Prezime:	Stojanović
Ime:	Goran
APVNT broj:	342
Organizacija:	Fakultet tehničkih nauka u Novom Sadu

Produkcija - zbirni rezultati
Oznaka	Naziv kriterijuma produkcije	Broj	Poena
		351	1240.40
M13	Monografska studija/poglavlje u knjizi M11 ili rad u tematskom zborniku vodećeg međunarodnog značaja Monografska studija/poglavlje u knjizi M11 ili rad u tematskom zborniku vodećeg međunarodnog značaja Cvejić Ž., Srdić V., Milanović M., Stojanović G., Rakić S.: Metal Oxides Structure, Crystal Chemistry and Magnetic Properties , V.V. Srdic, Z. Cvejic, M. Milanovic, G. Stojanovic, S. Rakic, in Part II: Magnetic and Multiferroic Metal Oxides, in book Magnetic, Ferroelectric, and Multiferroic Metal Oxides, Published by Elsevier (2018), ISBN 9780128111802, Elsevier, 2018, ISBN 9780128111802	1	6.00
M21	Rad u vrhunskom međunarodnom časopisu Rad u vrhunskom međunarodnom časopisu Stojanović G., Damnjanović M., Desnica V., Živanov Lj., Raghavendra R., Bellew P., Mcloughlin N.: High performance zig-zag and meander inductors embedded in ferrite material , Journal of Magnetism and Magnetic Materials, 2006, Vol. 297, No. 2, pp. 76-83, ISSN 0304-8853, UDK: 10.1016/j.jmmm.2005.02.058 Stojanović G., Savić S., Živanov Lj.: Important Role of the Hall Effect Measurement System in a Modified Course of Materials in Electrical Engineering, IEEE Transactions on Education, 2009, Vol. 52, No. 3, pp. 297-304, ISSN 0018-9359, UDK: 10.1109/TE.2008.928206 Stojanović G., Radovanović M., Malešev M., Radonjanin V.: Monitoring of Water Content in Building Materials Using a Wireless Passive Sensor, Sensors, 2010, Vol. 10, No. 5, pp. 4270-4280, ISSN 1424-8220, UDK: 10.3390/s100504270 Milanović M., Stojanović G., Nikolić Lj., Radovanović M., Škorić B., Miletić A.: Electrical and structural characterisation of nanostructured titania coatings deposited on interdigitated electrode system, Materials Chemistry and Physics, 2011, Vol. 130, No. 1-2, pp. 769-774, ISSN 0254-0584, UDK: 10.1016/j.matchemphys.2011.07.061 Savić S., Mančič L., Mančić L., Vojisavljević K., Stojanović G., Branković Z., Aleksić O., Branković G.: Microstructural and electrical changes in nickel manganite powder induced by mechanical activation, Materials Research Bulletin, 2011, Vol. 46, No. 7, pp. 1065-1071, ISSN 0025-5408, UDK: 10.1016/j.materresbull.2011.03.008 Maksimović M., Stojanović G., Radovanović M., Malešev M., Radonjanin V., Radosavljević G., Smetana W.: Application of a LTCC sensor for measuring moisture content of building materials, Construction and Building Materials, 2012, Vol. 26, No. 1, pp. 327-333, ISSN 0950-0618(02)00045-4, UDK: 10.1016/j.conbuildmat.2011.06.029 Jeranče N., Vasiljević D., Samardžić N., Stojanović G.: A Compact Inductive Position Sensor Made by Inkjet Printing Technology on a Flexible Substrate, Sensors, 2012, Vol. 12, pp. 1288-1298, ISSN 1424-8220, UDK: 10.3390/s120201288 Jeranče N., Bednar N., Stojanović G.: An Ink-Jet Printed Eddy Current Position Sensor, Sensors, 2013, Vol. 13, pp. 5205-5219, ISSN 1424-8220, UDK: 10.3390/s130405205 Vučinić-Vasić M., Božin E., Bessais L., Stojanović G., Kozmidis-Luburić U., Abeykoon J., Bostjan M., Kremenović A., Antić B.: Thermal Evolution of Cation Distribution/Crystallite Size and Their Correlation with the Magnetic State of Yb-Substituted Zinc Ferrite Nanoparticles, Journal of Physical Chemistry. Part C, 2013, Vol. 117, No. 23, pp. 2358-2365, ISSN 1932-7447 Menićanin A., Živanov Lj., Stojanović G., Samardžić N., Radjelović D.: Transport parameters of inkjet printed nanoparticle silver on polyimide substrate measured at room and liquid nitrogen temperatures, IEEE Transactions on Electron Devices, 2013, Vol. 60, No. 9, pp. 2963-2967, ISSN 0018-9383 Cvejin K., Cvejin K., Mojić B., Mojić B., Samardžić N., Srdić V., Srdić V., Stojanović G., Stojanović G.: Dielectric studies of barium bismuth titanate as a material for application in temperature sensors, Journal of Materials Science: Materials in Electronics, 2013, Vol. 24, No. 4, pp. 1243-1249, ISSN 0957-4522 Stojanović G., Mandić V., Ćurčić M., Vasiljević D., Kisić M., Radosavljević N.: Combining rapid prototyping techniques in mechanical engineering and electronics for realization of a variable capacitor, Rapid Prototyping Journal, 2014, Vol. 20, No. 2, pp. 115-120, ISSN 1355-2546 Vučinić-Vasić M., Boskovic M., Antić A., Stojanović G., Radovanović M., Fabian M., Jovalekić Č., Pavlović M., Antić B.: Temperature induced evolution of structure/microstructure parameters and their correlations with electric/magnetic properties of nanocrystalline Nickel ferrite, Ceramics International, 2014, Vol. 40, No. 3, pp. 4521-4527, ISSN 0272-8842 Samardžić N., Mionić M., Dakić B., Hofmann H., Dautović S., Stojanović G.: Analysis of Quantized Electrical Characteristics of Microscale TiO2 Ink-jet Printed Memristor, IEEE Transactions on Electron Devices, 2015, ISSN 0018-9383, UDK: 10.1109/TED.2015.2421283 Manjakkal L., Cvejin K., Kulawik J., Zaraska K., Szwagierczak D., Stojanović G.: Sensing mechanism of RuO2–SnO2 thick film pH sensors studied by potentiometric method and electrochemical impedance spectroscopy, Journal of Electroanalytical Chemistry, 2015, Vol. 759, pp. 82-90, ISSN 1572-6657 Radovanović M., Mojić B., Cvejin K., Srdić V., Stojanović G.: A Wireless LC Sensor Coated with Ba0.9Bi0.066TiO3 for Measuring Temperature, Sensors, 2015, Vol. 15, pp. 11454-11464, ISSN 1424-8220 Tripković Đ., Vukmirović J., Bajac B., Samardžić N., Đurđić E., Stojanović G., Srdić V.: Inkjet patterning of in situ sol–gel derived barium titanate thin films, Ceramics International, 2016, Vol. 42, pp. 1840-1846, ISSN 0272-8842 Simic M., Manjakkal L., Zaraska K., Stojanović G., Ravinder D.: TiO2-Based Thick Film pH Sensor, IEEE Sensors Journal, 2017, Vol. 17, No. 2, pp. 248-255, ISSN 1530-437X Mooranian A., Zamani ., Mikov M., Goločorbin-Kon S., Stojanović G., Arfuso F., Al-Salami .: Novel nano-encapsulation of probucol in microgels: scanning electron micrograph characterizations, buoyancy profiling, and antioxidant assay analyses , Artificial Cells Nanomedicine and Biotechnology, 2018, pp. 1-7, ISSN 2169-1401 Vasiljević D., Mansouri A., Anzi L., Sordan R., Stojanović G.: Performance Analysis of Flexible Ink-jet Printed Humidity Sensors Based on Graphene Oxide, IEEE Sensors Journal, 2018, Vol. 18, No. 11, pp. 4378-4383, ISSN 1530-437X Marković M., Bajić J., Batilović M., Sušić Z., Joža A., Stojanović G.: Comparative Analysis of Deformation Determination by Applying Fiber-optic 2D Deflection Sensors and Geodetic Measurements, Sensors, 2019, Vol. 19, No. 4, ISSN 1424-8220 Kojić S., Stojanović G., Radonić V.: Novel Cost-Effective Microfluidic Chip Based on Hybrid Fabrication and Its Comprehensive Characterization, Sensors, 2019, Vol. 19, No. 7, pp. 1-18, ISSN 1424-8220 Stojanović G., Kojić T., Radovanović M., Vasiljević D., Panić (Ratković) S., Srdić V., Cvejić J.: Flexible sensors based on two conductive electrodes and MWCNTs coating for efficient pH value measurement, Journal of Alloys and Compounds, 2019, Vol. 794, pp. 76-83, ISSN 0925-8388 Jovanović N., Petrović B., Kojić S., Šipovac M., Marković D., Stefanović S., Stojanović G.: Primary Teeth Bite Marks Analysis on Various Materials: A Possible Tool in Children Health Risk Analysis and Safety Assessment, International Journal of Environmental Research and Public Health, 2019, Vol. 16, No. 13, pp. 1-12, ISSN 1660-4601 Mooranian A., Raj Wagle S., Kovacevic B., Takechi R., Mamo J., Lam V., Watts G., Mikov M., Goločorbin-Kon S., Stojanović G., Al-Sallami H., Al-Salami H.: Bile acid bio-nanoencapsulation improved drug targeted-delivery and pharmacological effects via cellular flux: 6-months diabetes preclinical study, Scientific Reports, 2020, Vol. 10, No. 1, pp. 106-121, ISSN 2045-2322 Mooranian A., Zamani N., Mikov M., Goločorbin-Kon S., Stojanović G., Arfuso F., Kovacevic B., Al-Salami H.: A second-generation micro/nano capsules of an endogenous primary un-metabolised bile acid, stabilized by Eudragit-alginate complex with antioxidant compounds, Saudi Pharmaceutical Journal, 2020, Vol. 28, No. 2, pp. 165-171, ISSN 1319-0164 Stojanović G., Nikodinović-Runić J., Švenderman S., Kojić T., Radovanović M., Mikov M., Ranđelović D.: Comprehensive characterization of elastomeric polyhydroxyalkanoate and its sensor applications, Materials Science & Engineering C, 2020, Vol. 115, No. 111091, ISSN 0928-4931 Wagle S., Kovačević B., Walker D., Ionescu C., Jones M., Stojanović G., Kojić S., Mooranian A., Al-Salami H.: Pharmacological and Advanced Cell Respiration Effects, Enhanced by Toxic Human-Bile Nano-Pharmaceuticals of Probucol Cell-Targeting Formulations, Pharmaceutics, 2020, Vol. 12, No. 8, pp. 1-17, ISSN 1999-4923 Simić M., Kojić T., Radovanović M., Stojanović G., Hani A.: Impedance Spectroscopic Analysis of the Interidigitated Flexible Sensor for Bacteria Detection, IEEE Sensors Journal, 2020, Vol. 20, No. 21, pp. 12791-12798, ISSN 1530-437X Chandran A., Simić M., Chandran Mukkattu Kuniyil A., Zavašnik J., Cvejić Ž., Zavašnik J., Cvejić Ž., Sarang S., Sarang S., Simić M., Srdić V., Stojanović G.: Performances and biosensing mechanisms of interdigitated capacitive sensors based on the hetero-mixture of SnO2 and In2O3, Sensors, 2020, Vol. 20, No. 6323, pp. 1-13, ISSN 1424-8220 Radovanović M., Ilić M., Pastor K., Ačanski M., Panić (Ratković) S., Srdić V., Randjelović D., Stojanović G.: Rapid detection of olive oil blends using a paper-based portable microfluidic platform, Food Control, 2021, No. 107888, ISSN 0956-7135 Prodanović R., Sarang S., Rančić D., Vulić I., Stojanović G., Stankovski S., Ostojić G., Baranovski I., Maksović D.: Trustworthy Wireless Sensor Networks for MonitoringHumidity and Moisture Environments (https://doi.org/10.3390/s21113636), Sensors, 2021, Vol. 21, No. 3636, pp. 1-24, ISSN 1424-8220 E. Ali A., Jeoti V., Stojanović G.: Fabric based printed - distributed battery for electronic textiles and wearables: A review, Science and Technology of Advanced Materials, 2021, No. 2, ISSN 1468-6996 Mooranian A., Ionescu C., Wagle S., Kovacevic B., Walker D., Jones M., Chester J., Foster T., Johnston E., Kojić S., Stojanović G., Mikov M., Al-Salami H.: Polyelectrolytes Formulated with Primary Unconjugated Bile Acid Optimised Pharmacology of Bio-Engineered Implant, Pharmaceutics, 2021, Vol. 13, No. 10, pp. 1-16, ISSN 1999-4923 Hanif M., Jeoti V., Radzi Ahmad M., Zubair Aslam M., Qureshi S., Stojanović G.: FEM analysis of various multilayer structures for CMOS compatible wearable acousto-optic devices, Sensors, 2021, Vol. 21, No. 7863, pp. 1-14, ISSN 1424-8220 Simić M., Stavrakis A., Stojanović G.: Low-complexity Method for Parameter Estimation of the Simplified Randles Circuit with Experimental Verification, IEEE Sensors Journal, 2021, ISSN 1530-437X Qureshi S., Stojanović G., Simić M., Jeoti V., Varun J., Lashari N., Najeebullah L., Farooq S., Sher F.: Silver Conductive Threads-Based Embroidered Electrodes on Textiles as Moisture Sensors for Fluid Detection in Biomedical Applications, Materials, 2021, Vol. 14, No. 24, pp. 7813-7834, ISSN 1996-1944 Stojanović G., Kojić T., Simić M., Jovanović Galović A., Pavlović B., Zurutuza A., Anzi L., Šordan R.: Rapid selective detection of ascorbic acid using graphene based microfluidic platform, IEEE Sensors Journal, 2021, Vol. 21, No. 15, pp. 16744-16753, ISSN 1530-437X Ankita S., Adrian S., Simić M., Kojić S., Stojanović G.: Gold Leaf-Based Microfluidic Platform for Detection of Essential