapređenje kvaliteta izrade metalne substrukture za metalokeramičku krunicu korišćenjem SOFTPREL-a, 11. International Scientific Conference ETIKUM, Novi Sad: Fakultet tehničkih nauka, 6-8 Decembar, 2017, pp. 149-152, ISBN 978-86-6022-00-68 Agarski B., Budak I., Ilić Mićunović M., Kosec B., Vukelić Đ.: Ocenjivanje životnog ciklusa zbornika radova ETIKUM konferencije, 11. International Scientific Conference ETIKUM, Novi Sad: Fakultet tehničkih nauka, 6-8 Decembar, 2017, pp. 205-208, ISBN 978-86-6022-00-68 Havrlišan S., Šimunivić K., Vukelić Đ., Šarić T., Šimunović G.: Istraživanje uticaja parametra naštrcavanja na tvrdoću prevlaka, 12. International Scientific Conference ETIKUM, Novi Sad: Fakultet tehničkih nauka, 6-8 Decembar, 2018, pp. 25-28, ISBN 978-86-6022-123-2 Matin I., Vukelić Đ., Hadžistević M., Štrbac B., Santoši Ž., Šokac M., Kulundžić N.: Računarom podržan integrisan pristup parametarskom projektovanju plastičnog proizvoda i alata, 12. International Scientific Conference ETIKUM, Novi Sad: Fakultet tehničkih nauka, 6-8 Decembar, 2018, pp. 69-72, ISBN 978-86-6022-123-2 Šokac M., Budak I., Jakovljević Ž., Santoši Ž., Vukelić Đ.: Pregled stanja i analiza najčešće primenjivanih metoda za segmentaciju slike, 12. International Scientific Conference ETIKUM, Novi Sad: Fakultet tehničkih nauka, 6-8 Decembar, 2018, pp. 81-84, ISBN 978-86-6022-123-2 Agarski B., Baloš S., Vukelić Đ., Hadžistević M., Trivković (Ristić) M., Pećanac M., Budak I.: Saradnja nauke i privrede kroz realizaciju inovacionih vaučera, 26. Trendovi razvoja - TREND, Kopaonik: Fakultet tehničkih nauka, Univerzitet u Novom Sadu, 16-19 Februar, 2020, pp. 332-335, ISBN 978-86-6022-241-3 Ilić Mićunović M., Agarski B., Budak I., Vukelić Đ.: Označavanje o zaštiti životne sredine proizvoda i usluga: implementacija u studijskim programima, 26. Trendovi razvoja - TREND, Kopaonik: Fakultet tehničkih nauka, Univerzitet u Novom Sadu, 16-19 Februar, 2020, pp. 278-281, ISBN 978-86-6022-241-3 Matin I., Štrbac B., Hadžistević M., Vukelić Đ.: The development of a knowledge-base library for plastic injection mold design using feature-based approach, 5. INTERNATIONAL SCIENTIFIC CONFERENCE- COMETa, Istočno Sarajevo: Faculty of Mechanical Engineering, 26-28 Novembar, 2020, pp. 358-364, ISBN 978-99976-719-8-1 Matin I., Štrbac B., Vukelić Đ., Kulundžić N., Hadžistević M.: The advanced mold design method, 13. International Scientific Conference ETIKUM, Novi Sad: Fakultet tehničkih nauka, 2-4 Decembar, 2021, pp. 143-146, ISBN 978-86-6022-387-8 Šokac M., Đurović Koprivica D., Kuzmanović M., Santoši Ž., Vukelić Đ., Radumilo D., Budak I.: Preliminarna studija određivanja pozicije baze implantata sa ciljem njihove analize i merenja, 13. International Scientific Conference ETIKUM, Novi Sad: Fakultet tehničkih nauka, 2-4 Decembar, 2021, pp. 189-192, ISBN 978-86-6022-387-8 Agarski B., Ilić Mićunović M., Budak I., Vukelić Đ.: Izbor odgovarajućih aktivnosti iz baze podataka kod analize inventara životnog ciklusa, 13. International Scientific Conference ETIKUM, Novi Sad: Fakultet tehničkih nauka, 2-4 Decembar, 2021, pp. 259-262, ISBN 978-86-6022-387-8 Jovičić G., Milošević A., Šokac M., Santoši Ž., Kočović V., Šimunović G., Vukelić Đ.: Evaluation of tool wear and surface roughness during dry turning of Inconel 601 with PVD and CVD inserts, 2. Konferencija sa međunarodnim učešćem "Napredne tehnologije u obrazovanju i privredi", Vrnjačka Banja: Visoka tehnička škola strukovnih studija, 30-31 Maj, 2023, pp. 1-8, ISBN 978-86-6211-145-6 Santoši Ž., Ranisavljev M., Šokac M., Vukelić Đ.: Analysis of the scanning spray layer thickness using the focus variation method, 39. International Conference of Production Engineering - ICPE-S, Novi Sad: Fakultet tehničkih nauka u Novom Sadu, 26-27 Oktobar, 2023, pp. 377-381, ISBN 978-86-6022-610-7 Jovičić G., Kanović Ž., Šokac M., Santoši Ž., Mitrović S., Šimunović G., Vukelić Đ.: Modelling of surface roughness