Univerzitet u Novom Sadu i Pokrajinski sekretarijat za visoko obrazovanje i naučnoistraživačku delatnost

Karton naučnog radnika

Prezime: Savković

Ime: Borislav

APVNT broj: 3005

Organizacija: Fakultet tehničkih nauka u Novom Sadu

Produkcija - zbirni rezultati
Oznaka Naziv kriterijuma produkcije Broj Poena
208 345.50
M14
Monografska studija/poglavlje u knjizi M12 ili rad u tematskom zborniku međunarodnog značaja
Monografska studija/poglavlje u knjizi M12 ili rad u tematskom zborniku međunarodnog značaja
Gostimirović M., Pucovski (Pucovsky) V., Kovač P., Sekulić M., Savković B.: An analytical study of energy partition in grinding, Pfaffikon, Key Engineering Materials, Trans Tech Publications Ltd, Switzerland, 2016, str. 80-85, ISBN 978-3-03835-625-7

Kovač P., Pucovski (Pucovsky) V., Gostimirović M., Savković B., Šoos Lj., Ješić D.: Cutting force during grinding determined by regression analysis and genetic algorithms, Pfaffikon, Key Engineering Materials, Trans Tech Publications Ltd, Switzerland, 2016, str. 13-18, ISBN 978-3-03835-625-7

Kovač P., Savković B., Rodić D., Gostimirović M., Sekulić M., Ješić D.: Application of Neuro-Fuzzy Systems for Modeling Surface Roughness Parameters for Steel Difficult-to-Cut-Steel,, Pfaffikon, Solid State Phenomena, Trans Tech Publications Ltd, Switzerland, 2017, str. 277-284, ISBN 978-3-0357-1199-8

3 12.00
M21
Rad u vrhunskom međunarodnom časopisu
Rad u vrhunskom međunarodnom časopisu
Kovač P., Gostimirović M., Rodić D., Savković B.: Using the temperature method for the prediction of tool life in sustainable production, Measurement, 2019, Vol. 133, pp. 320-327, ISSN 0263-2241

Štrbac B., Ačko B., Havrlišan S., Matin I., Savković B., Hadžistević M.: Investigation of the Effect of Temperature and Other Significant Factors on Systematic Error and Measurement Uncertainty in CMM Measurements by Applying Design of Experiments, Measurement, 2020, Vol. 158, ISSN 0263-2241

Jovičić G., Milošević A., Kanović Ž., Šokac M., Šimunović G., Savković B., Vukelić Đ.: Optimization of Dry Turning of Inconel 601 Alloy Based on Surface Roughness, Tool Wear, and Material Removal Rate, Article Number: 1068, Metals, 2023, Vol. 13, No. 6, ISSN 2075-4701

Rozing G., Duspara M., Dudić B., Savković B.: Research on the Effect of Load and Rotation Speed on Resistance to Combined Wear of Stainless Steels Using ANOVA Analysis, Materials, 2023, Vol. 16, No. 12, pp. 1-13, ISSN 1996-1944

4 32.00
M22
Rad u istaknutom međunarodnom časopisu
Rad u istaknutom međunarodnom časopisu
Kovač P., Šiđanin (Sidjanin) L., Rajnović D., Savković B., Wannasin J.: The microstructure influence on the chip formation process of Al-Cu alloy cast conventionally and in semi solid state, Metalurgija, 2012, Vol. 51, No. 1, pp. 34-38, ISSN 0543-5846, UDK: 669.715:621.96.621.773:620.18=111

Gostimirović M., Kovač P., Ješić D., Škorić B., Savković B.: Surface layer properties of the workpiece material in high performance grinding, Metalurgija, 2012, Vol. 51, No. 1, pp. 105-108, ISSN 0543-5846, UDK: 621.7:621.923:621.795:536.5=111

Kovač P., Rodić D., Pucovski (Pucovsky) V., Savković B., Gostimirović M.: Application of Fuzzy Logic and Regression Analysis for Modeling Surface Roughness in Face Milliing, Journal of Intelligent Manufacturing, 2013, Vol. 24, No. 4, pp. 755-762, ISSN 0956-5515, UDK: DOI 10.1007/s10845-012-0623-z

Kovač P., Rodić D., Pucovski (Pucovsky) V., Savković B., Gostimirović M.: Multi-output fuzzy inference system for modeling cutting temperature and tool life in face milling, Journal of Mechanical Science and Technology, 2014, Vol. 28, No. 10, pp. 4247-4256, ISSN 1738-494X, UDK: DOI 10.1007/s12206-014-0938-0

Kovač P., Petrović V., Pucovski (Pucovsky) V., Birčanin B., Savković B., Gostimirović M.: ENERGY EFFICIENCY CART MODELING OF SOLAR ENERGY COLLECTORS BY GENETIC PROGRAMMING, Thermal Science, 2016, Vol. 20, No. S2, pp. 471-479, ISSN 0354-9836

