Prezime:	Adamović (Majkić)
Ime:	Savka
APVNT broj:	3050
Organizacija:	Fakultet tehničkih nauka u Novom Sadu

Produkcija - zbirni rezultati
Oznaka	Naziv kriterijuma produkcije	Broj	Poena
		176	229.70
M13	Monografska studija/poglavlje u knjizi M11 ili rad u tematskom zborniku vodećeg međunarodnog značaja Monografska studija/poglavlje u knjizi M11 ili rad u tematskom zborniku vodećeg međunarodnog značaja Banjanin B., Vladić G., Adamović (Majkić) S., Bošnjaković G.: Polymers for 3D Printing, chapter 19 - Global market structure, Oksford, Elsevier Inc., William Andrew - Applied Science Publishers, 2022, str. 353-367, ISBN 978-0-12-818311-3	1	6.00
M21	Rad u vrhunskom međunarodnom časopisu Rad u vrhunskom međunarodnom časopisu Kiurski J., Ranogajec J., Vučetić (Petrović) S., Zorić D., Adamović (Majkić) S., Oros I., Krstić J.: Fired clay with polymer addition as printing developer purifier, Applied Clay Science, 2012, Vol. 65, No. 65/66, pp. 48-52, ISSN 0169-1317 Prica M., Adamović (Majkić) S., Dalmacija B., Rajić Lj., Tričković J., Rapajić S., Bečelić-Tomin M.: The electrocoagulation/flotation study: The removal of heavy metals from the waste fountain solution, Process Safety and Environmental Protection, 2015, Vol. 94, pp. 262-273, ISSN 0957-5820 Adamović (Majkić) S., Prica M., Dalmacija B., Rapajić S., Novaković D., Pavlović Ž., Maletić S.: Feasibility of electrocoagulation/flotation treatment of waste offset printing developer based on the response surface analysis, Arabian Journal of Chemistry, 2016, Vol. 9, No. 1, pp. 152-162, ISSN 1878-5352, UDK: DOI: http://dx.doi.org/10.1016/j.arabjc.2015.03.018 Adamović D., Dorić J., Vojinović-Miloradov M., Adamović (Majkić) S., Pap S., Radonić (Jakšić) J., Turk Sekulić M.: The emission of BTEX compounds during movement of passenger car in accordance with the NEDC, Science of the Total Environment, 2018, Vol. 639, pp. 339-349, ISSN 0048-9697 Adamović (Majkić) S., Prica M., Dalmacija B., Kragulj Isakovski M., Kerkez Đ., Rapajić S., Adamović D.: Measurement of copper deposition by electrocoagulation/flotation from waste printing developer, Measurement, 2019, Vol. 131, pp. 288-299, ISSN 0263-2241 Adamović D., Čepić Z., Adamović (Majkić) S., Stošić M., Obrovski B., Morača S., Vojinović-Miloradov M.: Occupational Exposure to Formaldehyde and Cancer Risk Assessment in an Anatomy Laboratory , International Journal of Environmental Research and Public Health, 2021, Vol. 18, ISSN 1661-7827	6	48.00
M22	Rad u istaknutom međunarodnom časopisu Rad u istaknutom međunarodnom časopisu Kiurski J., Adamović (Majkić) S., Oros I., Krstić J., Vojinović-Miloradov M.: The removal efficiency of heavy metals from spent printing developer, Carpathian Journal of Earth and Environmental Sciences, 2012, Vol. 7, No. 1, pp. 5-16, ISSN 1842-4090 Kiurski J., Oros I., Ralević N., Kovačević I., Adamović (Majkić) S., Krstić J., Čomić L.: Cluster and principal component analysis in the assessment of fountain solution quality, Carpathian Journal of Earth and Environmental Sciences, 2013, Vol. 8, No. 1, pp. 19-23, ISSN 1842-4090 Adamović (Majkić) S., Rajs V., Adamović D., Mihailović A., Samardžić S., Banjanin B., Stojanović Bjelić Lj.: Potential chemical stressors emitted during the operation of machines in the digital printing process, International Journal of Environmental Analytical Chemistry, 2022, Vol. 102, No. 16, pp. 3841-3854, ISSN 0306-7319	3	15.00
M23	Rad u međunarodnom časopisu Rad u međunarodnom časopisu Nikolić A., Gobor L., Despotović V., Adamović (Majkić) S.: Excess molar volumes of N–methylformamide + tetrahydrofuran, + 2–butanone, + ethylacetate at the temperatures between 303.15 K and 318.15 K, Journal of Molecular Liquids, 2006, No. 126, pp. 95-98, ISSN 0167-7322 Kiurski J., Adamović (Majkić) S., Oros I., Krstić J., Kovačević I.: Adsorption feasibility in the Cr(total) Ions Removal from Waste Printing Developer, Global Nest Journal, 2012, Vol. 14, No. 1, pp. 18-23, ISSN 1790-7632 Đurđević S., Novaković D., Adamović (Majkić) S., Kašiković N., Milić N., Štrbac B., Hadžistević M.: COLORIMETRIC CHANGES OF THERMOCHROMIC INK PRINTED ON SMART TEXTILE MATERIALS EXPOSED TO DIFFERENT HEAT TRANSFER METHODS, Tekstil ve konfeksiyon, 2019, Vol. 29, No. 4, pp. 336-343, ISSN 1300-3356 Pinćjer I., Tomić I., Adamović (Majkić) S., Miketić N.: Distance Learning: Should We Go Interactive At Any Cost?, International Journal of Engineering Education, 2022, Vol. 38, No. 2, pp. 299-309, ISSN 0949-149X Samardžić S., Mihailović A., Adamović (Majkić) S., Adamović D., Banjanin B., Rajs V., Lakatoš R.: Noise and lighting as physical stressors in a printing laboratory - A case study, Environmental Engineering and Management Journal, 2023, Vol. 22, No. 3, pp. 595-606, ISSN 1582-9596	5	15.00
M33	Saopštenje sa međunarodnog skupa štampano u celini Saopštenje sa međunarodnog skupa štampano u celini Nikolić A., Gobor L., Petrović S., Adamović (Majkić) S.: N–H•••O hydrogen bonding: FT IR study of N–butylacetamide–ether systems, 7. International Conference on Fundamental and Applied Aspects of Physical Chemistry, Beograd, 21-23 September, 2004, pp. 158-160 Kiurski J., Oros I., Krstić J., Adamović (Majkić) S., Vojinović-Miloradov M., Mihailović A., Samardžić S.: The spectrochemical analysis of waste printing inks, 18. International Scientific and Professional Meeting Ecological Truth (EcoIst), Apatin: University of Belgrade - Technical Faculty Bor, 1-4 June, 2010, pp. 126-132, ISBN 978-86-80987-79-1 Prica M., Kiurski J., Adamović (Majkić) S.: The incorporation potential of lead and zinc from contaminated sediment in a clay-based material, 10. International Conference on Fundamental and Applied Aspects of Physical Chemistry, Beograd: Society of Physical Chemists of Serbia, 22 September, 2010, pp. 576-578, ISBN 978-86-82475-18-7 Kiurski J., Obadović D., Cvetinov M., Adamović (Majkić) S., Oros I., Krstić J.: Absorption spectra as the indicator of fountain solution aging, 10. International Conference on Fundamental and Applied Aspects of Physical Chemistry, Beograd: Society of Physical Chemists of Serbia, 22 September, 2010, pp. 591-593, ISBN 978-86-82475-18-7 Kiurski J., Krstić J., Oros I., Adamović (Majkić) S., Vojinović-Miloradov M.: Waste printing inks as a pollutant of graphic environment, 5. