Prezime:	Oros
Ime:	Ivana
APVNT broj:	3606
Organizacija:	Fakultet tehničkih nauka u Novom Sadu

Produkcija - zbirni rezultati
Oznaka	Naziv kriterijuma produkcije	Broj	Poena
		93	182.30
M13	Monografska studija/poglavlje u knjizi M11 ili rad u tematskom zborniku vodećeg međunarodnog značaja Monografska studija/poglavlje u knjizi M11 ili rad u tematskom zborniku vodećeg međunarodnog značaja Kiurski J., Oros I., Gvoić V.: Print and Related Industry Air Quality, Chapter 23 in in Comprehensive Analytical Chemistry Vol. 73 TheQuality of Air, Amsterdam, Elsevier, 2016, str. 623-654, ISBN 978-0-444-6360	1	6.00
M21	Rad u vrhunskom međunarodnom časopisu Rad u vrhunskom međunarodnom časopisu Kiurski J., Ranogajec J., Vučetić (Petrović) S., Zorić D., Adamović (Majkić) S., Oros I., Krstić J.: Fired clay with polymer addition as printing developer purifier, Applied Clay Science, 2012, Vol. 65, No. 65/66, pp. 48-52, ISSN 0169-1317 Kiurski J., Aksentijevic S., Oros I., Gvoić V., Kovačević I.: Multiple Regression Analysis as Indicator of Hazardous Organic Pollutants Interdependency in Pad Press Indoor Air, CLEAN - Soil Air Water, 2016, Vol. 44, No. 12, pp. 1605-1613, ISSN 1863-0650, UDK: DOI: 10.1002/clen.201400473	2	16.00
M21a	Rad u međunarodnom časopisu izuzetnih vrednosti Rad u međunarodnom časopisu izuzetnih vrednosti Kiurski J., Marić B., Adamović D., Mihailović A., Samardžić S., Oros I., Krstić J.: Register of hazardous materials in printing industry as a tool for sustainable development management, Renewable and Sustainable Energy Reviews, 2012, Vol. 16, No. 1, pp. 660-667, ISSN 1364-0321, UDK: doi:10.1016/j.rser.2011.08.030 Kiurski J., Marić B., Aksentijevic S., Oros I., Gvoić V., Kovačević I.: Indoor air quality investigation from screen printing industry, Renewable and Sustainable Energy Reviews, 2013, Vol. 28, pp. 224-231, ISSN 1364-0321, UDK: DOI: 10.1016/j.rser.2013.07.039 Kiurski J., Oros I., Ralević N., Stefanov J.: Statistical Methods as Indicator of Offset Printing Wastewater Quality, Stochastic Environmental Research and Risk Assessment, 2015, Vol. 29, No. 6, pp. 1709-1720, ISSN 1436-3240, UDK: DOI: 10.1007/s00477-014-1013-1 Kiurski J., Oros I., Gvoić V., Kovačević I., Aksentijević S.: The temporal variation of indoor pollutants in photocopying shop, Stochastic Environmental Research and Risk Assessment, 2016, Vol. 30, pp. 1289-1300, ISSN 1436-3240, UDK: DOI 10.1007/s00477-015-1107-4	4	40.00
M22	Rad u istaknutom međunarodnom časopisu Rad u istaknutom međunarodnom časopisu Mihailović A., Samardžić S., Kiurski J., Krstić J., Oros I., Kovačević I.: Occupational noise in printing companies, Environmental Monitoring and Assessment, 2011, Vol. 181, No. 1-4, pp. 111-122, ISSN 0167-6369, UDK: DOI: 10.1007/s10661-010-1817-5 Kiurski J., Adamović (Majkić) S., Oros I., Krstić J., Vojinović-Miloradov M.: The removal efficiency of heavy metals from spent printing developer, Carpathian Journal of Earth and Environmental Sciences, 2012, Vol. 7, No. 1, pp. 5-16, ISSN 1842-4090 Kiurski J., Adamović (Majkić) S., Oros I., Krstić J., Vojinović-Miloradov M.: The removal Efficiency of Heavy Metals from Spent Printing Developer, Carpathian Journal of Earth and Environmental Sciences, 2012, Vol. 7, No. 1, pp. 5-16, ISSN 1842-4090 Kiurski J., Oros I., Ralević N., Kovačević I., Adamović (Majkić) S., Krstić J., Čomić L.: Cluster and principal component analysis in the assessment of fountain solution quality, Carpathian Journal of Earth and Environmental Sciences, 2013, Vol. 8, No. 1, pp. 19-23, ISSN 1842-4090 Kiurski J., Marić B., Aksentijević S., Oros I., Gvoić V.: Occupational hazards in printing industry, International Journal of Environmental Science and Technology, 2016, Vol. 13, No. 3, pp. 955-972, ISSN 1735-1472, UDK: DOI 10.1007/s13762-016-0937-z	5	25.00