Oils Using Impedance Spectroscopy, Biosensors, 2022, Vol. 12, No. 12, pp. 1-12, ISSN 2079-6374 Milić L., Movrin D., Simić M., Jeoti V., Stojanović G.: Investigation of electrical performances of textile conductive lines under different connector configurations and external influences, Textile Research Journal, 2022, Vol. 93, No. 11-12, pp. 2576-2589, ISSN 0040-5175 Mooranian A., Mihaela Ionescu C., Raj Wagle S., Kovacevic B., Walker D., Jones M., Chester J., Foster T., Johnston E., Kojić S., Stojanović G., Mikov M., Al-Salami H.: Taurine grafted islets improved drug-pharmacology without direct dependency between interleukin-6 and lithocholic acid in plasma, Biomedicines, 2022, Vol. 10, No. 1, pp. 111-126, ISSN 2227-9059 Aan Nazmus S., Drieberg M., Sarang S., Aziz A., Hang N., Stojanović G.: Energy-Aware QoS MAC Protocol Based on Prioritized-Data and Multi-Hop Routing for Wireless Sensor Networks, Sensors, 2022, Vol. 2022, No. 22, pp. 2598-2623, ISSN 1424-8220 Umar Aslam Khan M., Izwan Abd Razak S., Hassan A., Qureshi S., Stojanović G., ul-Haq I.: Multifunctional ARX-f-GO based composite hydrogels for wound healing application, Frontiers in Bioengineering and Biotechnology, 2022, Vol. 10, No. 8650592, pp. 1-12, ISSN 2296-4185 Asif I., Drieberg M., Jeoti V., Binti Abd Aziz A., Stojanović G., Simić M., Hussain N.: A Flexible Multiband Multicarrier Signal Design for Broadband Channel Sounding Applications, Human-centric Computing and Information Sciences, 2022, Vol. 12, No. 19, pp. 1-17, ISSN 2192-1962 Simić M., Stavrakis A., Sinha A., Markoski B., Premčevski V., Stojanović G.: Portable Respiration Monitoring System with an Embroidered Capacitive Facemask Sensor, Biosensors, 2022, Vol. 12, No. 5, pp. 1-23, ISSN 2079-6374 Nikolić I., Simić M., Pantelić I., Stojanović G., Antić Stanković J., Marković B., Savić S.: Chemical vs. Physical Methods to Improve Dermal Drug Delivery: A Case Study with Nanoemulsions and Iontophoresis, Pharmaceutics, 2022, Vol. 14, No. 6, pp. 1-20, ISSN 1999-4923 Simić M., Stavrakis A., Varun J., Stojanović G.: A Randles Circuit Parameter Estimation of Li-ion Batteries with Embedded Hardware, IEEE Transactions on Instrumentation & Measurement., 2022, Vol. 71, pp. 1-12 Petrović B., Stilinović N., Tomas Petrović A., Kojić S., Stojanović G.: Determination of salivary concentrations of leptin and adiponectin, ability to reduce ferric ions and total antioxidant capacity of saliva in patients with severe early childhood caries, Frontiers in Pediatrics, 2022, ISSN 2296-2360 Kojić T., Simić M., Pojić M., Stojanović G.: Detecting freshness of fruit and vegetable without and with edible protein-based foil, IEEE Sensors Journal, 2022, Vol. 22, No. 16, pp. 15698-15705, ISSN 1530-437X K. Stavrakis A., Stavrakis A., Simić M., Stojanović G.: A Study of the Performance Degradation of Conductive Threads Based on the Effects of Tensile Forces and Repeated Washing, Polymers, 2022, Vol. 14, No. 21, pp. 1-16, ISSN 2073-4360 Guruswamy S., Pojić M., Subramanian J., Mastilović J., Sarang S., Subbanagounder A., Stojanović G., Jeoti V.: Toward Better Food Security Using Concepts from Industry 5.0, Sensors, 2022, Vol. 22, No. 21, pp. 1-24, ISSN 1424-8220 Qureshi S., Milić L., Petrović B., Vejin M., Kojić S., Jarić S., Stojanović G.: The Measurement of Contact Angle, pH, and Conductivity of Artificial Saliva and Mouthwashes on Enamel, Glass-Ionomer, and Composite Dental Materials , Materials, 2022, Vol. 15, No. 13, pp. 4533-4533, ISSN 1996-1944 Anisa Dahlan N., Thiha A., Ibrahim F., Milić L., Muniandy S., Fauzani Jamaluddin N., Petrović B., Kojić S., Stojanović G.: Role of Nanomaterials in the Fabrication of bioNEMS/MEMS for Biomedical Applications and towards Pioneering Food Waste Utilisation, Nanomaterials, 2022, Vol. 12, No. 22, pp. 1-41, ISSN 2079-4991 Sinha A., Dhanjai ., K. Stavrakis A., Stojanović G.: Textile-based electrochemical sensors and their application, Talanta, 2022, Vol. 244, pp. 1-16, ISSN 0039-9140 Bobić Z., Kojić S., Stojanović G., Terek V., Kovačević L., Terek P.: Nanotopography Evaluation of NiTi Alloy Exposed to Artificial Saliva and Different Mouthwashes, Materials, 2022, Vol. 15, No. 23, pp. 8705-8705, ISSN 1996-1944 Zafar H., Channa A., Jeoti V., Stojanović G.: Comprehensive Review on Wearable Sweat-Glucose Sensors for Continuous Glucose Monitoring, Sensors, 2022, Vol. 22, No. 2, pp. 1-35, ISSN 1424-8220 Kovacevic B., Raj Wagle S., Mihaela Ionescu C., Jones M., Lewkowicz M., YM Wong E., Kojić S., Stojanović G., Đanić (Stojančević) M., Mikov M., Mooranian A., Al-Salami H.: Novel hydrogel comprising non-ionic copolymer with various concentrations of pharmacologically active bile acids for cellular injectable gel, Colloids and surfaces B: Biointerfaces, 2023, Vol. 222, pp. 1-11, ISSN 0927-7765 Simić M., Freeborn T., Šekara T., Stavrakis A., Jeoti V., Stojanović G.: A Novel Method for In-Situ Extracting Bio-Impedance Model Parameters Optimized for Embedded Hardware, Scientific Reports, 2023, Vol. 13, ISSN 2045-2322 Kojić T., Simić M., Vučinić-Vasić M., Stojanović G.: Sensing system based on knitted electrodes for fruit quality evaluation, Journal of Food Engineering, 2023, Vol. 353, pp. 1-9, ISSN 0260-8774 Simić M., Freeborn T., Veletić M., Seoane F., Stojanović G.: Parameter Estimation of the Single-Dispersion Fractional Cole-Impedance Model with the Embedded Hardware, IEEE Sensors Journal, 2023, ISSN 1530-437X Simić M., Stavrakis A., Milić L., Vučinić-Vasić M., Stojanović G.: Textile-based heating system for safe localized warts treatment, Journal of Science: Advanced Materials and Devices, 2023, ISSN 2468-2179 Stojanović G., Radovanović M., Kojić S., Milić L., Simić M., Kojić T., Georges Duval R., Vukmirović J., Petrović B.: Temperature sensors manufactured from edible materials intended for oral cavity operation, International Journal of Precision Engineering and Manufacturing-Green Technology, 2023, ISSN 2198-0810 Petrović B., Kojić S., Milić L., Luzio A., Perić T., Marković E., Stojanović G.: Toothpaste ingestion-evaluating the problem and ensuring safety: systematic review and meta-analysis, Frontiers in Public Health, 2023, Vol. 11, pp. 1-12, ISSN 2296-2565 Nasrin R., Lazouskaya M., Danilov (Pajčin) I., Petrović B., Grahovac (Ranković) J., Simić M., Willander M., Nur O., Stojanović G.: Monitoring the effect of pH on the growth of pathogenic bacteria using electrical impedance spectroscopy, Results in Engineering, 2023, Vol. 20, No. 101425, pp. 1-9, ISSN 2590-1230 Aslam Khan M., Aslam M., Bin Abdullah M., Hasan A., A. Shah S., Stojanović G.: Recent perspective of polymeric biomaterial in tissue engineering–a review, Materials Today Chemistry, 2023, Vol. 34, No. 101818, pp. 1-19, ISSN 2468-5194 Zafar H., Vučinić-Vasić M., Popović Ž., Babković K., Stojanović G.: Influence of stitch type division and geometry on the electrical properties of conductive embroidered structures, Journal of Industrial Textiles, 2023, Vol. 53, ISSN 1530-8057 Simić M., K. Stavrakis A., Kojić T., Jeoti V., Stojanović G.: Parameter Estimation of the Randles Equivalent Electrical Circuit Using Only Real Part of the Impedance, IEEE Sensors Journal, 2023, Vol. 23, No. 5, pp. 4922-4929, ISSN 1530-437X Simić M., K. Stavrakis A., Radovanović M., Iqbal A., Jeoti V., Stojanović G.: A Portable Device for Passive LC Sensors Readout with Low-Coupling Enhanced Sensitivity, IEEE Transactions on Instrumentation and Measurement, 2023, Vol. 72, pp. 1-12, ISSN 0018-9456 Luca F., Sinha A., Seddaoui N., di Biasio J., Ricci F., Stojanović G., Arduini F.: Paper card-like electrochemical platform as a smart point-of-care device for reagent-free glucose measurement in tears, Chemical Communications, 2023, Vol. 59, No. 29, pp. 4300-4303, ISSN 1359-7345 Popović Ž., Thiha A., Ibrahim F., Petrović B., Dahlan N., Milić L., Kojić S., Stojanović G.: Oral micro‑electronic platform for temperature and humidity monitoring, Scientific Reports, 2023, Vol. 13, No. 21277, pp. 1-12, ISSN 2045-2322 Radovanović M., Stojanović G., Simić M., Suvara D., Milić L., Kojić S., Škrbić B.: Edible Electronic Components Made from Recycled Food Waste, Advanced Electronic Materials, 2024, No. 2300905, pp. 1-13, ISSN 2199-160X Simić M., Jeoti V., Stojanović G.: Parameter extraction of the Cole-impedance model for in-situ monitoring of electrochemical sources, Journal of Energy Storage, 2024, Vol. 77, No. 109895, pp. 1-13, ISSN 2352-152X	72	576.00
M21a	Rad u međunarodnom časopisu izuzetnih vrednosti Rad u međunarodnom časopisu izuzetnih vrednosti Raghavendra R., Bellew P., Mcloughlin N., Stojanović G., Damnjanović M., Desnica V., Živanov Lj.: Characterization of Novel Varistor+Inductor Integrated Passive Devices , IEEE Electron Devices Letters, 2004, Vol. 25, No. 12, pp. 778-780, ISSN 0741-3106, UDK: 10.1109/LED.2004.838321 Stojanović G., Kitić G., Savić S., Crnojević-Bengin V.: Electrical Characterization of Nickel Manganite Powders in High-Frequency Range, Journal of Alloys and Compounds, 2013, Vol. 554, pp. 264-270, ISSN 0925-8388 Cvejin K., Sliwa M., Manjakkal L., Kulawik J., Stojanović G., Szwagierczak D.: Impedancemetric NO sensor based on YSZ/perovskite neodymium cobaltite operating at high temperatures, Sensors and Actuators B: Chemical, 2016, Vol. 228, pp. 612-624, ISSN 0925-4005 Savić S., Stojanović G., Vasiljević D., Vojisavljević K., Dapčević A., Radojković A., Pršić S., Branković G.: Nanoindentation study of nickel manganite ceramics obtained by a complex polymerization method, Ceramics International, 2016, Vol. 42, No. 10, pp. 2276-2282, ISSN 0272-8842 Radovanović M., Vasiljević D., Krstić D., Antić I., Korzhyk O., Stojanović G., Škrbić B.: Flexible sensors platform for determination of cadmium concentration innsoil samples, Computers and Electronics in Agriculture, 2019, Vol. 166, ISSN 0168-1699 Wagle S., Kovačević B., Walker D., Ionescu C., Shah U., Stojanović G., Kojić S., Mooranian A., Al-Salami H.: Alginate-based drug oral targeting using bio-micro/nano encapsulation technologies, Expert Opinion on Drug Delivery, 2020, Vol. 17, No. 10, pp. 1361-1376, ISSN 1744-7593 Kasyap S., Jeoti V., Drieberg M., Soeung S., Iqbal A., Stojanović G., Sarang S.: Simultaneous Detection of Multiple Surface Acoustic Wave Sensor-Tags for Water Quality Monitoring utilizing Cellular Code-Reuse Approach, IEEE Internet of Things Journal, 2021, Vol. 1, No. 1, pp. 1-13, ISSN 2327-4662 Stojanović G., Sinha A., E. Ali A., Varun J., B. Radoičić M., D. Marković D., M. Radetić M.: Impedance analysis of milk quality using functionalized polyamide textile-based sensor, Computers and Electronics in Agriculture, 2021, Vol. 191, No. 106545, pp. 1-8, ISSN 0168-1699 Bajac B., Vukmirović J., Samardžić N., Banys J., Stojanović G., Bobic J., Srdić V.: Dielectric and ferroelectric properties of multilayer BaTiO3/NiFe2O4 thin films prepared by solution deposition technique, Ceramics International, 2022, Vol. 48, No. 18, pp. 26378-26386, ISSN 0272-8842 Muhammad Umar A., Saiful Izwan A., Sarish R., Anwarul H., Qureshi S., Stojanović G.: Bioactive scaffold (sodium alginate)-g-(nHAp@SiO2@GO) for bone tissue engineering, International Journal of Biological Macromolecules, 2022, Vol. 222, No. 2022, pp. 462-472, ISSN 0141-8130 Muhammad Umar A., Stojanović G., Mohd Faizal B., Dolatshahi-Pirouz A., E. Marei H., Ashammakhi N., Anwarul H.: Fundamental properties of smart hydrogels for tissue engineering applications: A review, International Journal of Biological Macromolecules, 2024, Vol. 254, No. 127882, ISSN 0141-8130	11	110.00