Savković B., Kovač P., Dudić B., Rodić D., Tarić M., Gregus M.: Application of an Adaptive “Neuro-Fuzzy” Inference System in Modeling Cutting Temperature during Hard Turning, Applied Sciences, 2019, Vol. 9, No. 18, pp. 1-13, ISSN 2076-3417

Savković B., Kovač P., Dudić B., Gregus M., Rodić D., Štrbac B., Dučić N.: Comparative Characteristics of Ductile Iron and Austempered Ductile Iron Modeled by Neural Network , Materials, 2019, Vol. 12, No. 18, pp. 1-16, ISSN 1996-1944

Savković B., Kovač P., Rodić D., Štrbac B., Klancnik S.: Comparison of artificial neural network, fuzzy logic and genetic algorithm for cutting temperature and surface roughness prediction during the face milling process, Advances in Production Engineering and Management, 2020, Vol. 15, No. 2, pp. 137-150, ISSN 1854-6250

Dučić N., Jovičić A., Manasijević S., Radiša R., Čojbašić Ž., Savković B.: Application of Machine Learning in the Control of Metal Melting Production Process, Applied Sciences, 2020, Vol. 10, No. 17, pp. 1-15, ISSN 2076-3417

Dudić B., Smolen j., Kovač P., Savković B., Dudić Z.: Electricity Usage Efficiency and Electricity Demand Modeling in the Case of Germany and the UK, Applied Sciences, 2020, Vol. 10, No. 7, pp. 1-12, ISSN 2076-3417

Rodić D., Gostimirović M., Sekulić M., Savković B., Štrbac B.: Investigation an assisting electrode powder mixed electrical discharge machining of nonconductive ceramic, International Journal of Advanced Manufacturing Technology, 2022, No. 118, pp. 2419-2435, ISSN 0268-3768

Savković B., Kovač P., Dudić B., Gregus M.: Decoding of Factorial Experimental Design Models Implemented in Production Process, Computers Materials and Continua / CMC, 2022, Vol. 71, No. 1, pp. 1-15, ISSN 1546-2218

Rodić D., Gostimirović M., Sekulić M., Savković B., Aleksić A.: Study and Optimization Defect Layer in Powder Mixed Electrical Discharge Machining of Titanium Alloy , Processes, 2023, Vol. 11, No. 4, pp. 1-14, ISSN 2227-9717

Duspara M., Savković B., Dudić B., Stoić A.: Effective Detection of the Machinability of Stainless Steel from the Aspect of the Roughness of the Machined Surface, Coatings, 2023, Vol. 13, No. 2, pp. 1-12, ISSN 2079-6412

Savković B., Rodić D., Sekulić M., Kovač P., Štrbac B., Klančnik S.: Implementation of a Virtual Instrument in the System for Measuring Forces and Temperatures in the Milling Process, Processes, 2024, Vol. 12, pp. 1-22, ISSN 2227-9717

Štrbac B., Ranisavljev M., Orošnjak M., Havrlišan S., Dudić B., Savković B.: Unsupervised machine learning application in the selection of measurement strategy on Coordinate Measuring Machine, Advances in Production Engineering and Management, 2024, Vol. 19, No. 2, pp. 209-222, ISSN 1854-6250

16 80.00
M23
Rad u međunarodnom časopisu
Rad u međunarodnom časopisu
Kovač P., Pucovski (Pucovsky) V., Gostimirović M., Savković B., Rodić D.: INFLUENCE OF DATA QUANTITY ON ACCURACY OF PREDICTIONS IN MODELING TOOL LIFE BY THE USE OF GENETIC ALGORITHMS, International Journal of Industrial Engineering: Theory, Applications and Practice, 2014, Vol. 21, No. 2, pp. 14-21, ISSN 1943-670X

Golubovic D., Kovač P., Savković B., Jesic D., Gostimirović M.: Testing the tribological characteristics of nodular cast iron austempered by a conventional and an isothermal procedure, Materiali in Tehnologije, 2014, Vol. 48, No. 2, pp. 293-298, ISSN 1580-2949, UDK: 669.131.6:531.43:620.178.1

Simic S., Golubović D., Savković B., Kovač P., Ješić D.: MONITORING OF WOOD BRIQUETTES COMBUSTION PARAMETERS DEPENDING ON SHARE WASTE MATERIALS OBTAINED FROM REFINING PROCESS OF BASE OILS AND PARAFFIN, Oxidation Communication, 2016, Vol. 39, No. 4, pp. 3291-3304, ISSN 0209-4541