M23	Rad u međunarodnom časopisu Rad u međunarodnom časopisu Kiurski J., Adamović (Majkić) S., Oros I., Krstić J., Kovačević I.: Adsorption feasibility in the Cr(total) Ions Removal from Waste Printing Developer, Global Nest Journal, 2012, Vol. 14, No. 1, pp. 18-23, ISSN 1790-7632 Kiurski J., Ranogajec J., Oros I., Zorić D.: Fired clay, an effective natural adsorbent for printing developer purifying, Fresenius Environmental Bulletin, 2013, Vol. 22, No. 12c, pp. 3860-3864, ISSN 1018-4619 Kiurski J., Snežana A., Nedović Lj., Oros I., Čomić L.: The influence of printing microclimate parameters on isopropyl alcohol emission, Environmental Engineering and Management Journal, 2016, Vol. 15, No. 8, pp. 1705-1711, ISSN 1582-9596	3	9.00
M31	Predavanje po pozivu sa međunarodnog skupa štampano u celini Predavanje po pozivu sa međunarodnog skupa štampano u celini Kiurski J., Aksentijević S., Oros I., Gvoić V.: Indoor air emissions from photocopying, 7. 7th International Scientific Conference "Science and Higher Education in Function of Sustainable Development - SED 2014, Užice: VPTŠ Užice, 3-4 October, 2014, pp. 16-22, ISBN 978-86-83573-42-4	1	3.00
M32	Predavanje po pozivu sa međunarodnog skupa štampano u izvodu Predavanje po pozivu sa međunarodnog skupa štampano u izvodu Kiurski J., Vojinović-Miloradov M., Vidicki B., Krstić J., Oros I., Petrović (Đogo) M., Milovanović D.: Wastewater treatment in printing facilities, 7. The 7th IMT-GT UNINET and The 3rd Joint International PSU-UNS Conferences (BioScience for the future 2010), Hat-Yai: Prince of Songkla University, Thailand, 7-8 October, 2010, pp. 289-289	1	1.50
M33	Saopštenje sa međunarodnog skupa štampano u celini Saopštenje sa međunarodnog skupa štampano u celini Adamović D., Vojinović-Miloradov M., Kiurski J., Krstić J., Oros I., Petrović (Đogo) M.: Benzene in working environment, 1. The international conference Engineering of Environment Protection - TOP, Bratislava: Slovak University of Technology in Bratislava, 5-10 June, 2009, pp. 1-6, ISBN 978-80-227-3096-9 Kiurski J., Vojinović-Miloradov M., Krstić J., Oros I., Adamović D., Kovačević I.: Chemical treatment of wastewater in printing industry, 16. International symposium on analytical and environmental problems, Segedin: SZAB, 28 September, 2009, pp. 408-411, ISBN ISBN 978-963-482-975 Kiurski J., Oros I., Krstić J., Adamović (Majkić) S., Vojinović-Miloradov M., Mihailović A., Samardžić S.: The spectrochemical analysis of waste printing inks, 18. International Scientific and Professional Meeting Ecological Truth (EcoIst), Apatin: University of Belgrade - Technical Faculty Bor, 1-4 June, 2010, pp. 126-132, ISBN 978-86-80987-79-1 Samardžić S., Mihailović A., Kiurski J., Oros I., Krstić J., Kovačević I.: Frequency analysis at 1/1 octave bands for different types of printing machines, Zbornik radnika Proceedings, 2010, pp. 162-167, 18. International Scientific and Professional Meeting Ecological Truth (EcoIst), Apatin: University of Belgrade-Technical Faculty in Bor, 1-4 June, 2010, pp. 162-167, ISBN 978-86-80987-79-1 Kiurski J., Oros I., Krstić J., Petrović (Đogo) M., Milovanović D., Vojinović-Miloradov M., Turk Sekulić