M22	Rad u istaknutom međunarodnom časopisu Rad u istaknutom međunarodnom časopisu Damnjanović M., Stojanović G., Živanov Lj., Desnica V.: Comparison of different structures of ferrite EMI suppresors, Microelectronics International, 2006, Vol. 23, No. 3, pp. 42-48, ISSN 1356-5362, UDK: 10.1108/13565360610680758 Damnjanović M., Stojanović G., Desnica V., Živanov Lj., Ramesh R., Pat B., Neil M.: Analysis, design and characterization of ferrite EMI suppressors, IEEE Transactions on Magnetics, 2006, Vol. 42, No. 2, pp. 270-277, ISSN 0018-9464, UDK: 10.1109/TMAG.2005.860485 Stojanović G., Srdić V., Milanović M.: Electrical properties of yttrium-doped Zn and Ni–Zn ferrites, Physica Status Solidi a, 2008, Vol. 205, No. 10, pp. 2464-2468, ISSN 0031-8965, UDK: 10.1002/pssa.200723525 Stojanović G., Damnjanović M., Živanov Lj.: Temperature dependence of electrical parameters of SMD ferrite components for EMI suppression , Microelectronics Reliability, 2008, Vol. 48, No. 7, pp. 1027-1032, ISSN 0026-2714, UDK: 10.1016/j.microrel.2008.03.020 Savić S., Stojanović G., Nikolic M., Aleksić O., Luković-Golić D., Nikolić P.: Electrical and transport properties of nickel manganite obtained by Hall effect measurements, Journal of Materials Science: Materials in Electronics, 2009, Vol. 20, No. 3, pp. 242-247, ISSN 0957-4522, UDK: DOI 10.1007/s10854-008-9710-5 Damnjanović M., Živanov Lj., Stojanović G., Menićanin A.: Influence of Conductive Layer Geometry on Maximal Impedance Frequency Shift of Zig-zag Ferrite EMI Suppressor, IEEE Transactions on Magnetics, 2010, Vol. 46, No. 6, pp. 1303-1306, ISSN 0018-9464 Đurić S., Stojanović G., Damnjanović M., Radovanović M., Laboure E.: Design, Modeling, and Analysis of a Compact Planar Transformer, IEEE Transactions on Magnetics, 2012, Vol. 48, No. 11, pp. 4135-4138, ISSN 0018-9464 Bednar N., Matović J., Stojanović G.: Properties of Surface Dielectric Barrier Discharge Plasma Generator for Fabrication of Nanomaterials, Journal of Electrostatics, 2013, Vol. 71, No. 6, pp. 1068-1075, ISSN 0304-3886 Đurić S., Stojanović G., Damnjanović M., Laboure E.: Analysis of the Coupling Effect in Different Meander - Type Winding Planar Transformer, IEEE Transactions on Magnetics, 2013, Vol. 49, No. 7, pp. 3993-3996, ISSN 0018-9464 Bednar N., Stojanović G.: An Organic Electronics Laboratory Course for Graduate Students in Electrical Engineering, IEEE Transactions on Education, 2013, Vol. 56, No. 3, pp. 280-286, ISSN 0018-9359 Vučinić-Vasić M., Bošković M., Perović M., Spasojević V., Stojanović G., Antić B.: Mossbauer Spectra and Crystallite Size Related Magnetic/Electric Properties of Yb Substituted Zn-Ferrite Nanoparticles, Nanoscience and Nanotechnology Letters, 2014, Vol. 6, No. 4, pp. 314-318, ISSN 1941-4900 Đurić S., Stojanović G.: A Compact Planar Transformer With an Improved Winding Configuration, IEEE Transactions on Magnetics, 2014, Vol. 50, No. 11, pp. 1-4, ISSN 0018-9464, UDK: 10.1109/TMAG.2014.2321630 Lečić N., Stojanović G., Đurić S., Laboure E.: Design and Analysis of Planar Symmetric Six-Phase Coupled Inductors, IEEE Transactions on Magnetics, 2015, No. 99, pp. 1-8, ISSN 0018-9464, UDK: 10.1109/TMAG.2014.2383358 Vukmirović J., Tripković Đ., Bajac B., Kojić S., Stojanović G., Srdić V.: Comparison of barium titanate thin films prepared with inkjet printing and spin coating, Processing and Application of Ceramics, 2015, Vol. 9, pp. 151-156, ISSN 1820-6131 Samardžić N., Bajac B., Srdić V., Stojanović G.: Conduction mechanisms in multiferroic multilayer BaTiO3/NiFe2O4/BaTiO3 memristors, Journal of Electronic Materials, 2017, ISSN 0361-5235, UDK: 10.1007/s11664-017-5618-2 Babković K., Damnjanović M., Nađ L., Kisić M., Stojanović G.: Inductive Displacement Sensor of Novel Design Printed on Polyimide Foil, IEEE Transactions on Magnetics, 2017, Vol. 53, No. 4, pp. 1-5, ISSN 0018-9464 Samardžić N., Bajac B., Bajić J., Đurđić E., Miljević B., Srdić V., Stojanović G.: Photoresistive switching of multiferroic thin film memristors, Microelectronic Engineering, 2018, Vol. 187, pp. 139-143, ISSN 0167-9317, UDK: 10.1016/j.mee.2017.10.018 Radovanović M., Kojić S., Vasiljević D., Stojanović G.: Characterization of LC sensor structures realized by PCB and LTCC technology for determining moisture in building materials, Processing and Application of Ceramics, 2018, Vol. 12, No. 1, pp. 13-20, ISSN 1820-6131 Stojanović G., Radovanović M., Vasiljević D., Kojić T., Pivaš B., Puškar T., Kapadia S., Baumann R.: Comparison of Performances of Flexible Tailor-Made Force Sensing Resistors Fabricated Using Inkjet and Xurographic Techniques, Journal of Sensors, 2019, Vol. 2019, No. ID 9181492, ISSN 1687-725X Stojanović G., Pojić M., Kojić S., Mišan A., Vasiljević D.: Mechanical properties of edible biofilm as a substrate for printed electronics, Applied Physics. A: Materials Science and Processing, 2019, Vol. 125, No. 576, pp. 1-7, ISSN 0947-8396 Stojanović G., Radovanović M., Krstić D., Ignjatović I., Dragaš J., Carević V.: Determination of pH in Powdered Concrete Samples or in Suspension, Applied Sciences, 2019, Vol. 9, No. 16, pp. 3257-3267, ISSN 2076-3417 Stojanović G., Paroški M., Samardžić N., Radovanović M., Krstić D.: Microfluidics-Based Four Fundamental Electronic Circuit Elements Resistor, Inductor, Capacitor and Memristor, Electronics (Basel), 2019, Vol. 8, No. 9, pp. 960-972, ISSN 2079-9292 Mooranian A., Zamani N., Luna G., Al-Sallami H., Mikov M., Goločorbin-Kon S., Stojanović G., Arfuso F., Kovacevic B., Al-Salami H.: Bile acid-polymer-probucol microparticles: protective effect on pancreatic β-cells and decrease in type 1 diabetes development in a murine model, Pharmaceutical Development and Technology, 2019, Vol. 24, No. 10, pp. 1272-1277, ISSN 1083-7450 Samae M., Ritmetee P., Chirasatitsin S., Kojić S., Kojić T., Jevremov J., Stojanović G., Al Salami H.: Precise manufacturing and performance validation of paper-based passive microfluidic micromixers, International Journal of Precision Engineering and Manufacturing, 2020, Vol. 21, No. 3, pp. 499-508, ISSN 2234-7593 Stojanović G., Radetić M., Šaponjić Z., Radoičić M., Radovanović M., Popović Ž., Vukmirović S.: A Textile-Based Microfluidic Platform for the Detection of Cytostatic Drug Concentration in Sweat Samples, Applied Sciences, 2020, Vol. 10, No. 4392, pp. 1-14, ISSN 2076-3417 Sarang S., Stojanović G., Stankovski S., Trpovski Ž., Drieberg M.: Energy-Efficient Asynchronous QoS MAC Protocol for Wireless Sensor Networks, Wireless Communications and Mobile Computing, 2020, Vol. 2020, No. 8860371, pp. 1-13, ISSN 1530-8669 Kojić S., Birgermajer S., Radonić V., Kundačina (Podunavac) I., Jevremov J., Petrović B., Marković E., Stojanović G.: Optimization of hybrid microfluidic chip fabrication methods for biomedical application, Microfluidics and Nanofluidics, 2020, Vol. 24, No. 9, pp. 1-12, ISSN 1613-4982 Simić M., Babić Z., Risojević V., Stojanović G.: Non-iterative parameter estimation of the 2R-1C model suitable for low-cost embedded hardware, Frontiers of Information Technology & Electronic Engineering, 2020, Vol. 21, No. 3, pp. 476-490, ISSN 2095-9184 Kundačina (Podunavac) I., Hinić S., Kojić S., Jelenčiakova N., Radonić V., Petrović B., Stojanović G.: Microfluidic Platform for Examination of Effect of Chewing Xylitol Gum on Salivary pH, O2, and CO2, Applied Sciences, 2021, Vol. 11, No. 5, pp. 2049-2061, ISSN 2076-3417 Simić M., Stojanović G., Kojić T., Stojanović G., Kojić T., Simić M., Radovanović M., Panić (Ratković) S., Srdić V., Vukmirović S., Ellison G., Al-Salami H.: A functionalized paper strip-based platform for rapid detection of anticancer drug concentrations, Journal of Sensors, 2021, Vol. 2021, No. 5558859, pp. 1-11, ISSN 1687-725X Simić M., Stavrakis A., Adrian S., Simić M., Stojanović G.: Electrical Characterization of Conductive Threads for Textile Electronics, Electronics (Basel), 2021, Vol. 10, No. 967, ISSN 2079-9292 Kojic T., Kovacevic B., Sinha A., Simić M., Stojanović G.: Silver Thread‐Based Microfluidic Platform for Detection of Essential Oils Using Impedance Spectroscopy, Applied Sciences, 2022, Vol. 12, No. 7, pp. 3596-3607, ISSN 2076-3417 Stavrakis A., Kojić S., Petrović B., Nešković (Marković) I., Stojanović G.: Performance Evaluation of Dental Flosses Pre- and Post-Utilization, Materials, 2022, Vol. 15, No. 4, pp. 1-14, ISSN 1996-1944 Sinha A., K. Stavrakis A., Qureshi S., Stojanović G.: Flexible polyamide-based dental floss sensor for pH monitoring, Materials Letters, 2022, Vol. 326, No. 132971, pp. 1-4, ISSN 0167-577X Sinha A., Stavrakis A., Simić M., Stojanović G.: Polymer-Thread-Based Fully Textile Capacitive Sensor Embroidered on a Protective Face Mask for Humidity Detection, ACS Omega, 2022, Vol. 7, No. 49, pp. 44928-44938, ISSN 2470-1343 Simić M., Stavrakis A., Stojanović G.: Portable Heating and Temperature Monitoring System with a Textile Heater Embroidered on the Facemask, ACS Omega, 2022, Vol. 7, No. 50, pp. 47214-47224, ISSN 2470-1343 Thiha A., Ibrahim F., Joseph K., Petrović B., Kojić S., Dahlan N., Jamaluddin N., Qureshi S., Stojanović G.: A Novel Microfluidic Compact Disc to Investigate Electrochemical Property Changes Between Artificial and Real Salivary Samples Mixed with Mouthwashes Using Electrical Impedance Analysis, PLOS ONE, 2023, Vol. 18, No. 2, pp. 1-19, ISSN 1932-6203 Sarang S., Stojanović G., Drieberg M., Stankovski S., Bingi K., Jeoti V.: Machine Learning Prediction based Adaptive Duty Cycle MAC Protocol for Solar Energy Harvesting Wireless Sensor Networks, IEEE Access, 2023, pp. 17536-17554, ISSN 2169-3536 Volpes G., Valenti S., Zafar H., Pernice R., Stojanović G.: Feasibility of conductive embroidered threads for I2C sensors in microcontroller-based wearable electronics, Flexible and Printed Electronics, 2023, Vol. 8, No. 015016, pp. 1-9, ISSN 2058-8585 Sinha A., K. Stavrakis A., Simić M., Stojanović G.: Wearable humidity sensor embroidered on a commercial face mask and its electrical properties, Journal of Materials Science, 2023, Vol. 58, pp. 1680-1693, ISSN 0022-2461 Protić D., Stanković M., Prodanović R., Vulić I., Stojanović G., Simić M., Ostojić G., Stankovski S.: Numerical Feature Selection and Hyperbolic Tangent Feature Scaling in Machine Learning-Based Detection of Anomalies in the Computer Network Behavior (https://doi.org/10.3390/electronics12194158), Electronics (Basel), 2023, Vol. 12, No. 19, pp. 1-20, ISSN 2079-9292 Iqbal A., Drieberg M., Jeoti V., Abd Aziz A., Stojanović G., Simić M., Hussain N.: Advancing Multiband OFDM Channel Sounding: An Iterative Time Domain Estimation for Spectrally Constrained Systems, IEEE Access, 2023, Vol. 11, pp. 99999-99999, ISSN 2169-3536 Aslam Khan M., Stojanović G., Hassan R., Sahaya Anand T., Al-Ejji M., Anwarul H.: Role of Graphene Oxide in Bacterial Cellulose−Gelatin Hydrogels for Wound Dressing Applications, ACS Omega, 2023, Vol. 2023, No. 8, pp. 15909-15919, ISSN 2470-1343 Đoc´osˇ M., Aung T., Vejin M., Movrin D., Fauzani Jamaluddin N., Kojić S., Petrović B., Ibrahim F., Stojanović G.: Analysis of Covarine Particle in Toothpaste Through Microfluidic Simulation, Experimental Validation, and Electrical Impedance Spectroscopy, ACS Omega, 2024, Vol. 2024, ISSN 2470-1343 Khan R., Aslam Khan M., Stojanović G., Javed A., Haider S., Abd Razak S.: Fabrication of Bilayer Nanofibrous-Hydrogel Scaffold from Bacterial Cellulose, PVA, and Gelatinas Advanced Dressing for Wound Healing and Soft Tissue Engineering, ACS Omega, 2024, Vol. 2024, No. 9, pp. 6527-6536, ISSN 2470-1343 Stavrakis A., Simić M., Damnjanović M., Stojanović G.: A fully textile-based, tunable, force and strain sensing resistor for e-textile applications, Heliyon, 2024, Vol. 10, No. e26069, pp. 1-8, ISSN 2405-8440 Qureshi S., Hanif M., Jeoti V., Stojanović G., T. Khan M.: Review of Fabrication of SAW Sensors on Flexible Substrates: Challenges and Future, Results in Engineering, 2024, Vol. 22, No. 102323, pp. 1-11, ISSN 2590-1230 Simić M., Stojanović G.: Wearable Device for Personalized EMG Feedback-based Treatments, Results in Engineering, 2024, Vol. 23, No. 102472, pp. 1-14, ISSN 2590-1230	48	240.00