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: Fakultet tehničkih nauka, Novi Sad, 11-12 November, 2010, pp. 207-210, ISBN 978-86-7892-294-7 Prica M., Kiurski J., Adamović (Majkić) S.: Lack of waste treatments in printing industry in Serbia, 18. International Scientific and Professional Meeting Ecological Truth (EcoIst), Apatin: University of Belgrade, Technical Faculty Bor, 1-4 June, 2010, pp. 126-132, ISBN 978-86-80987-79-1 Kiurski J., Adamović (Majkić) S., Krstić J., Oros I., Kovačević I., Mihailović A., Samardžić S.: Removal of Cu(II) ion from waste printing developer, 19. International Scientific and Professional Meeting "ECOLOGICAL TRUTH" ECO-IST, Bor: University of Belgrade, technical Faculty Bor, 1-4 June, 2011, pp. 103-109, ISBN 978-86-80987-84-2 Kiurski J., Krstić J., Oros I., Adamović (Majkić) S., Turk Sekulić M., Mihailović A., Petrović (Đogo) M.: Emission reduction and economic effects of using eco-friendly chemicals in printing, 11. The international conference Engineering of Environment Protection, Bratislava: Slovak University of Technology in Bratislava, faculty of Mechanical Engineering, 14-16 June, 2011, pp. 143-148, ISBN 978-80.227-3519-3 Kiurski J., Adamović (Majkić) S., Oros I., Krstić J., Adamović D.: Formaldehyde in screen printing indoor, 17. Int. Symp. on Analytical and Environmental Problems, Szeged: SZAB Kémiai Szakbizottság Analitikai és Környezetvédelmi Munkabizottsága, 19 September, 2011, pp. 189-192, ISBN 978-963-315-066-5 Kiurski J., Petrović (Đogo) M., Turk Sekulić M., Adamović (Majkić) S., Oros I., Krstić J., Vojinović-Miloradov M.: Wastewater characterisation of screen printing, 17. Int. Symp. on Analytical and Environmental Problems, Szeged: SZAB Kémiai Szakbizottság Analitikai és Környezetvédelmi Munkabizottsága, 19 September, 2011, pp. 172-175, ISBN 978-963-315-066-5 Kiurski J., Oros I., Adamović (Majkić) S., Čomić L.: The composition of sheet-fed offset printing inks, 12. Eco-Ist’12, Zaječar: University of Belgrade, Technical Faculty in Bor, 30-2 May, 2012, pp. 200-205, ISBN 978-86-80987-98-9 Adamović D., Kiurski J., Adamović (Majkić) S., Oros I., Krstić J., Kovačević I.: Waste management Assessment in Screen Printing, 18. International Conference "Engineering for Environment Protection" – TOP, Bratislava: Slovak University of Technology in Bratislava, faculty of Mechanical Engineering, 26-28 June, 2012, pp. 7-12, ISBN 978-80-227-3723-4 Adamović D., Dorić J., Vojinović-Miloradov M., Turk Sekulić M., Radonić (Jakšić) J., Krajinović S., Adamović (Majkić) S.: BTEX in the exhaust emissions of motor vehicles, 1. Global Conference on Global Warming, Istanbul: Istanbul Technical University (ITU) / International Association for Hydrogen Energy, 8-12 July, 2012, pp. 1165-1171, ISBN ISBN 978-605-89885-1 Adamović (Majkić) S., Rajić Lj., Prica M., Milošević R., Puškarević I., Zorić V.: Electrocoagulation/Electroflotation Treatment of Offset Printing Developers, 6. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: Faculty of Technical Sciences, Department of Graphic Engineering and Desing, Novi Sad, 15-16 November, 2012, pp. 293-297, ISBN 978-86-7892-457-6 Prica M., Dalmacija B., Pešić V., Milošević R., Banjanin B., Zorić V., Adamović (Majkić) S.: Possibility of using cardboard mill sludge in immobilization of copper from contaminated sediment, 6. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: Faculty of Technical Sciences, Department of Graphic Engineering and Desing, Novi Sad, 15-16 November, 2012, pp. 317-320, ISBN 978-86-7892-457-6 Prica M., Bečelić-Tomin M., Dalmacija B., Adamović (Majkić) S., Pešić V., Kerkez Đ., Kašiković N.: Integrated Pollution Prevention Control in Small and Medium Printing Houses in Vojvodina (Serbia), 7. INTERNATIONAL SCIENCE CONFERENCE REPORTING FOR SUSTAINABILI, Bečići: The Regional Environmental Center for Central and Eastern Europe, Country Office Serbia, 7-10 May, 2013, pp. 359-363, ISBN 978-86-7550-070-4 Prica M., Kovač P., Dalmacija M., Dalmacija B., Adamović (Majkić) S., Tomašević D.: Lead Leaching Mechanism from Mixtures Stabilized with Cardboard Mill Sludge, 19. International Conference "Engineering for Environment Protection" – TOP, Časta-Papiernička: Faculty of Mechanical Engineering STU in Bratislava, 11-13 June, 2013, pp. 291-296, ISBN 978-80-227-3955-9 Prica M., Kovač P., Dalmacija M., Dalmacija B., Adamović (Majkić) S., Krčmar D.: Stabilization Degree Evaluation of Stabilized Products with Cardboard Mill Sludge, 19. International Conference "Engineering for Environment Protection" – TOP, Časta-Papiernička: Faculty of Mechanical Engineering STU in Bratislava, 11-13 June, 2013, pp. 297-303, ISBN 978-80-227-3955-9 Adamović D., Radonić (Jakšić) J., Vojinović-Miloradov M., Adamović (Majkić) S., Prica M., Petrović (Đogo) M., Turk Sekulić M.: Waste Water Management in the Meat Industry, 19. International Conference "Engineering for Environment Protection" – TOP, Časta-Papiernička: Slovak University of Technology Bratislava, 11-13 June, 2013, pp. 1-6, ISBN 978-80-227-3955-9 Adamović (Majkić) S., Prica M., Dalmacija B., Rajić Lj., Adamović D.: Removal of Copper Ions Present in Waste Offset Printing Developer by Electrocoagulation–Electroflotation Process, 11. Seminar in Graphic Arts, Pardubice: University of Pardubice, Faculty of Chemical Technology Department of Graphic Arts and Photophysics, 17-18 June, 2013, pp. 97-101 Adamović (Majkić) S., Prica M., Rajić Lj., Dalmacija B., Tričković J., Adamović D., Novaković D.: Elecrocoagulation/Electro-Flotacion Removal of Turbidity from Industrial Waste Printing Developer, 19. International Symposium on Analytical and Environmental Problems, Szeged: SZAB Kémiai Szakbizottság Analitikai és Környezetvédelmi Munkabizottsága, 23 September, 2013, pp. 76-79, ISBN 978-963-315-141-9 Prica M., Dalmacija M., Dalmacija B., Krčmar D., Tomašević D., Novaković D., Adamović (Majkić) S.: Cardboard Mill Sludge Stabilization Potential, 19. International Symposium on Analytical and Environmental Problems, Szeged: SZAB Kémiai Szakbizottság Analitikai és Környezetvédelmi Munkabizottsága, 23 September, 2013, pp. 84-87, ISBN 978-963-315-141-9 Prica M., Novaković D., Adamović (Majkić) S., Dedijer S., Pavlović Ž., Karlović I., Kašiković N.: Environmental problems in printing industry in Serbia, 4. International Joint Conference on Environmental and Light Industry Technologies, Budimpešta: Sandor Rejto Faculty of Light Industry and Environmental Engineering, Obuda University, 20-22 November, 2013, pp. 409-415, ISBN 978-615-5018-93-0 Adamović D., Mihajlović I., Pap S., Vojinović-Miloradov M., Radonić (Jakšić) J., Turk Sekulić M., Adamović (Majkić) S.: Application of adsorption process in the treatment of meat industry waste water, 19. International Symposium on Analytical and Environmental Problems, Szeged: SZAB Kémiai Szakbizottság Analitikai és Környezetvédelmi Munkabizottsága, 23 September, 2013, pp. 241-244, ISBN 978-963-315-141-9 Adamović (Majkić) S., Prica M., Dalmacija B., Rajić Lj., Tričković J., Adamović D., Maletić S.: The Electrocoagulation/Flotation Removal of Copper from the Waste Fountain Solution by using Electrodes of Iron and Aluminum, 20. 20th International Symposium on Analytical and Environmental Problems, Szeged: SZAB Kémiai Szakbizottság Analitikai és Környezetvédelmi Munkabizottsága, 22 September, 2014, pp. 106-109, ISBN 978-963-12-1161-0 Prica M., Adamović (Majkić) S., Radonić (Jakšić) J., Turk Sekulić M., Novaković D., Adamović D., Maletić S.: The Printed Graphic Products Waste – A Potential Source of Metals at Landfills, 20. 20th International Symposium on Analytical and Environmental Problems, Szeged: SZAB Kémiai Szakbizottság Analitikai és Környezetvédelmi Munkabizottsága, 22 September, 2014, pp. 110-113, ISBN 978-963-12-1161-0 Adamović D., Vojinović-Miloradov M., Dorić J., Adamović (Majkić) S., Mihajlović I.: Benzene Emission During NEDC, 20. 20th International Symposium on Analytical and Environmental Problems, Szeged: SZAB Kémiai Szakbizottság Analitikai és Környezetvédelmi Munkabizottsága, 22 September, 2014, pp. 102-105, ISBN 978-963-12-1161-0 Adamović (Majkić) S., Prica M., Radonić (Jakšić) J., Turk Sekulić M., Adamović D., Maletić S.: The Leaching of Zinc from Printed Graphic Product Waste, 7. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: Faculty of Technical Sciences, Department of Graphic Engineering and Design, 13-14 November, 2014, pp. 375-378, ISBN 978-86-7892-645-7 Adamović (Majkić) S., Kovač P., Prica M., Novaković D., Dalmacija B., Rajić Lj., Krčmar D.: The kinetics of organic substances removal from the waste offset printing developer by the electrocoagulation/flotation with a combination of electrodes, 20. Conference Engineering of Environment Protection - TOP2014, Bratislava: Slovak University of Technology in Bratislava, 10-12 June, 2014, pp. 1-6, ISBN 978-80-227-4174-3 Prica M., Kovač P., Adamović (Majkić) S., Radonić (Jakšić) J., Turk Sekulić M., Maletić S., Adamović D.: Assessing the effects of nickel from printed graphic products waste on the soil after their disposal, 20. Conference Engineering of Environment Protection - TOP2014, Bratislava: Slovak University of Technology in Bratislava, 10-12 June, 2014, pp. 411-416, ISBN 978-80-227-4174-3 Adamović D., Vojinović-Miloradov M., Dorić J., Miloradov M., Adamović (Majkić) S.: Optimal Working Regime of IC Engine from the Point of Emission Characteristics, 12. International Scientific Conference "Flexible Technologies" - MMA, Andrevlje: Faculty of Technical Sciences, Departmant of Production Engineering, 25-26 September, 2015, pp. 207-210, ISBN 978-86-7892-722-5 Adamović (Majkić) S., Prica M., Dalmacija B., Tričković J., Kragulj Isakovski M., Maletić S., Adamović D.: The Combined Electrocoagulation/Flotation and Adsorption Processes for Organic Substances Regeneration of Waste Printing Developer, 21. Symposium on Analytical and Environmental Problems, Szeged: SZAB Kémiai Szakbizottság Analitikai és Környezetvédelmi Munkabizottsága, Szeged, 28 September, 2015, pp. 83-86, ISBN 978-963-306-411-5 Prica M., Adamović (Majkić) S., Radonić (Jakšić) J., Turk Sekulić M., Velimirović M., Tričković J.: Potential Impact of Engineered Nanomaterials Release into Environment, 21. Symposium on Analytical and Environmental Problems, Szeged: SZAB Kémiai Szakbizottság Analitikai és Környezetvédelmi Munkabizottsága, Szeged, 28 September, 2015, pp. 269-272, ISBN 978-963-306-411-5 Adamović D., Vojinović-Miloradov M., Radonić (Jakšić) J., Turk Sekulić M., Adamović (Majkić) S.: Pollution from Meat Processing Factories, 21. Symposium on Analytical and Environmental Problems, Szeged: SZAB Kémiai Szakbizottság Analitikai és Környezetvédelmi Munkabizottsága, Szeged, 28 September, 2015, pp. 79-82, ISBN 978-963-306-411-5 Adamović D., Vojinović-Miloradov M., Dorić J., Adamović (Majkić) S.: Urban Driving and Emission of Carcinogenic Substances, 5. Towards a humane city, Novi Sad: Faculty of Technical Sciences, 5-6 November, 2015, pp. 433-437, ISBN 978-86-7892-739-3 Adamović D., Radonić (Jakšić) J., Turk Sekulić M., Adamović (Majkić) S., Vojinović-Miloradov M.: VOC in municipal waste landfill, 7. ISWA World Congress, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, Department of Environmental Engineering, Serbian Solid Waste Association , 19-21 September, 2016, pp. 1651-1657, ISBN 978-86-7892-837-6 Mihailović A., Vujić (Francuski) B., Ninkov J., Vučinić-Vasić M., Milić S., Adamović (Majkić) S., Lakatoš R.: Available concentrations of Cu, Mn, Ni, Pb and Zn in soils near urban roads, 5. International Conference „Ecology of Urban Areas 2016“, Zrenjanin: University of Novi Sad, Faculty of Technical Sciences “Mihajlo Pupin”, 30 September, 2016, pp. 195-200, ISBN 978-86-7672-291-4 Adamović (Majkić) S., Prica M., Kerkez Đ., Tričković J., Maletić S., Adamović D., Velimirović M.: The immobilization of copper from waste printing developer sludge, 22. International Symposium on Analytical and Environmental Problems, Segedin: SZAB Kémiai Szakbizottság Analitikai és Környezetvédelmi Munkabizottsága, Szeged, 10 October, 2016, pp. 270-273, ISBN 978-963-306-507-5 Adamović D., Vojinović-Miloradov M., Adamović (Majkić) S., Radonić (Jakšić) J., Turk Sekulić M., Pap S., Obrovski B.: Cancer risk assessment of anatomy laboratory workers, 22. International Symposium on Analytical and Environmental Problems, Segedin: SZAB Kémiai Szakbizottság Analitikai és Környezetvédelmi Munkabizottsága, Szeged, 10 October, 2016, pp. 62-65, ISBN 978-963-306-507-5 Adamović (Majkić) S., Prica M., Kerkez Đ., Maletić S., Beljin J., Velimirović M.: The characterization of waste offset developer sludge treated by solidification/stabilization, 8. International Symposium on Graphic Engineering and Design, GRID, Novi Sad, 3-4 November, 2016, pp. 165-168, ISBN 978-86-78928-67-3 Pinćjer I., Nedeljković U., Dimovski V., Adamović (Majkić) S.: Student Responses to Interactive Learning Trough Various Multimedia Content, 8. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: Univerzitet u Novom Sadu, Fakultet tehničkih nauka, 3-4 November, 2016, pp. 473-480, ISBN 9788678928673 Adamović D., Vojinović-Miloradov M., Adamović (Majkić) S., Radonić (Jakšić) J., Turk Sekulić M., Obrovski B.: Exposure to formaldehyde in anatomy laboratory, 11. Savjetovanje hemičara i tehnologija Republike Srpske, Teslić: University in Banjaluka, Faculty of Technology, 18-19 November, 2016, pp. 611-617, ISBN 978-99938-54-67-8 Adamović (Majkić) S., Prica M., Adamović D., Mihailović A., Dalmacija B., Maletić S., Beljin J.: The influence of electrode combinations on the kinetics removal of organic substances from the printing effluent, 23. International Symposium on Analytical and Environmental Problems (ISAEP), Szeged: University of Szeged, Department of Inorganic and Analytical Chemistry, H-6720 Szeged, Dóm tér 7, Hungary, 9-10 October, 2017, pp. 82-86, ISBN 978-963-306-563-1 Adamović D., Vojinović-Miloradov M., Adamović (Majkić) S., Radonić (Jakšić) J., Turk Sekulić M., Pap S., Obrovski B.: Cities as pollution hotspots, 6. Towards a humane city, Novi Sad: Department of traffic engineering, Faculty of technical sciences, University of Novi Sad, 26-27 October, 2017, pp. 241-245, ISBN 978-86-7892-962-5 Banjanin B., Vladić G., Bošnjaković G., Adamović (Majkić) S., Kašiković N.: Influence of post-treatment methods on mechanical properties of PLA parts fabricated by fused deposition modeling, 5. International Scientific Conference on Advances in Mechanical Engineering – ISCAME, Debrecen: Department of Mechanical Engineering, Faculty of Engineering, University of Debrecen, 12-14 October, 2017, pp. 41-47, ISBN 978-963-473-304-1 Adamović (Majkić) S., Mihailović A., Adamović D.: Emissions of total volatile organic compounds during the digital printing process, 24. International Symposium on Analytical and Environmental Problems, Szeged: University of Szeged, Department of Inorganic and Analytical Chemistry, H-6720 Szeged, Dóm tér 7, Hungary, 8-9 October, 2018, pp. 65-68, ISBN 978-963-306-623-2 Adamović D., Vojinović-Miloradov M., Močević V., Radonić (Jakšić) J., Turk Sekulić M., Adamović (Majkić) S., Pap S.: Engine carbon cleaning as the way of environmental protection, 24. International Symposium on Analytical and Environmental Problems, Szeged: University of Szeged, Department of Inorganic and Analytical Chemistry, H-6720 Szeged, Dóm tér 7, Hungary, 8-9 October, 2018, pp. 235-238, ISBN 978-963-306-623-2 Adamović (Majkić) S., Pinćjer I., Adamović D., Zorić V., Đurđević S.: The impact of digital printing machines on indoor air quality, 9. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: Univerzitet u Novom Sadu, Fakultet tehničkih nauka, Grafičko inženjerstvo i dizajn , 8-10 November, 2018, pp. 39-43, ISBN 978-86-6022-115-7 Đurđević S., Novaković D., Adamović (Majkić) S., Boadu F., Adriana R., Zeljković Ž.: DEVELOPING AUGMENTED REALITY APP FOR SMART PACKAGING, 9. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: Univerzitet u Novom Sadu, Fakultet tehničkih nauka, Grafičko inženjerstvo i dizajn, 8-10 November, 2018, pp. 435-443, ISBN 978-86-6022-115-7 Banjanin B., Vladić G., Pál (Apro) M., Dimovski V., Adamović (Majkić) S., Bošnjaković G.: Production factors influencing mechanical and physical properties of FDM printed embossing dies, 9. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: University of Novi Sad, Faculty of technical sciences, Department of graphic engineering and design, 8-10 November, 2018, pp. 225-236, ISBN 978-86-6022-115-7 Mihailović A., Samardžić S., Ralević N., Ninkov J., Adamović (Majkić) S., Lakatoš R.: APPLICATION OF MULTIVARIATE STATISTICAL TECHNIQUES (CA AND PCA) IN ANALYSIS AND EVALUATION OF HEAVY METALS IN URBAN SOIL, 9. International Conference Industrial Engineering and Environmental Protection - IIZS, Zrenjanin: Technical faculty ''Mihajlo Pupin'', Zrenjanin, Serbia, 3-4 October, 2019, pp. 487-491, ISBN 978-86-7672-324-9 Dramićanin M., Baloš S., Janjatović P., Rajnović D., Adamović (Majkić) S.: Effect of particle size TiO2 Flux in A-TIG welding, 14. Multinational Congress on Microscopy (MCM), Beograd, 15-20 September, 2019, pp. 362-364, ISBN 978-86-80335-11-7 Samardžić S., Lakatoš R., Mihailović A., Janković A., Rakić S., Adamović (Majkić) S., Adamović D.: Analysis of sound levels of food courts and coffee houses at University campus in Novi Sad, 10. International Conference Industrial Engineering and Environmental Protection - IIZS, Zrenjanin: Technical faculty “Mihajlo Pupin”, Zrenjanin, University of Novi Sad, 8-9 October, 2020, pp. 330-334, ISBN 978-86-7672-340-9 Adamović (Majkić) S., Pinćjer I., Banjanin B., Đurđević S., Miketić N.: The evaluation of the organic load of the waste offset developer with extraction methods, 10. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, Department of Graphic Engineering and Design, 12-14 November, 2020, pp. 199-203, ISBN 978-86-6022-302-1 Banjanin B., Pál (Apro) M., Dimovski V., Adamović (Majkić) S., Lilić A.: 3D printing in the education of graphic engineering and design students, 10. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: University of Novi Sad, Faculty of technical sciences, Department of graphic engineering and design, 12-14 November, 2020, pp. 457-468, ISBN 978-86-6022-302-1, UDK: 655(082), 7.05:655(082) Pinćjer I., Miketić N., Tomić I., Adamović (Majkić) S.: EXPLORING THE VARIOUS PARAMETERS OF CO2 LASER IN THE CUTTING OF PAPER, 10. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: UNIVERSITY OF NOVI SAD FACULTY OF TECHNICAL SCIENCES DEPARTMENT OF GRAPHIC ENGINEERING AND DESIGN, 12-14 November, 2020, pp. 261-268, ISBN 978-86-6022-302-1 Pinćjer I., Miketić N., Tomić I., Adamović (Majkić) S.: Enhancing the learning of 3D modeling through the use of video games, 20. WPP PA - Wood, Pulp & Paper Polygrafia Academica 2020, Bratislava: Slovenská chemická knižnica FCHPT STU v Bratislave, 11-12 March, 2020, pp. 146-151, ISBN 978-80-8208-036-3 Tomić I., Pinćjer I., Adamović (Majkić) S., Dedijer S., Milić N.: Challenges and advantages of online teaching during Covid-19 pandemic, 8. IJCELIT 2021 -INTERNATIONAL JOINT CONFERENCE ON ENVIRONMENTAL AND LIGHT INDUSTRY TECHNOLOGIES, Budimpešta: Rejtő Sándor Faculty of Light Industry and Environmental Engineering, Óbuda University, 18-19 November, 2021, pp. 89-93, ISBN 978-963-449-262-7 Dramićanin M., Janjatović P., Adamović (Majkić) S., Kulundžić N., Zabunov I., Rajnović D., Baloš S.: Influence of Micro and Nano Particles on the Performance of Activated Tungsten Inert Gas Welding, 14. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad, 23-25 September, 2021, pp. 177-180, ISBN 978-86-6022-364-9 Adamović (Majkić) S., Mihailović A., Adamović D.: Contribution of flexographic printing process to ground-level ozone concentrations, 11. INTERNATIONAL SYMPOSIUM ON GRAPHIC ENGINEERING AND DESIGN, Novi Sad: University of Novi Sad, Faculty of technical sciences, Department of graphic engineering and design, 3-5 November, 2022, pp. 793-796, ISBN 978-86-6022-533-9 Tomić I., Pinćjer I., Miketić N., Adamović (Majkić) S.: Artificial intelligence in printing, 11. INTERNATIONAL SYMPOSIUM ON GRAPHIC ENGINEERING AND DESIGN, Novi Sad: Faculty of Technical Sciences, Department of Graphic Engineering and Design, 3-5 November, 2022, pp. 453-458, ISBN 978-86-6022-533-9 Banjanin B., Milić N., Milošević R., Adamović (Majkić) S., Pál (Apro) M.: Video games as a learning tool - potential applications in the Graphic engineering and design studies, 11. INTERNATIONAL SYMPOSIUM ON GRAPHIC ENGINEERING AND DESIGN, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, Department of Graphic Engineering and Design, 3-5 November, 2022, pp. 617-625, ISBN 978-86-6022-533-9 Adamović D., Vujić G., Adamović (Majkić) S.: Particulate matter at an open dumping site, 19. International Conference “Man and Working Environment” - Occupational and Environmental Safety Engineering & Management (OESEM), Niš: University of Niš, Faculty of Occupational Safety, 24-25 November, 2022, pp. 165-169, ISBN 978-86-6093-112-4 Tomić I., Jurič (Rilovski) I., Dedijer S., Adamović (Majkić) S.: Artificial intelligence in graphic design, 54. Annual Scientific Conference of the International Circle of Educational Institutes of Graphic-Media Technology and Management, Wuppertal: Helgramed, 18-20 September, 2023, pp. 85-93, ISBN 978-618-81734-4-6 Mihailović A., Lakatoš R., Samardžić S., Adamović (Majkić) S., Ninkov J., Adamović D., Milić S.: Content of potentially toxic elements in soil of urban parks in Novi Sad, 13. International Conference Industrial Engineering and Environmental Protection - IIZS, Zrenjanin: Technical Faculty “Mihajlo Pupin”, Zrenjanin, University of Novi Sad, Đure Đakovića bb, 23101 Zrenjanin, Republic of Serbia, 5-6 October, 2023, pp. 344-349, ISBN 978-86-7672-368-3 Adamović D., Crnjak C., Adamović (Majkić) S.: Particulate matter in the indoor air of a bakery, 1. FIRST INTERNATIONAL EUROSA CONFERENCE - EUROSA2023, Brzeće: Faculty of Technical Sciences Trg Dositeja Obradovića 6, Novi Sad, Republic of Serbia, 12-15 September, 2023, pp. 1-7, ISBN 978-86-6022-621-3 Adamović (Majkić) S., Milošević R., Banjanin B., Tomić I., Gvoka T.: Chemical resistance analysis of inkjet printed ceramic tiles, 4. International Printing Technologies Symposium, Istambul: Printing Industry Education Foundation, Istanbul, Turkey, 5-6 October, 2023, pp. 105-109, ISBN 978-605-70806-3-9 Milošević R., Adamović (Majkić) S., Komlenić A., Banjanin B., Menzildžić D., Dimovski V.: EVALUATING THE IMPERATIVE OF SOCIAL MEDIA PRESENCE FOR B2B PRINT INDUSTRY BUSINESSES, 4. International Printing Technologies Symposium, Istambul: Printing Industry Education Foundation (BASEV) Bu kitap Basim Sanayi Egitim Vakfi (BASEV) tarafindan yayinlanmiştir, 5-6 October, 2023, pp. 281-285, ISBN 978-605-70806-3-9 Banjanin B., Milić N., Kerac J., Milošević R., Adamović (Majkić) S.: Applications of real-time rendering game engine in education through practices and initiatives, 7. Politehnika, Beograd: The Academy of Applied Technical Studies Belgrade, 15 December, 2023, pp. 526-531, ISBN 978-86-7498-110-8	69	69.00
