Prezime:	Stankovski
Ime:	Stevan
APVNT broj:	337
Organizacija:	Fakultet tehničkih nauka u Novom Sadu

Produkcija - zbirni rezultati
Oznaka	Naziv kriterijuma produkcije	Broj	Poena
		354	785.00
M13	Monografska studija/poglavlje u knjizi M11 ili rad u tematskom zborniku vodećeg međunarodnog značaja Monografska studija/poglavlje u knjizi M11 ili rad u tematskom zborniku vodećeg međunarodnog značaja Sarang S., Stojanović G., Stankovski S.: Toward Real‐Time Water Quality Monitoring Using Wireless Sensor Networks, Washington, DC, John Wiley & Sons, Inc., 2023, str. 283-303	1	6.00
M14	Monografska studija/poglavlje u knjizi M12 ili rad u tematskom zborniku međunarodnog značaja Monografska studija/poglavlje u knjizi M12 ili rad u tematskom zborniku međunarodnog značaja Stankovski S., Ostojić G., Lazarević M.: Chapter 14: RFID technology in product lifecycle management, In: Engineering the Future, Bombay, Scyio, 2010, str. 281-296, ISBN 978-953-307-210-4 Stankovski S., Ostojić G.: Challenges in Implementation of Automated Identification Technology, Chapter X in Industrial Engineering – Challenges for the Future, Novi Sad, Faculty of Technical Sciences, 2013, str. 195-214, ISBN 978-3-902734-00-6 Stankovski S., Ostojić G.: Challenges in Implementation of Automated Identification Tachnology, DAAAM International Scientific Book 2013, Vienna, DAAAM International Publishing, 2013, str. 53-74, ISBN 978-3-901509-94-0	3	12.00
M21	Rad u vrhunskom međunarodnom časopisu Rad u vrhunskom međunarodnom časopisu Gajić G., Stankovski S., Ostojić G., Tešić Z., Miladinović Lj.: Method of evaluating the impact of ERP implementation critical success factors – a case study in oil and gas industries (DOI:10.1080/17517575.2012.690105), Enterprise Information Systems, 2014, Vol. 8, No. 1, pp. 84-106, ISSN 1751-7575 Tarjan L., Šenk I., Tegeltija S., Stankovski S., Ostojić G.: A readability analysis for QR code application in a traceability system (DOI: 10.1016/j.compag.2014.08.015), Computers and Electronics in Agriculture, 2014, Vol. 109, No. November, pp. 1-11, ISSN 0168-1699 Prodanović R., Rančić D., Vulić I., Zorić N., Bogićević D., Ostojić G., Sarang S., Stankovski S.: Wireless Sensor Network in Agriculture: Model of Cyber Security, Sensors, 2020, Vol. 20, No. 6747, pp. 1-22, ISSN 1424-8220 Dong Y., Fu Z., Stankovski S., Wang S., Li X.: Nutritional Quality and Safety TraceabilitySystem for China’s Leafy Vegetable SupplyChain Based on Fault Tree Analysis and QR Code, IEEE Access, 2020, Vol. 8, No. 2020, pp. 261-275, ISSN 2169-3536 Prodanović R., Sarang S., Rančić D., Vulić I., Stojanović G., Stankovski S., Ostojić G., Baranovski I., Maksović D.: Trustworthy Wireless Sensor Networks for MonitoringHumidity and Moisture Environments (https://doi.org/10.3390/s21113636), Sensors, 2021, Vol. 21, No. 3636, pp. 1-24, ISSN 1424-8220 Baranovski I., Stankovski S., Ostojić G., Nikolić V., Simonović M., Stanojević M.: TOWARD A SMART ECOSYSTEM WITH AUTOMATED SERVICES (DOI: 10.22190/FUME220525033B), Facta universitatis - series: Mechanical Engineering, 2022, ISSN 0354–2025 Lužanin O., Gudurić V., Bernhardt A., Movrin D., Damjanović-Vasilić Lj., Terek P., Ostojić G., Stankovski S.: Impact of In-Process Crystallinity of Biodegradable Scaffolds Fabricated by Material Extrusion on the Micro- and Nanosurface Topography, Viability, Proliferation, and Differentiation of Human Mesenchymal Stromal Cells (https://doi.org/10.3390/polym15061468), Polymers, 2023, Vol. 15, No. 1468, ISSN 2073-4360 Zhang X., Li Y., Hong T., Tegeltija S., Babić M., Wang X., Ostojić G., Stankovski S., Marinković D.: Response Characteristics Study of Ethylene Sensor for Fruit Ripening under Temperature Control (DOI: https://doi.org/10.3390/s23115203), Sensors, 2023, Vol. 23, No. 11, ISSN 1424-8220 Kevrešan Ž., Mastilović J., Kukolj D., Ubiparip Samek D., Kovač R., Đerić M., Bajić (Jakšić) A., Ostojić G., Stankovski S.: Insights from a Patent Portfolio Analysis on Sensor Technologies for Measuring Fruit Properties, Horticulturae, 2024, Vol. 10, No. 1, ISSN 2311-7524	9	72.00
M21a	Rad u međunarodnom časopisu izuzetnih vrednosti Rad u međunarodnom časopisu izuzetnih vrednosti Ostojić G., Stankovski S., Ratković Ž., Miladinović Lj., Maksimović R.: Development of Hydro Potential in Republic Srpska (doi: 10.1016/j.rser.2013.07.036), Renewable and Sustainable Energy Reviews, 2013, Vol. 28, No. Dec, pp. 196-203, ISSN 1364-0321 Zhang G., Liu X., Fu Z., Stankovski S., Dong Y., Li X.: Precise measurements and control of the position of the rolling shutter and rolling film in a solar greenhouse, Journal of Cleaner Production, 2019, ISSN 0959-6526 Mu W., Gong S., Stankovski S., Zhang X., Kaninska R., Feng J.: WebGIS-based suitability evaluation system for Chinese table grape production, Computers and Electronics in Agriculture, 2019, Vol. 165, No. 10, pp. 1-9, ISSN 0168-1699 Bai X., Fu Z., Stankovski S., Wang X., Li X.: A three-dimensional threshold algorithm based on histogram reconstruction and dimensionality reduction for registering cucumber powdery mildew, Computers and Electronics in Agriculture, 2019, Vol. 158, No. 3, pp. 211-218, ISSN 0168-1699 Xuebing B., Zetian F., Nan L., Stankovski S., Xiaoshuan Z., Xinxing L.: Water environmental nexus-based quality and safety risk assessment for fish (Carassius auratus) in aquaculture, Journal of Cleaner Production, 2021, Vol. 288, ISSN 0959-6526 Jinchao X., Ruiqin M., Stankovski S., Xue L., Xiaoshuan Z.: Intelligent Dynamic Quality Prediction of Chilled Chicken with Integrated IoT Flexible Sensing and Knowledge Rules Extraction , Foods, 2022, ISSN 2304-8158 Mastilović J., Kevrešan Ž., Kukolj D., Kovač R., Ubiparip Samek D., Stankovski S., Ostojić G., Đerić M.: Sensors in postharvest technologies: Evidence from patent portfolio analysis, Postharvest Biology and Technology, 2024, Vol. 208, No. 112628, pp. 1-14, ISSN 0925-5214	7	70.00
M22	Rad u istaknutom međunarodnom časopisu Rad u istaknutom međunarodnom časopisu Maksimović R., Stankovski S., Ostojić G., Petrović S., Ratković Ž.: Complexity and Flexibility of Production Structures, Journal of Scientific and Industrial Research, 2010, Vol. 69, No. 2, pp. 101-105, ISSN 0022-4456 Stankovski S., Tarjan L., Oros D., Ostojić G., Šenk I.: Using a Didactic Manipulator in Mechatronics and Industrial Engineering Courses, IEEE Transactions on Education, 2010, Vol. 53, No. 4, pp. 572-579, ISSN 0018-9359 Lazarević M., Ostojić G., Ćosić I., Stankovski S., Vukelić Đ., Zečević I.: Product lifecycle management (PLM) methodology for product tracking based on radio-frequency identification (RFID) technology, Scientific Research and Essays, 2011, Vol. 6, No. 22, pp. 4776-4787, ISSN 1992-2248 Miladinović Lj., Popkonstantinović B., Stoimenov M., Petrović D., Ostojić G., Stankovski S.: Laser inspection of rubber profiles, Scientific Research and Essays, 2011, Vol. 6, No. 16, pp. 3431-3436, ISSN 1992-2248 Ostojić G., Tadić B., Lužanin O., Stankovski S., Vukelić Đ., Budak I., Miladinović Lj.: An integral system for automated cutting tool selection, Scientific Research and Essays, 2011, Vol. 6, No. 15, pp. 3240-3251, ISSN 1992-2248 Janković J., Petrović N., Miladinović Lj., Popkonstantinović B., Stoimenov M., Petrović D., Ostojić G., Stankovski S.: Computer Simulation of Fast Hydraulic Actuators, Iranian Journal of Science and Technology, Transactions B, 2012, Vol. 36, No. M1, pp. 95-106, ISSN 1028-6284 Stankovski S., Ostojić G., Šenk I., Rakić-Skoković M., Trivunović S., Kučević D.: Dairy cow monitoring by RFID, Scientia Agricola, 2012, Vol. 69, No. 1, pp. 75-80, ISSN 0103-9016 Popkonstantinović B., Miladinović Lj., Obradović M., Ostojić G., Stankovski S.: Mathematical Principles and Optimal Design Solutions to Compensation for the Pendulum Temperature Dilatation, Acta Polytechnica Hungarica, Journal of Applied Sciences, 2013, Vol. 10, No. 8, pp. 117-128, ISSN 1785-8860 Andrejević R., Šiniković G., Stojićević M., Stoimenov M., Miladinović Lj., Popkonstantinović B., Ostojić G., Stankovski S.: A novel walker with mechanically established walking and standing mechanism, Tehnički vjesnik - Technical Gazette, 2013, Vol. 20, No. 6, pp. 927-931, ISSN 1330-3651, UDK: 531.133:681.5:615.825 Šenk I., Ostojić G., Jovanović V., Tarjan L., Stankovski S.: Experiences in developing labs for a supervisory control and data acquisition course for undergraduate mechatronics education, DOI:10.1002/cae.21578, Computer Applications in Engineering Education, 2015, Vol. 23, No. 1, pp. 54-62, ISSN 1061-3773 Tegeltija S., Lazarević M., Stankovski S., Ćosić I., Todorović V., Ostojić G.: Heating Circulation Pump Disassembly Process Improved with Augmented Reality, Thermal Science, 2016, Vol. 20, No. 2, pp. 611-622, ISSN 0354-9836 Zečević I., Bjeljac P., Perišić B., Stankovski S., Venus D., Ostojić G.: Model driven development of hybrid databases using lightweight metamodel extensions, Enterprise Information Systems, 2018, Vol. 12, No. 8-9, pp. 1221-1238, ISSN 1751-7575 Liu H., Yanqing D., Stankovski S., Zhang X., Zhang J.: Development and evaluation of a brine mining equipment monitoring and control system using Wireless Sensor Network and fuzzy logic, Transactions of the Institute of Measurement and Control, 2018, Vol. 40, No. 6, pp. 2062-2081, ISSN 0142-3312 Stankovski S., Cui Y., He L., Mengjie Z., Jianying F., Xioashuan Z.: Improving Intelligence and Efficiency of Salt Lake Production by Applying a Decision Support System Based on IOT for Brine Pump Management, Electronics (Basel), 2018, ISSN 2079-9292 Kukolj D., Nemet S., Ostojić G., Stankovski S., Jovanović D.: Aggregation Framework for TSK Fuzzy and Association Rules: Interpretability Improvement on a Traffic Accidents Case, Applied Intelligence, 2019, Vol. 49, No. 11, pp. 3909-3922, ISSN 0924-669X Jocanović M., Agarski B., Karanović V., Orošnjak M., Ilić Mićunović M., Ostojić G., Stankovski S.: LCA/LCC Model for Evaluation of Pump Units in Water Distribution Systems, Symmetry, 2019, Vol. 11, No. 9, pp. 1-21, ISSN 2073-8994 Tarjan L., Šenk I., Erić Obućina J., Stankovski S., Ostojić G.: Extending Legacy Industrial Machines by a Low-Cost Easy-to-Use IoT Module for Data Acquisition (doi:10.3390/sym12091486), Symmetry, 2020, Vol. 12, No. 1486, pp. 1-16, ISSN 2073-8994 Sarang S., Stojanović G., Stankovski S., Trpovski Ž., Drieberg M.: Energy-Efficient Asynchronous QoS MAC Protocol for Wireless Sensor Networks, Wireless Communications and Mobile Computing, 2020, Vol. 2020, No. 8860371, pp. 1-13, ISSN 1530-8669 Jokić D., Lubura S., Ristović M., Stankovski S., Rajs V., Šiljak H.: What’s in the Box: Design of an Open Didactic Robot Environment, Electronics (Basel), 2020, Vol. 9, pp. 2090-2104, ISSN 2079-9292 Dejan J., Slobodan L., Milica R., Stankovski S., Rajs V., Harun Š.: What’s in the Box: Design of an Open Didactic Robot Environment, Electronics (Basel), 2020, Vol. 9, No. 12, ISSN 2079-9292 Oros D., Penčić M., Šulc J., Čavić M., Stankovski S., Ostojić G., Ivanov O.: Smart Intravenous Infusion Dosing System, Applied Sciences, 2021, Vol. 11, No. 2, pp. 1-26, ISSN 2076-3417, UDK: DOI: 10.3390/app11020513 Tegeltija S., Dejanović S., Feng H., Stankovski S., Ostojić G., Kučević D., Marjanović J.: Blockchain Framework for Certification of Organic Agriculture Production (DOI: 10.3390/su141911823 ), Sustainability, 2022, Vol. 14, No. 19, ISSN 2071-1050 Vulić I., Borisov M., Prodanović R., Rančić D., Petrović V., Stankovski S., Ostojić G.: Protection of Digital Elevation Model—One Approach (https://doi.org/10.3390/app12199898), Applied Sciences, 2022, Vol. 12, No. 19, ISSN 2076-3417 Xinxing L., Biao W., Tianhua X., Stankovski S.: Research progress on nondestructive testing technology for aquatic products freshness, Journal of Food Process Engineering, 2022, ISSN 0145-8876 Sarang S., Stojanović G., Drieberg M., Stankovski S., Bingi K., Jeoti V.: Machine Learning Prediction based Adaptive Duty Cycle MAC Protocol for Solar Energy Harvesting Wireless Sensor Networks, IEEE Access, 2023, pp. 17536-17554, ISSN 2169-3536 Protić D., Stanković M., Prodanović R., Vulić I., Stojanović G., Simić M., Ostojić G., Stankovski S.: Numerical Feature Selection and Hyperbolic Tangent Feature Scaling in Machine Learning-Based Detection of Anomalies in the Computer Network Behavior (https://doi.org/10.3390/electronics12194158), Electronics (Basel), 2023, Vol. 12, No. 19, pp. 1-20, ISSN 2079-9292 Antić V., Protić D., Stanković M., Prodanović R., Manić M., Ostojić G., Stankovski S., Kučević D.: Protecting Data at Risk of Unintentional Electromagnetic Emanation: TEMPEST Profiling, Applied Sciences, 2024, Vol. 14, No. 11, ISSN 2076-3417 Mandić J., Sremčev N., Piaux J., Vrhovac V., Kučević D., Stankovski S.: Streamlining Construction Operations: A Holistic Approach with A3 Methodology and Lean Principles, Buildings, 2024, Vol. 14, No. 8, ISSN 2075-5309	28	140.00