M., Vidicki B.: Treatment and reuse of fountain solution in offset printing, 10. The international conference Engineering of Environment Protection, Bratislava: Slovak University of Technology in Bratislava, 15-17 June, 2010, pp. 171-176, ISBN 978-80-970-438-0-3 Krstić J., Kiurski J., Oros I., Petrović (Đogo) M., Milovanović D., Vojinović-Miloradov M., Radonić (Jakšić) J.: Recycle and reuse possibility of waste printing inks, 10. The international conference Engineering of Environment Protection, Bratislava: Slovak University of Technology in Bratislava, 15-17 June, 2010, pp. 217-224, ISBN 978-80-970-438-0-3 Kiurski J., Krstić J., Oros I., Adamović (Majkić) S., Vojinović-Miloradov M.: Waste printing inks as a pollutant of graphic environment, 5. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: Fakultet tehničkih nauka, Novi Sad, 11-12 November, 2010, pp. 207-210, ISBN 978-86-7892-294-7 Mihailović A., Samardžić S., Kiurski J., Krstić J., Oros I.: Comparision of frequency characteristics for folders and cutters in printing companies, 5. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: Fakultet tehničkih nauka, Novi Sad, 11-12 November, 2010, pp. 219-222, ISBN 978-86-7892-294-7 Kiurski J., Obadović D., Cvetinov M., Adamović (Majkić) S., Oros I., Krstić J.: Absorption spectra as the indicator of fountain solution aging, 10. International Conference on Fundamental and Applied Aspects of Physical Chemistry, Beograd: Society of Physical Chemists of Serbia, 22 September, 2010, pp. 591-593, ISBN 978-86-82475-18-7 Kiurski J., Adamović (Majkić) S., Krstić J., Oros I., Kovačević I., Mihailović A., Samardžić S.: Removal of Cu(II) ion from waste printing developer, 19. International Scientific and Professional Meeting "ECOLOGICAL TRUTH" ECO-IST, Bor: University of Belgrade, technical Faculty Bor, 1-4 June, 2011, pp. 103-109, ISBN 978-86-80987-84-2 Mihailović A., Samardžić S., Kiurski J., Krstić J., Oros I., Kovačević I.: Characteristics of noise in printing facilities and its relevance to the workers health, 19. International Scientific and Professional Meeting "ECOLOGICAL TRUTH" ECO-IST, Bor: University of Belgrade, Technical Faculty Bor, 1-4 June, 2011, pp. 629-635, ISBN 978-86-80987-84-2 Kiurski J., Krstić J., Oros I., Adamović (Majkić) S., Turk Sekulić M., Mihailović A., Petrović (Đogo) M.: Emission reduction and economic effects of using eco-friendly chemicals in printing, 11. The international conference Engineering of Environment Protection, Bratislava: Slovak University of Technology in Bratislava, faculty of Mechanical Engineering, 14-16 June, 2011, pp. 143-148, ISBN 978-80.227-3519-3 Kiurski J., Adamović (Majkić) S., Oros I., Krstić J., Adamović D.: Formaldehyde in screen printing indoor, 17. Int. Symp. on Analytical and Environmental Problems, Szeged: SZAB Kémiai Szakbizottság Analitikai és Környezetvédelmi Munkabizottsága, 19 September, 2011, pp. 189-192, ISBN 978-963-315-066-5 Kiurski J., Petrović (Đogo) M., Turk Sekulić M., Adamović (Majkić) S., Oros I., Krstić J., Vojinović-Miloradov M.: Wastewater characterisation of screen printing, 17. Int. Symp. on Analytical and Environmental Problems, Szeged: SZAB Kémiai Szakbizottság Analitikai és Környezetvédelmi Munkabizottsága, 19 September, 2011, pp. 172-175, ISBN 978-963-315-066-5 Kiurski J., Oros I., Adamović (Majkić) S., Čomić L.: The composition of sheet-fed offset printing inks, 12. Eco-Ist’12, Zaječar: University of Belgrade, Technical Faculty in Bor, 30-2 May, 2012, pp. 