M34	Saopštenje sa međunarodnog skupa štampano u izvodu Saopštenje sa međunarodnog skupa štampano u izvodu Kiurski J., Prica M., Adamović (Majkić) S., Oros I., Krstić J.: The possibility of metal removal from used printing developer by natural zeolite and activated carbon, 20. Annual Meeting of the Society Of Enviromental Toxicology and Chemistry (SETAC), Seville: SETAC Europe, 23-27 May, 2010, pp. 248-248 Kiurski J., Adamović D., Krstić J., Oros I., Adamović (Majkić) S., Mihailović A., Samardžić S.: The influence of formaldehyde on printing indoor, 12. Danube-Kris-Mures-Tisa Euroregion Conference on Food, Environment and Health, Novi Sad: Tehnološki fakultet Novi Sad, 14-15 September, 2010, pp. 69-69, ISBN 978-86-80995-84-7 Kiurski J., Adamović (Majkić) S., Oros I., Krstić J., Samardžić S., Mihailović A.: Removal efficiency of Zn(II) ions from waste printing developer, 7. Aegean Analytical Chemistry Days (AACD), Mytilene: The Association of Greek Chemists ( North Aegean Branch), 29-3 September, 2010, pp. 249-249 Adamović D., Kiurski J., Petrović (Đogo) M., Adamović (Majkić) S., Vojinović-Miloradov M.: VOC emissions in offset printing plants, 11. 11th European Meeting on Environmental Chemistry (EMEC 11), Portorož: University of Nova Gorica in cooperation with European Association of Chemistry and the Environment., 8-11 December, 2010, pp. 41-41, ISBN 978-961-6311-66-3 Kiurski J., Adamović D., Oros I., Krstić J., Adamović (Majkić) S.: Ozone and volatile organic compounds as prominent pollutants of printing indoor, 21. SETAC Europe 21st Annual Meeting, Milano: Society of Environmental Toxicology and Chemistry Europe, 15-19 May, 2011, pp. 257-257 Kiurski J., Ranogajec J., Pašalić S., Vučetić (Petrović) S., Zorić D., Oros I., Adamović (Majkić) S.: Clay Derıvatıve Materıals wıth Polymer Addıtıon as Adsorbent for Zn(Iı) Ion Removal from Prıntıng Developer, 2. EUROCLAY 2011 Clay science at the crossroad of civilizations, Antalya: European clays groups association & Turkish national committee on clay science, 26-1 June, 2011, pp. 266-267 Adamović D., Kiurski J., Adamović (Majkić) S., Turk Sekulić M.: Exposure to organic solvents in printing plants, 2. INDUSTRAIL ENERGY AND ENVIRONMENTAL PROTECTION IN SOUTHERN EUROPE, Kopaonik: Drustvo termicara Srbije, 21-25 June, 2010, pp. 38-39, ISBN 978-86-7877-022-7 Kiurski J., Ranogajec J., Zorić D., Adamović (Majkić) S., Oros I., Krstić J.: A Modified Clay Material as Cost-Effective Sorbent for Waste Printing Developer Decontamination, 6. SETAC World Congress, SETAC Europe 22nd Annual Meeting, Berlin: SETAC Europe, 20-24 May, 2012, pp. 295-296 Adamović D., Radonić (Jakšić) J., Adamović (Majkić) S., Vojinović-Miloradov M., Pap S., Turk Sekulić M., Prica M.: Formaldehyde in ambient air of anatomy laboratory, 14. International Conference on Chemistry and the Environment (ICCE), Barcelona: Division of Chemistry and the Environment (DCE) of the European Association of Chemical and Molecular Sciences (EuCheMS); IEC, Institut d’Estrudis Catalans, 25-28 June, 2013, pp. 80-80, UDK: Zbornik na cd Adamović D., Vojinović-Miloradov M., Dorić J., Radonić (Jakšić) J., Adamović (Majkić) S., Raspopović N.: Benzene in motor vehicle exhaust, 14. European Meeting on Environmental Chemistry (14th EMEC), Budva: Nacionalna biblioteka Crne Gore, 4-7 December, 2013, pp. 81-82, ISBN 978-9940-9059-1-0 Adamović (Majkić) S., Kovač P., Prica M., Pavlović Ž., Stančić M.: The success of electrocoagulation/flotation treatment in removing turbidity from waste fountain solution, 21. TOP 2015-Engineering of environment protection, Bratislava: Slovak University of Technology in Bratislava, 23-25 June, 2015, pp. 18-18, ISBN 978-80-227-4376-1 Prica M., Kovač P., Tričković J., Adamović (Majkić) S., Velimirović M.: Engineered nanomaterials in waste streams, 21. TOP 2015-Engineering of environment protection, Bratislava: Slovak University of Technology in Bratislava, 23-25 June, 2015, pp. 64-64, ISBN 978-80-227-4376-1 Adamović D., Vojinović-Miloradov M., Miloradov M., Dorić J., Adamović (Majkić) S., Radonić (Jakšić) J., Turk Sekulić M.: Residual toluene concentrations in exhaust gas waste stream, 21. TOP 2015-Engineering of environment protection, Bratislava: Slovak University of Technology in Bratislava, 23-25 June, 2015, pp. 17-17, ISBN 978-80-227-4376-1 Adamović D., Vojinović-Miloradov M., Adamović (Majkić) S., Radonić (Jakšić) J., Turk Sekulić M., Pap S.: Occupational exposure to formaldehyde, 22. International Scientific Conference –Engineering for Environment Protection-TOP 2016, Bratislava: Slovak University of Technology in Bratislava, 7-9 June, 2016, pp. 9-9, ISBN 978-80-227-4568-0 Mihailović A., Ninkov J., Lončarević I., Samardžić S., Adamović (Majkić) S., Milić S., Lakatoš R.: Concentration of As, Co, Cr and Ni in urban soil in Novi Sad, Serbia, 5. International Conference on Radiation and Applications in Various Fields of Research, Budva, 12-16 June, 2017, pp. 94-94, ISBN 978-86-80300-02-3 Mihailović A., Ninkov J., Vučinić-Vasić M., Lončarević I., Adamović (Majkić) S., Lakatoš R., Ralević N.: A study of lead contamination in the urban soil in Novi Sad, Serbia, 5. International Conference on Radiation and Applications in Various Fields of Research, Budva, 12-16 June, 2017, pp. 93-93, ISBN 978-86-80300-02-3 Adamović D., Vojinović-Miloradov M., Dorić J., Adamović (Majkić) S., Obrovski B., Radonić (Jakšić) J., Turk Sekulić M.: Benzene concentration levels in exhaust gas of experimental engine, 23. International Scientific Conference "Engineering for Environment Protection" – TOP, Šamorin-Čilistov: Slovak University of Technology, 20-22 September, 2017, pp. 1-1, ISBN 978-80-227-4731-8 Bežanović V., Adamović D., Novaković M., Adamović (Majkić) S., Radonić (Jakšić) J., Turk Sekulić M., Pap S.: Removal of methylene blue dye from printing industry simulated sample using the alternative adsorbent in the continuous fixed-bed column, 8. International Conference Water for all, Osijek: Sveučilište Josipa Jurja Strossmayera u Osijeku, Prehrambeno-tehnološki fakultet Osijek, 21-22 March, 2019, pp. 73-73, ISBN 978 - 953 - 7005 - 5 Adamović (Majkić) S., Rajs V., Mihailović A., Pinćjer I., Tomić I.: Adsorption removal of anionic surface-active agents from the waste fountain solution, 26. International Symposium on Analytical and Environmental Problems, Segedin: University of Szeged, Department of Inorganic and Analytical Chemistry, H-6720 Szeged, Dóm tér 7, Hungary, 23-24 November, 2020, pp. 84-85, ISBN 978-963-306-771-0 Tomić I., Pinćjer I., Dedijer S., Adamović (Majkić) S., Milić N.: Survey on online teaching in graphic engineering and design in a time of pandemic, 52. 