Kovač P., Ješić D., Sovilj-Nikić S., Kandeva M., Kalitchin Z., Gostimirović M., Savković B.: ENERGY ASPECTS OF TRIBOLOGICAL BEHAVIOUR OF NODULAR CAST IRON, Journal of Environmental Protection and Ecology, 2018, Vol. 19, No. 1, pp. 163-172, ISSN 1311-5065

Baloš S., Rajnović D., Šiđanin (Sidjanin) L., Savković B., Kovač P., Janjatović P.: Tensile and fatigue properties, machinability and machined surface roughness of Al-Si-Cu alloys, Revista Materia, 2019, Vol. 24, No. 03, ISSN 1517-7076

Savković B., Kovač P., Stoić A., Dudić B.: Optimization of Machining Parameters Using the Taguchi and ANOVA Analysis in the Face Milling of Aluminum Alloys AL7075, Tehnički vjesnik - Technical Gazette, 2020, Vol. 27, No. 4, pp. 1221-1228, ISSN 1330-3651

Štrbac B., Rodić D., Delić M., Savković B., Hadžistević M.: Investigation of Functional Dependency between the Characteristics of the Machining Process and Flatness Error Measured on a CMM, Measurement Science Review, 2021, Vol. 21, No. 6, pp. 158-167, ISSN 1335-8871

Jesic D., Sovilj-Nikic S., Kovač P., Sovilj B., Kandeva M., Kalitchin Z., Savković B.: Eco-Tribological Properties of Nodular Cast Iron of Ferritic Structural Basis, Journal of Environmental Protection and Ecology, 2022, Vol. 23, No. 1, pp. 171-182, ISSN 1311-5065

Rodić D., Gostimirović M., Sekulić M., Savković B., Aleksić A.: Fuzzy Logic Approach to Predict Surface Roughness in Powder Mixed Electric Discharge Machining of Titanium Alloy, Strojniski vestnik - Journal of Mechanical Engineering, 2023, Vol. 69, No. 9-10, pp. 376-384, ISSN 0039-2480

9 27.00
M24
Rad u časopisu međunarodnog značaja verifikovanog posebnom odlukom
Rad u časopisu međunarodnog značaja verifikovanog posebnom odlukom
Kovač P., Rodić D., Savković B., Pucovski (Pucovsky) V., Gostimirović M.: Modelling Tool Wear in Avoiding the Risk of Breakage by Using Fuzzy Logic, Integritet i vek konstrukcija, 2015, Vol. 15, No. 2, pp. 103-109, ISSN 1451-3749, UDK: 621

1 3.00
M31
Predavanje po pozivu sa međunarodnog skupa štampano u celini
Predavanje po pozivu sa međunarodnog skupa štampano u celini
Kovač P., Gostimirović M., Sekulić M., Savković B.: Main developments in cutting technology-Keynote Paper, 10. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 9-10 October, 2009, pp. 13-21, ISBN 978-86-7892-223-7

Kovač P., Gostimirović M., Sekulić M., Savković B.: Modeling and simulation of cutting process-Invited Paper, 10. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 9-10 October, 2009, pp. 22-27, ISBN 978-86-7892-223-7

Kovač P., Pucovski (Pucovsky) V., Gostimirović M., Savković B., Šoos Lj., Ješić D.: Cutting force during grinding determined by regression analysis and genetic algorithms, 8. International Congress on Precision Machining - ICPM, Novi Sad: Faculty of Technical Sciences, University of Novi Sad, 1-3 October, 2015, pp. 13-18, ISBN 978-86-7892-742-3

Gostimirović M., Pucovski (Pucovsky) V., Kovač P., Sekulić M., Savković B.: An analytical study of energy partition in grinding - Invited paper, 8. International Congress on Precision Machining - ICPM, Novi Sad: Faculty of Technical Sciences, University of Novi Sad, 1-3 October, 2015, pp. 81-86, ISBN 978-86-7892-742-3

Kovač P., Savković B., Rodić D., Mankova I., Gostimirović M., Sekulić M.: Application of Artificial Intelligence in Modeling and Optimization of Machining processes, 17. International Conference "Research and Development in Mechanical Industry" – RaDMI, Zlatibor: SaTCIP (Scientific and Tehnical Center for Intellectual Poperty), 13-16 September, 2017, pp. 13-16, ISBN 978-86-6075-062-6

5 15.00
M33
Saopštenje sa međunarodnog skupa štampano u celini
Saopštenje sa međunarodnog skupa štampano u celini
Sekulić M., Kovač P., Gostimirović M., Jurković Z., Savković B.: The thrust force structure in drilling, 10. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, 9-10 October, 2009, pp. 72-75, ISBN 978-86-7892-223-7

Sekulić M., Gostimirović M., Kovač P., Savković B.: Employing a virtual instrumentation as a teching tool for a cutting force monitoring system in drilling, 13. International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" - TMT, Hammamet: University of Zenica, Faculty of Mechanical Engineering, 16-21 October, 2009, pp. 9-12, ISBN 1840-4944