and tool wear during the turning of inconel 601 alloy using artificial neural networks, 14. International Scientific Conference ETIKUM, Novi Sad: Faculty of Technical Sciences, 7-9 Decembar, 2023, pp. 29-32, ISBN 978-86-6022-618-3 Milošević A., Agarski B., Šokac M., Šimunović G., Kočović V., Vukelić Đ.: Implementation of life cycle assessment in the design process of fixture for reducer housing machining, 14. International Scientific Conference ETIKUM, Novi Sad: Faculty of Technical Sciences, 7-9 Decembar, 2023, pp. 85-88, ISBN 978-86-6022-618-3 Šokac M., Katić M., Milošević A., Ranisavljev M., Santoši Ž., Vukelić Đ.: Primena industrijskog CT-a kao alata za dimenzionalnu analizu i detekciju defekata kod odlivaka, 14. International Scientific Conference ETIKUM, Novi Sad: Fakultet tehničkih nauka, 7-9 Decembar, 2023, pp. 121-124, ISBN 978-86-6022-618-3 Ilić Mićunović M., Kuzmanović M., Budak I., Agarski B., Vukelić Đ.: Ispitivanje prisustva respiratornih aerosola prilikom stomatoloških intervencija, 14. International Scientific Conference ETIKUM, Novi Sad: Fakultet tehničkih nauka, 7-9 Decembar, 2023, pp. 145-148, ISBN 978-86-6022-618-3 Gvoić V., Agarski B., Kerkez Đ., Vukelić Đ., Prica M.: Ocenjivanje životnog ciklusa i ispitivanje uticaja sinteze heterogenog fenton katalizatora na životnu sredinu, 14. International Scientific Conference ETIKUM, Novi Sad: Fakultet tehničkih nauka, 7-9 Decembar, 2023, pp. 209-212, ISBN 978-86-6022-618-3 Matin I., Štrbac B., Ranisavljev M., Vukelić Đ., Hadžistević M.: THE ADVANCED SYSTEM FOR DETERMINING THE DEVIATION OF PLASTIC INJECTED MOLDED PARTS, 44. JUPITER konferencija, Beograd: UNIVERZITET U BEOGRADU - MAŠINSKI FAKULTET, 16-17 Oktobar, 2024, ISBN 978-86-6060-204-8	60	30.00
M64	Saopštenje sa skupa nacionalnog značaja štampano u izvodu Saopštenje sa skupa nacionalnog značaja štampano u izvodu Hodolič J., Hadžistević M., Budak I., Vukelić Đ., Agarski B.: Procena uticaja proizvodnih procesa na životnu sredinu ocenjivanjem životnog ciklusa sa ciljem unapređenja kvaliteta proizvoda i procesa, 7. InterRegioSci, Novi Sad: Pokrajinski sekretarijat za nauku i tehnološki razvoj, Vlada Autonomne Pokrajine Vojvodine, 8 Maj, 2014 Agarski B., Ilić Mićunović M., Budak I., Vukelić Đ., Hadžistević M., Hodolič J.: Višekriterijumsko vrednovanje ukupnog opterećenja životne sredine urbanog područja, 7. Simpozijum Hemija i zaštita životne sredine sa međunarodnim učešćem - EnviroChem, Palić: Srpsko hemijsko društvo, 9-12 Jun, 2015, pp. 77-78, ISBN 978-86-7132-058-0 Hodolič J., Hadžistević M., Budak I., Vukelić Đ., Agarski B.: Unapređenje kvaliteta proizvoda i procesa primenom metoda ocenjivanja životnog ciklusa i višekriterijumske analize, 8. InterRegioSci, Novi Sad: Autonomna pokrajina Vojvodina, Pokrajinski sekretarijat za nauku i tehnološki razvoja, 2015 Turk Sekulić M., Šolević Knudsen T., Bošković N., Vukelić Đ., Kožar Logar J., Radonić (Jakšić) J., Pap S.: Exploring new horizons and sustainable technologies for highly efficient wastewater remediation and decontamination: Multifunctional biochar, 8. Simpozijum „Hemija i zaštita životne sredine - EnviroChem“, Kruševac: Srpsko hemijsko društvo, 30-1 Maj, 2018, pp. 37-38, ISBN 978-86-7132-068-9 Agarski B., Maoduš N., Ubavin D., Jovanović S., Milošević A., Ilić Mićunović M., Vukelić Đ.: Life Cycle Assessment of Products Based on Environmental Product Declarations Data, 29. International Symposium on Analytical and Environmental Problems, Szeged: University of Szeged, H-6720 Szeged, Dugonics tér 13, Hungary, 13-14 Novembar, 2023, pp. 10-10, ISBN 978-963-306-963-9	5	1.00
M71	Odbranjena doktorska disertacija Odbranjena doktorska disertacija Vukelić Đ.: Razvoj sistema za projektovanje i optimizaciju konstrukcije pribora, Novi Sad, Fakultet tehničkih nauka u Novom Sadu, 2010	1	6.00
M72	Odbranjen magistarski rad Odbranjen magistarski rad Vukelić Đ.: Razvoj sistema za automatizovano projektovanje modularnih pribora, Novi Sad, Fakultet tehničkih nauka, 2005	1	3.00