M23	Rad u međunarodnom časopisu Rad u međunarodnom časopisu Stojanović G., Marić A., Živanov Lj.: Review of various realizations of integrated monolithic transformers, Informacije MIDEM - Journal of microelectronics, electronic components and materials, 2005, Vol. 35, No. 3, pp. 122-132, ISSN 0352-9045, UDK: 621.3:(53+54+621+66) Stojanović G., Živanov Lj.: Novel efficient method for inductance calculation of inductors with optimized layout, International Journal of RF and Microwave Computer-Aided Engineering, 2006, Vol. 16, No. 5, pp. 463-469, ISSN 1096-4290, UDK: 10.1002/mmce.20166 Stojanović G., Živanov Lj., Damnjanović M.: Novel efficient methods for inductance calculation of meander inductor, COMPEL - The international journal for computation and mathematics in electrical engineering, 2006, Vol. 25, No. 4, pp. 916-928, ISSN 0332-1649, UDK: 10.1108/03321640610684079 Satarić M., Bednar N., Satarić B., Stojanović G.: Actin filaments as nonlinear RLC transmission lines, International Journal of Modern Physics B, 2009, Vol. 23, No. 22, pp. 4697-4711, ISSN 0217-9792, UDK: 10.1142/S021797920905331X Damnjanović M., Stojanović G., Živanov Lj.: An educational software tool for design of ferrite EMI suppressors , International Journal of Electrical Engineering Education, 2009, Vol. 46, No. 3, pp. 225-238, ISSN 0020-7209 Zoranović A., Stojanović G., Malbaša V.: Development of an MP3 player using an MP3 hardware decoder, International Journal of Electrical Engineering Education, 2010, Vol. 47, No. 3, pp. 329-342, ISSN 0020-7209 Stojanović G., Lečić N., Damnjanović M., Živanov Lj.: Electrical and temperature characterization of NiZn ferrites, International Journal of Applied Electromagnetics and Mechanics, 2011, Vol. 35, No. 3, pp. 165-176, ISSN 1383-5416, UDK: 10.3233/JAE-2011-1329 Radonić V., Palmer K., Stojanović G., Crnojević-Bengin V.: Flexible Sierpinski Carpet Fractal Antenna on a Hilbert Slot Patterned Ground, International Journal of Antennas and Propagation, 2012, Vol. 2012, No. 980916, pp. 1-7, ISSN 1687-5869, UDK: 10.1155/2012/980916 Samardžić N., Jeranče N., Stojanović G.: Novel Solution for Flexible Inductive Position Sensor, Sensor Letters, 2013, Vol. 11, No. 10, pp. 1881-1886, ISSN 1546-198X Jeranče N., Stojanović G., Samardžić N., Kesler D.: Parallel computing applied to inductance calculation for flexible inductors, COMPEL - The international journal for computation and mathematics in electrical engineering, 2013, Vol. 32, No. 3, pp. 1067-1081, ISSN 0332-1649, UDK: 10.1108/03321641311306097 Krklješ D., Vasiljević D., Stojanović G.: A Capacitive Angular Sensor with Flexible Digitated Electrodes, Sensor Review, 2014, Vol. 34, No. 4, pp. 382-388, ISSN 0260-2288 Kojić S., Ajkalo S., Gužvica M., Vasiljević D., Radovanović M., Stojanović G.: A Counter of Number of Products on the Shelf – Influences on Capacitance of Interdigitated Capacitor with Application in Intelligent Packaging, Informacije MIDEM - Journal of microelectronics, electronic components and materials, 2014, Vol. 44, No. 4, pp. 321-329, ISSN 0352-9045, UDK: 621.3:(53+54+621+66) Milinković B., Milićević M., Simić Đ., Stojanović G., Đurić R.: Low-pass filter for UWB system with the circuit for compensation of process induced on-chip capacitor variation, Informacije MIDEM - Journal of microelectronics, electronic components and materials, 2015, Vol. 45, No. 4, pp. 266-276, ISSN 0352-9045 Krklješ D., Stojanović G.: An Ink-Jet Printed Capacitive Sensor for Angular Position/Velocity Measurements, Advances in Electrical and Computer Engineering, 2016, Vol. 16, No. 4, pp. 77-82, ISSN 1582–7445 Simić M., Babić Z., Risojević V., Stojanović G.: A Novel Non-Iterative Method for Real-Time Parameter Estimation of the Fricke-Morse Model, Advances in Electrical and Computer Engineering, 2016, Vol. 16, No. 4, pp. 57-62, ISSN 1582–7445 Pajkanovic A., Stojanović G., Đurić S.: Performance analysis of meander-type inductor in silicon and flexible technology, Microelectronics Journal, 2016, Vol. 56, pp. 57-64, ISSN 0026-2692 Vasiljević D., Brajković D., Krklješ D., Obrenović B., Stojanović G.: Testing and Characterization of Multilayer Force Sensing Resistors Fabricated on Flexible Substrate, Informacije MIDEM - Journal of microelectronics, electronic components and materials, 2017, Vol. 47, No. 1, pp. 40-48, ISSN 0352-9045 Pajkanović A., Videnović-Mišić M., Stojanović G.: Design and Characterization of a 130 nm CMOS Ultra-Wideband Low-Noise Amplifier, Informacije MIDEM - Journal of microelectronics, electronic components and materials, 2017, Vol. 47, No. 2, pp. 59-70, ISSN 0352-9045 Stojanović G., Lečić N., Kojić S., Vasiljević D.: Characterization of customized ferrite cores for a compact six-phase coupled inductor, International Journal of Applied Electromagnetics and Mechanics, 2018, Vol. 57, pp. 19-27, ISSN 1383-5416 Thamphiwatana S., Phairatana T., Chirasatitsin S., Samae M., Velvé Casquillas G., Al-Salami H., Kojić S., Stojanović G.: A microfuidic micromixer fabricated using polydimethylsiloxane-based platform for biomedical applications, MIDEM - Journal of microelectronics, electronic components and materials, 2018, Vol. 48, No. 3, pp. 173-179, ISSN 0352-9045, UDK: UDK621.3:(53+54+621+66) Petrović B., Kojić S., Perić T., Šipovac M., Lazarević J., Stefanović S., Stojanović G.: Surface characterisation of the raw and cooked bovine cortical metatarsal bone, Acta of Bioengineering and Biomechanics, 2019, Vol. 21, No. 1/2019, pp. 13-21, ISSN 1509-409X Marković D., Petrović B., Perić T., Trišić D., Kojić S., Kuljić B., Stojanović G.: Evaluation of sealant penetration in relation to fissure morphology, enamel surface preparation protocol and sealing material, Oral Health and Preventive Dentistry, 2019, ISSN 1602-1622 Petrović B., Marković D., Kojić S., Perić T., Dubourg G., Drljača M., Stojanović G.: Characterization of Glass Ionomer Cements Stored in Various Solutions, Materiali in Tehnologije, 2019, Vol. 2, No. 53, pp. 285-293, ISSN 1580-2949, UDK: 620.1:620.3:666.1:616.314-74 Vranić I., Vranić I., Antić B., Stojanović G., Al-Salami H.: Influence of the Main Filter on QRS-amplitude and Duration in Human Electrocardiogram, Measurement Science Review, 2019, Vol. 19, No. 1, pp. 29-34, ISSN 1335-8871 Mooranian A., Zamani N., Mikov M., Goločorbin-Kon S., Stojanović G., Arfuso F., Al-Salami H.: Stability and biological testing of taurine-conjugated bile acid antioxidant microcapsules for diabetes treatment., Therapeutic Delivery, 2019, Vol. 10, No. 2, pp. 99-106, ISSN 2041-5990 Kojić T., Stojanović G., Miletić A., Radovanović M., Al-Salami H., Arduini F.: Testing and Characterization of Different Papers as Substrate Material for Printed Electronics and Application in Humidity Sensor, Sensors and Materials, 2019, Vol. 31, No. 9, pp. 2981-2995, ISSN 0914-4935 Kojić T., Radovanović M., Stojanović G., Pivaš B., Medić D., Al-Salami H.: Comparison of performances of flexible sensors on foil and paper for efficient bacterial concentration measurement, Sensor Review, 2020, Vol. 40, No. 1, pp. 1-7, ISSN 0260-2288 Chandran A., Chandran M. K. A., Bajac B., Filipič G., Gregor F., Cvejić Ž., Srdić V., Radovanović M., Simić M., Sarang S., Sohail S., Stojanović G.: Synthesis and Characterization of Tin Oxide Nanopowder and Its Application to Sensing Different Pathogens, Sensors and Materials, 2021, Vol. 33, No. 2, pp. 513-527, ISSN 0914-4935 Kundačina (Podunavac) I., Hinić S., Kojić S., Jelenčiakova N., Radonić V., Petrović B., Stojanović G.: Microfluidic Approach for Measurements of pH, O2, and CO2 in Saliva, Sensors and Materials, 2021, Vol. 33, No. 3, pp. 1037-1050, ISSN 0914-4935 Hinic S., Petrović B., Kojić S., Omerović N., Jevremov J., Jelenciakova N., Stojanović G.: Viscosity and mixing properties of artificial saliva and four different mouthwashes, Biorheology, 2021, Vol. 57, No. 2-4, pp. 87-100, ISSN 0006-355X Kojić S., Simić M., Aber M., Petrović B., Stojanović G.: INFLUENCE OF ARTIFICIAL SALIVA AND ESSENTIAL OIL-BASED SOLUTIONS ON THE ELECTRICAL PARAMETERS OF NITINOL AND STAINLESS STEEL ARCHWIRES, Materiali in Tehnologije, 2022, Vol. 56, No. 5, pp. 445-452, ISSN 1580-2949, UDK: 620.193.16:616.314-089.23 E. Ali A., Stojanović G., Jeoti V., Sekulić D., Sinha A.: Impact of Various Wearability Conditions on the Performances of Meander-Line Z-Shaped Embroidered Antenna, International Journal of Antennas and Propagation, 2022, Vol. 2022, No. 6741689, pp. 1-15, ISSN 1687-5869 Simić M., Stojanović G.: Parameter Estimation of 2R-1C Circuit using Embedded Hardware and Measured Impedance Modulus, Journal of Circuits Systems and Computers, 2023, Vol. 32, No. 15, ISSN 0218-1266 Joseph K., Ibrahim F., Qureshi S., Petrović B., Kojić S., Thiha A., Jamaluddin N., Dahlan N., Stojanović G.: Enhanced Sweat Biosensing with Thread-Embedded Microfluidic Devices, Medical Science Monitor, 2024, No. 30:e943321, ISSN 1234-1010	34	102.00
M24	Rad u časopisu međunarodnog značaja verifikovanog posebnom odlukom Rad u časopisu međunarodnog značaja verifikovanog posebnom odlukom Simić M., Vasiljević D., Vasiljević D., Žlebič Č., Stojanović G., Žlebič Č., Simić M., Stojanović G., Manjakkal L., Stamenković Z.: Cost-effective sensors and sensor nodes for monitoring environmental parameters, Facta universitatis - series: Electronics and Energetics, 2018, Vol. 31, No. 1, pp. 11-23, ISSN 0353-3670	1	3.00
M31	Predavanje po pozivu sa međunarodnog skupa štampano u celini Predavanje po pozivu sa međunarodnog skupa štampano u celini Damnjanović M., Živanov Lj., Đurić S., Stojanović G., Menićanin A.: Efficiency Analysis of Simple Structures of Ferrite EMI Suppressors in Different Ferrite Materials, 7. International Symposium Nikola Tesla, Beograd: AKADEMSKA MISAO/ACADEMIC MIND, 23 November, 2011, pp. 93-100, ISBN 978-86-7466-421-6	1	3.00