Gostimirović M., Kovač P., Sekulić M., Savković B.: Inverse task solution of heat conduction in grinding process, 10. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 9-10 October, 2009, pp. 37-39, ISBN 978-86-7892-223-7

Kovač P., Savković B., Mijić A., Sekulić M.: Modeling of cutting forces in face milling, 10. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 9-10 October, 2009, pp. 40-43, ISBN 978-86-7892-223-7

Kovač P., Šiđanin (Sidjanin) L., Rajnović D., Savković B., Wannasin J.: The chip formation process of Al-Cu alloy cast conventionally and in semi solid state, 4. Internacional Conference on Engineering Technologies (ICET), Novi Sad: Faculty of Technical Sciences, 28-30 April, 2009, pp. 327-331, ISBN 978-86-7892-227-5, UDK: 62:001.8(082)

Kovač P., Serdar B., Savković B., Gostimirović M.: Computer analysis of cutting force action on cutting tool during turning, 10. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Fakultet tehnickih nauka, 9-10 October, 2009, pp. 44-47, ISBN 978-86-7892-223-7

Sekulić M., Kovač P., Gostimirović M., Hadžistević M., Savković B.: Prediction of cutting forces in face milling of hardened steel, 1. International Conference on Sustainable Life in Manufacturing - SLIM, Egirdir: Suleyman Demirel University, CAD/CAM Research and Application Center; University of Ljubljana, Faculty of Mechanical Engineering, 24-25 June, 2010, pp. 36-39

Kovač P., Gostimirović M., Savković B., Sekulić M.: Finite element method analysis of temperature distribution in turning, 13. International Scientific Conference "Mechanical Engineering", Bratislava: Slovak University of Technology in Bratislava, 21 October, 2010, pp. 61-67, ISBN 978-80-227-3304-5

Kovač P., Savković B., Serdar B., Gostimirović M., Sekulić M.: Computer Analysis of Heat Flux in the Cutting Zone, 5. PSU-UNS International Conference: Energy and the Environment, Phuket: Prince of Songkla University, Faculty of Engineering, Hat Yai, Songkhla, Thailand 90112, 2-3 May, 2011, pp. 661-664, UDK: http://www.icet.eng.psu.ac.th Paper id: 243 , Password: 3b4f73

Pucovski (Pucovsky) V., Kovač P., Savković B.: Cutting Temperature During Face Milling Predicted by the use of Genetic Algorithm, 12. International Conference "Technology", Bratislava: Slovak University of Technology in Bratislava, 13 September, 2011, pp. 333-337, ISBN 978-80-227-3545-2

Sekulić M., Gostimirović M., Kovač P., Savković B., Jurković Z.: Optimization of Cutting Parameters Based on Tool Chip Interface temperature in Turning Process using Taguchi`s Method, 15. International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" - TMT, Prague: Faculty of Mechanical Engineering in Zenica, Fakultetska 1, Zenica, B&H, 12-18 September, 2011, pp. 69-72, ISBN ISSN 1840-4944

Gostimirović M., Kovač P., Sekulić M., Savković B.: THE RESEARCH OF DISCHARGE ENERGY IN EDM PROCESS, 34. International Conference on Production Engineering, Niš: Faculty of Mechanical Engineering, University of Niš, 28-30 September, 2011, pp. 417-420, ISBN 978 – 86 – 6055 – 01

Sekulić M., Rodić D., Kovač P., Gostimirović M., Savković B.: ANFIS predicting of the cutting forces in face milling hardened steel, 2. International Conference on Sustainable Life in Manufacturing - SLIM, Fiesa: TAVO, Slovene Society for Abrasive Water Jet Technology, University of Ljubljana, Slovenia, 25-27 September, 2011, pp. 346-349, ISBN 978-961-6536-57-8

Gostimirović M., Kovač P., Sekulić M., Savković B.: INFLUENCE OF DISCHARGE PARAMETERS ON THE PERFORMANCE OF ELECTRICAL DISCHARGE MACHINING, 8. International Scientific Conference on Production Engineering - RIM, Velika Kladuša: University of Bihać, Technical Faculty, 29-1 September, 2011, pp. 175-178

Gostimirović M., Pucovski (Pucovsky) V., Kovač P., Šooš Lj., Rodić D., Savković B.: Modeling of Discharge Energy in EDM Process by the use of genetic Algorithms, 11. International Scientific Conference "Advanced Production Technologies" - MMA, Novi Sad: Fakultet tehničkih nauka-Novi Sad, 20-21 September, 2012, pp. 13-16, ISBN 978-86-7892-419