200-205, ISBN 978-86-80987-98-9 Adamović D., Kiurski J., Adamović (Majkić) S., Oros I., Krstić J., Kovačević I.: Waste management Assessment in Screen Printing, 18. International Conference "Engineering for Environment Protection" – TOP, Bratislava: Slovak University of Technology in Bratislava, faculty of Mechanical Engineering, 26-28 June, 2012, pp. 7-12, ISBN 978-80-227-3723-4 Kiurski J., Obadović D., Krstić J., Oros I., Cvetinov M.: Absorption Characteristics of Yellow Sheet-fed offset printing Ink, 18. International Symposium on Analytical and Environmental Problems, with Special Emphasis on Heavy Metal Ions as Contaminants, Segedin: SZAB , 24 September, 2012, pp. 122-125, ISBN 978-963-306-165-7 Kiurski J., Obadović D., Cvetinov M., Krstić J., Oros I.: Absorption Characteristics of Cyan Dyes, 11. International Conference on Fundamental and Applied Aspects of Physical Chemistry, Beograd: Society of Physical Chemists of Serbia, 24-28 September, 2012, pp. 606-608, ISBN 978-86-82475-28-6 Krstić J., Kiurski J., Obadović D., Oros I., Cvetinov M.: Absorption Characteristics of Magenta Sheet-Fed Offset Printing Ink as an Indicator of Ink Pollution, 6. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: Faculty of Technical Sciences, 15-16 November, 2012, pp. 59-63, ISBN 978-86-7892-457-6 Kiurski J., Obadović D., Oros I., Cvetinov M.: Absorption spectra as the indicator of black ink aging during the sheet-fed offset press EMEC13, Moskow, 13. 13thEuropean Meeting on Environmental Chemistry (EMEC13), Moskva, 5-8 December, 2012, pp. 201-206 Đaković V., Anđelić G., Kiurski J., Oros I., Gvoić V.: Assesment Methods for Investment Projects in the Graphic Industry Sector: A Case Study of the Republic of Serbia, 6. PSU-UNS International Conference on Engineering and Technology - ICET, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, 15-17 May, 2013, pp. 1-4, ISBN 978-86-7892-510-8 Gvoić V., Aksentijevic S., Oros I., Kiurski J.: Indoor emission of prepress procesess, 15. Danube-Kris-Mures-Tisa (DKMT) Euroregion Conference on Environment and Health, Novi Sad: University of Novi Sad, Faculty of Technology, 16-17 May, 2013, pp. 181-186, ISBN 978-86-6253-019-6 Kiurski J., Oros I., Gvoić V., Vojinović-Miloradov M.: Identification of the main volatile hazards in pad press environments, 19. International Conference "Engineering for Environment Protection" – TOP, Časta-Papiernička: Slovak University of Technology in Bratislava, 11-13 June, 2013, pp. 133-137, ISBN 978-80227-3955-9 Kiurski J., Marić B., Ranogajec J., Oros I., Gvoić V.: The economic viability of clay in the adsorption separation of metal ions from waste printing developer, 21. The twentyfirst Annual International Conference on COMPOSITES/NANO ENGINEERING (ICCE - 21), Tenerife: International Community for Composties or Nano Engineering and University of La Laguna, Tenerife, Spain, 21-27 July, 2013, pp. 417-418 Kiurski J., Gvoić V., Oros I., Aksentijević S., Ralević N.: Indoor air quality in photocopying facility with statistical analysis, 19. International Symposium on Analytical and Environmental Problems, Szeged: SZAB, Szeged, Hungary , 23 September, 2013, pp. 161-164, ISBN 978-963-315-141-9 Kiurski J., Oros I., Gvoić V., Đaković V., Anđelić G.: The influence of water hardness on fountain solution quality, 19. International Symposium on Analytical and Environmental Problems, Szeged: SZAB, Szeged, Hungary , 23 September, 2013, pp. 165-168, ISBN 978-963-315-141-9 Kiurski J., Ranogajec J., Vučinić-Vasić M., Gvoić V., Oros I.: The efficiency of clayey pellets for Zn(II) ions removal from a waste printing developer, 12. 