M33	Saopštenje sa međunarodnog skupa štampano u celini Saopštenje sa međunarodnog skupa štampano u celini Živanov Lj., Jenei S., Stojanović G., Aleksić O.: Analysis and simulation of monolithic spiral inductors on silicon substrate, 3. International Symposium Interdisciplinary Regional Research (Hungary, Romania, Yugoslavia), Novi Sad, 24-25 September, 1998, pp. 187-190 Živanov M., Živanov Lj., Stojanović G., Mileusnić S.: Application of microsystems in agriculture, 3. International Symposium Interdisciplinary Regional Research (Hungary, Romania, Yugoslavia), Novi Sad, 24-25 September, 1998, pp. 745-749 Živanov Lj., Stojanović G., Vujanić A., Jenei S.: Determination of optimal parameters of micromachined inductive sensor, 9. International Symposium on Electromagnetic Fields in Electrical Engineering, Pavia, 23-25 September, 1999, pp. 369-372 Stojanović G., Živanov Lj.: Determination of Quality Factor dependence on temperature and Impurity concentration in monolithic spiral inductor, 22. International Conference on Microelectronics - MIEL, Niš, 14-17 May, 2000, pp. 469-472 Stojanović G., Živanov Lj.: Application of MEMS inductors in sensors and RF components, 6. International symposium interdisciplinary Regional Research Hungary , Romania and Serbia and Montenegro, Novi Sad, 3-4 October, 2002, pp. 219-224 Marić V., Živanov Lj., Stojanović G.: RF and MEMS Components in LTCC Technology, 6. International symposium interdisciplinary Regional Research Hungary , Romania and Serbia and Montenegro, Novi Sad, 3-4 October, 2002, pp. 208-213 Ilić V., Živanov M., Stojanović G.: Hand Held Device for Measurement of Soil Moisture, 6. International symposium interdisciplinary Regional Research Hungary , Romania and Serbia and Montenegro, Novi Sad, 3-4 October, 2002, pp. 116-120 Nikolić M., Babković K., Malbaša V., Mezei I., Stojanović G., Slankamenac M., Damnjanović M.: Implementation of an educational multi-user measurement system, 1. EE Education in the 21st Century in the South-Eastern Europe(+Greece and Turkey), Sarajevo, 1-3 July, 2003, pp. 91-94 Damnjanović M., Živanov Lj., Stojanović G., Desnica V.: Influence of geometry of conductive layers on impedance of ferrite EMI suppressor, 12. International Symposium on Power Electronics – Ee, Novi Sad: Power Electronics Society, Novi Sad, 5-7 November, 2003, pp. 1-4, ISBN 86-80249-74-2 Nikolić M., Babković K., Stojanović G., Malbaša V., Mezei I., Slankamenac M., Damnjanović M.: Implementation of an educational multi-user measurement system , 1. IEEE Education in 21st Century in South East Europe, Sarajevo, 1-4 July, 2003, pp. 91-94 Damnjanović M., Živanov Lj., Stojanović G.: Influence of geometry of conductive layers and different ferrites on impedance of EMI suppressor , 16. International Conference on Electrical Machines ICEM, Krakow: Institute of Mechatronics and Information Systems, Technical University of Lodz, 5-8 September, 2004, pp. 557-558, ISBN 83-921428-1-0 Damnjanović M., Živanov Lj., Stojanović G., Desnica V.: Modeling and Simulation of Impedance of Ferrite EMI Suppressor with Two Conductive Layers, 24. International Conference on Microelectronics - MIEL, Niš: IEEE Serbia and Montenegro Section, IEEE Electron Device Society, 16-19 May, 2004, pp. 245-248, ISBN 0-7803-8166-1 Stojanović G., Živanov Lj.: Comparison of optimal design of different spiral inductors, 24. International Conference on Microelectronics - MIEL, Niš: IEEE Serbia and Montenegro Section, IEEE Electron Device Society, 16-19 May, 2004, pp. 613-616, ISBN 0-7803-8166-1 Marić V., Stojanović G., Desnica V., Živanov Lj.: Improved Simulation Model of Novel Varistor+Inductor Integrated Passive Devices, 5. IEEE International Conference EUROCON, Beograd, 2005, pp. 1691-1694 Damnjanović M., Živanov Lj., Stojanović G.: Simple EMI suppressor structures in different ferrite materials , 2. PSU-UNS International Conference on Engineering and Environment - ICEE, Novi Sad: Faculty of Technical Sciences, Novi Sad, 19-21 May, 2005, pp. 81-81, ISBN 86-85211-45-X Stojanović G., Ljikar T., Šorđan R.: Scaling meander inductor from micro to nano, 29. International Semiconductor Conference CAS, Sinaia, 27-29 September, 2006, pp. 93-96 Preradović S., Stojanović G., Karmakar N.: The Automated Layout Design of Monolithic Inductors and Transformers Using Expert Layout Editor, 1. IEEE AP-S International Symposium on Antennas and Propagation and USNC/URSI National Radio Science Meeting, Albuquerque, 9-14 July, 2006, pp. 593-596 Stojanović G., Radosavljević G., Marić A., Živanov Lj.: Optimization of Integrated Octagonal Inductors Using Response Surface Method, 7. International Conference on Technical Informatics, Temišvar: CONTI’2006, 8-9 June, 2006, pp. 157-162 Damnjanović M., Stojanović G., Živanov Lj.: Modeling and Simulation of Ferrite and Varistor EMI Suppressors , 7. International Conference on Thermal, Mechanical and Multiphysics Simulation and Experiments in Micro-Electronics and Micro-Systems, EuroSimE, Como: The Institute of Electrical and Electronics Engineers, 24-26 April, 2006, pp. 513-518, ISBN 1-4244-0275-1 Damnjanović M., Živanov Lj., Stojanović G.: Common Mode Chokes For EMI Suppression in Telecommunication Systems, 7. IEEE International Conference EUROCON, Varšava, 2007, pp. 905-909, ISBN 1-4244-0813-X Damnjanović M., Živanov Lj., Stojanović G.: SMD Common Mode Choke for EMI Suppression, 14. International Symposium on Power Electronics – Ee, Novi Sad: Fakultet tehničkih nauka Novi Sad, 7-9 November, 2007, ISBN 978-86-7892-065-3 Radosavljević G., Marić A., Stojanović G., Živanov Lj., Smetana W., Unger M., Homolka H.: The fabrication process of RF inductor structures in the LTCC technology, 30. International Semiconductor Conference CAS, Sinaia, 15-17 October, 2007, pp. 249-254 Lečić N., Stojanović G., Damnjanović M., Živanov Lj.: Analysis of temperature dependence of SMD ferrite EMI suppressors, 634. 9th International Symposium, Interdisciplinary Regional Research ISIRR2007, Novi Sad: UNS, 21-22 June, 2007, pp. 1-6, ISBN 976-86-7892-042-4 Radosavljević G., Marić A., Stojanović G., Živanov Lj., Smetana W., Unger M., Homolka H.: Application of the LTCC technology for the fabrication of miniature 3D RF transformers, 31. International Conference of IMAPS Poland Chapter, Rzeszow, 23-26 September, 2007, pp. 191-194 Stojanović G., Radovanović M., Radonić V.: Design, simulation and analysis of novel fractal integrated transformers, 12. Mediterranean Microwave Symposium MMS, Budimpešta, 14-16 May, 2007, pp. 105-108 Stojanović G., Aleksić O., Savić S., Živanov Lj.: Application of NTC thick-film segmented thermistor for the realisation of an ultra-low power thermostat, 11. Electroceramics, Manchester, 31-4 August, 2008 Stojanović G., Radovanović M., Maletin M., Nikolić Lj.: Electrical characterisation of nanostructured titania coatings deposited on interdigitated electrode system for sensors applications, 11. Electroceramics, Manchester, 31-4 August, 2008 Marić A., Radosavljević G., Živanov M., Živanov Lj., Stojanović G., Mayer M., Jachimowicz A., Keplinger F.: Modelling and Characterisation of Fractal Based RF Inductors on Silicon Substrate, 7. ASDAM, International Conference on Advanced Semiconductor Devices and Microsystems, Smolenice, 12-16 October, 2008, pp. 191-194 Damnjanović M., Živanov Lj., Stojanović G.: Analysis of Effects of Material and Geometrical Characteristics on the Performance of SMD Common Mode Choke, 26. International Conference on Microelectronics MIEL, Niš: IEEE Serbia and Montenegro Section, IEEE Electron Device Society, 11-14 May, 2008, pp. 267-270, ISBN 978-1-4244-1881-7 Marić A., Radosavljević G., Živanov Lj., Stojanović G.: A simple approuch for modeling and simulation monolithic inductors, 32. International Semiconductor Conference, Sinaia, 11-13 October, 2009, pp. 459-462, ISBN 978-1-4244-4413-7 Radosavljević G., Smetana W., Marić A., Živanov Lj., Unger M., Stangl G., Stojanović G.: A sensitivity improvement of a non contact LTCC resonant pressure sensor, 33. International Conference and Exhibition IMAPS, Pszczyna, 21-24 September, 2009, pp. 304-308, ISBN 978-83-917701-7-7 Maksimović M., Stojanović G., Radosavljević G., Radovanović M.: Design and fabrication of a wireless, passive sensor for environment monitoring, 1. International Workshop on ICT and Sensing Technologies in Agriculture, Forestry and Environment "BioSense09", Novi Sad, 14-15 October, 2009 Radovanović M., Malešev M., Radonjanin V., Stojanović G.: Innovative design of a cheap wireless sensor for monitoring water content in construction materials, 3. Junior Science Conference, Wien, 7-9 April, 2010, pp. 191-192, ISBN 978-3-200-01797-9 Stojanović G., Marić A., Radosavljević G., Laboure E., Smetana W.: Performance analysis of LTCC transformers for application in DC/DC converters, 14. International Power Electronics and Motion Control Conference EPE-PEMC, Ohrid: Ss. Cyril and Methodius University in Skopje, 6-9 September, 2010, pp. 174-178, ISBN 978-1-4244-7854-5 Radosavljević G., Marić A., Smetana W., Marić A., Živanov Lj., Stojanović G., Živanov Lj., Unger M., Stojanović G.: Micro Force Sensor Fabricated in the LTCC Technology, 1. International Conference on Microelectronics MIEL, Niš, 16-19 May, 2010, pp. 221-224, ISBN 978-1-4244-7198 Jeranče N., Samardžić N., Vasiljević D., Stojanović G.: Modelling and design of passive components for flexible electronics, 16. International Symposium on Power Electronics – Ee, Novi Sad, 26-28 October, 2011, pp. 1-5 Bednar N., Matović J., Atassi I., Stojanović G.: A Metallic Nanoparticles Generation Method for Conductive Inks, 16. International Symposium on Power Electronics – Ee, Novi Sad, 26-28 October, 2011 Bednar N., Stojanović G.: An Innovative Laboratory Course of Organic Electronics, 8. EUROCON, Lisabon: IEEE, April 27-29, 27-29 April, 2011, pp. 1-4, ISBN 978-1-4244-7485-1 Radovanović M., Stojanović G., Blaž N.: Computer as a tool for controlling measurement of water content in building materials, 8. EUROCON, Lisabon: IEEE, 27-29 April, 2011, pp. 1-4, ISBN 978-1-4244-7485-1 Jeranče N., Samardžić N., Vasiljević D., Stojanović G.: An efficient computational technique for performance prediction of inductors on flexible substrates, 5. Advanced Electromagnetics Symposium – AES, Pariz, 16-19 April, 2012 Samardžić N., Vasiljević D., Jeranče N., Stojanović G.: Design and fabrication of flexible ink-jet printed resonant-circuit sensor, 35. International Spring Seminar on Electronics Technology, Beč: Vienna University of Technolog, 9-13 May, 2012, pp. 1-4 Radovanović M., Stojanović G.: Performances comparison of wireless sensors for measuring moisture in construction materials, 48. International Conference on Microelectronics, Devices and Materials MIDEM, Otočec, 19-21 September, 2012, pp. 387-391, ISBN 978-961-92933-2-4 Damnjanović M., Živanov Lj., Menićanin A., Kisić M., Žlebič Č., Đurić S., Stojanović G.: Learning EMC/EMI Design Problems Using Simulation Tool and Measurement Techniques, 48. International Conference on Microelectronics, Devices and Materials MIDEM, Otočec: MIDEM - Society for Microelectronics, Electronic Components and Materials, 19-21 September, 2012, pp. 225-230, ISBN 978-961-92933-2-4 Bednar N., Matović J., Atassi I., Stojanović G.: Synthesis of Metal Nanoparticles Using One Atmosphere Pressure Glow Plasma, 28. International Conference on Microelectronics (MIEL), Niš, 13-16 May, 2012 Blaž N., Pantelić B., Marić A., Vasiljević D., Stojanović G., Živanov Lj.: Influence of Various Parameters on Capacitance of Interdigital Capacitor Realized in Flexible Technology, 48. International Conference on Microelectronics, Devices and Materials MIDEM, Otočec, 19-21 September, 2012, pp. 291-294 Bednar N., Matović J., Stojanović G.: Actuators for Dielectric Barrier Discharge Reactor Used in Synthesis of Metal Nanoparticles, 9. INDEL, Banja Luka, 1-3 November, 2012 Samardžić N., Jeranče N., Stojanović G.: Optimization and modeling of ink-jet printed flexible position sensor, 2. ICMAST-International Conference on Materials and Applications for Sensors and Transducers, Budimpešta, 24-28 May, 2012 Krklješ D., Stojanović G., Vasiljević D., Babković K.: Analysis of the mechanical inaccuracies in capacitive encoder with flexible electrodes, 8. International Symposium on Industrial Electronics and Applications (INDEL), Banja Luka, 4-6 November, 2010, pp. 295-298, ISBN 978-99955-46-14-4 Kojić S., Ajkalo S., Gužvica M., Vasiljević D., Radovanović M., Stojanović