Kovač P., Gadus J., Palkova Z., Savković B., Gostimirović M.: Biogas Powered Fuel Cells, 1. Scientific and Specialist Conference "Renewable and Available Sources of Energy", Andrevlje: Fakultet tehničkih nauka, 9-11 October, 2012, pp. 206-211, ISBN 978-86-7892-441-5

Gostimirović M., Rodić D., Kovač P., Pucovski (Pucovsky) V., Savković B.: Application of Neuro-Fuzzy Systems and Genetic Programming for Modelling Surface Roughnessin Electrical Discharge Machining, 11. International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology - DEMI, Banja Luka: University of Banja Luka, Faculty of Mechanical Engineering, 30-1 May, 2013, pp. 307-312, ISBN 978-99938-39-46-0

Kovač P., Pucovski (Pucovsky) V., Palkova Z., Nagy L., Savković B.: Solar Energy Dependance Modeled With Evolutionary Algorithms, 19. International Conference "Engineering for Environment Protection" – TOP, Časta-Papiernička: Faculty of Mechanical Engineering STU in Bratislava, 11-13 June, 2013, pp. 145-150, ISBN 978-80-227-3955-9

Kovač P., Sekulić M., Gostimirović M., Savković B., Kopač J.: Concept of sustainable production, 1. Scientific and Specialist Conference "Ecology in service of sustainable development", Novi Sad: MTMA–MEĐUNARODNA TEHNOLOŠKO MENADŽERSKA AKADEMIJA, Trg Dositeja Obradovića 7, Novi Sad, 26-28 September, 2013, pp. 1-8, ISBN 978–86–7892–441–5

Gostimirović M., Kovač P., Mankova I., Sekulić M., Savković B.: MODULAR DESIGN OF MACHINE TOOLS FOR WATER JET MACHINING, 8. International Symposium - KOD - Machine and Industrial Design in Mechanical Engineering, Balatonfured: Faculty of technical Sciences-Novi Sad, Faculty of Mechanical Engineering, STU Bratislava, 12-15 June, 2014, pp. 425-428, ISBN ISBN 978-86-7892-615

Savković B., Kovač P., Rodić D., Gostimirović M., Pucovski (Pucovsky) V., Holešovský F.: Application of anfis for modeling and prediction of the surface roughness for steel dificult to machining, 8. International Scientific Conference on Mechanical Engineering - COMEC, Cayo Santa Maria: Faculty of Mechanical Engineering, Universidad Central “Marta Abreu” de Las Villas, CUBA, 17-20 November, 2014, pp. 1-11, ISBN 978-959-250-997-9

Pucovski (Pucovsky) V., Rodić D., Kovač P., Savković B., Gostimirović M., Rzadkiewicz S., Rokosz K.: Artificial intelligence in machining processes, 11. Konferencja Studentów i Młodych Pracowników Nauki Wydziału Mechanicznego, Koszalin: Politechnika Koszalińska, 19-25 May, 2014, pp. 217-224, ISBN 978-83-7365-359-7

Gostimirović M., Kovač P., Ildiko M., Savković B., Sekulić M.: Experimental Research on the Surface Roughness of Creep-Feed Grinding Process, 7. PSU-UNS International Conference on Engineering and Technology - ICET, Phuket: Prince of Songkla University, Faculty of Engineering Hat Yai, Songkhla, 19-20 June, 2015, pp. 104-107

Kovač P., Petrović V., Pucovski (Pucovsky) V., Birčanin B., Savković B., Gostimirović M., Rokosz K.: Modelling of Energy Efficiency Cart of Solar Energy Collectors, 7. PSU-UNS International Conference on Engineering and Technology - ICET, Phuket: Prince of Songkla University, Faculty of Engineering Hat Yai, Songkhla, 19-20 June, 2015, pp. 151-154

Kovač P., Rodić D., Pucovski (Pucovsky) V., Savković B., Gostimirović M., Sekulić M., Mankova I.: Application of Intelligent Techniques and Regression Analysis for Modelling Cutting Temperature in Face Milling, 23. ABCM International Congress of Mechanical Engineering - COBEM, Rio de Janeiro: Brazilian Society of Mechanical Sciences and Engineering - ABCM, 6-11 December, 2015, pp. 1-4

Kovač P., Savković B., Gostimirović M., Rodić D., Holešovský F., Sekulić M.: Small Scale agro Slurry Biogas Plants for medium - sized farms , 9. International Scientific Conference XXI Century Environment - MASXXI, Cayo Santa Maria: Faculty of Mechanical Engineering, UCLV, 24-27 November, 2015, pp. 1-10, ISBN 978-959-312-031-9

Kovač P., Rodić D., Gostimirović M., Savković B., Ješić D.: Application of adaptive neuro fuzzy systems for modeling grinding process, 6. International Conference on Information Science and Technology (ICIST), Kopaonik: Society for Information Systems and Computer Networks, 29-2 February, 2016, pp. 247-250, ISBN 978-86-85525-18-6