M82	Nova proizvodna linija, novi materijal, industrijski prototip, Nova proizvodna linija, novi materijal, industrijski prototip, Budak I., Tadić B., Jeremić B., Vukelić Đ., Miljanić D., Todorović P., Hodolič J.: Industrijski prototip uređaja za ispitivanje statičke popustljivosti i nosivosti spoja elemenata za stezanje i radnog predmeta, 2012 Šokac M., Budak I., Jakovljević Ž., Vukelić Đ., Santoši Ž.: Programski sistem za segmentaciju snimaka generisanih primenom kompjuterizovane tomografije, 2020 Kočović V., Kostić S., Petrović A., Vukelić Đ., Tadić B.: Mala laboratorijska kidalica za ispitivanje mehaničkih karakteristika materijala zatezanjem, 2023 Kočović V., Kostić S., Bogdanović B., Petrović Savić S., Vukelić Đ., Tadić B.: Multifunkcionalni uređaj za merenje kinematskog koeficijenta trenja i ispitivanje procesa mikrorezanja, 2024 Kočović V., Milovanović V., Džunić D., Miljojković J., Brzaković Lj., Mitrović S., Vukelić Đ., Tadić B.: Uređaj za određivanje kinematskog koeficijenta trenja klizanja i trenja kotrljanja statički i dinamički opterećenih kontakata, 2024	5	30.00
M83	Novo laboratorijsko postrojenje, novo eksperimentalno postrojenje, novi tehnološki postupak Novo laboratorijsko postrojenje, novo eksperimentalno postrojenje, novi tehnološki postupak Tadić B., Babić M., Mitrović S., Lazić M., Vukelić Đ.: Univerzalni tribometar, 2010 Hodolič J., Tadić B., Vukelić Đ.: Novo eksperimentalno postrojenje za savijanje tankozidnih cevi primenom toplote generisane trenjem, 2011 Tadić B., Vukelić Đ., Todorović P., Jeremić B., Mačužić I., Bogdanović B.: Novo eksperimentalno postrojenje za određivanje dinamičke popustljivosti steznih i oslonih elemenata pribora, 2013	3	12.00
M84	Bitno poboljšan postojeći proizvod ili tehnologija Bitno poboljšan postojeći proizvod ili tehnologija Vukelić Đ., Tadić B., Hodolič J., Mitrović J., Simeunović N.: Specijalni modularni sistem steznih pribora za obradni centar HURCO-500, 2011 Ranđelović S., Vukelić Đ., Todorović P., Kočović V., Bogdanović B., Ivanović L., Tadić B.: Optimizacija procesa završne obrade kotrljanjem kuglice po površini predmeta obrade na osnovu dubine penetracije kuglice u materijal predmeta obrade, 2015 Tadić B., Ranđelović S., Todorović P., Vukelić Đ., Kočović V., Bogdanović B., Jeremić M.: Kruti alat namenjen za završnu obradu metala kotrljanjem kuglice, 2015	3	9.00
M85	Prototip, nova metoda, softver, standardizovan ili atestiran instrument, Prototip, nova metoda, softver, standardizovan ili atestiran instrument, Hodolič J., Perišić B., Ćosić I., Kovačević I., Katić V., Vukelić Đ., Bešić I.: Softver za podršku praćenju rezultata naučnog rada istraživača na teritoriji AP Vojvodina, 2007 Tadić B., Marjanović N., Vukelić Đ., Galović S.: Uređaj za ostvarivanje ekstremno visokih pritisaka, 2007 Matin I., Hadžistević M., Hodolič J., Vukelić Đ., Lukić D.: Razvoj programskog sistema za projektovanje alata za injekciono presovanje plastike, 2015 Santoši Ž., Budak I., Trifković B., Šokac M., Vukelić Đ., Hadžistević M., Hodolič J.: Nova metoda za akviziciju geometrijskih podataka u dentalnoj protetici na bazi blisko-predmetne fotogrametrije, 2015 Agarski B., Budak I., Srđević B., Vukelić Đ., Ilić Mićunović M., Hodolič J.: Programski sistem za inteligentnu višekriterijumsku analizu proizvoda i procesa, 2015 Vukelić Đ., Živković M., Miljojković J., Kočović V., Budak I.: Uređaj za ispitivanje apsorpcije vode drvenih radnih predmeta, 2017 Matin I., Vukelić Đ., Hadžistević M.: Softver za precizno livenje metalne substrukture za metalokeramičku krunicu (SOFTPREL), 2017	7	14.00
M86	Kritička evaluacija podataka, baza podataka, Kritička evaluacija podataka, baza podataka, Hodolič J., Ćosić I., Budak I., Matin I., Simeunović N., Hadžistević M., Vukelić Đ., Antić A., Bešić I.: Baza podataka sa softverskom aplikacijom kao podrška platformi za kontinualnu edukaciju FTN-a, 2010	1	2.00