12th International Conference on Fundamental and Applied Aspects of Physical Chemistry, Physical Chemistry 2014, Beograd: Society of Physical Chemists of Serbia, 22-26 September, 2014, pp. 889-892, ISBN 978-86-82475-30-9 Kiurski J., Aksentijević S., Oros I., Gvoić V.: Mutual influence of the indoor pollutants during photocopying process, 12. 12th International Conference on Fundamental and Applied Aspects of Physical Chemistry, Physical Chemistry 2014, Beograd: Society of Physical Chemists of Serbia, 22-26 September, 2014, pp. 893-896, ISBN 978-86-82475-30-9 Kiurski J., Aksentijević S., Oros I., Gvoić V.: The influence of microclimates parameter on perchlorethylen during photocopying process, 20. 20th International Symposium on Analytical and Environmental Problems, Szeged: SZAB, Szeged, Hungary , 22 September, 2014, pp. 47-50, ISBN 978-963-12-1161-0 Kiurski J., Ranogajec J., Gvoić V., Oros I.: The feasibility of clayey adsorpbent for copper ion removal from waste printing developer, 20. 20th International Symposium on Analytical and Environmental Problems, Szeged: SZAB, Szeged, Hungary , 22 September, 2014, pp. 43-46 Kiurski J., Ranogajec J., Gvoić V., Rudić O., Oros I.: Adsorption capacity of clayey pellets as the function of the particle size distribution, 1. International Conference on Engineering and Applied Sciences Optimization, Kos: National Technical University of Athens (NTUA), Greece, 4-6 June, 2014, pp. 2907-2917, ISBN 978-960-99994-6 Kiurski J., Ranogajec J., Gvoić V., Oros I.: Unfired Clayey Pellets as the Adsorbents for Metal Ions Removal from a Waste Printing Developer, 21. Symposium on Analytical and Environmental Problems, Szeged: SZAB, Szeged, Hungary, 28 September, 2015, pp. 205-208, ISBN 978-963-306-411-5 Kiurski J., Oros I., Gvoić V., Aksentijevic S.: Statistical Interpretation of Carbon Dioxide Emission in the Photocopying Process, 21. Symposium on Analytical and Environmental Problems, Szeged: SZAB, Szeged, Hungary, 28 September, 2015, pp. 209-212, ISBN 978-963-306-411-5 Aksentijevic S., Kiurski J., Gvoić V., Oros I.: Cadmium in Industrial Wastewater, 21. Symposium on Analytical and Environmental Problems, Szeged: SZAB, Szeged, Hungary, 28 September, 2015, pp. 213-216, ISBN 978-963-306-411-5 Kiurski J., Aksentijevic S., Oros I., Gvoić V.: Application of two-way Anova on carbon monoxide emission during photocopying process, 8. International Conference Science and higher education in function of sustainable developement, Užice: VPTŠ, Užice, 2-3 October, 2015, pp. 1-6	35	35.00
M34	Saopštenje sa međunarodnog skupa štampano u izvodu Saopštenje sa međunarodnog skupa štampano u izvodu Kiurski J., Vojinović-Miloradov M., Krstić J., Oros I., Adamović D.: Detection and Influence of Formaldehyde in the Graphic Environment , 2. Symposium of Chemistry and Environment, Bar: Chemical Society of Montenegro, 16-19 September, 2009, pp. 124-124 Kiurski J., Prica M., Adamović (Majkić) S., Oros I., Krstić J.: The possibility of metal removal from used printing developer by natural zeolite and activated carbon, 20. Annual Meeting of the Society Of Enviromental Toxicology and Chemistry (SETAC), Seville: SETAC Europe, 23-27 May, 2010, pp. 248-248 Kiurski J., Adamović D., Krstić J., Oros I., Adamović (Majkić) S., Mihailović A., Samardžić S.: The influence of formaldehyde on printing