Ješić D., Kovač P., Savković B., Gostimirović M., Sovilj-Nikić I.: Use of Sun-and-Planet Mechanism in Educative System, 9. The 9th International Symposium - KOD 2016 - Machine and Industrial Design in Mechanical Engineering, Balatonfured: Faculty of Technical Sciences, Novi Sad, 9-12 June, 2016, pp. 59-62, ISBN 978-86-7892-821-5

Savković B., Kovač P., Liska K., Mankova I., Sekulić M.: Modelling of surface roughness using the DoE plans of the first order and artificial neural networks in face milling, 9. International Scientific Conference on Mechanical Engineering - COMEC, Las Villas: Faculty of Mechanical Engineering, Universidad Central “Marta Abreu” de Las Villas, CUBA, 14-17 November, 2016, pp. 1-14, ISBN 978-959-312-216-0

Sekulić M., Pejic V., Kovač P., Gostimirović M., Savković B.: Optimization of cutting parameters based on material removal rate in ball-end milling process, 9. International Scientific Conference on Mechanical Engineering - COMEC, Las Villas: Faculty of Mechanical Engineering, Universidad Central “Marta Abreu” de Las Villas, CUBA, 14-17 November, 2016, pp. 1-13, ISBN 978-959-312-216-0

Kovač P., Kirin S., Savković B., Ješić D., Golubović D.: Optimal operating conditions for manure biogas plants in Serbia, 9. International Symposium on Exploitation of Renewable Energy Sources and Efficiency - EXPRES, Subotica: Inženjersko-tehničko udruženje vojvođanskih Mađara, 30-1 March, 2017, pp. 69-74, ISBN 978-86-919769-1-0

Kovač P., Ješić D., Savković B., Gostimirović M., Gvozdenović N.: Research of tribological characteristics of various oil applied in the tribological system, 15. International Conference on Tribology - SERBIATRIB, Kragujevac: University of Kragujevac, Faculty of Engineering and Serbian Tribology Society, 17-19 May, 2017, pp. 481-486, ISBN 978-86-6335-041-0

Kovač P., Kulundžić N., Mitrović A., Savković B., Gostimirović M.: FEM milling tools temperature measurement, modelling and simulation, 8. PSU-UNS International Conference on Engineering and Technology - ICET, Novi Sad: Faculty of Technical Sciences, Novi Sad, 8-10 June, 2017, pp. 1-4, ISBN 978-86-7892-934-2

Pucovski (Pucovsky) V., Sekulić M., Gostimirović M., Kovač P., Savković B., Jovanović D.: CUTTING FORCES DURING ULTRASONIC ASSISTED TURNING OF HARD TO MACHINE MATERIAL SPM10, 8. International Scientific Conference Research and development of mechanical elements and systems - IRMES, Trebinje: University of Montenegro, Faculty of Mechanical Engineering, 7-9 September, 2017, pp. 291-296, ISBN 978-9940-527-53-2

Golubović D., Kovač P., Ješić D., Savković B., Sarjanović D.: Ecomic analyze and energetic efficiency of small hydroplant, 10. International Symposium on Exploitation of Renewable Energy Sources and Efficiency - EXPRES, Subotica: Inženjersko-tehničko udruženje vojvođanskih Mađara, 5-7 April, 2018, pp. 34-38, ISBN 978-86-919769-3-4

Mitrović A., Kovač P., Kulundžić N., Savković B., Mankova I.: 3D end milling finite element thermal analysis, MATEC Web of Conferences, 2018, Vol. 17, No. 1, pp. 1-4, ISSN 2261-236X, 17. IMT Oradea, Oradea: Fascicle of Management and Technological Engineering, 31-1 May, 2018, pp. 1-4, ISBN 978-606-10-1537-5

Kovač P., Tarić M., Rodić D., Nedić B., Savković B., Ješić D.: RSM and Neural Network Modeling of Surface Roughness During Turning Hard Steel, 18. International Symposium for Production Research - ISPR, Beč: Springer Nature Switzerland, 28-31 August, 2018, pp. 16-25, ISBN 978-3-319-92266-9

Rodić D., Gostimirović M., Kovač P., Sekulić M., Savković B.: Principle of electrical discharge machining of non-conductive zirconia ceramics, 13. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, Department of Production Engineering, 28-29 September, 2018, pp. 33-36, ISBN 978-86-6022-094-5, UDK: 621.7/.9

Kovač P., Kirin S., Mirjanić D., Ješić D., Savković B., Sarjanović D.: Operating Economics of Biogas Plant with Cattle Farming, 8. International Conference "Economics and Management - Based on New Technologies" (EMoNT), Vrnjačka Banja: SaTCIP (Scientific and Technical Center for Intellectual Property) Ltd., 25-28 June, 2018, pp. 262-267, ISBN 978-86-6075-064-0