G.: Influence of the position of the electrodes on capacitance of interdigitated capacitor fabricated on flexible foil, 9. INDEL, Banja Luka, 1-3 November, 2012, pp. 308-312, ISBN 987-99955-46-14-4 Gambuzza V., Samardžić N., Dautović S., Xibilia M., Graziani S., Fortuna L., Stojanović G., Frasca M.: A data driven model of TiO2 printed memristors, 8. International Conference on Electrical and Electronics Engineering (ELECO), Bursa, 28-30 November, 2013 Samardžić N., Kojić T., Vukmirović J., Tripković Đ., Bajac B., Srdić V., Stojanović G.: Performance analysis of resistive switching devices based on BaTiO3 thin films , 5. International Conference on Materials and Applications for Sensors and Transducers (IC-MAST), Mykonos, 27-30 September, 2015 Simić M., Babić Z., Stojanović G., Babić Z., Risojević V., Risojević V., Stojanović G., Bulić P., Bulić P.: Influence of Frequency of Excitation Signal and Electrode Position on the Transthoracic Impedance Measurement, 24. International Electrotechnical and Computer Science Conference ERK, Portorož, 21-23 September, 2015, pp. 99-102, ISBN 1581-4572 Simić M., Babić Z., Risojević V., Ramos A., Stojanović G., Ramos A., Stojanović G.: A System for Rapid and Automated Bioimpedance Measurement, 1. In Proceedings of the Society for Design and Process Science SDPS, Dallas, 1-5 November, 2015, pp. 242-247, ISBN 1090-9389 Samardžić N., Kojić T., Vukmirović J., Tripković Đ., Bajac B., Srdić V., Stojanović G.: Performance analysis of resistive switching devices based on BaTiO3 thin films, 5. International Conference on Materials and Applications for Sensors and Transducers (IC-MAST), Mykonos, 27-30 September, 2015 Simić M., Stojanović G., Manjakkal L., Zaraska K., Zaraska K.: Multi-Sensor System for Remote Environmental (Air and Water) Quality Monitoring, 24. Telekomunikacioni forum TELFOR, Beograd, 22-23 November, 2016, pp. 1-4 Simić M., Babić Z., Risojević V., Stojanović G.: A novel approach for parameter estimation of Fricke-Morse model using Differential Impedance Analysis, 1. International Conference on Biological and Medical Engineering – CMBEBIH, Sarajevo, 16-18 March, 2017, pp. 487-494 Radovanović M., Kojić S., Vasiljević D., Samardžić N., Crespo F., Cargou S., Velve Casquillas G., Chirasatitsin S., Stojanović G.: Performances comparison of microfludic passive mixer fabricated in low-cost and PDMS technologies, 8. PSU-UNS International Conference on Engineering and Technology - ICET, Novi Sad, 8-10 June, 2017, pp. 1-4 Vasiljević D., Stojanović G., Radovanović M., Kojić S., Medić D., Pivaš B., Šorđan R.: PCB sensor for bacteria detection in saline, 1. IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes (IMWS-AMP), Pavia, 20-22 September, 2017 Simić M., Stojanović G.: Compact Electronic System for Complex Impedance Measurement and its Experimental Verification, 23. European Conference on Circuit Theory and Design, ECCTD, Catania, 4-6 September, 2017, pp. 1-4 Laketa J., Radovanović M., Kojić T., Stojanović G., Vukmirović S., Mikov M., Stamenković Z.: Determination of electrical parameters of dried blood spot samples with different concentration of methotrexate, 1. IEEE East-West Design & Test Symposium (EWDTS), Novi Sad, 29-2 September, 2017, pp. 1-4 Chirasatitsin S., Kojić S., Stojanović G.: Optimization of microchannel fabrication using xurographic technique for microfluidic chips, 11. International Scientific Conference ETIKUM, Novi Sad: FACULTY OF TECHNICAL SCIENCES, 6-8 December, 2017, pp. 13-16, ISBN 978-86-6022-00-68 Simić M., Stojanović G., Babić Z., Risojević V.: A novel approach for parameter estimation of Fricke-Morse model using Differential Impedance Analysis, 1. International Conference on Biological and Medical Engineering – CMBEBIH, Sarajevo, 16-18 March, 2017, pp. 487-494, ISBN 978-981-10-4165-5 Lazarević J., Drljača M., Brdar S., Petrović B., Kojić S., Stojanović G.: Automating of Nanoindentation raw results processing with Python module, 5. International Conference on Electrical, Electronic and Computing Engineering IcETRAN, Palić: Fakultet Tehničkih Nauka, 11-14 June, 2018, pp. 1118-1121, ISBN 978-86-7466-752-1 Pajkanović A., Stojanović G.: Temperature Performance of Meander-type Inductor in Silicon Technology, 15. 15th International Conference on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design, SMACD'2018, Prague, 2-7 July, 2018, pp. 193-196 Kojić S., Milićević D., Lazarević J., Drljača M., Stojanović G.: Design and Testing of Microfluidic Micromixer Fabricated Using Xurographic Technique, 41. International Spring Seminar on Electronics Technology - ISSE, Zlatibor: IEEE, 16-20 May, 2018, pp. 1-5, ISBN 978-1-5386-5731-7 Laketa J., Kojić T., Radovanović M., Kojić S., Dajana M., Stojanović G.: Cost-Effective Microfluidic Device for Detection of Psychoactive Substances, 12. International Symposium on Industrial Electronics and Applications (INDEL), Banja Luka: IEEE, 1-3 November, 2018, pp. 1-4 Vučinić S., Petrović B., Kojić S., Šipovac M., Stefanović S., Stojanović G.: Influence of specimen preparation and nanoindentation protocol on the mechanical properties of bovine bone, 5. International Conference on Electrical, Electronic and Computing Engineering IcETRAN, Palić: Fakultet Tehničkih Nauka, 11-14 June, 2018, pp. 728-731, ISBN 978-86-7466-752-1 Vicko K., Puškar T., Jevremov J., Kojić S., Stojanović G., Petrović B.: The Effects of Sample Preparation and Nanoindentation Protocol on Surface Mechanical Properties of Primary Teeth Enamel, 12. International Scientific Conference ETIKUM, Novi Sad: UNIVERSITY OF NOVI SAD, FACULTY OF TECHNICAL SCIENCES DEPARTMENT OF PRODUCTION ENGINEERING CHAIR OF METROLOGY, QUALITY, FIXTURES, TOOLS AND ECOLOGICAL ENGINEERING ASPECTS, 6-8 December, 2018, ISBN 978-86-6022-123-2 Škrbić B., Antić I., Živančev (Šarović) J., Buljovčić M., Johansen J., Stojanović G.: Level of heavy elements in vegetables from flooded arable soil in Vojvodina Province: Health risk assessment, 21. Danube-Kris-Mures-Tisa (DKMT) Euroregion Conference on Environment and Health, Novi Sad, 6-8 June, 2019, pp. 146-152 Stojanović A., Jevremov J., Petrović B., Kojić S., Lazarević J., Stojanović G.: Analysis of PVC microfluidic system for antibacterial solutions delivery in dentistry, 6. International Conference on Electrical, Electronic and Computing Engineering IcETRAN, Srebrno jezero: Društvo za ETRAN i Akademska misao, 3-5 June, 2019, pp. 244-247, ISBN 978-86-7466-785-9 Milićević D., Nikolić K., Vukmirović J., Samardžić N., Srdić V., Stojanović G.: Resistive switching and synaptic behavior in zirconium doped thin film metal-oxide-metal devices, 23. IEEE International Symposium on Design and Diagnostics of Electronic Circuits & Systems (DDECS), Novi Sad: IEEE, 22-24 April, 2020, pp. 152-155, ISBN 978-1-7281-9938-2 Bobić Z., Petrović B., Kojić S., Terek V., Škorić B., Kovačević L., Stojanović G., Terek P.: A Preliminary Study of the Various Media Influence of NiTi Corrosion, 14. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Fakultet tehničkih nauka, Departman za Proizvodno Mašinstvo, 23-25 September, 2021, pp. 155-158, ISBN 978-86-6022-364-9 Bobić Z., Petrović B., Kojić S., Terek V., Škorić B., Kovačević L., Stojanović G., Terek P.: Influence of fluorine-containing mouthwashes on NiTi alloy corrosion, 38. International Conference of Production Engineering - ICPE-S, Čačak: University of Kragujevac, Faculty of Technical Sciences Čačak, Serbia, 14-15 October, 2021, pp. 288-294, ISBN 978-86-7776-252-0 Milić L., Petrović B., Kojić S., Qureshi S., Stojanović G.: Using the Hough Transform in the Automatization of Contact Angle Calculation, 29. Telekomunikacioni forum TELFOR, Beograd, 23-24 November, 2021, pp. 1-4, ISBN 978-1-6654-2585-8/21 Milić L., Qureshi S., Vejin M., Stanojević K., Kojić S., Petrović B., Stojanović G.: AUTOMATION OF MEASUREMENT OF WETTING ANGLE OF HUMAN ENAMEL WITH ANTISEPTIC SOLUTIONS USING MATLAB, 13. International Scientific Conference ETIKUM, Novi Sad, 2-4 December, 2021, ISBN 978-86-6022-387-8 Tegeltija S., Babić M., Tarjan L., Baranovski I., Stojanović G.: One Solution for Validation of Legal Usage Of Reserved Parking Spaces For People With Disabilities, 20. International Symposium INFOTEH-JAHORINA (INFOTEH), Jahorina: IEEE, 17-19 March, 2021, pp. 1-6, UDK: DOI: 10.1109/INFOTEH51037.2021.9400689 Radovanović M., Krnić K., Simić M., Stojanović G.: Edible electronics components for biomedical applications, 22. International Symposium INFOTEH-JAHORINA (INFOTEH), Jahorina, 15-17 March, 2023, ISBN 978-1-6654-7546-4 Milić L., Radovanović M., Simić M., Qureshi S., Micić Đ., Stojanović G.: Development of E-Tattoo Sensors for Monitoring of Plants Hydration Level, 22. Mediterranean Electrotechnical Conference MELECON, Porto, 25-27 June, 2024	78	78.00
M34	Saopštenje sa međunarodnog skupa štampano u izvodu Saopštenje sa međunarodnog skupa štampano u izvodu Radovanović M., Milanović M., Nikolić Lj., Stojanović G.: Investigation of electrical parameters of nanostructured titania coatings deposited on interdigitated electrode system, 7. Students’ Meeting, Novi Sad, 6-8 December, 2007, pp. 30-30, ISBN 978-86-80995-62-5 Jeranče N., Samardžić N., Vasiljević D., Stojanović G.: Design and fabrication of printed flexible capacitors and inductors, 1. Swiss e-Print, Basel, 1-2 December, 2011 Damnjanović M., Živanov Lj., Đurić S., Stojanović G., Menićanin A.: Impedance modeling of simple structures of ferrite EMI suppressors in different ferrite materials, 20. International Conference on Soft Magnetic Materials, Kos Island: IEEE Transactions on Magnetics, 18-22 September, 2011, pp. 141-141, ISBN 978-960-9534-14-7 Vučinić-Vasić M., Antić A., Antić B., Stojanović G., Meden A., Kremenović A.: Structural and electrical properties of Yb substituted Zn-ferrite obtained by HEBM, 7. International Conference on Mechanochemistry and Mechanical Alloying (INCOME), Herceg Novi, 2011 Savić S., Stojanović G., Vojisavljević K., Pršić S., Vasiljević D., Branković Z., Branković G.: Mechanical properties of nickel manganite ceramics investigated with nanoindentation, 11. International Conference on Nanostructured Materials, Rhodes, 2012, pp. 224-224 Lukić-Petrović S., Štrbac D., Stojanović G., Petrović D.: Measurements of the Hall Effect on Cu-As-Se-I Amorphous Thin Films, 16. ICSFS, Genova, 1-6 July, 2012 Đurić S., Stojanović G., Damnjanović M., Radovanović M., Laboure E.: Design and Analysis of a Compact Planar Transformer for DC/DC Converter Application (GH-07), 1. IEEE International Magnetics Conference INTERMAG, Vancouver: IEEE Magnetics Society, 7-11 May, 2011 Đurić S., Stojanović G., Damnjanović M.: Analysis of Meander-type Winding PCB Transformers for Application in DC/DC converters (FG-11), 1. Joint MMM-Intermag Conference, Chicago: IEEE Magnetics Society, American Institute of Physics, 14-18 January, 2013 Tripković Đ., Vukmirović J., Bajac B., Kojić S., Mojić B., Stojanović G., Srdić V.: Characterization of BaTiO3 films fabricated by ink-jet printing process, 10. Students’ Meeting, Processing and Application of Ceramics, Novi Sad, 6-9 November, 2013, pp. 43-43 Kuniyil A., Bajac B., Vukmirović J., Srdić V., Stojanović G.: Synthesis and characterization of SnO2 films, 10. Students’ Meeting, Processing and Application of Ceramics, Novi Sad, 6-9 November, 2013, pp. 64-64 Savić S., Stojanović G., Kitić G., Crnojević-Bengin V., Pršić S., Branković G.: Electrical characterization of nickel manganite powders in high-frequency range, 