indoor, 12. Danube-Kris-Mures-Tisa Euroregion Conference on Food, Environment and Health, Novi Sad: Tehnološki fakultet Novi Sad, 14-15 September, 2010, pp. 69-69, ISBN 978-86-80995-84-7 Kiurski J., Adamović (Majkić) S., Oros I., Krstić J., Samardžić S., Mihailović A.: Removal efficiency of Zn(II) ions from waste printing developer, 7. Aegean Analytical Chemistry Days (AACD), Mytilene: The Association of Greek Chemists ( North Aegean Branch), 29-3 September, 2010, pp. 249-249 Kiurski J., Mihailović A., Samardžić S., Krstić J., Oros I.: An overview of noise levels in printing companies in Novi Sad, 11. International Symposium of Interdisciplinary Regional Research (ISIRR), Szeged: The Regional Committee of the Hungarian Academy of Sciences at Szeged (SZAB), 13-15 October, 2010, pp. 157-157, ISBN 978-963-508-600-9 Kiurski J., Adamović D., Oros I., Krstić J., Adamović (Majkić) S.: Ozone and volatile organic compounds as prominent pollutants of printing indoor, 21. SETAC Europe 21st Annual Meeting, Milano: Society of Environmental Toxicology and Chemistry Europe, 15-19 May, 2011, pp. 257-257 Kiurski J., Ranogajec J., Pašalić S., Vučetić (Petrović) S., Zorić D., Oros I., Adamović (Majkić) S.: Clay Derıvatıve Materıals wıth Polymer Addıtıon as Adsorbent for Zn(Iı) Ion Removal from Prıntıng Developer, 2. EUROCLAY 2011 Clay science at the crossroad of civilizations, Antalya: European clays groups association & Turkish national committee on clay science, 26-1 June, 2011, pp. 266-267 Kiurski J., Ranogajec J., Zorić D., Adamović (Majkić) S., Oros I., Krstić J.: A Modified Clay Material as Cost-Effective Sorbent for Waste Printing Developer Decontamination, 6. SETAC World Congress, SETAC Europe 22nd Annual Meeting, Berlin: SETAC Europe, 20-24 May, 2012, pp. 295-296 Kiurski J., Obadović D., Oros I., Cvetinov M.: Absorption spectra as the indicator of black ink aging during the sheet-fed offset press, 13. European Meeting on Environmental Chemistry, Moskva: Russian Society for Mass Spectrometry , 5-8 December, 2012, pp. 112-112, ISBN 978-5-89513-295-1 Kiurski J., Oros I., Ranogajec J., Gvoić V.: Novel adsorbent applicability for decontamination of printing wastewater, 1. European Geosciences Union General Assembly 2013, Vienna: European Geosciences Union, 7-12 April, 2013 Kiurski J., Gvoić V., Oros I., Anđelić G., Đaković V.: Pollutants emission during the printing on collagen casings for meat products, 8. 8th International Conference of the Chemical Societies of the South-East European Countries, ICOSECS 8, Beograd: Serbian Chemical Society, 27-29 June, 2013, pp. 249-249, ISBN 978-86-7132-053-5 Oros I., Kiurski J., Gvoić V., Obadović D.: Correlation between internal structure and spectral behavior of carbon black as indicator of ink aging process , 20. 20th International Conference on Environmental Indicators, ICEI 2013, Trier: Trier University, Germany, 16-19 September, 2013, pp. 86-86 Kiurski J., Ranogajec J., Oros I., Gvoić V.: COPPER ION ADSORPTION IN WASTE PRINTING DEVELOPER BY CLAY MATERIALS, 1. International Scientific Conference "Sustainable Solutions to Wastewater Management" (WASTEnet), Kavala: WASTEnet Project, co-funded by EU and National Funds, 19-21 June, 2015, pp. 16-16	13	6.50