Janjatović P., Savković B., Kovač P., Baloš S., Dramićanin M., Zabunov I.: THE INFLUENCE OF WELDING SPEED AND CURRENT IN WELD SHAPE IN FORCE ARC PROCESS, 4. The IIW South-East European Welding Congress, Beograd, 10-13 October, 2018, pp. 1-5, ISBN 978-86-82585-13-8

Aleksić A., Sekulić M., Savković B., Gostimirović M., Kamenko I., Kovač P.: Optimization of cutting parameters by nature-inspired algorithms, 14. Međunarodni naučno-stručni skup o dostignućima elektrotehnike, mašinstva i informatike - DEMI, Banja Luka: University of Banja Luka, 24-25 May, 2019, pp. 51-56, ISBN 978-99938-39-85-9

Kovač P., Savković B., Rodić D., Aleksić A., Gostimirović M., Sekulić M., Kulundžić N.: Modelling and Optimization of Surface Roughness Parameters of Stainless Steel by Artificial Intelligence Methods, 19. International Symposium for Production Research - ISPR, Beč: Springer Nature Switzerland, 28-30 August, 2019, pp. 3-12, ISBN 978-3-030-31342-5

Savković B., Kovač P., Štrbac B., Pokusova M., Kulundžić N.: Modelling of the High-Chromium Cast Iron Surface Roughness, 20. International Symposium for Production Research - ISPR, Antalya: Springer Nature Switzerland, 24-27 September, 2020, pp. 523-534, ISBN 978-3-030-62783-6

Rodić D., Gostimirović M., Sekulić M., Savković B., Kulundžić N., Aleksić A.: Experimental research of surface roughness in powder mixed electric discharge machining, 15. International Conference on Accomplishments in Mechanical and Industrial Engineering - DEMI, Banja Luka: University of Banja Luka, Faculty of Mechanical Engineering, 28-29 May, 2021, pp. 65-70, ISBN 978-99938-39-92-7

Rodić D., Gostimirović M., Sekulić M., Savković B., Kulundžić N., Aleksić A.: Experimental research of material removal rate in powder mixed electric discharge machining, 38. International Conference of Production Engineering - ICPE-S, Čačak: University of Kragujevac, Faculty of Technical Sciences Čačak , 14-15 October, 2021, pp. 163-166, ISBN 978-86-7776-252-0

Sekulić M., Rodić D., Gostimirović M., Savković B., Aleksić A., Kulundžić N.: Modeling of torque and thrust force in drilling using genetic algorithm, 14. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: University of Novi Sad, Faculty of technical sciences, 23-25 September, 2021, pp. 49-52, ISBN 978-86-6022-364-9

Aleksić A., Sekulić M., Gostimirović M., Rodić D., Savković B., Antić A.: Effect of cutting parameters on cutting forces in turning of CPM 10v steel, 14. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: University of Novi Sad, Faculty of technical sciences, 23-25 September, 2021, pp. 59-62, ISBN 978-86-6022-364-9

Aleksić A., Rodić D., Sekulić M., Gostimirović M., Savković B.: Effect of cutting parameters on surface roughness in turning of CPM 10V steel, Infoteh, Jahorina, 2022, pp. 1-4, ISSN konferencija, 21. International Symposium INFOTEH-JAHORINA (INFOTEH), Jahorina: IEEE, 16-18 March, 2022, pp. 1-4, ISBN 978-1-6654-3778-3

Rodić D., Gostimirović M., Sekulić M., Savković B., Aleksić A., Kovač P.: Surface integrity in electrical discharge machining of non-conductive ceramic , 10. International Scientific Conference "Development in Machining Technology" - DiM, Cracow: Cracow University of Technology, 18-19 May, 2022, pp. 81-90, ISBN 978-80-553-4133-0

Aleksić A., Sekulić M., Savković B., Košarac A., Moljević S., Anić J.: Experimental investigation of machining parameters in turning of aluminium alloy 7075-T6, 16. International Conference on Accomplishments in Mechanical and Industrial Engineering - DEMI, Banja Luka, 1-2 June, 2023, pp. 54-59, ISBN 978-99976-11-03-1

Babić I., Šikuljak L., Košarac A., Moljević S., Sekulić M., Savković B., Aleksić A.: PREDICTING SURFACE ROUGHNESS IN THE MILLING OF BIOCOMPATIBLE ALLOY TI-6AL-4V, 13. International Conference Industrial Engineering and Environmental Protection - IIZS, Zrenjanin: University of Novi Sad, Technical Faculty “Mihajlo Pupin”, Zrenjanin, 5-6 October, 2023, pp. 94-104, ISBN 978-86-7672-368-3