15. International conference on materials, tribology, recycling, Vela Luka, 2013, pp. 45-45 Savić S., Stojanović G., Vojisavljević K., Pršić S., Vasiljević D., Branković G.: Nanoindentation of nickel manganite ceramics obtained by complex polymerization method, 2. Conference of The Serbian Society for Ceramic Materials CSCS, Beograd, 2013, pp. 97-97, ISBN 978-86-80109-18-3 Vukmirović J., Bajac B., Tripković Đ., Mojić B., Stojanović G., Srdić V.: Synthesis and characterization of barium titanate sols and their application for film fabrication by ink-jet printing, 15. Annual Conference-YUCOMAT, Herceg Novi, 2-6 September, 2013, pp. 90-90 Štrbac D., Štrbac G., Stojanović G., Lukić-Petrović S., Petrović D.: Modification of some optical and mechanical properties of amorphous As-S-Se thin films by copper introduction, , 2. International Conference on Material Science and Engineering Technology, London, 16-17 November, 2014, pp. 27-27 Vukmirović J., Tripković Đ., Bajac B., Samardžić N., Đurđić E., Cvejić Ž., Stojanović G., Srdić V.: Structural characterization of BaTiO3 thin films obtained with spin coating and inkjet printing method, 13. Young Researchers Conference-Materials Science and Engineering, Beograd: Institute of Technical Sciences of SASA, 10-12 December, 2014, ISBN 978-86-80321-30-1 Đurić S., Stojanović G.: Performance analysis of a compact planar transformer with an improved winding configuration (FA-7), 20. International Magnetics Conference (INTERMAG), Drezden: IEEE Magnetics society, 4-8 May, 2014, pp. 2110-2110 Vukmirović J., Tripković Đ., Bajac B., Kojić S., Stojanović G., Srdić V.: Fabrication of BaTiO3 thin films by inkjet printing, 11. Students’ Meeting, Novi Sad, 21-24 October, 2015, pp. 128-128 Samardžić N., Stojanović G., Damjanovic D., Hofmann H., Mionic M.: Fabrication and characterization of ink-jet printed TiO2 based memristors, 1. FEMS Junior Euromat, Lausanne, 10-14 July, 2016, ISBN 978-2-8399-1926-5 Stanojev J., Vukmirović J., Bajac B., Kojić S., Blaž N., Stojanović G., Živanov Lj., Srdić V.: Investigation of dielectric properties of barium strontium titanate (BST) thin films for potential application in tunable microwave devices, 15. Electroceramics, Limoges, 27-29 June, 2016 Stanojev J., Vukmirović J., Bajac B., Kojić S., Blaž N., Stojanović G., Živanov Lj., Srdić V.: Investigation of dielectric properties of barium strontium titanate (BST) thin films for potential application in tunable microwave devices, 15. Electroceramics, Limoges, 27-29 June, 2016 Vukmirović J., Bajac B., Nestorović A., Dubourg G., Stanojev J., Kojić S., Stojanović G., Srdić V.: CHALLENGES IN PREPARATION OF MICROWAVE TUNABLE DEVICES WITH DOPED BaTiO3 THIN FILMS, 15. EUROMAT-European Congress on Advanced Materials and Processes, Thessaloniki: Hellenic Metallurgical Society and Hellenic Society for the Science and Technology of Condensed Matter, 17-22 September, 2017, pp. 133-133 Kojić S., Stojanović A., Jevremov J., Lazarević J., Petrović B., Stojanović G.: DESIGN OF MICROFLUIDIC PVC CHIP BASED SYSTEMS FOR SALIVARY DIAGNOSTICS, 72. International Scientific Conference in Dentistry, Novi Sad: Dentistry Clinic of Vojvodina, 29-30 March, 2019, ISBN 978-86-80894-03-4 Samardžić N., Nedeljković M., Vukmirović J., Srdić V., Stojanović G.: Study on effect of Zr dopping on the electrical properties of BaTiO3 thin film resistive switching devices, 6. International Congress on Microscopy & Spectroscopy (INTERM 2019), Mugla, 12-18 May, 2019 Bobić Z., Petrović B., Kojić S., Terek V., Kovačević L., Stojanović G., Škorić B., Terek P.: Effects of corrosion on NiTi caused by fluoride and chloride media in non-accelerated corrosion tests, 19. Young Researchers Conference Materials Sciences and Engineering - YRC, Beograd: Institute of Technical Sciences of SASA, 1-3 December, 2021, pp. 63-63, ISBN 978-86-80321-36-3 Vejin M., Đoćoš M., Pojic M., Terek P., Kojić S., Bobić Z., Petrović B., Stojanović G.: Edible Sensor for Electric Impedance Spectroscopic Analysis of Bioactive Liquids Containing Silver Nanoparticles, 12. International Conference "Nanomaterials: Applications & Properties" - IEEE NAP, Krakow: IEEE Publishing, 11-16 September, 2022, pp. 42-42, ISBN 978-1-6654-8982-9 Adrian S., Simić M., Stojanović G.: Flexible, Fully Textile-Based Force Sensors for Wearable Applications, 15. International Symposium on Flexible Organic Electronics , Thessaloniki, 4-7 July, 2022, pp. 167-167 Đoćoš M., Vejin M., Luzio A., Feltri E., Kojić S., Petrović B., Stojanović G.: Investigation of covarine particle behaviour in a microfluidic mixer with artificial saliva, 24. Annual Conference-YUCOMAT, Herceg Novi: Material Research Society of Serbia, 4-8 September, 2023, pp. 1-1, ISBN 978-86-919111-8-8	27	13.50
M51	Rad u vodećem časopisu nacionalnog značaja Rad u vodećem časopisu nacionalnog značaja Radosavljević G., Marić A., Stojanović G., Živanov Lj., Smetana W., Unger M., Homolka H.: Application of the LTCC technology for the fabrication of the RF 3D inductor , Romanian Journal of Information Science and Technology, 2008, Vol. 11, No. 2, pp. 193-202, ISSN 1453-8245 Stojanović G., Radovanović M., Radonić V.: A new fractal-based design of stacked integrated transformers, Active and Passive Electronic Components, Hindawi, 2008, No. 134805, pp. 1-8, ISSN 0882-7516 Živanov Lj., Damnjanović M., Menićanin A., Stojanović G., Marić A., Radosavljević G.: Karakterizacija feritnih EMI potiskivača i transformatora korišćenjem vektorskog analizatora mreža, Tehnika, 2010, Vol. 65, No. 3, pp. 75-83, ISSN 0040-2176, UDK: 62(062.2)(497.1) Blaž N., Marić A., Radosavljević G., Živanov Lj., Stojanović G., Atassi I., Smetana W.: Modeling and characterization of frequency and temperature variation of complex permeability of ferrite LTCC material, Progress In Electromagnetics Research B, 2010, Vol. 23, pp. 131-146, ISSN 1937-6472 Mooranian A., Zamani N., Mikov M., Goločorbin-Kon S., Stojanović G., Arfuso F., Kovačević B., Al-Salami H.: Bio Micro-Nano Technologies of Antioxidants Optimised Their Pharmacological and Cellular Effects, ex vivo, in Pancreatic β-Cells., Nanotechnology, Science and Applications, 2020, Vol. 13, pp. 1-9, ISSN 1177-8903	5	10.00
M52	Rad u časopisu nacionalnog značaja Rad u časopisu nacionalnog značaja Stojanović G., Živanov Lj., Damnjanović M.: Compact Form of Expressions for Inductance Calculation of Meander Inductors, Serbian Journal of Electrical Engineering, 2004, Vol. 1, No. 3, pp. 57-68, ISSN 1451-4869 Stojanović G., Živanov Lj., Damnjanović M.: Optimal design of circular inductors , Facta universitatis - series: Electronics and Energetics, 2005, Vol. 18, No. 4, pp. 56-70, ISSN 0353-3670 Stojanović G., Damnjanović M., Živanov Lj.: Analiza temperaturne zavisnosti induktivnih struktura ubačenih u feritni materijal, Tehnika - Elektrotehnika, 2006, Vol. 55, No. 3, pp. 11-18, ISSN 0013-5836 Bednar N., Stojanović G.: Implementation of an Ultra-Low Power Thermostat with Slope A/D Conversion, Electronics, 2008, Vol. 12, No. 1, pp. 3-7, ISSN 1450-5843 Napijalo V., Vasiljević D., Marić A., Stojanović G.: Consideration for Use of an Inkjet Technology for Fabrication of Microwave Circuits, Microwave Review, 2013, Vol. 19, No. 1, pp. 20-25, ISSN 1450-5835, UDK: 621.3.049.77 Petrović M., Kitić D., Samardžić N., Kostić M., Stojanović G., Igic M., Kostić M., Mionić Ebersold M.: THE EFFECT OF HERBAL EXTRACT (FOENICULUM VULGARE MILL.) SOLUTION ON THE MECHANICAL AND WETTING PROPERTIES OF HEAT POLYMERIZED DENTURE BASE RESIN, Acta stomatologica Naissi, 2016, Vol. 32, No. 74, pp. 1623-1634, ISSN 0352-5252 Petrović B., Stefanović S., Kojić S., Porčić M., Jevremov J., Stojanović G.: A pattern of metatarsal bovine bone surface alterations produced by human permanent teeth - An experimental approach, Journal of Archaeological Science: Reports, 2019, Vol. 27, ISSN 2352409X	7	10.50
M53	Rad u naučnom časopisu Rad u naučnom časopisu Stojanović G., Živanov Lj., Damnjanović M.: Improved method for optimisation of inductors using geometric programming, Electronics, 2003, Vol. 7, No. 1, pp. 31-34, ISSN 1450-5843 Stojanović G., Živanov Lj., Damnjanović M.: Optimal design of octagonal inductors, Transactions on Automatic Control and Computer Science, Buletinul Stiintific al Universitatii "Politehnica" din Timisoara, Romania, 2004, Vol. 49, No. 3, ISSN 1224-600X Slankamenac M., Nikolić M., Babković K., Stojanović G., Mezei I., Damnjanović M.: An educational multi – user measurement system (EMUMS), Analele Universitatii Eftimie Murgu, 2005, Vol. 12, No. 1, pp. 279-286, ISSN 1453-7394 Stojanović G., Radosavljević G., Marić A., Živanov Lj.: Application of Response Surface Method for Optimal Design of Octagonal Micro-Inductors, Transactions on Automatic Control and Computer Science, Buletinul Stiintific al Universitatii "Politehnica" din Timisoara, Romania, 2006, Vol. 51, No. 2, pp. 69-73, ISSN 1224-600X Bednar N., Stojanović G.: Implementation of an ultra-low power thermostat with slope A/D conversion, Electronics, 2008, Vol. 12, No. 1, pp. 3-7, ISSN 1450-5843 Džakula R., Savić S., Stojanović G.: Investigation of electrical characteristics of different ceramic samples using Hall effect measurement, Processing and Application of Ceramics, 2008, Vol. 2, No. 1, pp. 33-37, ISSN 1820-6131 Radosavljević G., Marić A., Stojanović G., Živanov Lj.: Mikro-transformatori sa planarnim i 3D namotajima bazirani na LTCC tehnologiji, ETF Journal of Electrical Engineering, 2008, Vol. 17, No. 1, pp. 74-81, ISSN 0353-5207 Maksimović M., Stojanović G.: Analysis of Geometry Influence on Performances of Capacitive Pressure Sensor, Electronics, 2009, Vol. 13, No. 2, pp. 41-45, ISSN 1450-5843 Jeranče N., Samardžić N., Vasiljević D., Stojanović G.: Modeling and design of passive components for flexible electronics, Electronics, 2012, Vol. 16, No. 1, pp. 57-61, ISSN 1450-5843, UDK: 621.38 Lukić-Petrović S., Štrbac D., Petrović D., Stojanović G.: Measurements of the Hall Effect on Cu-As-Se-I Amorphous Thin Films, e-Journal of Surface Science and Nanotechnology, 2012, Vol. 10, pp. 535-537, ISSN 1348-0391	10	10.00
M61	Predavanje po pozivu sa skupa nacionalnog značaja štampano u celini Predavanje po pozivu sa skupa nacionalnog značaja štampano u celini Kojić S., Stojanović G., Vasiljević D., Samardžić N.: Mogućnosti ink-jet štampane elektronike, 1. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad, 12-13 Jun, 2013, pp. 35-38, ISBN 978-86-7892-512-2	1	1.50