M23	Rad u međunarodnom časopisu Rad u međunarodnom časopisu Ostojić G., Lazarević M., Stankovski S., Ćosić I.: RFID Technology Application in Disassembly Systems , Strojniski vestnik - Journal of Mechanical Engineering, 2008, Vol. 54, No. 11, pp. 759-767, ISSN 0039-2480, UDK: 658.5 Stankovski S., Lazarević M., Ostojić G., Ćosić I., Purić R.: RFID Technology in Product/Part Tracking During the Whole Life Cycle , Assembly Automation, 2009, Vol. 29, No. 4, pp. 364-370, ISSN 0144-5154 Ostojić G., Stankovski S., Tarjan L., Šenk I., Jovanović V.: Development and Implementation of Didactic Sets in Mechatronics and Industrial Engineering Courses, International Journal of Engineering Education, 2010, Vol. 26, No. 1, pp. 2-8, ISSN 0949-149X Vukelić Đ., Ostojić G., Stankovski S., Lazarević M., Tadić B., Hodolič J., Simeunović N.: Machining fixture assembly/disassembly in RFID environment, Assembly Automation, 2011, Vol. 31, No. 1, pp. 62-68, ISSN 0144-5154 Popkonstantinović B., Miladinović Lj., Stoimenov M., Petrović D., Ostojić G., Stankovski S.: DESIGN, MODELLING AND MOTION SIMULATION OF THE REMONTOIRE MECHANISM, Transactions of Famena, 2011, Vol. 35, No. 2, pp. 79-93, ISSN 1333-1124, UDK: 621.9.06:531.43:007.52 Stankovski S., Ostojić G., Tarjan L., Oros D., Lazarević M.: IML Robot Grasping Process Improvement, Iranian Journal of Science and Technology, Transactions B, 2011, Vol. 35, No. M1, pp. 197-207, ISSN 1028-6284 Ostojić G., Stankovski S., Vukelić Đ., Lazarević M., Hodolič J., Tadić B., Odri S.: Implementation of automatic identification technology in a process of fixture assembly/disassembly, Strojniski vestnik - Journal of Mechanical Engineering, 2011, Vol. 57, No. 11, pp. 819-825, ISSN 0039-2480 Popkonstantinović B., Miladinović Lj., Stoimenov M., Petrović D., Petrović N., Ostojić G., Stankovski S.: Practical method for thermal compensation of long-period compound pendulum, Indian Journal of Pure and Applied Physics, 2011, Vol. 49, No. 10, pp. 657-664, ISSN 0019-5596 Oros D., Baranovski I., Dragičević D., Stankovski S., Ostojić G., Miladinović Lj.: Development of Didactic Set of Pneumatics and Servo Pneumatics in Engineering Education, Transactions of Famena, 2012, Vol. 36, No. 3, pp. 69-79, ISSN 1333-1124 Popović B., Popović N., Mijić D., Stankovski S., Ostojić G.: Remote Control of Laboratory Equipment for Basic Electronics Courses: A LabVIEW-based Implementation DOI: 10.1002/cae.20531, Computer Applications in Engineering Education, 2013, Vol. 21, No. S1, pp. 110-120, ISSN 1061-3773 Dragičević D., Ostojić G., Tejić B., Tegeltija S., Stankovski S.: Development of Didactic Dosing System for Raw Materials in the Form of Granules, International Journal of Engineering Education, 2014, Vol. 30, No. 5, pp. 1313-1323, ISSN 0949-149X Stankovski S., Ostojić G., Đukić N., Tegeltija S., Milojković A.: Bluetooth Parking Access Control, Sensor Review, 2014, Vol. 34, No. 3, pp. 244-254, ISSN 0260-2288 Ostojić G., Jovanović V., Kozak D., Ivandić Ž., Stankovski S.: Mechatronic Education at Faculty of Technical Sciences Novi Sad, Tehnički vjesnik - Technical Gazette, 2015, Vol. 22, No. 3, pp. 805-812, ISSN 1330-3651 Lazarević M., Vukelić Đ., Stankovski S., Sremčev N., Ostojić G.: Enhancing Student Competence through Novel Student Enterprise Concept, International Journal of Engineering Education, 2017, Vol. 33, No. 6(A), pp. 1824-1833, ISSN 0949-149X Dong Y., Fu Z., Stankovski S., Peng Y., Li X.: A Cotton Disease Diagnosis Method Using a Combined Algorithm of Case-Based Reasoning and Fuzzy Logic , The Computer Journal (Online ISSN 1460-2067), 2020, No. 0, pp. 1-14, ISSN 0010-4620	15	45.00
M31	Predavanje po pozivu sa međunarodnog skupa štampano u celini Predavanje po pozivu sa međunarodnog skupa štampano u celini Stankovski S., Ostojić G.: Impact of Identification Technology to Control and Management Systems, 10. Triennial International SAUM Conference on Systems, Automatic Control and Measurements, Niš, 10-12 November, 2010, pp. 236-245, ISBN 978-86-6125-020-0 Ostojić G., Stankovski S.: Correlation of RFID technology and Ubiquitous Sensor Network, 15. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Faculty of Technical Sciences, 14-16 September, 2011, pp. 120-125, ISBN 978-86-7892-341-8 Ostojić G., Stankovski S.: Radio Frequency Identification vs. Near Field Communication, 11. International Conference on Systems, Automatic Control and Measurements SAUM, Niš: Faculty of Electronical Engineering, Faculty of Mechanical Engineering, 14-16 November, 2012, pp. 335-338, ISBN 978-86-6125-072-9 Ostojić G., Stankovski S.: The Application of Wireless Sensor Networks in Water Resources Management, 4. International Conference Life Cycle Engineering and Management - ICDQM, Beograd, 27-28 June, 2013, pp. 88-93, ISBN 978-86-86355-15-7 Stankovski S., Ostojić G., Zhang X.: Influence of Industrial Internet of Things on Mechatronics, 3. International Conference Mechanical Engineering in XXI Century - MASING, Niš: University of Niš, 17-18 September, 2015, pp. 19-24, ISBN 978-86-6055-072-1 Stankovski S., Ostojić G.: Toward Smart Ecosystem in Industrial Automation, 15. International Conference on Systems, Automatic Control and Measurements SAUM, Niš: University of Niš, Faculty of Electronic Engineering, Faculty of Mechanical Engineering, 9-10 September, 2021, pp. 5-8, ISBN 978-86-6125-243-3	6	18.00
M33	Saopštenje sa međunarodnog skupa štampano u celini Saopštenje sa međunarodnog skupa štampano u celini ***Stanivuković D., Šešlija D., Stankovski S.: A contribution to development of an expert system for diagnostics and maintenance of industrial robots Naziv skupa: Second Intl. Conf. on the Robotics - Nije povezan skup**greska** Zelenović D., Ćosić I., Milić D., Stankovski S.: A contribution to the development of computer aided process planning in assembly (APOTEP M), 2. International Conference on Advanced Manufacturing System and Technology AMST, Trento, 19-21 June, 1990 ***Borovac B., Šešlija D., Stankovski S.: GENERALIZED APPROACH TO THE CONTROL OF ASSEMBLY PROCESS USING TACTILE SENSORS AND GRIPPERS WITH SOFT FINGERS Naziv skupa: Proceedings of International Conference CARS and FOF - Nije povezan skup**greska** ***Šešlija D., Stankovski S., Borovac B.: INTELLIGENT ROBOTIC ASSEMBLY CELL IN CIM ENVIRONMENT Naziv skupa: Proceedings of International Conference CARS and FOF - Nije povezan skup**greska** ***Borovac B., Stankovski S., Šešlija D.: EXPERT SYSTEM AS AN INTELLIGENT SUPPORT FOR ASSEMBLY REALIZATION Naziv skupa: Proc. of IMACS/SICE International Symposium on Robotics, Mechatronics and Manufacturing Systems - Nije povezan skup**greska** ***Stankovski S., Ćosić I., Borovac B., Šešlija D.: A CONTRIBUTION TO THE DEVELOPMENT OF KNOWLEDGE BASED-SYSTEMS FOR GRASPING IN ROBOTIC ASSEMBLY Naziv skupa: Proc. of Simposion National Roboti Industriali - Nije povezan skup**greska** Borovac B., Šešlija D., Stankovski S.: Soft sensored grippers in assembly process, 2. IEEE International Conference on Robotics and Automation, Nice: IEEE Computer Society Press, 12-14 May, 1992, pp. 1283-1288, ISBN 0-8186-2720-4 ***Borovac B., Šešlija D., Stankovski S.: Investigation of basic characteristics of force sensing resistor sensors for robotic hands Naziv skupa: Proc. of Third Interrnational Symposium on Measurement and Control in Robotics ISMCR '93 - Nije povezan skup**greska** Ćosić I., Warschat J., Stankovski S., Anišić Z.: A contribution to the development of an expert system for assembly system design, 12. International Conference on Production Research - ICPR, Lappeeranta: Elsevier Science Publishers, 16 August, 1993, pp. 377-378 Borovac B., Šešlija D., Stankovski S.: Vrednovanje sposobnosti hvatanja robotskih hvataljki, 5. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: FTN, Institut za proizvodno mašinstvo, 8-9 June, 1994, pp. 67-72 Šešlija D., Stankovski S., Borovac B.: Prilog istraživanju povratne sprege po sili u slučaju robotizovane montaže, 5. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: FTN, Institut za proizvodno mašinstvo, 8-9 June, 1994, pp. 649-654 Stankovski S., Šešlija D., Borovac B.: Određivanje dubine hvatanja sa antropomorfnim robotskim hvataljkama, 5. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: FTN, Institut za proizvodno mašinstvo, 8-9 June, 1994, pp. 627-632 Borovac B., Nađ L., Šešlija D., Stankovski S., Šabli M.: Development and application of sensors with soft contact surfaces, 10. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Institut za idnustrijske sisteme, Fakultet tehničkih nauka, 1-3 October, 1996, pp. 193-208 Stankovski S., Tomović R., Borovac B., Dudić S., Jefić B.: An investigation of human grasping process, 3. International Conference on Advanced Robotics, Intelligent Automation and Active Systems, Bremen, 15-17 September, 1997, pp. 295-300, ISBN 86-7236-008-7 Popović B., Stankovski S., Šešlija D.: Automatizacija mašina za pakovanje, 1. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet Istočno Sarajevo, 12-14 March, 2001, pp. 21-27 Ostojić G., Stankovski S.: System of Automation in Residental Environments , 12. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Vrnjačka Banja: Fakultet tehničkih nauka u Novom Sadu, 22-23 November, 2002, pp. 69-74, ISBN 182503943, UDK: 658.5 Ostojić G., Stankovski S.: Data Security in Home Networks , 12. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Vrnjačka Banja: Fakultet tehničkih nauka u Novom Sadu, 22-23 November, 2002, pp. 265-270, ISBN 182503943, UDK: 658.5 Šešlija D., Stankovski S.: Automatizacija tehnoloških sistema u okruženju savremenih informacionih tehnologija , 2. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet, Srpsko Sarajevo, 25-27 March, 2002 Šešlija D., Stankovski S.: Distribuirana inteligencija za industrijske komunikacione mreže, 5. ICDQM, Beograd: Istraživački centar za upravljanje kvalitetom i pouzdanošću, 26-27 June, 2002, pp. 436-441 Tešić Z., Šešlija D., Stankovski S.: Integracija upravljanja radnih naloga i tehnoloških sistema, 12. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Vrnjačka Banja: Institut za industrijsko inženjerstvo i menadžment, 22-23 November, 2002, pp. 493-497, ISBN 182503943 Šešlija D., Odri S., Tešić Z., Stankovski S.: On the communication between machine and production control system, 4. International Scientific Conference UNITECH, Gabrovo: Technical university Gabrovo, 18-19 November, 2004, pp. 229-232, ISBN 954-304-5 Šešlija D., Tešić Z., Stankovski S., Odri S.: Razvoj radne liste za direktnu komunikaciju sa upravljačkim sistemom automatizovanog tehnološkog sistema, 4. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet, Srpsko Sarajevo, Republika Srpska, 23-25 March, 2005, ISBN 99938-624-2-8 Stankovski S., Šešlija D., Georgijević M.: RFID technology as an identification system in automation and logistics, 13. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Herceg Novi: Institut za industrijsko inženjerstvo i menadžment, FTN, 7-9 September, 2005, pp. 249-253, ISBN 86-7780-008-5 Konjević P., Ostojić G., Stankovski S.: Bus Systems in Residental Environments , 13. Industrijski sistemi, Herceg Novi: Faculty of Technical Sciences, 7-9 September, 2005, pp. 221-230, ISBN 86-7780-008-5 Konjević P., Ostojić G., Stankovski S.: Intelligent Building Control , 2. II međunarodno savjetovanje“ Informatika u poslovnom i proizvodnom menadžmentu i kominikacijama – IPOM“, Teslić: Saobraćajno-tehnički fakultet Doboj,, 29-30 April, 2006, pp. 69-73, ISBN 99938-815-3-8 Ostojić G., Jovanović V., Stevanov B., Stankovski S., Ćosić I.: Collaborative Design in the Assembly Systems, 3. International CIRP Sponsored Conference on Digital Enterprise Technology, Setubal: Escola Superior de Technologia, Portugal, 8-20 September, 2006, pp. 185-193, ISBN 972-99824-1-4 Lazarević M., Ostojić G., Jovanović V., Stankovski S.: Implementation of RFID Technology in Disassembly Systems, 2. International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV), Toronto: Intelligent Manufacturing Systems (IMS) Centre, University of Windsor, Canada, 22-24 June, 2007, pp. 1191-1200, ISBN 978-0-9783187-0-3 Ostojić G., Stankovski S., Lazarević M.: Implementation of RFID Technology in Parking Lot Access Control System, 1. IEEE RFID Eurasia, Istambul: Istanbul Technical University, Istanbul, 5-6 September, 2007, pp. 49-53, ISBN 978-975-01566-0-1 Lazarević M., Ostojić G., Rakić-Skoković M., Ćosić I., Stankovski S.: Product disassembly quality according to selection scenario, 1. 1st European DAAAM International Young Researcher´s and Scientist´s Conference, Zadar: University of Zadar, 2007, pp. 419-421, ISBN 1726-697976 Rakić-Skoković M., Ostojić G., Lazarević M., Stankovski S.: IMPROVING BUSINESS PROCESSES WITH RFID TECHNOLOGY , Annals of DAAAM, 2008, Vol. 19, No. 1, pp. 1167-1168, ISSN 1726-9679, 19. DAAAM International Symposium, Trnava: DAAAM International Vienna, 22-25 October, 2008, pp. 1167-1168, ISBN 978-3-901509-68-1 Stankovski S., Škrinjar D., Baranovski I., Lazarević M., Purić R.: CHALLENGE OF AUTOMATION IN PACKAGING AND RFID TECHNOLOGY , 14. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: UNIVERZITET U NOVOM SADU - FAKULTET TEHNIČKIH NAUKA DEPARTMAN ZA INDUSTRIJSKO INŽENJERSTVO I MENADŽMENT, 2-3 October, 2008, pp. 183-187, ISBN 978 – 86 – 7892 – 13 Ostojić G., Stankovski S., Rakić-Skoković M., Lazarević M., Jovanović V.: Building automation with the Usage of RFID Technology for the User Identification, 14. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Faculty of Technical Sciences, 2-3 October, 2008, pp. 277-282, ISBN 978–86–7892–135-3 Stankovski S., Ostojić G., Rakić-Skoković M., Plavšić M., Trivunović S.: Basic elements of RFID systems for cattle farms, 14. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Faculty of Technical Sciences, 2-3 October, 2008, pp. 179-182, ISBN 978–86–7892–135-3 Maksimović R., Stankovski S., Mitrović V.: APPLIANCE OF "BALANCED SCORECARD" METODOLOGY IN SMALL ENTERPRISE, 7. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: INFOTEH, 26-28 March, 2008, pp. 280-284, ISBN 99938-624-2-8 Rakić-Skoković M., Ostojić G., Lazarević M., Stankovski S., Krsmanović C.: Processing and managing RFID data in large-scale applications , 14. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Faculty of Technical Sciences, 2-3 October, 2008, pp. 271-276, ISBN 978–86–7892–135-3 Rakić-Skoković M., Ostojić G., Lazarević M., Stankovski S.: APPLYING RFID TECHNOLOGY IN LOGISTICS, 13. Strategic Management and decision support systems in strategic Management, Subotica: Ekonomski fakultet Subotica, 15-16 May, 2008, ISBN 86-7233-193-1 Gogolak L., Pletl S., Stankovski S., Ónozó V.: Web upravljanje električnih potrošača, 32. Kongres o hidropneumatičkoj automatizaciji - HIPNEF, Vrnjačka Banja: Savez mašinskih i elektrotehničkih inženjera i tehničara srbije, 14-16 October, 2009, pp. 259-265, ISBN 978-86-80587-87-5 Ostojić G., Jovanović V., Stankovski S., Lazarević M.: RFID Product and Part Tracking for the Preventive Maintenance, 4. ASME International Manufacturing Science and Engineering Conference (MSEC), West Lafayette: American Society of Mechanical Engineeris (ASME), 4-7 October, 2009, ISBN 978-0-7918-3859-4 Stankovski S., Đukić N., Tegeltija S., Kovač R., Baranovski I.: Wireless Parking Access Control, 15. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: University of Novi Sad - Faculty of Technical Sciences, Department of Industrial Engineering and Management, 14-16 September, 2011, pp. 136-139, ISBN 978-86-7892-341-8 Oros D., Dragičević D., Stankovski S., Ostojić G., Horvat S.: Didactic Model of Servo Pneumatic System, 15. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: University of Novi Sad - Faculty of Technical Sciences, Department of Industrial Engineering and Management, 14-16 September, 2011, pp. 156-159, ISBN 978-86-7892-341-8 Šenk I., Ostojić G., Tarjan L., Stankovski S., Lazarević M.: Lean technology in food processing industry, 1. International Scientific Conference on Lean Technologies (LeanTech), Novi Sad: Faculty of Technical Sciences, Department of Industrial Engineering and Management, 13-14 September, 2012, pp. 43-48, ISBN 978-86-7892-445-3, UDK: 62-05(082) Lazarević M., Stankovski S., Ostojić G., Šenk I., Tarjan L.: Tracing Work Quality in LEAN cell with RFID Technology, 1. International Scientific Conference on Lean Technologies (LeanTech), Novi Sad: Faculty of Technical Sciences, Department of Industrial Engineering and Management, 13-14 September, 2012, pp. 77-83, ISBN 978-86-7892-445-3, UDK: 62-05(082) Šenk I., Ostojić G., Tarjan L., Stankovski S., Lazarević M.: Food Product Traceability by Using Automated Identification Technologies, 4. Doctoral Conference on Computing, Electrical and Industrial Systems DoCEIS, Lisabon: Springer, 15-17 April, 2013, pp. 155-163, ISBN 978-3-642-37290-2 Stankovski S., Ostojić G.: Improving Cooperation Between Universities and Industry, 5. International Symposium on Project Approaches in Engineering Education - PAEE, Eindhoven: University of Minho, 8-9 July, 2013, pp. 171-176, ISBN 978-989-8525-21-5 Jokić D., Lubura S., Stankovski S.: Development of a New Controller with FPGA for PUMA 560 Robot, 12. IFAC Conference on Programmable Devices and Embedded Systems, Ostrava: International Federation of Automatic Control, 25-27 September, 2013, pp. 161-166, ISBN 978-3-902823-53-3 Tarjan L., Šenk I., Ostojić G., Stankovski S., Gogolak L.: Application of FPGA Technology and a Real-Time Controller for Automatic Regulation of Rapidly Changing Variables, 2. Regional Conference - Mechatronics in Practice and Education (MECHEDU), Subotica: Subotica Tech - College of Applied Sciences, 5-6 December, 2013, pp. 125-128, ISBN 978-86-7892-565-8, UDK: 007.5 (082) Ljubinković N., Majstorović N., Đukić N., Ostojić G., Stankovski S.: Software Structure in Drinkomat Vending Machine, 2. Regional Conference - Mechatronics in Practice and Education (MECHEDU), Subotica: Subotica Tech - College of Applied Sciences, 5-6 December, 2013, pp. 45-47, ISBN 978-86-7892-565-8, UDK: 007.5(082) Ostojić G., Stankovski S., Tejić B., Tegeltija S., Đukić N.: Design and Application of Quadcopter, 16. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: University of Novi Sad - Faculty of Technical Sciences, Department of Industrial Engineering and Management, 15-17 October, 2014, pp. 63-68, ISBN 978-86-7892-652-5 Jokić D., Lubura S., Stankovski S.: Innovative approach to programming of robot PUMA 560, 16. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad, 15-17 October, 2014, pp. 95-100 Tegeltija S., Tejić B., Đukić N., Ostojić G., Stankovski S.: System for assistance during evacuation process, 7. PSU-UNS International Conference on Engineering and Technology - ICET, Phuket: Prince of Songkla University, Faculty of Engineering, 19-20 June, 2015, pp. 167-170 Tegeltija S., Lazarević M., Stankovski S., Ostojić G.: Implementing Augmented Reality in Disassembly Process, 7. PSU-UNS International Conference on Engineering and Technology - ICET, Phuket: Prince of Songkla University, Faculty of Engineering, 19-20 June, 2015, pp. 88-91 Stankovski S., Ostojić G.: One View How to Boost Knowledge Transfer from University to Industry in Serbia, 1. WBCInno International conference, Novi Sad: University of Novi Sad, 18 September, 2015, pp. 26-29, ISBN 978-86-499-0203-9 Reljić V., Tarjan L., Stankovski S., Lazarević M., Ostojić G.: Food Product Shelf-Life Prediction, 6. International Symposium on Industrial Engineering (SIE), Beograd: Faculty of Mechanical Engineering, Belgrade, 24-25 September, 2015, pp. 326-329, ISBN 978-86-7083-864-2 Đukić N., Tejić B., Tegeltija S., Stankovski S., Kukolj D., Ostojić G.: IMPLEMENTATION OF FIWARE IN INTERNET OF FIELDS, 7. International Scientific and Expert Conference TEAM, Beograd: Faculty of mechanical Engineering Belgrade, 14-16 October, 2015, pp. 391-396 Beg I., Tejić B., Baranovski I., Oros D., Ostojić G., Stankovski S.: Banking kiosk‘s stamping sub-system realization, 3. Regional Conference - Mechatronics in Practice and Education (MECHEDU), Subotica, 14-16 May, 2015, pp. 6-9 Erić Obućina J., Čajetinac S., Stankovski S., Ostojić G.: Modern Solutions Management Capacity Hydraulic Pumps Using Frequency Regulation, 13. International Conference on Systems, Automatic Control and Measurements SAUM, Niš: Faculty of Electronic Engineering, University of Niš, 9-11 November, 2016, pp. 1-4 Ostojić G., Tegeltija S., Lazarević M., Oros D., Stankovski S.: Implementation of IoT and FIWARE in Production Systems, 13. International Conference on Systems, Automatic Control and Measurements SAUM, Niš: Faculty of Electronic Engineering, University of Niš, 9-11 November, 2016, pp. 1-4 Ostojić G., Stankovski S., Trivunović S., Kučević D., Xiaoshuan Z.: Implementation of Internet of Things for Animal Identification, Radovi poljoprivrednog fakulteta Univerziteta u Sarajevu, 2016, Vol. 66, No. 2, pp. 145-152, ISSN 0033-8583, 7. Balkan conference on animal science balnimalcon, Sarajevo: Faculty of Agriculture and Food Sciences University of Sarajevo, 3-6 June, 2015, pp. 145-152, UDK: 63/66 (058)0808.1/2 Kukolj S., Mastilović J., Kevrešan Ž., Ostojić G., Stankovski S.: Comparative analysis of apple quality monitoring methods in computer vision, 8. International Scientific and Expert Conference TEAM, Trnava, 19-21 October, 2016, pp. 292-296, ISBN 978–80–8096–237-1 Bjeljac P., Đukić N., Tegeltija S., Stankovski S., Ostojić G.: IoT–Based Information Systems in Seed-to-Fork Food Production, 7. International Conference on Information Science and Technology (ICIST), Kopaonik: Society for Information Systems and Computer Networks, 12-15 March, 2017, pp. 70-74, ISBN 978-86-85525-19-3 Erić Obućina J., Stankovski S., Savić V., Ostojić G., Čajetinac S.: ENERGY SAVINGS USING FREQUENCY REGULATION IN THE HYDRAULIC SYSTEM WITH A PUMP OF CONSTANT DISPLACEMENT AUTOMOTIVE AND TRAFFIC ENGINEERING , 13. International Conference on Accomplishments in Mechanical and Industrial Engineering - DEMI, Banja Luka: FACULTY OF MECHANICAL ENGINEERING UNIVERSITY OF BANJA LUKA, 26-27 May, 2017, pp. 679-685, ISBN 978-99938-39-72-9 Tejić B., Đukić N., Tegeltija S., Ostojić G., Stankovski S.: IoT based system for monitoing food products, 17. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad, 4-6 October, 2017, pp. 194-197, ISBN 978-86-7892-978-6 Ostojić G., Stankovski S., Tegeltija S., Đukić N., Tejić B.: Implementation of IoT for food wastage minimisation, 17. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad, 4-6 October, 2017, pp. 116-121, ISBN 978-86-7892-978-6 Šenk I., Tarjan L., Oros D., Stankovski S., Ostojić G.: A Model for Indoor Product Localization Based on the Internet of Things, 17. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Faculty of Technical Sciences (Novi Sad). Department for Industrial Engineering and Management, 4-6 October, 2017, pp. 86-91, ISBN 978-86-7892-978-6 Vekić A., Borocki J., Stankovski S., Ostojić G.: Development of Innovation in Field of Precision Agriculture , 28. DAAAM International Symposium on Intelligent Manufacturing and Automation, Zadar: DAAAM International, 8-11 November, 2017, pp. 787-795, ISBN 978-3-902734- 1 Tegeltija S., Tejić B., Ostojić G., Baranovski I., Stankovski S.: A system for meal preparation instructions based on augmented reality, Session A1, 14. International Conference on Systems, Automatic Control and Measurements SAUM, Niš: University of Niš, Faculty of Electronic Engineering, 14-16 November, 2018, pp. 1-4 Arsenijević D., Stankovski S., Ostojić G., Baranovski I., Oros D.: An Overview of IoT Readiness Assessment Methods, 8. International Conference on Information Society and Technology – ICIST, Kopaonik, 11-14 March, 2018, pp. 48-53 Markov M., Stankovski S., Ostojić G., Baranovski I., Horvat S.: Application of Firebase Cloud Service for Storing and Analysing Data from IoT Mobile Devices, 4. International Conference Mechanical Engineering in XXI Century - MASING, Niš: University of Nis, 19-20 April, 2018, pp. 283-286 Ostojić G., Stankovski S., Tegeltija S., Tejić B., Baranovski I.: IoT Application in Agro-Industry, 9. International Scientific and Expert Conference TEAM, Novi Sad, 10-12 October, 2018, pp. 277-282, ISBN 978-86-6022-098-3 Kukolj D., Ostojić G., Stankovski S., Nemet S.: Software Based Analysis of Food Cooling Technology , 18. International Symposium INFOTEH-JAHORINA (INFOTEH), Jahorina: IEEE, 20-22 March, 2019, pp. 1-4 Stankovski S., Ostojić G., Zhang X., Baranovski I., Tegeltija S., Horvat S.: Mechatronics, Identification Tehnology, Industry 4.0 and Education DOI: 10.1109/INFOTEH.2019.8717775, 18. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: IEEE, 20-22 March, 2019, pp. 1-4 Nemet S., Kukolj D., Jovanović D., Ostojić G., Stankovski S.: Identification of Influencing Attributes for the Traffic Accident Severity Prediction Model, 7. Towards a humane city, Novi Sad, 6-7 December, 2019, pp. 389-394 Stankovski S., Ostojić G., Tarjan L., Stanojević M., Babić M.: Challenges of IOT Payments in Smart Services (DOI: 10.2507/30th.daaam.proceedings.001), 30. DAAAM International Symposium on Intelligent Manufacturing and Automation, Zadar: DAAAM International, 23-26 October, 2019, pp. 4-9, ISBN 978-3-902734-22-8 Babić M., Vekić A., Stanojević M., Ostojić G., Borocki J., Stankovski S.: Modern Parking Solutions for Smart Cities, 30. DAAAM International Symposium on Intelligent Manufacturing and Automation, Zadar, 23-26 October, 2019, pp. 1075-1083 Martinović A., Tarjan L., Šenk I., Tegeltija S., Stankovski S., Ostojić G.: A Blynk based system for remote process monitoring and control , 5. Regional Conference - Mechatronics in Practice and Education (MECHEDU), Subotica: Subotica Tech - College of Applied Sciences, 12 December, 2019, pp. 41-44, ISBN 978-86-918815-5-9 Tegeltija S., Ostojić G., Stankovski S., Kukolj D., Tejić B.: Food Delivery Using Cargo-Bikes with IoT, 25. IJCIEOM - International Joint Conference on Industrial Engineering and Operations Management, Novi Sad: Springer, Cham, 15-17 July, 2019, pp. 483-491, ISBN 978-3-030-43615-5 Stankovski S., Kukolj D., Ostojić G., Baranovski I., Nemet S.: Trends in Artificial Intelligence for Automated Industrial Systems, 5. International Conference Mechanical Engineering in XXI Century - MASING, Niš: UNIVERSITY OF NIŠ, 9 December, 2020, pp. 197-200, ISBN 978-86-6055-139-1, UDK: ISSN 2738-103X Tegeltija S., Ostojić G., Šenk I., Tarjan L., Stankovski S.: IoT-based delivery system in state of emergency, 18. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Springer, 7-9 October, 2020, ISBN in press Stankovski S., Ostojić G., Nićin M., Baranovski I., Tarjan L.: Edge Computing for Fault Detection in Smart Systems, 10. International Conference on Information Science and Technology (ICIST), Kopaonik: Information Society of Serbia - ISOS, 8-11 March, 2020, pp. 22-26, ISBN 978-86-85525-24-7 Stankovski S., Ostojić G., Šaponjić M., Stanojević M., Babić M.: Using micro/mini PLC/PAC in the Edge Computing Architecture ( DOI:10.1109/INFOTEH48170.2020.9066309), 19. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: IEEE Explore, 18-20 March, 2020, pp. 1-4 Stankovski S., Ostojić G., Baranovski I., Babić M., Stanojević M.: The Impact of Edge Computing on Industrial Automation ( DOI: 10.1109/INFOTEH48170.2020.9066341 ), 19. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: IEEE Explore, 18-20 March, 2020, pp. 1-4 Baranovski I., Stankovski S., Ostojić G., Horvat S.: Support for Self-service Automated Parking Systems (DOI: 10.1109/INFOTEH48170.2020.9066319), 19. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: IEEE Explore, 18-20 March, 2020, pp. 1-5 Tegeltija S., Radovanović M., Babić M., Stanojević M., Ostojić G., Stankovski S.: One Approach to the Detection of Illegal Occupation of Parking Spaces Reserved for Persons with Disabilities, 31. DAAAM International Symposium on Intelligent Manufacturing and Automation, Mostar, 21-24 October, 2020, pp. 650-655 Stankovski S., Ostojić G., Zhang X., Zečević I., Stanojević M.: Challenges with Edge Computing in Mechatronics Education, 20. International Symposium INFOTEH-JAHORINA (INFOTEH), Jahorina, 17-19 March, 2021 Stankovski S., Ostojić G., Lazarević M.: Edge Computing in IEM Education, 14. EPIEM Conference, Graz: Verlag der Technischen Universität Graz, 28 May, 2021, pp. 11-16, ISBN 978-3-85125-827-1 Stankovski S., Tegeltija S., Ostojić G., Baranovski I., Stanojević M., Babić M.: One Approach for Determining Availability of Parking Lots in Shared Parking for Disabled Person (DOI: 10.2507/32nd.daaam.proceedings.046), 32. DAAAM International Symposium on Intelligent Manufacturing and Automation, Vienna, 28-29 October, 2021, pp. 316-320 ***Dejanović S., Stankovski S., Croom D.: Using blockchain with biometric security to create a secure virtual world and e-identity- Nije povezan skup**greska** ***Dejanović S., Stankovski S.: Benefits of blockchain technology in agriculture- Nije povezan skup**greska** Stankovski S., Ostojić G., Baranovski I., Tegeltija S., Smirnov V.: Robust automation with PLC/PAC and edge controllers (DOI: 10.1016/j.ifacol.2022.06.052), 17. IFAC Conference on Programmable Devices and Embedded Systems, Sarajevo: Elsevier, 17-19 May, 2022, pp. 316-321 Mandić Z., Stankovski S., Ostojić G., Popović B.: Potential of Edge Computing PLCs in Industrial Automation (DOI: 10.1109/INFOTEH53737.2022.9751324), 21. International Symposium INFOTEH-JAHORINA (INFOTEH), Jahorina: IEEE, 16-18 March, 2022, pp. 1-5 Erić Obućina J., Stankovski S., Ostojić G., Aleksandrov S.: Modeling аnd Simulation of the Hydraulic System with Installing a Frequency Converter, 16. International Conference on Systems, Automatic Control and Measurements SAUM, Niš, 17-18 November, 2022, pp. 103-106 Sarang S., Stojanović G., Drieberg M., Stankovski S., Jeoti V.: Energy Neutral Operation based Adaptive Duty Cycle MAC Protocol for Solar Energy Harvesting Wireless Sensor Networks, 95. IEEE Vehicular Technology Conference VTC, Helsinki, 19-22 June, 2022 Babić M., Stanojević M., Ostojić G., Tegeltija S., Stankovski S.: INDUSTRIAL CYBER SECURITY ASPECTS IN ICS APPLICATIONS, 33. DAAAM International Symposium on Intelligent Manufacturing and Automation, Vienna: DAAAM International, 27-28 October, 2022, pp. 326-331, ISBN 978-3-902734-36-5 Tegeltija S., Ostojić G., Tejić B., Stanojević M., Stankovski S., Lubura S., Kukrić N.: One Solution of Low-Cost Modular Control Device based on IoT, 22. International Symposium INFOTEH-JAHORINA (INFOTEH), Jahorina: IEEE, 15-17 March, 2023 Kukolj D., Mastilović J., Kevrešan Ž., Kovač R., Ostojić G., Stankovski S., Nemet S.: Trends and Applications in Patent Databases for the Blockchain Technology on Use Case : Products Traceability in Food Supply Chain, 22. International Symposium INFOTEH-JAHORINA (INFOTEH), Jahorina: IEEE, 15-17 March, 2023, pp. 1-4 Stankovski S., Ostojić G.: TRACEABILITY IN AGRI-FOOD PRODUCTION AND SUPPLY CHAINS, 19. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad, 5-6 October, 2023 Stankovski S., Ostojić G., Tegeltija S., Stanojević M., Babić M., Zhang X.: Generative AI Applications and Tools in Engineering Education, 23. International Symposium INFOTEH-JAHORINA (INFOTEH), Jahorina, 20-22 March, 2024, pp. 1-4 Stankovski S., Ostojić G.: DEVELOPMENT OF TASKS FOR TRAINING IN PLC PROGRAMMING USING GENERATIVE ARTIFICIAL INTELLIGENCE, 7. International Scientific Conference "Conference on Mechanical Engineering Technologies and Applications" - COMETa, Istočno Sarajevo, 14-16 November, 2024, pp. 173-181 Tegeltija S., Šenk I., Tarjan L., Ostojić G., Stankovski S.: One solution of low-cost LoRa based IoT modular control device, 1. Future-BME Conference, Novi Sad: Faculty of Technical Sciences, University of Novi Sad (Serbia), 30-31 October, 2024, pp. 699-706, ISBN 978-86-6022-723-4, UDK: (https://doi.org/10.24867/FUTURE-BME-2024-079), ISSN 3042-2868	99	99.00