M51	Rad u vodećem časopisu nacionalnog značaja Rad u vodećem časopisu nacionalnog značaja Kiurski J., Adamović D., Oros I., Krstić J., Adamović (Majkić) S., Vojinović-Miloradov M., Kovačević I.: Correlation between Ozone and Total VOCs in Printing Environment, Journal of Chemistry and Chemical Engineering, 2011, Vol. 5, No. 5, pp. 423-428, ISSN 1934-7375 Kiurski J., Adamović (Majkić) S., Oros I., Krstić J., Petrović (Đogo) M.: Detection and Quantification of Ozone in Screen Printing Facilities, Proceedings of World Academy of Science, Engineering and Technology, 2011, Vol. 7, No. 75, pp. 923-928, ISSN 1307-6884 Kiurski J., Adamović (Majkić) S., Krstić J., Oros I., Vojinović-Miloradov M.: Adsorption efficiency of low-cost materials in the removal of Zn(II) ions from printing developer, Acta Technica Corviniensis, 2011, Vol. 4, pp. 61-66, ISSN 2067-3809 Kiurski J., Nedović Lj., Adamović (Majkić) S., Oros I., Krstić J., Čomić L.: Formaldehyde as Screen Printing Indoor Pollutant, International Journal of Structural and Civil Engineering, 2012, Vol. 1, No. 2, pp. 18-25, ISSN 2277-7032 Kiurski J., Nedović Lj., Adamović (Majkić) S., Oros I., Krstić J., Kovačević I., Čomić L.: Nonlinear Correlation Model in the Assessment of Screen Printing Indoor Pollution, American Journal of Environmental Engineering, 2012, Vol. 2, No. 2, pp. 35-38, ISSN 2166-465X Kiurski J., Oros I., Ralević N., Kovačević I., Adamović (Majkić) S., Krstić J., Nedović Lj.: Multivariate Statistical Interpretation of Fountain Solutions as Indicator of Environmental Pollution, Journal of Environmental Indicators, 2012, Vol. 7, pp. 11-19 Kiurski J., Aksentijevic S., Oros I., Gvoić V., Petrović (Đogo) M.: Ketones emission during pad printing process, Proceedings of World Academy of Science, Engineering and Technology, 2014, Vol. 8, No. 5, pp. 1034-1037, ISSN 1307-6884 Kiurski J., Oros I., Gvoić V., Kovačević I., Aksentijević S.: The Statistical Significant of Adsorbents for Effective Zn(II) Ions Removal, Proceedings of World Academy of Science, Engineering and Technology, 2014, Vol. 8, No. 7, pp. 937-939, ISSN 1307-6884 Kiurski J., Gvoić V., Oros I., Ranogajec J.: Ammonia release during photocopying operations, Proceedings of World Academy of Science, Engineering and Technology, 2014, Vol. 8, No. 4, pp. 692-696, ISSN 1307-6884 Kiurski J., Ranogajec J., Oros I., Gvoić V.: The Influence of Clayey Pellet Size on Adsorption Efficiency of Metal Ions Removal from Waste Printing Developer, Proceedings of World Academy of Science, Engineering and Technology, 2015, Vol. 13, No. 3, pp. 12-15, ISSN 1307-6884 Kiurski J., Aksentijević S., Gvoić V., Oros I.: Non-Methane Hydrocarbons Emission During The Photocopying Process, Proceedings of World Academy of Science, Engineering and Technology, 2015, Vol. 17, No. 5, pp. 470-473, ISSN 1307-6884 Kiurski J., Ranogajec J., Gvoić V., Oros I.: The Purification of Waste Printing Developer with the Fixed Bed Adsorption Column, Proceedings of World Academy of Science, Engineering and Technology, 2016, Vol. 18, No. 1-XII, pp. 1949-1952, ISSN 1307-6884 Kiurski J., Gvoić V., Oros I.: Statistically Significant Differences of Carbon Dioxide and Carbon Monoxide Emission in Photocopying Process, WASET International Journal of Social Sciences, 2016, Vol. 18, No. 3, pp. 2277-2281, ISSN 1306-973X	13	26.00