52nd Annual scientific conference of the International Circle of Educational Institutes of Graphic-Media Technology and Management, Athens: The Hellenic Union of Graphic Arts and Media Technology Engineers, 20-24 September, 2021, pp. 85-85 Adamović (Majkić) S., Rajs V., Adamović D., Mihailović A., Pinćjer I., Tomić I., Dramićanin M.: Electrocoagulation removal of heavy metals from wastewater generated by washing a screen printing plate, 27. International Symposium on Analytical and Environmental Problems (ISAEP), Segedin: University of Szeged, Department of Inorganic and Analytical Chemistry, H-6720 Szeged, Dóm tér 7, Hungary, 22-23 November, 2021, pp. 78-79, ISBN 978-963-306-835-9 Adamović D., Jovanović T., Adamović (Majkić) S., Radonić (Jakšić) J., Turk Sekulić M.: PM Emissions Generated During Pork Meat Frying, 21. European Meeting on Environmental Chemistry, Novi Sad: Serbian Chemical Society; Karnegijeva 4/III, Belgrade, Republic of Serbia, 30-3 November, 2021, pp. 136-136, ISBN 978-86-7132-078-8 Adamović (Majkić) S., Rajs V., Adamović D., Tomić I., Pinćjer I., Dramićanin M.: Disadvantages of electrocoagulation-flotation treatment of offset printing effluents, 28. International Symposium on Analytical and Environmental Problems, Szeged: University of Szeged, H-6720 Szeged, Dugonics tér 13, Hungary, 14-15 November, 2022, pp. 61-62, ISBN 978-963-306-904-2 Mihailović A., Ninkov J., Vasin J., Samardžić S., Lakatoš R., Ralević N., Adamović (Majkić) S.: Metal content in the surface soils of industrial areas in Novi Sad, 28. International Symposium on Analytical and Environmental Problems, Szeged: University of Szeged, H-6720 Szeged, Dugonics tér 13, Hungary, 14-15 November, 2022, pp. 228-231, ISBN 978-963-306-904-2 Adamović D., Turk Sekulić M., Radonić (Jakšić) J., Adamović (Majkić) S.: Unregulated landfills as sources of PM emissions, 22. European Meeting on Environmental Chemistry (EMEC22), Ljubljana: University of Ljubljana Press, 5-8 December, 2022, pp. 89-89, ISBN 978-961-297-034-5 Mihailović A., Samardžić S., Lakatoš R., Adamović (Majkić) S., Ninkov J., Ralević N., Forkapić S.: Arsenic, cobalt, chromium, and nickel content in topsoil of industrial areas, 11. International Conference on Radiation, Natural Sciences, Medicine, Engineering, Technology and Ecology (RAD), Herceg Novi: RAD Centre, Niš, Serbia, 19-23 June, 2023, pp. 60-60, ISBN 978-86-901150-6-8 Adamović (Majkić) S., Tomić I., Banjanin B., Milošević R., Adamović D., Mihailović A., Dramićanin M.: The heavy metals in the processing screen printing inks, 29. International Symposium on Analytical and Environmental Problems, Szeged: University of Szeged, H-6720 Szeged, Dugonics tér 13, Hungary, 13-14 November, 2023, pp. 64-65, ISBN 978-963-306-963-9	27	13.50
M51	Rad u vodećem časopisu nacionalnog značaja Rad u vodećem časopisu nacionalnog značaja Kiurski J., Adamović D., Oros I., Krstić J., Adamović (Majkić) S., Vojinović-Miloradov M., Kovačević I.: Correlation between Ozone and Total VOCs in Printing Environment, Journal of Chemistry and Chemical Engineering, 2011, Vol. 5, No. 5, pp. 423-428, ISSN 1934-7375 Kiurski J., Adamović (Majkić) S., Oros I., Krstić J., Petrović (Đogo) M.: Detection and Quantification of Ozone in Screen Printing Facilities, Proceedings of World Academy of Science, Engineering and Technology, 2011, Vol. 7, No. 75, pp. 923-928, ISSN 1307-6884 Kiurski J., Adamović (Majkić) S., Krstić J., Oros I., Vojinović-Miloradov M.: Adsorption efficiency of low-cost materials in the removal of Zn(II) ions from printing developer, Acta Technica Corviniensis, 2011, Vol. 4, pp. 61-66, ISSN 2067-3809 Samardžić S., Mihailović A., Kiurski J., Adamović (Majkić) S., Adamović D.: Noise Level Investigation in Printng Industry in Novi Sad, Serbia, Proceedings of World Academy of Science, Engineering and Technology, 2011, Vol. 7, No. 76, pp. 256-258, ISSN 1307-6884 Kiurski J., Nedović Lj., Adamović (Majkić) S., Oros I., Krstić J., Čomić L.: Formaldehyde as Screen Printing Indoor Pollutant, International Journal of Structural and Civil Engineering, 2012, Vol. 1, No. 2, pp. 18-25, ISSN 2277-7032 Kiurski J., Nedović Lj., Adamović (Majkić) S., Oros I., Krstić J., Kovačević I., Čomić L.: Nonlinear Correlation Model in the Assessment of Screen Printing Indoor Pollution, American Journal of Environmental Engineering, 2012, Vol. 2, No. 2, pp. 35-38, ISSN 2166-465X Kiurski J., Oros I., Ralević N., Kovačević I., Adamović (Majkić) S., Krstić J., Nedović Lj.: Multivariate Statistical Interpretation of Fountain Solutions as Indicator of Environmental Pollution, Journal of Environmental Indicators, 2012, Vol. 7, pp. 11-19 Tomić I., Pinćjer I., Dedijer S., Adamović (Majkić) S.: Online learning during COVID-19 pandemic as perceived by the students of Graphic engineering and design, Journal of Graphic Engineering and Design, 2022, Vol. 13, No. 2, pp. 15-20, ISSN 2217-379X	8	16.00
M52	Rad u časopisu nacionalnog značaja Rad u časopisu nacionalnog značaja Milošević R., Kašiković N., Novaković D., Stančić M., Adamović (Majkić) S.: Investigation of the Printing Pressure Level Application Influence on Sheet-Fed Offset Print Quality, Machine Design, 2013, Vol. 5, No. 4, pp. 171-176, ISSN 1821-1259	1	1.50
M53	Rad u naučnom časopisu Rad u naučnom časopisu Kiurski J., Marić B., Đaković V., Adamović (Majkić) S., Oros I., Krstić J.: The Impact Factors of the Enviromental Pollution and Workers Health in Printing Industry, Proceedings of World Academy of Science, Engineering and Technology, 2012, No. 61, pp. 897-900, ISSN 1307-6884 Lasica M., Adamović (Majkić) S., Prica M.: Migracija metala iz štampanog plakata, Zbornik radova Fakulteta tehničkih nauka, 2013, Vol. 28, No. 18, pp. 3468-3471, ISSN 0350-428X Dramlić N., Prica M., Adamović (Majkić) S., Dedijer S.: FTIR studija uticaj rastvarača na flekso štamparske forme, Zbornik radova Fakulteta tehničkih nauka, 2013, Vol. 28, No. 18, pp. 3492-3495, ISSN 0350-428X Marković N., Adamović (Majkić) S., Prica M.: Praćenje migracije metala iz polimernih flekso štampanih ambalažnih materijala, Zbornik radova Fakulteta tehničkih nauka, 2014, Vol. 29, No. 3, pp. 574-577, ISSN 0350-428X Adamović (Majkić) S., Prica M., Radonić (Jakšić) J., Turk Sekulić M., Pap S.: Safety evaluation of the leaching of metals from the printed graphic product wastes, Journal of Graphic Engineering and Design, 2014, Vol. 5, No. 2, pp. 9-15, ISSN 2217-379X, UDK: 502.17466.061.34 Milovanović I., Adamović (Majkić) S., Prica M.: Uticaj rastvora različitih pH vrednosti na otisak grafičke boje za digitalnu štampu, Zbornik radova Fakulteta tehničkih nauka, 2015, Vol. 30, No. 8, pp. 1363-1366, ISSN 0350-428X Rusov M., Adamović (Majkić) S., Prica M.: Procena potencijala migracije metala iz štampanog omota bombona u rastvorima model sistema, Zbornik radova Fakulteta tehničkih nauka, 2016, Vol. 31, No. 11, pp. 2119-2122, ISSN 0350-428X Adamović D., Vojinović-Miloradov M., Miloradov M., Dorić J., Adamović (Majkić) S., Radonić (Jakšić) J., Turk Sekulić M.: Residual Toluene Concentrations in Exhaust Gas Waste Stream of Motor Vehicle, Applied Mechanics and Materials, 2016, Vol. 832, pp. 137-143, ISSN 1662-7482, UDK: doi: 10.4028/www.scientific.net/AMM.832.137 Petrović A., Adamović (Majkić) S., Prica M.: Adsorpcioni tretman otpadnog sredstva za vlaženje, Zbornik radova Fakulteta tehničkih nauka, 2017, Vol. 32, No. 6, pp. 1168-1171, ISSN 0350-428X Soro T., Adamović (Majkić) S., Prica M.: Solidifikaciono/stabilizacioni tertman otpadnih boja za tabačnu ofset štampu, Zbornik radova Fakulteta tehničkih nauka, 2017, Vol. 32, No. 2, pp. 300-303, ISSN 0350-428X Veljković N., Adamović (Majkić) S., Prica M.: Uticaj pH vrednosti rastvora na optičke osobine recikliranih papira, Zbornik radova Fakulteta tehničkih nauka, 2017, Vol. 32, No. 2, pp. 312-315, ISSN 0350-428X Bubnjević M., Adamović (Majkić) S., Prica M.: Ekološki uticaj mangana na grafičko okruženje, Zbornik radova Fakulteta tehničkih nauka, 2019, Vol. 34, No. 4, pp. 681-684, ISSN 0350-428X Karan J., Adamović (Majkić) S.: Uklanjanje organskog zagađenja iz otpadnog sredstva za vlaženje, Zbornik radova Fakulteta tehničkih nauka, 2019, Vol. 34, No. 12, pp. 2164-2167, ISSN 0350-428X Pavlić Lj., Adamović (Majkić) S.: Koncentracioni nivoi čestičnih materija i lakoisparljivih komponenata u digitalnoj štampariji, Zbornik radova Fakulteta tehničkih nauka, 2021, Vol. 36, No. 4, pp. 690-692, ISSN 0350-428X Đorđević G., Adamović (Majkić) S.: Ekološki aspekt 3D štampe na grafičko okruženje, Zbornik radova Fakulteta tehničkih nauka, 2021, Vol. 36, No. 6, pp. 1122-1125, ISSN 0350-428X Nikčević M., Adamović (Majkić) S.: Kinetika elektrokoagulacionog uklanjanja bakra iz efluenta ofset štampe, Zbornik radova Fakulteta tehničkih nauka, 2021, Vol. 36, No. 12, pp. 2093-2096, ISSN 0350-428X Savić K., Adamović (Majkić) S.: Efikasnost adsorpcionog uklanjanja organskih polutanata iz efluenta ofset štampe primenom nanomaterijala, Zbornik radova Fakulteta tehničkih nauka, 2022, Vol. 37, No. 1, pp. 153-157, ISSN 0350-428X Crnojački Ž., Adamović (Majkić) S.: Uticaj starenja na čestice perlescentnih pigmenata, Zbornik radova Fakulteta tehničkih nauka, 2022, Vol. 37, No. 9, pp. 1512-1515, ISSN 0350-428X Ćetković A., Adamović (Majkić) S.: Opasnosti i rizici tokom izrade proizvoda flekso tehnikom štampe, Zbornik radova Fakulteta tehničkih nauka, 2023, Vol. 38, No. 4, pp. 471-474, ISSN 0350-428X Mališević J., Adamović (Majkić) S.: Formulacija otpada generisanog tokom proizvodnje tetra-pak ambalaže, Zbornik radova Fakulteta tehničkih nauka, 2023, Vol. 38, No. 6, pp. 772-775, ISSN 0350-428X Salma A., Adamović (Majkić) S.: Emisije individualnih i ukupnih lakoisparljivih organskih jedinjenja iz ofset i tampon grafičkih boja, Zbornik radova Fakulteta tehničkih nauka, 2024, Vol. 39, No. 2, pp. 271-274, ISSN 0350-428X Milačić T., Adamović (Majkić) S.: Procena rizika tokom izrade štampanih kompostabilnih kesa, Zbornik radova Fakulteta tehničkih nauka, 2024, Vol. 39, No. 2, pp. 279-282, ISSN 0350-428X Đorđević M., Adamović (Majkić) S.: Analiza grafičkog otpada generisanog tokom proizvodnje papirnih pakovanja za pekare, Zbornik radova Fakulteta tehničkih nauka, 2024, Vol. 39, No. 2, pp. 283-286, ISSN 0350-428X	23	23.00
M63	Saopštenje sa skupa nacionalnog značaja štampano u celini Saopštenje sa skupa nacionalnog značaja štampano u celini Prica M., Kiurski J., Dalmacija B., Pešić V., Adamović (Majkić) S.: Organic and inorganic load of waste waters of some printing facilities in the territory of the city of Novi Sad, 16. International Symposium in the Field of Pulp, Paper, Packaging and Graphics, Zlatibor: University of Belgrade - Faculty of Technology and Metallurgy, 15-18 Jun, 2010, pp. 109-112, ISBN 978-86-7401-267-3 Adamović D., Turk Sekulić M., Radonić (Jakšić) J., Adamović (Majkić) S.: Ekspozicija benzenu u radnom okruzenju Rafinerije Novi Sad, 1. Nacionalna konferencija sa međunarodnim učešćem "Zaštita na radu u 21. veku - Teorija i praksa", Tara: Fakultet tehnickih nauka, Departman za inzenjerstvo zastite zivotne sredine i zastite na radu, 4-8 Oktobar, 2011, pp. 257-260, ISBN 978-86-87495-24-1 Kiurski J., Adamović (Majkić) S., Oros I., Adamović D., Krstić J.: Total VOCs emissions from screen printing, 50. 50. Jubilarno savetovanje Srpskog hemijskog društva, Beograd: Srpsko hemijsko društvo, 14-15 Jun, 2012, pp. 116-119, ISBN 978-86-7132-049-8 Adamović (Majkić) S., Prica M., Adamović D., Rajić Lj., Dalmacija B.: The Influence of Aluminum and Iron Electrodes on Deposition of Organic Substances from the Waste Developer By Electrocoagulation, 19. International Symposium in the Field of Pulp, Paper, Packaging and Graphics, Zlatibor: Tehnološko-metalurški fakultet Univerziteta u Beogradu Centar celulozno-papirne, ambalažne i grafičke industrije Srbije, 25-28 Jun, 2013, pp. 95-99, ISBN 978-86-7401-304-5 Prica M., Adamović (Majkić) S., Dalmacija B., Rajić Lj., Adamović D.: Analysis of Kinetics Decontamination of the Waste Offset Developer by Using Elecrocoagulation, 19. International Symposium in the Field of Pulp, Paper, Packaging and Graphics, Zlatibor: Tehnološko-metalurški fakultet Univerziteta u Beogradu Centar celulozno-papirne, ambalažne i grafičke industrije Srbije, 25-28 Jun, 2013, pp. 101-105, ISBN 978-86-7401-304-5 Prica M., Adamović (Majkić) S., Novaković D., Pavlović Ž., Kašiković N., Dedijer S., Adamović D.: Mogućnost smanjenja otpada u grafičkoj industriji, 10. Otpadne vode, komunalni čvrsti otpad i opasan otpad, Zlatibor, 1-3 April, 2014, pp. 117-121, ISBN 978-86-82931-61-4 Prica M., Adamović (Majkić) S., Turk Sekulić M., Radonić (Jakšić) J., Adamović D., Novaković D., Karlović I.: Praćenje migracije metala iz otpadnog štampanog grafičkog materijala, 10. Otpadne vode, komunalni čvrsti otpad i opasan otpad, Zlatibor, 1-3 April, 2014, pp. 122-126, ISBN 978-86-82931-61-4 Prica M., Adamović (Majkić) S., Radonić (Jakšić) J., Turk Sekulić M., Pavlović Ž., Adamović D., Kašiković N.: Procena uticaja cinka iz otpadnih polimernih flekso štampanih grafičkih materijala na životnu sredinu nakon njihove dispozicije, 8. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Faculty of Technical Sciences, Department of Production Engineering, Novi Sad, 19-20 Jun, 2014, pp. 175-178, ISBN 978-86-7892-616-7 Prica M., Tričković J., Velimirović M., Bečelić-Tomin M., Kerkez Đ., Adamović (Majkić) S.: Inženjerski nanomaterijali u životnoj sredini, 45. Otpadne vode, komunalni čvrsti otpad i opasan otpad, Budva, 21-23 April, 2015, pp. 224-228 Adamović (Majkić) S., Prica M.: Elektrokoagulaciono uklanjanje bakra iz otpadnog materijala grafičke industrije, 9. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Faculty of Technical Sciences, Department of Production Engineering, Novi Sad, 19-20 Jun, 2015, pp. 117-120, ISBN 978-86-7892-712-6 Adamović (Majkić) S., Prica M., Velimirović M., Pavlović Ž., Tričković J., Maletić S.: Solidifikaciono/stabilizacioni tretman otpadnih procesnih ofset boja, 10. International Scientific Conference ETIKUM, Novi Sad: Faculty of Technical Sciences, Department of Production Engineering, Novi Sad, 23-25 Jun, 2016, pp. 141-144, ISBN 978-86-7892-825-3 Adamović (Majkić) S., Prica M., Gvoić V., Novaković D., Petrović S., Bošnjaković G., Đurđević S.: Uklanjanje hroma iz otpadnog ofset razvijača primenom zeolita, 14. Zaštita na radu – Put uspešnog poslovanja, Divčibare: Savez zaštite na radu Srbije, 4-7 Oktobar, 2017, pp. 157-166, ISBN 978-86-919221-2-2 Adamović D., Vojinović-Miloradov M., Adamović (Majkić) S., Radonić (Jakšić) J., Turk Sekulić M., Obrovski B., Pap S.: Benzen u radnoj i životnoj sredini, 14. Zaštita na radu – Put uspešnog poslovanja, Divčibare: Savez zaštite na radu Srbije, 4-7 Oktobar, 2017, pp. 175-181, ISBN 978-86-919221-2-2 Adamović (Majkić) S., Prica M., Szilágyi A., Kašiković N., Milošević R., Banjanin B.: FIZIČKO-MEHANIČKA I OPTIČKA KARAKTERIZACIJA TETRA PAK AMBALAŽE, 11. ETIKUM, Novi Sad, 6-8 Decembar, 2017, pp. 189-192, ISBN 978-86-6022-00-68 Adamović (Majkić) S., Novaković D., Adamović D., Pinćjer I., Đurđević S., Mihailović A.: Gravimetrijska analiza suspendovanih čestica u ambijentanom vazduhu digitalne štamparije, 15. 15. Međunarodna konferencija "Kontiniurano usavršavanje osnov unapređenja zaštite na radu", Kladovo: Savez zaštite na radu Srbije - IT, 18-22 Septembar, 2018, pp. 25-32, ISBN 978-86-919221-3-9 Adamović (Majkić) S., Adamović D., Mihailović A., Pinćjer I., Banjanin B., Đurđević S.: Analiza koncentracionih nivoa PM10 suspendovanih čestica u štampariji, 12. International Scientific Conference ETIKUM, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, Department of Production Engineering, 6-8 Decembar, 2018, pp. 165-168, ISBN 978-86-6022-123-2 Banjanin B., Vladić G., Pál (Apro) M., Bošnjaković G., Adamović (Majkić) S.: Definisanje elemenata alata za utiskivanje izrađenih FDM tehnikom 3D štampe, 12. International Scientific Conference ETIKUM, Novi Sad: University of Novi Sad, Faculty of technical sciences, Department of production engineering, Chair of metrology, Quality fixtures, tools and ecological engineering aspects, 6-8 Decembar, 2018, pp. 5-8, ISBN 978-86-6022-123-2, UDK: 621:658.562(082); 502.175(082) Adamović (Majkić) S., Rajs V., Mihailović A., Lakatoš R., Adamović D.: Characterization of the organic load of the waste fountain solution, 25. International Symposium on Analytical and Environmental Problems (ISAEP), Segedin: University of Szeged, Department of Inorganic and Analytical Chemistry, H-6720 Szeged, Dóm tér 7, Hungary, 7-8 Oktobar, 2019, pp. 453-457, ISBN 978-963-306-702-4 Adamović (Majkić) S., Rajs V., Adamović D., Novaković D., Đurđević S., Pinćjer I.: Uklanjanje anjonskih površinski aktivnih materija iz otpadnog ofset razvijača primenom adsorpcije, 16. Zaštita na radu – prioritet u poslovanju, Ohrid: Univerzitet "Goce Delčev", Štip, 9-12 Oktobar, 2019, pp. 231-239, ISBN 978-608-244-658-5 Adamović D., Vojinović-Miloradov M., Adamović (Majkić) S., Turk Sekulić M., Radonić (Jakšić) J., Pap S.: Ekspozicija radnika na benzinskim stanicama hazardnim BTEX jedinjenjima, 16. Zaštita na radu – prioritet u poslovanju, Ohrid: Univerzitet „Goce Delčev“, Štip, 9-12 Oktobar, 2019, pp. 17-22, ISBN 978-608-244-658-5 Ljiljana S., Adamović D., Vojinović-Miloradov M., Adamović (Majkić) S.: Physical activity and exposure to BTEX compounds in urban areas, 10. International Conference on “Sports science and health”, Banja Luka: Panevropski univerzitet "APEIRON" Banja Luka, 24-25 Jun, 2020, pp. 31-37, ISBN 978-99976-34-63-4 Adamović D., Stojiljković E., Adamović (Majkić) S., Jovanović T., Zoraja B., Rosić S.: Zagađenje vazduha unutrašnjih prostora, 17. Međunarodna konferencija Zaštita na radu u industrijskoj revoluciji 4.0, Divčibare: Savez zaštite na radu Srbije - IT, 22-25 Septembar, 2021, pp. 64-71, ISBN 978-86-919221-5-3 Adamović (Majkić) S., Rajs V., Adamović D., Pinćjer I., Tomić I., Mihailović A., Dramićanin M.: Elektrokoagulaciono uklanjanje hazardnih anjonskih surfaktanata iz ofset efluenta, 13. International Scientific Conference ETIKUM, Novi Sad: Univerzitet u Novom Sadu, Fakultet tehničkih nauka, Departman za Proizvodno mašinstvo, 2-4 Decembar, 2021, pp. 241-244, ISBN 978-86-6022-387-8 Gvoka T., Vladić G., Kašiković N., Maričić K., Bošnjaković G., Adamović (Majkić) S.: THE UTILIZATION OF WASTE TEXTILE MATERIALS IN THE PACKAGING PRODUCTION, 6. VI International Scientific Conference "Contemporary Trends and Innovations in the Textile Industry", Beograd: Union of Engineers and Textile Technicians of Serbia, Belgrade, Serbia, 14-15 Septembar, 2023, pp. 186-193, ISBN 978-86-900426-6-1 Adamović (Majkić) S., Milošević R., Banjanin B., Tomić I., Adamović D., Mihailović A., Dramićanin M.: Gasovite zagađujuće materije u radnom okruženju tampon mašine, 14. International Scientific Conference ETIKUM, Novi Sad: University of Novi Sad, Faculty of technical sciences, Department of production engineering, 7-9 Decembar, 2023, pp. 185-188, ISBN 978-86-6022-617-6	25	12.50
M64	Saopštenje sa skupa nacionalnog značaja štampano u izvodu Saopštenje sa skupa nacionalnog značaja štampano u izvodu Adamović (Majkić) S., Prica M., Adamović D., Radonić (Jakšić) J.: Mogućnosti primene i efikasnost elektrokoagulacije u tretmanu otpadnog ofset razvijača, 6. 6. simpozijum Hemija i zaštita životne sredine EnviroChem 2013, sa međunarodnim učešćem, Vršac: Srpsko hemijsko društvo, 21-24 Maj, 2013, pp. 198-199, ISBN 978-86-7132-052-8 Adamović D., Dorić J., Adamović (Majkić) S., Radonić (Jakšić) J., Prica M.: Aromatična jedinjenja u izduvnim gasovima motornih vozila , 6. 6. simpozijum Hemija i zaštita životne sredine EnviroChem 2013, sa međunarodnim učešćem, Vršac: Srpsko hemijsko društvo, Beograd, Srbija, 21-24 Maj, 2013, pp. 158-159, ISBN 978-86-7132-052-8 Prica M., Adamović (Majkić) S., Turk Sekulić M., Radonić (Jakšić) J., Novaković D.: Procena uticaja otpadnih štampanih grafičkih materijala na životnu sredinu u AP Vojvodini, 7. InterRegioSci, Novi Sad: Autonomna Pokrajina Vojvodina, Vlada AP Vojvodine, Pokrajinski sekretarijat za nauku i tehnoločki razvoj, 8 Maj, 2014, pp. 135-135 Adamović (Majkić) S., Prica M., Adamović D., Radonić (Jakšić) J., Turk Sekulić M.: Migracija olova iz omota bombona, 7. Simpozijum Hemija i zaštita životne sredine sa međunarodnim učešćem - EnviroChem, Palić: Srpsko hemijsko društvo, 9-12 Jun, 2015, pp. 250-251, ISBN 978-86-7132-058-0 Adamović D., Vojinović-Miloradov M., Dorić J., Adamović (Majkić) S., Turk Sekulić M., Radonić (Jakšić) J.: Emisija toluena u uslovima gradske vožnje, 7. Simpozijum Hemija i zaštita životne sredine sa međunarodnim učešćem - EnviroChem, Palić: Srpsko hemijsko deuštvo, 9-12 Jun, 2015, pp. 69-70, ISBN 978-86-7132-058-0 Adamović D., Vojinović-Miloradov M., Močević V., Radonić (Jakšić) J., Turk Sekulić M., Adamović (Majkić) S., Pap S.: Cleaning the engine using H2E ECC technology, 8. Simpozijum „Hemija i zaštita životne sredine - EnviroChem“, Kruševac: Srpsko hemijsko društvo, 30-1 Maj, 2018, pp. 219-220, ISBN 978-86-7132-068-9	6	1.20
M71	Odbranjena doktorska disertacija Odbranjena doktorska disertacija Adamović (Majkić) S.: Elektrokoagulacioni i adsorpcioni tretmani efluenata u grafičkim procesima ofset štampe, Novi Sad, Univerzitet u Novom Sadu, Fakultet tehničkih nauka, 2016, str. 1-237	1	6.00
M72	Odbranjen magistarski rad Odbranjen magistarski rad Adamović (Majkić) S.: FTIR spektroskopsko ispitivanje N–H···O vodonične veze N-cikloalkilbenzamida sa etrima, Novi Sad, Univerzitet u Novom Sadu, Prirodno-matematički fakultet, Departman za hemiju, biohemiju i zaštitu životne sredine, 2010, str. 1-79	1	3.00