M34	Saopštenje sa međunarodnog skupa štampano u izvodu Saopštenje sa međunarodnog skupa štampano u izvodu Radišić M., Ferenčak M., Stanišić I., Stankovski S., Dobromirov D.: Harmonization of the Republic of Serbia tax system with the tax system of the European Union, 8. Augustin Cournot Doctoral Days, Strasbourg: University of Strasbourg, 13-15 April, 2011, pp. 15-15 Lazarević M., Ostojić G., Stankovski S., Sremčev N., Vukelić Đ.: Improvement of product disassemly and recycling process based on LCA analisys, 20. SETAC Europe - LCA Case Study Symposium, Novi Sad: SETAC, 24-26 November, 2014, pp. 62-62, ISBN 2310-3191 Ostojić G., Stankovski S., Trivunović S., Kučević D., Zhang X.: Implementation of Internet of things for animal identification, 7. Balkan conference on animal science balnimalcon, Sarajevo: University of Sarajevo, Faculty of Agriculture and Food Science, 3-6 June, 2015, pp. 45-45 Štrbac Lj., Trivunović S., Kučević D., Stankovski S., Ostojić G., Marković B., Marković M.: Pedigree analysis of Nonius horse in Vojvodina, 1. International GEA (Geo Eco - Eco Agro) Conference, Podgorica: Faculty of Philosophy, University of Montenegro, 1-3 November, 2018, pp. 90-90, ISBN 978-86-7798-112-9 Tegeltija S., Ostojić G., Stankovski S., Kukolj D., Tejić B.: Temperature differences in household refrigerators, 6. South East Europe Postharvest Conference - Quality Management in Postharvest System, Novi Sad: Institute of Food Technology - Novi Sad, 26-28 June, 2019, pp. 67-67, ISBN 978-86-7994-059-9, UDK: 633/635:005.6(048.3) Vuković A., Mastilović J., Kevrešan Ž., Tegeltija S., Ostojić G., Stankovski S.: Temperature conditions optimisation and control as a tool for minimistion of fresh produce losses in restaurants , 6. South East Europe Postharvest Conference - Quality Management in Postharvest System, Novi Sad: Institute of Food Technology - Novi Sad, 26-28 June, 2019, pp. 69-69, ISBN 978-86-7994-059-9, UDK: 633/635:005.6(048.3) Kevrešan Ž., Mastilović J., Ostojić G., Stankovski S., Tegeltija S.: Modelling fresh produce postharvest shelf life in dependence of supply chain conditions, 6. South East Europe Postharvest Conference - Quality Management in Postharvest System, Novi Sad: Institute of Food Technology - Novi Sad, 26-28 June, 2019, pp. 70-70, ISBN 978-86-7994-059-9, UDK: 633/635:005.6(048.3) Tegeltija S., Ostojić G., Stankovski S., Kukolj D., Tejić B.: Food Delivery Using Cargo-Bikes with IoT, 25. IJCIEOM - International Joint Conference on Industrial Engineering and Operations Management, Novi Sad: University of Novi Sad - Faculty of Technical Sciences, Department of Industrial Engineering and Management, 15-17 July, 2019, pp. 167-168	8	4.00
M36	Uređivanje zbornika saopštenja međunarodnog naučnog skupa Uređivanje zbornika saopštenja međunarodnog naučnog skupa Anišić Z., Stankovski S.: Proceedings of the 1st Regional Conference - Mechatronics in Practice and Education MECH-CONF, 1. Regional Conference - Mechatronics in Practice and Education (MECHEDU), Subotica: Visoka tehnička škola strukovnih studija u Subotici, 8-10 December, 2011, ISBN 978-86-85409-67-7, UDK: 007.5 (082)	1	1.00
M42	Monografija nacionalnog značaja, monografsko izdanje građe, prevod izvornog teksta Monografija nacionalnog značaja, monografsko izdanje građe, prevod izvornog teksta Jocković M., Ognjanović Z., Stankovski S.: Veštačka inteligencija, inteligentne mašine i sistemi , Krug, 1997, ISBN 86-7136 032 6 Stankovski S., Šešlija D., Rakić-Skoković M., Ostojić G.: Primena RFID tehnologije u automatizaciji, Novi Sad, Centar za automatizaciju i mehatroniku, 2009, ISBN 978-86-907827-3-4	2	10.00
M44	Poglavlje u knjizi M41 ili rad u istaknutom tematskom zborniku vodećeg nacionalnog značaja Poglavlje u knjizi M41 ili rad u istaknutom tematskom zborniku vodećeg nacionalnog značaja Ostojić G., Jovanović V., Stevanov B., Stankovski S., Ćosić I.: Collaborative Design in the Assembly Systems, Springer US, Part of Springer Science+Business Media, 2007, str. 217-224, ISBN 978-0-387-49863-8. Rakić-Skoković M., Ostojić G., Lazarević M., Stankovski S.: Chapter 18: Improving Business Processes With RFID Technology, 2009, str. 161-168, ISBN 978-3-901509-69-8	2	4.00
M45	Poglavlje u knjizi M42 ili rad u tematskom zborniku nacionalnog značaja Poglavlje u knjizi M42 ili rad u tematskom zborniku nacionalnog značaja Vidicki P., Mitrović Veljković S., Antić A., Stankovski S.: Barriers for small and mediumenterprises developmentin the autonomus region of Vojvodina, Beograd, Benian ekonomik, 2009, str. 83-92, ISBN 978-86-81793-46-6, UDK: 334.713:352.07	1	1.50
M51	Rad u vodećem časopisu nacionalnog značaja Rad u vodećem časopisu nacionalnog značaja Stankovski S., Ćosić I., Borovac B., Šešlija D.: A Contribution to the Development of Knowledge-Based System for Grasping in Robotic Assembly, Roboti industriali, 1992 Borovac B., Šešlija D., Stankovski S.: Contribution to the defining of necessary level of automation of industrial system, International Journal of Industrial Systems, 1998, Vol. 1, No. 1, pp. 33-40, ISSN 1450-7609 Savić V., Šešlija D., Stankovski S., Jocanović M.: Trends in hydraulic and pneumatic automated systems, International Journal of Industrial Systems, 1999, Vol. 2, No. 1, pp. 53-58, ISSN 1450-7609 Zelenović D., Šešlija D., Stankovski S.: Prilog razmatranju uslova razvoja efektivnih procesa pakovanja, Savremeno pakovanje, 1999, Vol. 2, No. 4, pp. 56-66, ISSN 0581-8885 Šešlija D., Odri S., Tešić Z., Stankovski S.: Bridging the gap between machine and production control system, Facta universitatis - series: Mechanical Engineering, 2005, Vol. 3, No. 1, pp. 81-92, ISSN 0354–2025, UDK: 658.5 : 65.011.56 Stankovski S., Ostojić G., Jovanović V., Stevanov B.: Using RFID Technology in Collaborative Design, Facta universitatis - series: Mechanical Engineering, 2006, Vol. 4, No. 1, pp. 75-82, ISSN 0354–2025, UDK: 681.518:65.011.56 Ostojić G., Lazarević M., Jovanović V., Stankovski S., Ćosić I.: RFID Tehnology Use In Assembly and Disassembly Processes , Journal for Fluid Power, Automation and Mechatronics – Ventil, 2006, Vol. 6, No. 12, pp. 385-389, ISSN 1318-7279, UDK: 62-82+62-85+62-31/33+681.523 Ostojić G., Lazarević M., Jovanović V., Stankovski S., Ćosić I.: Design Process in the Assembly and Disassembly Systems Using RFID Technology , Journal for Fluid Power, Automation and Mechatronics – Ventil, 2006, Vol. 6, pp. 385-389, ISSN 1318-7279 Rakić-Skoković M., Ostojić G., Lazarević M., Stankovski S.: APPLYING RFID TECHNOLOGY IN LOGISTICS , Strategijski menadžment, 2008, No. 3, pp. 36-43, ISSN 0354-8414 Kučević D., Trivunović S., Plavšić M., Stankovski S., Ostojić G.: Savremeni aspekti obeležavanja životinja, Biotechnology in Animal Husbandry, 2009, Vol. 25, No. 1-2, pp. 153-159, ISSN 1450-9156, UDK: 636.081.2 Ratković Ž., Stankovski S.: Razvoj hidroenergetskog sistema na rijeci Neretvi u Republici Srpskoj, Elektroprivreda, 2009, Vol. 51, No. 3, pp. 73-80, ISSN 0013-5755, UDK: 620.9 Jovanović V., Filipović S., Ostojić G., Stankovski S., Lazarević M.: Analysis of Possible Use of Identification Technologies in Disassembly, Facta universitatis - series: Mechanical Engineering, 2009, Vol. 7, No. 1, pp. 81-82, ISSN 0354–2025, UDK: 658.515 Stankovski S., Ostojić G., Lazarević M., Popović B., Mijić D.: RFID TECHNOLOGY, PRIVACY AND SECURITY, Facta universitatis - series: Mechanical Engineering, 2010, Vol. 8, No. 1, pp. 57-62, ISSN 0354–2025 Purić R., Lazarević M., Ostojić G., Marović B., Stankovski S.: AN INFLUENCE OF RFID TECHNOLOGY ON PRODUCT INSURANCE, Facta universitatis - series: Mechanical Engineering, 2010, Vol. 8, No. 2, pp. 26-32, ISSN 0354–2025 Purić R., Lazarević M., Ostojić G., Marović B., Stankovski S.: RFID-BASED LIFECYCLE PRODUCT MONITORING FOR INSURANCE PURPOSES, Facta universitatis - series: Mechanical Engineering, 2011, Vol. 9, No. 1, pp. 119-126, ISSN 0354–2025, UDK: 658.562.6 Arsenijević D., Stankovski S., Ostojić G., Baranovski I., Oros D.: IoT Application Perspectives in Higher Education, Journal of Mechatronics, Automation and Identification Technology – JMAIT, 2018, Vol. 3, No. 3, pp. 21-26, ISSN 2466-3603 Markov M., Stankovski S., Ostojić G., Baranovski I., Horvat S.: Application of Firebase Cloud Service for Storing and Analyzing Data from IoT Mobile Devices, Journal of Mechatronics, Automation and Identification Technology – JMAIT, 2018, Vol. 3, No. 2, pp. 17-20, ISSN 2466-3603 Kukolj D., Ostojić G., Stankovski S., Nemet S.: Technology Status Visualisation using Patent Analytics: Multi-Compartment Refrigerators Case, Journal of Mechatronics, Automation and Identification Technology – JMAIT, 2019, Vol. 4, No. 1, pp. 1-8, ISSN 2466-3603	18	36.00
M52	Rad u časopisu nacionalnog značaja Rad u časopisu nacionalnog značaja Carić N., Stankovski S.: JEDAN PRISTUP SELEKCIJI DOMINATNIH VARIJABLI U PROBLEMIMA VIŠEKRITERIJUMSKOG ODLUČIVANJA , Produktivnost, 1990, No. 2, pp. 201-207, ISSN 0032-9975 Stankovski S., Mandić Đ.: MERENJE I KONTROLA NIVOA ZRNA U SILOSNIM ĆELIJAMA , Agronomska saznanja Revija, 1996, No. 3, pp. 41-44, ISSN 0354-2092 Perin B., Todorović P., Stankovski S., Govedarica M.: RAZVOJ INFORMACIONOG SISTEMA INSTITUTA ZA PLUĆNE BOLESTI U SREMSKOJ KAMENICI, JISA Info, 1997, No. 3, pp. 48-50, ISSN 0354-5334 Zelenović D., Šešlija D., Stankovski S.: PRILOG RAZMATRANJU USLOVA RAZVOJA EFEKTIVNIH PROCESA PAKOVANJA, Savremeno pakovanje, 1999, No. 2-4, pp. 56-65, ISSN 0581-8885 Šešlija D., Odri S., Tešić Z., Stankovski S.: Bridging the gap between machine and production control system, Facta universitatis - series: Mechanical Engineering, 2005, Vol. 3, No. 1, pp. 81-92, ISSN 0354–2025 Ostojić G., Stankovski S., Vukelić Đ.: Handling Automation of Fixtures and Fixture Elements in Flexible Technological Structures, Journal of Applied Engineering Science, 2009, Vol. 7, No. 4, pp. 7-12, ISSN 1451-4117 Stankovski S.: Potrebne aktivnosti na realizaciji strategije razvoja energetike Republike Srpske do 2030. godine iz oblasti obnovljivih izvora električne energije, Elektroprivreda, 2011, Vol. 64, No. 4, pp. 362-370, ISSN 0013-5755 Tarjan L., Šenk I., Stankovski S., Ostojić G.: Wireless Device Control via USB port, Facta universitatis - series: Mechanical Engineering, 2012, Vol. 10, No. 1, pp. 71-80, ISSN 0354–2025, UDK: 681.5 Ostojić G., Stankovski S., Tejić B., Đukić N., Tegeltija S.: Design, Control and Application of Quadcopter, International Journal of Industrial Engineering and Management, 2015, Vol. 6, No. 1, pp. 43-48, ISSN 2217-2661 Kukolj D., Ostojić G., Stankovski S., Nemet S.: Food storage quality: Status of technology through patent analysis, Journal of Mechatronics, Automation and Identification Technology – JMAIT, 2018, Vol. 3, No. 4, pp. 6-11, ISSN 2466-3603 Nemet S., Ostojić G., Kukolj D., Stankovski S., Jovanović D.: Feature Selection using Combined Particle Swarm Optimization and Artificial Neural Network Approach, Journal of Mechatronics, Automation and Identification Technology – JMAIT, 2019, Vol. 4, No. 4, pp. 7-11, ISSN 2466-3603 Baranovski I., Stankovski S., Ostojić G., Horvat S., Tegeltija S.: Augmented reality support for self-service automated systems, Journal of Graphic Engineering and Design, 2020, Vol. 11, No. 1, pp. 63-68, ISSN 2217-379X Stankovski S., Kukolj D., Ostojić G., Baranovski I., Nemet S.: Trends in Artificial Intelligence for Automated Industrial Systems, Journal of Mechatronics, Automation and Identification Technology – JMAIT, 2021, Vol. 6, No. 1, pp. 9-13, ISSN 2466-3603 Erić Obućina J., Stankovski S., Ostojić G.: Speed Control of AC Motor in Hydraulic System by Using U/F Control Method in Matlab Simulink, Journal of Mechatronics, Automation and Identification Technology – JMAIT, 2022, Vol. 7, No. 4, pp. 1-4, ISSN 2466-3603 Stankovski S., Ostojić G.: Opportunities of Generative AI Applications and Tools in Code Generation for Automation Devices, Journal of Mechatronics, Automation and Identification Technology – JMAIT, 2023, Vol. 8, No. 3, pp. 1-5, ISSN 2466-3603 Kukolj D., Ostojić G., Stankovski S., Nemet S., Mastilović J., Kevrešan Ž., Ubiparip Samek D., Đerić M.: Modelling of the Patent Portfolio Technology Space: IPC Codes Clustering of Blockchain Applications in the Food Supply Chain, Journal of Mechatronics, Automation and Identification Technology – JMAIT, 2023, Vol. 8, No. 1, pp. 1-6, ISSN 2466-3603 Ostojić G., Stankovski S.: IoT Protocols and Cybersecurity Threats, Journal of Mechatronics, Automation and Identification Technology – JMAIT, 2024, Vol. 9, No. 1, pp. 1-4, ISSN 2466-3603 Stankovski S., Ostojić G., Šiniković G.: Transformation of Learning in Higher Education based on AI-tools, Journal of Mechatronics, Automation and Identification Technology – JMAIT, 2024, Vol. 9, No. 3, pp. 17-20, ISSN 2466-3603	18	27.00