M53	Rad u naučnom časopisu Rad u naučnom časopisu Kiurski J., Oros I.: The influence of pH/conductivity of fountain solution on dot circularity, line and text raggedness, Journal of Graphic Engineering and Design, 2012, Vol. 3, No. 2, pp. 1-7, ISSN 2217-379X Tijana K., Oros I., Kiurski J.: Prečišćavanje otpadnog razvijača bentonitom, Zbornik radova Fakulteta tehničkih nauka, 2012, No. 16, pp. 3531-3534, ISSN 0350-428X Oros I.: The influence of physico-chemical parameters of fountain solution on print quality, International Journal of Modern Engineering Research, 2012, Vol. 2, No. 5, pp. 3585-3593, ISSN 2249-6645 Kiurski J., Marić B., Đaković V., Adamović (Majkić) S., Oros I., Krstić J.: The Impact Factors of the Enviromental Pollution and Workers Health in Printing Industry, Proceedings of World Academy of Science, Engineering and Technology, 2012, No. 61, pp. 897-900, ISSN 1307-6884 Đorđević A., Oros I., Kiurski J.: Apsorpcione karakteristike magenta boje, Zbornik radova Fakulteta tehničkih nauka, 2013, Vol. 28, No. 2, pp. 167-169, ISSN 0350-428X	5	5.00
M63	Saopštenje sa skupa nacionalnog značaja štampano u celini Saopštenje sa skupa nacionalnog značaja štampano u celini Oros I., Kiurski J., Vojinović-Miloradov M., Prica M., Fišl J.: Upravljanje otpadom ofset stampe , 4. Naučno - stručni simpozijum GRID, Novi Sad: Fakultet tehnickih nauka, Novi Sad, 13-14 Novembar, 2008, pp. 275-280, ISBN 978-86-7892-145-2 Oros I., Krstić J., Kiurski J., Vojinović-Miloradov M., Adamović D.: Reciklaza sredstava za vlazenje u procesu ofset stampe , 1. Naučno-stručni skup Ecoist ’09, Kladovo: Univerzitet u Beogradu - Tehnicki fakultet u Boru, 31-2 Maj, 2009, pp. 112-116, ISBN 978-86-80987-69-9 Krstić J., Oros I., Kiurski J., Vojinović-Miloradov M., Adamović D.: Mogucnosti iskoriscenja otpadnih stamparskih boja , 1. Naučno-stručni skup "Zaštita i zdravlje na radu i zaštita životne sredine", Banja Luka: Institut zastite, ekologije i informatike, naucnoistrazivacki institut, 24-26 Jun, 2009, pp. 825-830, ISBN 978-99938-846-2-0 Kiurski J., Adamović (Majkić) S., Oros I., Adamović D., Krstić J.: Total VOCs emissions from screen printing, 50. 50. Jubilarno savetovanje Srpskog hemijskog društva, Beograd: Srpsko hemijsko društvo, 14-15 Jun, 2012, pp. 116-119, ISBN 978-86-7132-049-8 Kiurski J., Gvoić V., Oros I.: The statistically significant differences of NO2 emissions in the photocopying environment, 52. Meeting of the Serbian Chemical Society, Novi Sad: Serbian Chemical Society, 29-30 Maj, 2015, pp. 67-70	5	2.50
M64	Saopštenje sa skupa nacionalnog značaja štampano u izvodu Saopštenje sa skupa nacionalnog značaja štampano u izvodu Kiurski J., Oros I., Gvoić V., Vojinović-Miloradov M., Aksenitijević S.: Isopropyl alcohol in mnual screen printing environment, 6. 6. simpozijum Hemija i zaštita životne sredine EnviroChem 2013, sa međunarodnim učešćem, Vršac: Srpsko hemijsko društvo, 21-24 Maj, 2013, pp. 354-355, ISBN 978-86-7132-052-8 Kiurski J., Oros I., Gvoić V., Aksentijevic S.: Nitrogen dioxide emission in photocopying process, 7. Simpozijum Hemija i zaštita životne sredine, Palić: Serbian Chemical Society, 9-12 Jun, 2015, pp. 290-291, ISBN 978-86-7132-058-0 Kiurski J., Ranogajec J., Gvoić V., Oros I.: Prediction of optimal adsorption isotherm parameters by using nonlinear model approach, 7. Simpozijum Hemija i zaštita životne sredine, Palić: Serbian Chemical Society, 9-12 Jun, 2015, pp. 385-386, ISBN 978-86-7132-058-0 Aksentijevic S., Kiurski J., Gvoić V., Oros I.: Ispitivanje pH zemljišta, 7. Simpozijum Hemija i zaštita životne sredine, Palić: Serbian Chemical Society, 9-12 Jun, 2015, pp. 160-161, ISBN 978-86-7132-058-0	4	0.80
M71	Odbranjena doktorska disertacija Odbranjena doktorska disertacija Oros I.: Indikatori starenja sredstva za vlaženje u ofset štampi, Novi Sad, Fakultet tehničkih nauka, Univerzitet u Novom Sadu, 2015, str. 1-144	1	6.00