M63	Saopštenje sa skupa nacionalnog značaja štampano u celini Saopštenje sa skupa nacionalnog značaja štampano u celini Živanov Lj., Stojanović G., Jenei S.: Monolitni induktori u Si tehnologiji, 2. INDEL Simpozijum Industrijska Elektronika, Banja Luka, 24-26 Septembar, 1998, pp. 43-48 Stojanović G., Živanov Lj., Jenei S.: Određivanje temperaturne zavisnosti faktora dobrote monolitnog spiralnog induktora, 2. INDEL Simpozijum Industrijska Elektronika, Banja Luka, 24-26 Septembar, 1998, pp. 49-51 Stojanović G., Živanov Lj., Damnjanović M., Živanov M.: Optimizacija spiralnih induktora za RF integrisana kola, 48. ETRAN - Konferencija za elektroniku, telekomunikacije, računarstvo, automatiku i nuklearnu tehniku, Čačak: Društvo za ETRAN, 6-10 Jun, 2004, pp. 322-325, ISBN 86-80509-49-3 Stojanović G., Živanov Lj., Damnjanović M.: Poboljšan postupak optimizacije induktora korišćenjem metode geometrijskog programiranja, 3. Naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina, 24-26 Mart, 2003, pp. 323-327, ISBN 99938-624-2-8 Marić V., Živanov Lj., Stojanović G.: Integrisane pasivne komponente - pregled, 48. ETRAN - Konferencija za elektroniku, telekomunikacije, računarstvo, automatiku i nuklearnu tehniku, Čačak, 6-10 Jun, 2004, pp. 101-104 Stojanović G., Živanov Lj., Damnjanović M.: Jednostavan i tačan izraz za induktivnost induktora oblika meandra, 48. ETRAN - Konferencija za elektroniku, telekomunikacije, računarstvo, automatiku i nuklearnu tehniku, Čačak, 6-10 Jun, 2004, pp. 97-100, ISBN 86-80509-49-3 Stojanović G., Živanov Lj.: Analiza i simulacija induktivnih fraktalnih struktura korišćenjem ANSOFT HFSS-a, 5. INDEL Simpozijum Industrijska Elektronika, Banja Luka, 12-13 Novembar, 2004, pp. 14-19 Stojanović G., Živanov Lj., Crnojević-Bengin V.: Dizajn i simulacija novih fraktalnih integrisanih transformatora, 49. ETRAN - Konferencija za elektroniku, telekomunikacije, računarstvo, automatiku i nuklearnu tehniku, Budva, 5-10 Jun, 2005, pp. 115-118 Stojanović G., Živanov Lj., Damnjanović M.: Automatsko projektovanje layout-a monolitnih induktora i transformatora u programskom paketu EXPERT, 4. Naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina, 23-25 Mart, 2005, pp. 354-358, ISBN 99938-624-2-8 Damnjanović M., Živanov Lj., Stojanović G.: Modelovanje i simulacija karakteristika EMI potiskivača, 4. Naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet Istočno Sarajevo, 23-25 Mart, 2005, pp. 323-327, ISBN 99938-624-2-8 Čanak R., Damnjanović M., Živanov Lj., Stojanović G.: Projektovanje EMI potiskivača za primene u telekomunikacijama, 14. TELFOR, Beograd: Društvo za telekomunikacije, Beograd, 21-23 Novembar, 2006, pp. 429-432, ISBN 86-7466-275-7 Radosavljević G., Stojanović G., Marić A., Živanov Lj.: Uticaj izbora funkcije aproksimacije na optimizaciju integrisanih induktora Response Surface metodom, 50. ETRAN - Konferencija za elektroniku, telekomunikacije, računarstvo, automatiku i nuklearnu tehniku, Beograd, 6-9 Jun, 2006, pp. 113-116, ISBN 86-80509-58-2 Stojanović G., Radosavljević G., Živanov Lj.: Optimizacija integrisanih induktora različite geometrije korišćenjem Response Surface metode , 5. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina, 22-24 Mart, 2006, pp. 471-475, ISBN 99938-624-2-8 Kalabrić M., Stojanović G., Garovnikov T.: Metode za neinvazivno merenje nivoa glukoze u krvi, 6. INDEL Simpozijum Industrijska Elektronika, Banja Luka, 10-11 Novembar, 2006, pp. 187-191 Stojanović G., Radovanović M., Ljikar T., Šorđan R.: Fabrikacija induktora nano dimenzija tehnološkim procesom litografije elektronskim snopom, 6. INDEL Simpozijum Industrijska Elektronika, Banja Luka, 10-11 Novembar, 2006, pp. 42-47 Čanak R., Damnjanović M., Živanov Lj., Stojanović G.: Projektovanje EMI potiskivača za primene u telekomunikacijama, 14. TELFOR, Beograd, 21-23 Novembar, 2006, pp. 429-432, ISBN 86-7466-275-7 Kanižai V., Stojanović G.: Jedno rešenje uređaja za merenje oksigenisanosti krvi, 6. Naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina, 28-30 Mart, 2007, pp. 578-582 Radosavljević G., Stojanović G., Marić A., Živanov Lj.: RF transformatori sa planarnim i 3D namotajima projektovani za LTCC tehnologiju , 51. ETRAN - Konferencija za elektroniku, telekomunikacije, računarstvo, automatiku i nuklearnu tehniku, Herceg Novi, 4-8 Jun, 2007, ISBN 978-86-80509-62-4 Antić D., Radosavljević G., Marić A., Stojanović G.: Simulacija RF 3D induktora projektovanog za LTCC tehnologiju u Agilent ADS programu , 15. TELFOR, Beograd, 20-22 Novembar, 2007, pp. 649-652, ISBN 978-86-7466-301-1 Radosavljević G., Marić A., Stojanović G., Živanov Lj.: Proces izrade induktorskih struktura u LTCC tehnologiji, 6. Naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina, 28-30 Mart, 2007, pp. 541-545, ISBN 99938-624-2-8 Damnjanović M., Živanov Lj., Stojanović G., Lukić L.: Feritne EMI prigušnice izrađene u LTCC tehnologiji , 6. Naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet Istočno Sarajevo, 28-30 Mart, 2007, pp. 645-649, ISBN 99938-624-2-8 Radosavljević G., Živanov Lj., Marić A., Stojanović G., Smetana W., Unger M.: Mikro senzor sile namenjen za rad u ekstremnim uslovima okruženja , 7. INDEL Simpozijum Industrijska Elektronika, Banja Luka, 6-8 Novembar, 2008, pp. 129-132, ISBN 978-99955-46-01-4 Topić Z., Stojanović G.: Realizacija sistema za održavanje željene temperature okoline korišćenjem mikrokontrolera, 52. ETRAN - Konferencija za elektroniku, telekomunikacije, računarstvo, automatiku i nuklearnu tehniku, Palić, 8-12 Jun, 2008, pp. 1-4 Bednar N., Stojanović G.: Realizacija termostata male potrošnje korišćenjem A/D konverzije sa dvostrukim nagibom, 7. Naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet, Istočno Sarajevo, 26-28 Mart, 2008, pp. 578-582 Radosavljević I., Stojanović G., Lukić L.: Analiza elektromagnetnog ponašanja mikro induktora različite geometrije u COMSOL softverskom paketu, 7. Naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet, Istočno Sarajevo, 26-28 Mart, 2008, pp. 583-588 Đorić M., Radosavljević G., Stojanović G.: Projektovanje i simulacija mikro-transformatora u Agilent ADS programu, 7. Naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet, Istočno Sarajevo, 26-28 Mart, 2008 Zoranović A., Stojanović G.: Realizacija MP3 plejera korišćenjem hardverskog MP3 dekodera, 52. ETRAN - Konferencija za elektroniku, telekomunikacije, računarstvo, automatiku i nuklearnu tehniku, Palić, 8-12 Jun, 2008 Maksimović M., Stojanović G.: Analiza uticaja geometrije na performanse kapacitivnog senzora pritiska, 8. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet, 18-20 Mart, 2009, pp. 384-388, ISBN 99938-624-2-8 Radosavljević G., Marić A., Stojanović G., Laboure E., Vasić D.: Analiza performansi feritnog transformatora za primene u DC/DC konvertorima, 53. ETRAN - Konferencija za elektroniku, telekomunikacije, računarstvo, automatiku i nuklearnu tehniku, Vrnjačka Banja, 15-18 Jun, 2009 Radovanović M., Stojanović G., Malešev M., Radonjanin V.: Novi dizajn bežičnog LC senzora za praćenje sadržaja koncentracije vlage u građevinskim materijalima, 54. ETRAN - Konferencija za elektroniku, telekomunikacije, računarstvo, automatiku i nuklearnu tehniku, Donji Milanovac, 7-11 Jun, 2010 Maksimović M., Radosavljević G., Radovanović M., Stojanović G.: Primena bežičnog LC senzora za merenje koncentracije vode u građevinskim materijalima, 9. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina, 17-19 Mart, 2010, pp. 714-718 Bajić J., Milovanović R., Stojanović G., Milovanović R., Stojanović G.: Realizacija univerzalnog prenosivog EKG/EEG uređaja, 9. Naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet , 17-19 Mart, 2010, pp. 959-962, ISBN 99938-624-2-8 Isakov S., Lazić M., Stojanović G.: Programabilno veštačko opterećenje AKUP-20 za testiranje kapaciteta akumulatorskih baterija, 54. ETRAN - Konferencija za elektroniku, telekomunikacije, računarstvo, automatiku i nuklearnu tehniku, Donji Milanovac, 7-11 Jun, 2010, pp. 1-4 Napijalo V., Vasiljević D., Marić A., Stojanović G.: Karakterizacija mikrotalasnih struktura fabrikovanih korišćenjem ink-džet tehnologije, 57. ETRAN - Konferencija za elektroniku, telekomunikacije, računarstvo, automatiku i nuklearnu tehniku, Zlatibor, 3-6 Jun, 2013, ISBN 978-86-80509-68-6 Vicko K., Puškar T., Jevremov J., Kojić S., Stojanović G., Petrović B.: The effects of sample preparation and nanoindentation protocol on surface mechanical properties of primary teeth enamel., 12. International Scientific Conference ETIKUM, Novi Sad, 6-8 Decembar, 2018, pp. 109-112	35	17.50
M64	Saopštenje sa skupa nacionalnog značaja štampano u izvodu Saopštenje sa skupa nacionalnog značaja štampano u izvodu Nikolić M., Babković K., Mezei I., Stojanović G., Damnjanović M., Slankamenac M.: Višekorisnički merni sistem za primene u elektroenergetici, 2. Kongres metrologa, Beograd, 20-22 Maj, 2003 Štrbac G., Lukić-Petrović S., Skuban F., Stojanović G., Đačanin Far Lj.: Osetljivost parametara termičke stabilnosti, 6. Scientific-Technical Meeting: "InterRegioSci 2013", Novi Sad, 2013	2	0.40
M71	Odbranjena doktorska disertacija Odbranjena doktorska disertacija Stojanović G.: Optimizacija monolitnih induktivnih mikrostruktura, Novi Sad, FTN, 2005	1	6.00
M72	Odbranjen magistarski rad Odbranjen magistarski rad Stojanović G.: Modelovanje i optimizacija monolitnih spiralnih induktora, Novi Sad, FTN, 2002	1	3.00
M84	Bitno poboljšan postojeći proizvod ili tehnologija Bitno poboljšan postojeći proizvod ili tehnologija Nikolić M., Babković K., Mezei I., Stojanović G., Damnjanović M., Slankamenac M.: Višekorisnički edukativni merni sistem, 2003	1	3.00
M85	Prototip, nova metoda, softver, standardizovan ili atestiran instrument, Prototip, nova metoda, softver, standardizovan ili atestiran instrument, Damnjanović M., Stojanović G., Živanov Lj.: Softverski paket EMISUP II za određivanje električnih karakteristika feritnih EMI potiskivača struktura Jednostruki kalem i Dvostruki kalem, 2005 Damnjanović M., Stojanović G., Živanov Lj.: Softverski paket EMISUP za određivanje električnih karakteristika jednostavnih struktura feritnih EMI potiskivača, 2005 Damnjanović M., Stojanović G., Živanov Lj.: Softver EMISUP III za određivanje električnih karakteristika feritnih EMI potiskivača cik-cak strukture, 2010 Radonić V., Stojanović G., Crnojević-Bengin V.: Laboratorijski prototip fraktalne antene na fleksibilnoj podlozi za rad u UMTS opsegu učestanosti, rađeno za: Stellenbosch University, korisnik: Fakultet tehničkih nauka u Novom Sadu, 2011 Đurić S., Stojanović G., Damnjanović M., Laboure E.: Karakterizacija i analiza rada jednostavnih planarnih magnetnih komponenti, 2013 Dakić B., Samardžić N., Stojanović G.: Sistem za akviziciju signala sa 2D kapacitivne matrice, 2014 Kitić G., Savić S., Radonić V., Janković N., Birgermajer S., Čeljuska N., Marjanović S., Crnojević-Bengin V., Stojanović G.: Nova laboratorijska metoda za električnu karakterizaciju nikl manganitnih prahova u opsegu visokih učestanosti, 2016 Lečić N., Đurić S., Radovanović M., Stojanović G.: Prototip višefaznog spregnutog induktora sa feritnim jezgrom, 2016 Nikola L., Đurić S., Radovanović M., Stojanović G.: Prototip elektronskog kola za testiranje višefaznih spregnutih induktora, 2016 Radovanović M., Stojanović G., Malešev M., Radonjanin V.: Metoda za merenje koncentracije vlage u građevinskim materijalima korišćenjem bežičnog LC senzora, 2016 Radovanović M., Cvejin K., Mojić Lante B., Srdić V., Stojanović G.: Metoda za merenje temperature vazduha korišćenjem bežičnog senzora, 2016	11	22.00
M87	Prijava domaćeg patenta Prijava domaćeg patenta Stojanović G., Radovanović M., Sinha A., Simić M., Stavrakis A.: Капацитивни сензор са везеним електродама и осетљивим слојем на заштитној маски за лице (П-2021/1394), 2021 Stojanović G., Stavrakis A., Simić M., Radovanović M.: Отпорнички грејач са везеним електродама на заштитној масци за лице (П-2022/0584), 2022	2	1.00
M92	Registrovan patent, soj, sorta ili rasa, arhitektonsko, građevinsko ili urbanističko autorsko delo Registrovan patent, soj, sorta ili rasa, arhitektonsko, građevinsko ili urbanističko autorsko delo Kojić S., Ajkalo S., Stojanović G., Gužvica M., Vasiljević D., Radovanović M.: Metod i sistem za senzorski podržano inteligentno praćenje stanja objekta na polici, Beograd, Glasnik intelektualne svojine, 2014, str. 18-19, ISBN 2217-9143 Radovanović M., Stojanović G., Kojić S.: VIŠESLOJNI MIKROFLUIDNI INDUKTOR MULTILAYER MICROFLUIDIC INDUCTOR, Beograd, Zavod za patente, 2021, str. 1-16, UDK: P-2019/0814	2	24.00