M53	Rad u naučnom časopisu Rad u naučnom časopisu Zelenović D., Ćosić I., Milić D., Stankovski S.: A DEVELOPMENT OF COMPUTER AIDED PROCESS PLANNING IN ASSEMBLY (APOTEP-M) , Publications of the School of Engineering Sciences, 1990, pp. 141-149, ISSN 0350-428X Zelenović D., Ćosić I., Milić D., Stankovski S.: A Development of Computer Aided Process Planning in Assembly (APOTEP M) , Publications of the School of Engineering Sciences, 1991, pp. 141-149, ISSN 0350-428X Borovac B., Šešlija D., Stankovski S.: Contribution of Defining Necessary level of Automation of Industrial System, International Journal of Industrial Systems, 1998, Vol. 1, No. 1, pp. 33-40, ISSN 1450-7609 Ostojić G., Stankovski S., Vukelić Đ., Lazarević M., Križan P.: Maintenance with the usage of RFID technology, Education, Research and Innovation, 2010, Vol. 3, No. 2, pp. 2-7, ISSN 1337-9089 Ostojić G., Stankovski S., Lazarević M., Vukelić Đ., Onderova I.: Use of RFID technology in disassembly system, Education, Research and Innovation, 2010, Vol. 3, No. 2, pp. 27-31, ISSN 1337-9089 Šenk I., Tarjan L., Ostojić G., Stankovski S.: Infrared tranciever for home automation, Electronics, 2010, Vol. 14, No. 2, pp. 82-85, ISSN 1450-5843 Tarjan L., Šenk I., Kovač R., Horvat S., Ostojić G., Stankovski S.: Automatic identification based on 2D barcodes, International Journal of Industrial Engineering and Management, 2011, Vol. 2, No. 4, pp. 151-157, ISSN 2217-2661, UDK: 003.295.8 Lazarević M., Stankovski S., Ostojić G., Šenk I., Tarjan L.: Determining the source of errors in a LEAN cell using RFID technology, International Journal of Industrial Engineering and Management, 2013, Vol. 4, No. 4, pp. 245-249, ISSN 2217-2661 Jokić D., Labura S., Stankovski S.: Development of Integral Environment in Matlab/Simulink for FPGA (DOI: 10.15598/aeee.v12i5.1112), Advances in Electrical and Electronic Engineering, 2014, Vol. 12, No. 5, pp. 459-468, ISSN 1336-1376 Beker I., Delić M., Milisavljević S., Gosnik D., Ostojić G., Stankovski S.: Can IoT be Used to Mitigate Food Supply Chain Risk? , International Journal of Industrial Engineering and Management, 2016, Vol. 7, No. 1, pp. 43-48, ISSN 2217-2661 Dragičević D., Tegeltija S., Ostojić G., Stankovski S., Lazarević M.: Reliability of Dot Peen Marking in Product Traceability , International Journal of Industrial Engineering and Management, 2017, Vol. 8, No. 2, pp. 71-76, ISSN 2217-2661	11	11.00
M55	Uređivanje naučnog časopisa nacionalnog značaja (na godišnjem nivou) Uređivanje naučnog časopisa nacionalnog značaja (na godišnjem nivou) Stankovski S.: International journal of industrial engineering and management Stankovski S.: International journal of industrial engineering and management Stankovski S.: International journal of industrial engineering and management Stankovski S.: International journal of industrial engineering and management Stankovski S.: International journal of industrial engineering and management Stankovski S.: International journal of industrial engineering and management Stankovski S.: International journal of industrial engineering and management Stankovski S.: Journal of Mechatronic, Automation and Identification Technology Stankovski S.: Journal of Mechatronic, Automation and Identification Technology Stankovski S.: International journal of industrial engineering and management	10	10.00
M61	Predavanje po pozivu sa skupa nacionalnog značaja štampano u celini Predavanje po pozivu sa skupa nacionalnog značaja štampano u celini Stankovski S., Ostojić G.: INDUSTRIJSKE KOMUNIKACIJE: STANJE I TRENDOVI , 32. Savetovanje proizvodnog mašinstva Srbije sa međunarodnim učešćem, Novi Sad: Fakultet tehničkih nauka u Novom Sadu, 18-20 Septembar, 2008, pp. 333-336, ISBN 978-86-7892-131-5 Stankovski S., Ostojić G.: Design and Construction of Mechatronic Systems for Educational Purposes, 1. Regional Conference - Mechatronics in Practice and Education (MECHEDU), Subotica: Visoka tehnička škola strukovnih studija u Subotici, 8-10 Decembar, 2011, pp. 21-28, ISBN 978-86-85409-67-7, UDK: 007.5(082)	2	3.00
M63	Saopštenje sa skupa nacionalnog značaja štampano u celini Saopštenje sa skupa nacionalnog značaja štampano u celini Ćosić I., Milić D., Stankovski S.: Prilog razvoju ekspertnog sistema za projektovanje postupaka rada i teholoških struktura u montaži , 22. Savetovanje proizvodnog mašinstva Jugoslavije, Ohrid, 1-2 Maj, 1989 Radaković N., Stankovski S.: Prilog razvoju ekspertnog sistema za projektovanje tehnoloških postupaka, 22. Savetovanje proizvodnog mašinstva Jugoslavije, Ohrid, 1-2 Maj, 1989, pp. 171-178 Stankovski S., Šešlija D.: Razvoj ekspertnog sistema za upravljanje fleksibilnom višeprstnom hvataljkom, 22. Savetovanje proizvodnog mašinstva Jugoslavije, Ohrid: Komitet za industrija i energetika na SR Makedonija, 1-2 Maj, 1989, pp. 323-329 ***Gatalo R., Hodolič J., Zeljković Ž., Stankovski S.: Projektovanje tehnološkog procesa za NUMA za obradu rotacionih delova, po principima gradnje ekspertnih sistema Naziv skupa: 9. jugoslovenski simpozijum "CIM u strategiji tehnološkog razvoja industrije prerade metala" XVI JUPITER konferencija - Nije povezan skup**greska** Šešlija D., Stankovski S., Borovac B.: Prilog razvoju inteligentne robotizovane montažne ćelije u CIM okruženju , 35. Jugoslovenska konferencija ETRAN, Ohrid: Jugoslovenski savez za elektroniku, telekomunikacije, automatizaciju i nuklearnu tehniku, 3-7 Jun, 1991, pp. 173-180, ISBN 86-80509-03-5 ***Petrovački D., Odri S., Erdeljan A., Grbović J., Stankovski S., Pavlica V.: Procesno upravljačka stanica PUS Naziv skupa: JUTEL IX stručno savetovanje o termoelektranama - Nije povezan skup**greska** ***Stankovski S., Ćosić I., Šešlija D.: Ispitivanje uslova za primenu sistema zasnovanog na znanju za hvatanje predmeta u robotizovanoj montaži Naziv skupa: ETAN '92 - Nije povezan skup**greska** Borovac B., Šešlija D., Stankovski S.: Robotizovana montaža - stanje i perspektive, 24. Savetovanje proizvodnog mašinstva Jugoslavije, Novi Sad: Institut za proizvodno mašinstvo, Fakultet tehničkih nauka, 16-18 Septembar, 1992, pp. 45-50 Borovac B., Stankovski S., Šešlija D.: Razvoj ekspertnog sistema za podršku u robotizovanoj montaži hvataljkama sa mekim kontaktnim površinama , 36. Jugoslovenska konferencija ETRAN, Kopaonik: Jugoslovenski savez za elektroniku, telekomunikacije, automatizaciju i nuklearnu tehniku, 20-23 Septembar, 1992, pp. 135-142, ISBN 86-80509-04-3 Šešlija D., Buturović Lj., Pejnović P., Stankovski S.: Automatizacija hvatanja kod inteligentnih robotskih manipulatora, 36. Jugoslovenska konferencija ETRAN, Kopaonik: Jugoslovenski savez za elektroniku, telekomunikacije, automatizaciju i nuklearnu tehniku, 20-23 Septembar, 1992, pp. 97-105, ISBN 86-80509-04-3 Stankovski S., Ćosić I., Borovac B., Šešlija D.: Istraživanje uslova za primenu sistema zasnovanih na znanju za hvatanje predmeta u robotizovanoj montaži , 36. Jugoslovenska konferencija ETRAN, Kopaonik: Jugoslovenski savez za elektroniku, telekomunikacije, automatizaciju i nuklearnu tehniku, 20-23 Septembar, 1992, pp. 105-112, ISBN 86-80509-04-3 Stankovski S., Borovac B., Šešlija D.: Istraživanje uslova za primenu upravljačkih sistema zasnovanih na znanju za automatizaciju montažnih zadataka, 9. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Institut za industrijske sisteme Fakulteta tehničkih nauka, 28-29 Jun, 1993 Šešlija D., Borovac B., Stankovski S.: Primena industrijskih robota u kontaktnim zadacima , 9. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Institut za industrijske sisteme Fakulteta tehničkih nauka, 28-29 Jun, 1993 Borovac B., Šešlija D., Stankovski S.: Nov način realizacije kontaktnih zadataka hvataljkama sa mekim kontaktnim površinama , 9. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Institut za industrijske sisteme Fakulteta tehničkih nauka, 28-29 Jun, 1993 Stankovski S., Šešlija D.: Predlog rešenja upravljačkog sistema zasnovanog na znanju za automatizaciju montažnih zadataka, 15. NU.ROBOTI.FTS, Klenike: Mašinski fakultet Univerziteta u Beogradu, 28-1 Jun, 1993, pp. 113-118 Stankovski S., Tomović R., Borovac B., Dudić S., Jefić B.: Ispitivanje procesa hvatanja predmeta kod čoveka, 6. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Fakultet tehničkih nauka, 1 Jun, 1997, pp. 591-598 Stankovski S., Šešlija D., Odri S., Madić Đ., Šijakov V.: Revitalizacija elektropneumatskog sistema postrojenja močila u sladari Maltineks , 12. Majski skup održavalaca Jugoslavije, Novi Sad: Institut za industrijske sisteme Fakulteta tehničkih nauka, 7-9 Maj, 1997, pp. 135-140 Savić V., Šešlija D., Stankovski S., Jocanović M.: Tendencije u razvoju hidrauličkih i pneumatskih automatizovanih sistema, 11. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Fakultet tehničkih nauka - Naučno stručna konferencija Industrijski sistemi IS'99, 28 Oktobar, 1999, pp. 25-25, UDK: 62.002;658.51 Šešlija D., Stankovski S.: Automatizacija tehnoloških sistema - osnova razvoja e-proizvodnje i e-poslovanja, 19. Simpozijum o novim tehnologijama u poštanskom i telekomunikacionom saobraćaju PosTel, Beograd: Saobraćajni fakultet, Beograd, 11-12 Decembar, 2001, pp. 165-175, ISBN 86-7395-114-3 Šešlija D., Stankovski S.: Komunikacija između sistema za rukovanje komadnim materijalom i informacionog sistema, 21. Simpozijum o novim tehnologijama u poštanskom i telekomunikacionom saobraćaju PosTel, Beograd: Saobraćajni fakultet BEOGRAD, 9-10 Decembar, 2003, pp. 149-158, ISBN 86-7395-159-3 Nikoličić S., Škrinjar D., Stankovski S.: Šta nude RFID tehnologije u logistici, 7. Međunarodni naučno-stručni skup o dostignućima elektro i mašinske industrije - DEMI, Banja Luka: Univerzitet u Banjaluci, Mašinski fakultet, 27-28 Maj, 2005, pp. 645-651 Kuzmanović B., Stankovski S.: INTELIGENTNA PODRŠKA I EDI TEHNOLOGIJA U OSIGURANJU, 4. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet Istočno Sarajevo, 23-25 Mart, 2005, pp. 272-276 Nikoličić S., Oros D., Stankovski S.: Šta nude RFID tehnologije u logistici , 7. Međunarodni naučno-stručni skup o dostignućima elektro i mašinske industrije - DEMI, Banja Luka: Univerzitet u Banjaluci, Mašinski fakultet, 27-28 Maj, 2005, pp. 645-651 Lazarević M., Ostojić G., Stankovski S., Jovanović V.: RFID Technologies in Product Disassembly Proces, 5. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet Istočno Sarajevo, 22-24 Mart, 2006, pp. 193-197, ISBN 99938-624-2-8 Ostojić G., Jovanović V., Stankovski S., Lazarević M.: Digitalna proizvodnja i RFID tehnologija, 10. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Fakultet tehnickih nauka u Novom Sadu, 9-10 Oktobar, 2009, pp. 119-120, ISBN 86-85211-96-4 Stankovski S., Kuzmanović B., Hajduković M., Živanov Ž., Rakić-Skoković M., Škrinjar D.: Automat za prodaju polisa putničko zdravstvenog osiguranja - polisomat , 5. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet, 22-24 Mart, 2006, pp. 328-333, ISBN 99938-624-2-8 Lazarević M., Ostojić G., Stankovski S., Škrinjar D.: Prikupljanje podataka iz sistema za demontažu i reciklažu korišćenjem RFID tehnologije , 9. International Conference DEPENDABILITY AND QUALITY MANAGEMENT ICDQM, Beograd: Istraživački centar za upravljanje kvalitetom i pouzdanošću, 13-15 Jun, 2006, pp. 750-756, ISBN 145-4966, UDK: 658.56 Ostojić G., Stankovski S., Lazarević M., Škrinjar D.: Primena RFID tehnologije u procesu skladištenja robe supermarketima , 9. International Conference DEPENDABILITY AND QUALITY MANAGEMENT ICDQM, Beograd: Istraživački centar za upravljanje kvalitetom i pouzdanošću, 13-15 Jun, 2006, pp. 589-595, ISBN 145-4966, UDK: 658.56 Stevanov B., Ostojić G., Stankovski S., Lazarević M.: Model relacione baze podataka za upotrebu podataka dobijenih primenom RFID tehnologije u procesima demontaže , 33. JUPITER konferencija, Zlatibor: University of Belgrade, Faculty of mechanical Engeneering, 15-16 Maj, 2007, pp. 4-4, ISBN 978-86-7083-592-4 Stankovski S., Raković M., Jovanović D., Odri S.: An integration of RFID technologies in control systems, , 2007, 6. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Mašinski fakultet, Srpsko Sarajevo, 28-30 Mart, 2007, ISBN 99938-624-2-8 Lazarević M., Ostojić G., Stankovski S., Rakić-Skoković M.: Implementation of RFID Technology In Disassembly and Recycling Systems , 6. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Mašinski fakultet, Srpsko Sarajevo, 28-30 Mart, 2007, pp. 151-155, ISBN 99938-624-2-8 Stankovski S., Ostojić G., Lazarević M., Škrinjar D.: PRIVACY, SECURITY AND RFID TECHNOLOGY, 11. International Conference DEPENDABILITY AND QUALITY MANAGEMENT ICDQM, Beograd: Research Center of Dependability and Quality Management - DQM, 18-19 Jun, 2008, pp. 982-987, ISBN 1451-4966, UDK: 658.56 Lazarević M., Ostojić G., Rakić-Skoković M., Stankovski S.: INCREASE OF DISASSEMBLY SYSTEM UTILISATION LEVEL WITH THE USAGE OF RFID TECHNOLOGY , 11. International Conference DEPENDABILITY AND QUALITY MANAGEMENT ICDQM, Beograd: Research Center of Dependability and Quality Management - DQM, 18-19 Jun, 2008, pp. 930-936, ISBN 1451-4966, UDK: 658.56 Lazarević M., Ostojić G., Rakić-Skoković M., Stankovski S.: INCREASE OF DISASSEMBLY SYSTEM UTILISATION LEVEL WITH THE USAGE OF RFID TECHNOLOGY , 11. International Conference DEPENDABILITY AND QUALITY MANAGEMENT ICDQM, Beograd: Istraživački centar DQM, 18-19 Jun, 2008, pp. 930-937, ISBN ISSN 1451-4966, UDK: 658.56 Purić R., Stankovski S., Ostojić G., Radosavljević Z.: UTICAJ OSIGURANJA U ŽIVOTNOM CIKLUSU PROIZVODA KORIŠĆENJEM RFID TEHNOLOGIJE , 11. International Conference DEPENDABILITY AND QUALITY MANAGEMENT ICDQM, Beograd: Istraživački centar DQM, 18-19 Jun, 2008, pp. 967-973, ISBN 1451-4966, UDK: 658.56 Stankovski S., Ostojić G., Gogolak L.: RAZVOJ SOFTVERSKOG KOMUNIKACIONOG INTERFEJSA IZMEĐU PLK RAZLIČITIH PROIZVOĐAČA , 31. Kongres o hidropneumatičkoj automatizaciji - HIPNEF, Vrnjačka Banja: Mašinski fakultet univerziteta u Nišu, 15-17 Oktobar, 2008, pp. 469-474, ISBN 978-86-80587-87-5 (M, UDK: 621.5/6 (082) Stankovski S., Jovanović D., Ostojić G.: AN INTEGRATION OF RFID I GSM TECHNOLOGY IN AN ACCESS CONTROL SYSTEM , 7. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet Istočno Sarajevo, 26-28 Mart, 2008, pp. 584-588, ISBN 99938-624-2-8 Stankovski S., Miladinović Lj., Tarjan L., Ilić V.: Razvoj didaktičkog manipulatora MRA-M01, 31. Kongres o hidropneumatičkoj automatizaciji - HIPNEF, Vrnjačka Banja: Mašinski fakultet Univerziteta u Nišu, Zbornik radova HIPNEF 2008, 15-17 Oktobar, 2008, pp. 461-466, ISBN 978-86-80587-87-5 Stankovski S., Ostojić G., Šenk I., Tarjan L., Grubor N.: RAZVOJ I PRIMENA EPG SISTEMA, 32. Kongres o hidropneumatičkoj automatizaciji - HIPNEF, Vrnjačka Banja: Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije, 14-16 Oktobar, 2009, pp. 253-258, ISBN 978-86-81505-48-9 Ostojić G., Stankovski S., Rakić-Skoković M., Šenk I., Lazarević M.: ANALIZA PRIMENE RFID TAGOVA U PRAĆENJU GOVEDA , 8. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet, Istočno Sarajevo, Republika Srpska, BiH, 18-20 Mart, 2009, pp. 576-579, ISBN 99938-624-2-8 Šenk I., Stankovski S., Ostojić G., Tarjan L.: APPLICATIONS OF RFID SYSTEMS IN LIVESTOCK IDENTIFICATION , 32. Kongres o hidropneumatičkoj automatizaciji - HIPNEF, Vrnjačka Banja: Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije, 14-16 Oktobar, 2009, pp. 267-272, ISBN 978-86-81505-48-9 Stankovski S., Ostojić G., Tarjan L., Šenk I., Ljubinković N.: Primena RFID tehnologije i video nadzora za upravljanje pristupom laboratoriji za mehatroniku, 32. Kongres o hidropneumatičkoj automatizaciji - HIPNEF, Vrnjačka Banja: Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije, 14-16 Oktobar, 2009, pp. 273-278, ISBN 978-86-81505-48-9 Stankovski S., Oros D., Ostojić G., Tarjan L., Radić M.: Analiza hvatanja etiketa na IML robotima, 8. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet, Istočno Sarajevo, Republika Srpska, BiH, 18-20 Mart, 2009, pp. 810-813, ISBN 99938-624-2-8 Purić R., Lazarević M., Ostojić G., Stankovski S.: PRAĆENJE ŽIVOTNOG CIKLUSA PROIZVODA KORIŠĆENJEM RFID TEHNOLOGIJE ZA POTREBE OSIGURANJA, 8. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet, Istočno Sarajevo, Republika Srpska, BiH, 18-20 Mart, 2009, pp. 562-566, ISBN 99938-624-2-8 Ostojić G., Stankovski S., Milojković A.: PRIMENA BEŽIČNIH TEHNOLOGIJA U SISTEMIMA ZA SNABDEVANJE VODOM , 8. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet, Istočno Sarajevo, Republika Srpska, BiH, 18-20 Mart, 2009, pp. 631-635, ISBN 99938-624-2-8 Ostojić G., Stankovski S., Lazarević M., Šenk I.: Primena RFID tehnologije u upravljanju gradskim čvrstim otpadom, 9. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet Istočno Sarajevo, Srpsko Sarajevo, Republika Srpska, 17-19 Mart, 2010, pp. 55-59, ISBN 99938-624-2-8 Kovač R., Stankovski S.: Primena senzora ubrzanja u zaštitnim sistema, 9. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet Istočno Sarajevo, Srpsko Sarajevo, Republika Srpska, 17-19 Mart, 2010, pp. 738-742 Ostojić G., Stankovski S., Milojković A., Škrinjar D., Miladinović Lj.: Bežična razmena podataka u sistemima za snabdevanje vodom - primer Grada Paraćin, 10. Vodovodni i kanalizacioni sistemi, Pale, 20-22 Maj, 2010, pp. 143-149, ISBN 978-86-82931-34-8, UDK: 628.1/.3(082) Horvat S., Ljubinković N., Stankovski S., Ostojić G., Šenk I., Tarjan L.: Identifikacija taksista i taksi vozila korišćenjem RFID tehnologije, 10. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet Istočno Sarajevo, Srpsko Sarajevo, Republika Srpska, 16-18 Mart, 2011, pp. 576-580, ISBN 978-99938-624-6-8 Šenk I., Ostojić G., Stankovski S., Tarjan L., Lazarević M.: Sledljivost prehrambenih proizvoda korišćenjem RFID tehnologije, 10. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet Istočno Sarajevo, Srpsko Sarajevo, Republika Srpska, 16-18 Mart, 2011, pp. 584-588, ISBN 978-99938-624-6-8 Tarjan L., Šenk I., Ostojić G., Stankovski S., Tejić B.: Razvoj aplikacije za generisanje 2D koda za prenos bitnih podataka o toku proizvodnje prehrambenih proizvoda, 11. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet Istočno Sarajevo, Srpsko Sarajevo, Republika Srpska, 21-23 Mart, 2012, pp. 788-791, ISBN 978-99938-624-8-2 Đukić N., Tegeltija S., Ostojić G., Stankovski S.: Primena bežičnih tehnologija (bluetooth) za praćenje prisustva, 11. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet Istočno Sarajevo, Srpsko Sarajevo, Republika Srpska, 21-23 Mart, 2012, pp. 337-340, ISBN 978-99938-624-6-8 Lazarević M., Ostojić G., Stankovski S., Herakovič N., Debevec M.: Koncept sledljivosti proizvoda primenom identifikacionih tehnologija, 11. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet Istočno Sarajevo, Srpsko Sarajevo, Republika Srpska, 21-23 Mart, 2012, pp. 513-516, ISBN 978-99938-624-6-8 Kovač R., Tejić B., Tegeltija S., Horvat S., Ostojić G., Stankovski S.: Edukativni interfejs Oktopod Studio: Upravljanje niskonaponskim mehatroničkim uređajima pomoću mobilnog telefona, 3. Međunarodni naučno-stručni skup Tehnološke inovacije - generator privrednog razvoja, Banja Luka, 12 Novembar, 2012, pp. 153-161, ISBN 978-99955-629-5-3 Tejić B., Tegeltija S., Kovač R., Horvat S., Ostojić G., Stankovski S.: Problemi i rešenja u pozicioniranju mobilnih robota: odometrija i upravljanje, 3. Međunarodni naučno-stručni skup Tehnološke inovacije - generator privrednog razvoja, Banja Luka, 12 Novembar, 2012, pp. 283-292, ISBN 978-99955-629-5-3 Tarjan L., Šenk I., Tejić B., Ostojić G., Stankovski S.: Ispitivanje čitljivosti QR koda na ambalaži prehrambenih proizvoda, 12. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet Istočno Sarajevo, Srpsko Sarajevo, Republika Srpska, 20-22 Mart, 2013, pp. 500-503, ISBN 978-99955-763-1-8 Kovač R., Stankovski S., Tegeltija S., Đukić N., Horvat S.: Mehatronički sistem umetničke postavke "Pendulum Tuning", 12. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet Istočno Sarajevo, 20-22 Mart, 2013, ISBN 99938-624-2-8 Horvat S., Nićin M., Stankovski S., Milojković A., Zečević I.: Automatizacija strukture radne organizacije i kontrole odsustva zaposlenih, 12. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet Istočno Sarajevo, 20-22 Mart, 2013, pp. 670-674, ISBN 978-99955-763-1-8 Tejić B., Tegeltija S., Ostojić G., Stankovski S., Miljković P.: Manipulator za promenu orijentacije predmeta rada na pokretnoj traci, 13. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet Istočno Sarajevo, 19-21 Mart, 2014, pp. 576-580, ISBN 99938-624-2-8 Majstorović N., Baranovski I., Ljubinković N., Ostojić G., Stankovski S.: Realizacija i praktična primena vending mašine Drinkomat, 13. Međunarodni naučno-stručni simpozijum Infoteh-Jahorina, Jahorina: Elektrotehnički fakultet Istočno Sarajevo , 19-21 Mart, 2014, pp. 476-480, ISBN 99938-624-2-8 Beg I., Šenk I., Tarjan L., Ostojić G., Stankovski S.: Razvoj RFID oznake za obeležavanje prehrambenih proizvoda, 14. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet Istočno Sarajevo, Srpsko Sarajevo, Republika Srpska, 18-20 Mart, 2015, pp. 388-392, ISBN 978-99955-763-6-3 Tegeltija S., Tejić B., Đukić N., Ostojić G., Stankovski S.: Određivanje putanje bespilotne letelice kao dela evakuacionog puta, 14. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet Istočno Sarajevo, Srpsko Sarajevo, Republika Srpska, 18-20 Mart, 2015, pp. 757-761, ISBN 978-99955-763-6-3 Tarjan L., Šenk I., Đukić N., Baranovski I., Stankovski S.: Upravljanje servopneumatskim linearnim aktuatorom zasnovano na FPGA, 14. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet Istočno Sarajevo, Srpsko Sarajevo, Republika Srpska, 18-20 Mart, 2015, pp. 827-831, ISBN 978-99955-763-6-3 Tejić B., Đukić N., Tegeltija S., Ostojić G., Stankovski S.: Implementacija IoT merne stanice za primenu u preciznoj poljoprivredi, 15. International Symposium INFOTEH-JAHORINA (INFOTEH), Jahorina: Elektrotehnički fakultet Istočno Sarajevo, Istočno Sarajevo, Republika Srpska, 16-18 Mart, 2016, pp. 7-10, ISBN 978-99955-763-9 Tegeltija S., Tejić B., Đukić N., Ostojić G., Stankovski S.: Kodiranje podataka o plaćanju QR kodom, 15. International Symposium INFOTEH-JAHORINA (INFOTEH), Jahorina: Elektrotehnički fakultet Istočno Sarajevo, Istočno Sarajevo, Republika Srpska, 16-18 Mart, 2016, pp. 447-451, ISBN 978-99955-763-9 Stankovski S., Mihajlov S., Baranovski I., Oros D., Tarjan L.: Hvataljka za prenos malog tereta kod bespilotnih letelica, 15. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet Istočno Sarajevo, Srpsko Sarajevo, Republika Srpska, 16-18 Mart, 2016, pp. 848-853, ISBN 978-99955-763-9-4 Đukić N., Tejić B., Tegeltija S., Ostojić G., Stankovski S.: IoT sistem za prikupljanje podataka o prehrambenim proizvodima, 16. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet Istočno Sarajevo, Istočno Sarajevo, Republika Srpska, 22-24 Mart, 2017 Lazarević M., Ostojić G., Stankovski S., Sremčev N., Tegeltija S.: Razvoj opšteg modela za primenu identifikacionih tehnologija u označavanju proizvoda, 16. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet Istočno Sarajevo, Istočno Sarajevo, Republika Srpska, 22-24 Mart, 2017 Baranovski I., Stankovski S., Ostojić G., Oros D., Horvat S.: Software support for self-service automated systems (Softverska podrška samouslužnim automatizovanim sistemima), 17. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: University of East Sarajevo, Faculty of Electrical Engineering, 21-23 Mart, 2018, pp. 1-6, ISBN 978-1-5386-4907-7, UDK: IEEE Catalog Number: CFP18JAH-ART Stankovski S., Dragičević D., Ostojić G., Marković M., Šenk I.: Characteristics of the temperature field of household refridgeration appliances (Karakteristike temperaturnog polja rashladnih uređaja u domaćinstvima), 17. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: University of East Sarajevo, Faculty of Electrical Engineering, 21-23 Mart, 2018, pp. 1-5, ISBN 978-1-5386-4907-7 Tegeltija S., Tejić B., Ostojić G., Stankovski S., Baranovski I.: Sistem za kontrolu pristupa gradskim zonama sa ograničenim pristupom motornim vozilima, 18. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet Istočno Sarajevo, Srpsko Sarajevo, Republika Srpska, 20-22 Mart, 2019, pp. 286-290, ISBN 978-99976-710-2-8 Stankovski S., Ostojić G., Baranovski I., Stanojević M., Babić M.: Povezanost veštačke inteligencije i industrijske automatizacije, 5. INTERNATIONAL SCIENTIFIC CONFERENCE- COMETa, Istočno Sarajevo, 26-28 Novembar, 2020, pp. 197-202 Stankovski S., Ostojić G.: Značaj industrijske informacione bezbednosti u upravljačkim sistemima, 6. International Scientific Conference "Conference on Mechanical Engineering Technologies and Applications" - COMETa, Jahorina, 17-19 Novembar, 2022, pp. 295-300, ISBN 978-99976-947-6-8 Erić Obućina J., Stankovski S., Ostojić G.: Speed Control of AC Motor in Hydraulic System by Using U/F Control Method In Matlab Simulink, 6. International Scientific Conference "Conference on Mechanical Engineering Technologies and Applications" - COMETa, Jahorina, 17-19 Novembar, 2022, pp. 309-314, ISBN 978-99976-947-6-8 Stankovski S., Tarjan L., Šenk I., Tegeltija S., Ostojić G.: Dvadeset godina iskustva na studijskom programu mehatronika na Fakultetu tehničkih nauka u Novom Sadu, 28. Trendovi razvoja: Univerzitetsko obrazovanje za privredu, Kopaonik: Fakultet tehničkih nauka, 2022, pp. 103-106, ISBN 978-86-6022-401-1, UDK: 378.4:[37.017:332(082) Ostojić G., Lazarević M., Lubura S., Popović N., Stankovski S.: Implementacija sistema za praćenja paleta primenom jednostavnih identifikacionih oznaka, 67. ETRAN - Konferencija za elektroniku, telekomunikacije, računarstvo, automatiku i nuklearnu tehniku, Istočno Sarajevo, 5-8 Jun, 2023, pp. 1-4 Stankovski S., Ostojić G.: STICANJE I PROVERA ZNANJA, VEŠTINA I KOMPETENCIJA KORIŠĆENJEM PLATFORMI I ALATA VEŠTAČKE INTELIGENCIJE, 30. Skup "Trendovi razvoja" - TREND, Vrnjačka Banja, 7-10 Februar, 2024, pp. 236-239 Stankovski S., Ostojić G.: Praćenje proizvoda korišćenjem mobilnog računarstva na ivici, 30. YU INFO, Kopaonik, 10-13 Mart, 2024, pp. 208-211 Ostojić G., Stankovski S.: IMPLEMENTATION OF BLOCKCHAIN TECHNOLOGY IN SUPPLY CHAIN, 51. SYM-OP-IS Simpozijum o operacionim istraživanjima, Tara, 16-19 Septembar, 2024, pp. 210-215	79	39.50
M71	Odbranjena doktorska disertacija Odbranjena doktorska disertacija Stankovski S.: Primena upravlјačkih sistema zasnovanih na znanju za automatizaciju montažnih zadataka, Doktorska disertacija , 1994	1	6.00
M72	Odbranjen magistarski rad Odbranjen magistarski rad Stankovski S.: Razvoj ekspertnog sistema za određivanje centra hvatanja geometrijskih primitiva, Magistarska teza , 1991	1	3.00
M81	Novi proizvod ili tehnologija uvedeni u proizvodnju - međunarodni nivo Novi proizvod ili tehnologija uvedeni u proizvodnju - međunarodni nivo Oros D., Baranovski I., Stankovski S., Ostojić G., Červeni B., Milosavljević M.: Manipulator za izuzimanje i slaganje upijača u plastične posude, 2013 Baranovski I., Oros D., Stankovski S., Ostojić G., Oros P., Šiposki A.: Manipulator za izuzimanje i slaganje plastičnih posuda, 2013 Oros D., Baranovski I., Stankovski S., Ostojić G., Šiposki A.: Automat za nagradne igre kupaca sa fiskalnim računima, 2017	3	24.00
M82	Nova proizvodna linija, novi materijal, industrijski prototip, Nova proizvodna linija, novi materijal, industrijski prototip, Tegeltija S., Tejić B., Đukić N., Stankovski S., Ostojić G., Šiposki A.: Uređaj za određivanje stanja bilјaka, 2017	1	6.00
M83	Novo laboratorijsko postrojenje, novo eksperimentalno postrojenje, novi tehnološki postupak Novo laboratorijsko postrojenje, novo eksperimentalno postrojenje, novi tehnološki postupak Tešić Z., Stevanov B., Šešlija D., Stankovski S., Golušin B.: Izrada integralnog informacionog sistema za upravljanje proizvodnjom i poslovanjem u kompaniji VITINKA, Kozluk, Republika Srpska, 2007	1	4.00
M84	Bitno poboljšan postojeći proizvod ili tehnologija Bitno poboljšan postojeći proizvod ili tehnologija Stankovski S., Ostojić G., Šenk I., Jovanović D.: Sistem za proveru mesečnih pretplatnika , 2009 Stankovski S., Ostojić G., Lazarević M., Rakić-Skoković M.: Sistem za praćenje transportnih sredstava sa gotovim proizvodima , 2009 Tejić B., Tegeltija S., Stankovski S., Tešić Z., Ostojić G., Milosavljević M.: SISTEM ZA PRAĆENJE I NADZOR KANCELARIJSKIH APARATA ZA VODU, 2014 Tejić B., Tegeltija S., Ostojić G., Stankovski S., Šiposki A.: Upravljačka jedinica za nadzor automatizovanih sistema za plaćanje, 2015 Beg I., Baranovski I., Oros D., Ostojić G., Stankovski S., Milosavljević M.: Uređaj za overavanje opštih uplatnica u bankarskim kioscima, 2015 Stankovski S., Tegeltija S., Ostojić G., Tejić B., Oros D., Milosavljević M.: Sistem za nadzor prisustnosti vozila na parking prostoru na bazi bežičnih senzorskih mreža, 2016 Đukić N., Tejić B., Tegeltija S., Ostojić G., Stankovski S., Šiposki A.: MERNA STANICA SA PODRŠKOM FIWARE TEHNOLOGIJE, 2016 Tegeltija S., Tejić B., Đukić N., Stankovski S., Ostojić G., Šiposki A.: Sistem za određivanje stanja bilјaka, 2017 Jocanović M., Karanović V., Stankovski S.: Konstrukcija hidrauličnog diferencijaklnog pojačivača pritiska za pogon hidraulične prese FC-100T, 2017	9	27.00
M85	Prototip, nova metoda, softver, standardizovan ili atestiran instrument, Prototip, nova metoda, softver, standardizovan ili atestiran instrument, Milojević Z., Zeljković Ž., Zeljković M., Tabaković S., Stankovski S., Odri S., Gatalo R.: Programsko rešenje za oštrenje - profilisanje tocila za brušenje provlakača Korisnik: A.D. Majevica Bačka Palanka, 2004 Stankovski S., Ostojić G., Šenk I., Tarjan L.: Sistem za upravljanje pristupom na konferencijama , 2008 Stankovski S., Ostojić G., Lazarević M., Rakić-Skoković M.: Sistem za praćenje transportnih sredstava na kontrolisanim prostorima , 2008 Stankovski S., Đukić N., Tegeltija S., Ostojić G., Tarjan L., Šenk I.: Interfejs za Windows Mobile operativni sistem za on-line pristup PLK, 2010 Horvat S., Ljubinković N., Stankovski S., Ostojić G., Šenk I., Tarjan L.: Identifikacija taksista i taksi vozila korišćenjem RFID tehnologije, 2010 Kovač R., Horvat S., Šenk I., Ostojić G., Tarjan L., Stankovski S.: Softver za Android operativni sistem za prepoznavanje označenih entiteta, 2010 Milosavljević M., Ljubinković N., Stankovski S., Ostojić G.: Sistem za identifikaciju inventara korišćenjem tehnologija za automatsku identifikaciju, 2012 Kolarić T., Ostojić G., Stankovski S., Nikolić D.: Sistem za preuzimanje rasporeda rada na mobilnim telefonima putem 2d barcode, 2013 Baranovski I., Stankovski S., Ostojić G., Tejić B., Tegeltija S., Dragičević D., Šiposki A.: Manipulator za promenu orijentacije kutija na pokretnoj traci , 2013 Tegeltija S., Tejić B., Stankovski S., Ostojić G., Horvat S., Milosavljević M.: Aplikacija za generisanje podataka o plaćanju u obliku QR koda, 2014 Tejić B., Beg I., Tegeltija S., Stankovski S., Ostojić G., Šiposki A.: Pametni RFID tag za obeležavanјe prehrambenih proizvoda, 2014	11	22.00
M92	Registrovan patent, soj, sorta ili rasa, arhitektonsko, građevinsko ili urbanističko autorsko delo Registrovan patent, soj, sorta ili rasa, arhitektonsko, građevinsko ili urbanističko autorsko delo Lazarević M., Ostojić G., Stankovski S., Ćosić I.: Postupak upravljanja proizvodom u celokupnom životnom veku korišćenjem RFID taga, Broj priznatog patenta: 51796, datum priznavanja 24.10.2011. godine., 2011 Tarjan L., Šenk I., Ostojić G., Stankovski S., Lazarević M.: Postupak za sledljivost prehrambenih proizvoda korišćenjem dvodimenzionalnog QR koda (Objavljena patentna prijava P-2012/0478 pod brojem RS 20120478 A1, Datum: 30.04.2014) -, Beograd, Republika Srbija, Zavod za intelektualnu svojinu, 2014 Stankovski S., Tegeltija S., Ljubinković N., Majstorović N., Ostojić G., Nićin M.: Metod za vraćanje novčanih apoena u bankomat mašinama (Patentna prijava broj: P-2014/190, Datum:16.4.2014.), Novi Sad, 2014 Stankovski S., Ostojić G., Tegeltija S., Šiposki A., Nićin M.: Postupak elektronskog plaćanja za Internet prodaju sa rezervacijom sredstava kod učesnika u prodaji (Patentna prijava broj: Р-2015/0058), Beograd, 2015 Kovač R., Tegeltija S., Ostojić G., Tarjan L., Stankovski S., Šenk I., Tejić B., Đukić N.: Sistem za zadavanje recepta zapisanog u obliku QR koda u memoriju mikrotalasne pećnice pomoću mobilnog telefona (Priznat patent broj 54810, po prijavi P-2012/0471 od 31.10.2012. Patent je upisan u registar patenata 02.08.2016. godine, i objavljen u Glasniku intelektualne svojine br. 5/2016 dana 31.10.2016.), Beograd, Republika Srbija, Zavod za intelektualnu svojinu, 2016 Stankovski S., Tegeltija S., Tejić B., Ostojić G., Milojković A.: Bežično upravljanje pametnom slavinom (Patent priznat pod brojem: 55208, Patentna prijava broj: P-2014/0051, Datum: 06.02.2014.), 2017 Banić M., Stamenković D., Miltenović A., Simonović M., Stankovski S., Ostojić G., Rajić M., Perić M., Tomić M., Pavlović V., Rangelov D., Nikolić V., Rodić A., Šumarac J., Kljajić J.: Sistem i metoda za automatizovanu vizuelnu inspekciju podvozja vozila kao što je voz i primena (П-2022/0869), patent objavljen 29.3.2024, 3/2024, 2024	7	84.00