Sekulić M., Savković B., Košarac A., Rodić D., Aleksić A., Moljević S., Anić J.: SUSTAINABLE PROCESSES AND THEIR APPLICATION IN MODERN ADVANCED CUTTING TECHNOLOGIES, 1. INTERNATIONAL SCIENTIFIC CONFERENCE: „CHALLENGES OF MODERN ECONOMY AND SOCIETY THROUGH THE PRISM OF GREEN ECONOMY AND SUSTAINABLE DEVELOPMENT“ – CESGED, Novi Sad: UNIVERSITY OF ECONOMIC ACADEMY IN NOVI SAD - FACULTY OF ECONOMICS AND ENGINEERING MANAGEMENT - FIMEK AND FACULTY OF LAW FOR ECONOMY AND JUSTICE IN NOVI SAD, SERBIA;, 27-30 April, 2023, pp. 98-116, ISBN 978-86-81506-23-3

Sekulić M., Savković B., Aleksić A., Košarac A., Moljević S., Anić J.: INDUSTRY 4.0 AND MULTI-TASKING MACHINING, 8. International Scientific Conference "Industry 4.0", Borovets: SCIENTIFIC-TECHNICAL UNION OF MECHANICAL ENGINEERING “INDUSTRY 4.0”, 6-9 December, 2023, pp. 186-189, ISBN ISSN 2535-0153

Rodić D., Gostimirović M., Sekulić M., Savković B., Aleksić A., Kovač P.: Tool wear rate optimization in PMEDM using graphite powder by Taguchi method for titanium alloy, 11. International Scientific Conference "Development in Machining Technology" - DiM, Cracow: Cracow University of Technology, 27-28 April, 2023, pp. 1-8, ISBN 978-80-553-4133-0

Rodić D., Gostimirović M., Sekulić M., Savković B., Aleksić A.: Optimization surface roughness in powder mixed electrical discharge machining of titanium alloy, 16. International Conference on Accomplishments in Mechanical and Industrial Engineering - DEMI, Banja Luka: Faculty of Mechanical Engineering Banja Luka, 1-2 June, 2023, pp. 121-125, ISBN 978-99976-11-03-1

Rodić D., Gostimirović M., Sekulić M., Savković B., Aleksić A., Kukolj D.: Tool wear rate during electrical discharge machining of zirconium oxide, 6. International Conference Mechanical Engineering in XXI Century - MASING, Niš: Faculty of Mechanical Engineering, University of Niš, 14-15 December, 2023, pp. 1-4

Rodić D., Gostimirović M., Sekulić M., Savković B., Aleksić A., Kovač P.: Effect of dielectric fluid with graphite powder on the electrical discharge machining of non-conductive ceramic, 12. International Scientific Conference "Development in Machining Technology" - DiM, Cracow: Cracow University of Technology,, 25-26 April, 2024, pp. 1-10, ISBN 978-80-553-4421-8

Slavić D., Romero D., Pezzotta G., Marjanović U., Savković B., Alexandru Popan I., Rakić S.: Towards Human-Centric Digital Services: A Development Framework , 29. Advances in Production Management Systems (APMS), Hemnic: Springer, 8-12 September, 2024

Marinković D., Živković A., Mlađenović C., Knežev M., Mejić L., Savković B.: Analysis of the influence of the cutting regimes on the quality of the machining surface in turning process, 15. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of technical sciences, Department of production engineering, 24-26 September, 2024, pp. 35-38, ISBN 978-86-6022-681-7

Aleksić A., Rodić D., Gostimirović M., Sekulić M., Savković B., Kosanović A.: PRELIMINARY INVESTIGATION OF THE IMPACT OF MQL ON SURFACE ROUGHNESS DURING THE TURNING ALUMINUM ALLOY 6082, 15. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 24-26 September, 2024, pp. 21-24, ISBN 978-86-6022-681-7

Savković B., Rodić D., Sekulić M., Kovač P., Aleksić A., Kosanović A.: DEVELOPMENT OF A MEASUREMENT-ACQUISITION SYSTEM FOR MEASURING CUTTING FORCES AND TEMPERATURES USING VIRTUAL INSTRUMENTATION , 15. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 24-26 September, 2024, pp. 25-30, ISBN 978-86-6022-681-7

Rodić D., Gostimirović M., Sekulić M., Savković B., Aleksić A., Kosanović A.: CIRCULARITY ANALYSIS OF LASER-DRILLED HOLES USING THE TAGUCHI METHOD , 15. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 24-26 September, 2024, pp. 1-4, ISBN 978-86-6022-681-7

62 62.00
M34
Saopštenje sa međunarodnog skupa štampano u izvodu
Saopštenje sa međunarodnog skupa štampano u izvodu
Kovač P., Serdar B., Savković B.: COMPUTER ANALYSIS OF THE TEMPERATURE PHENOMENA DURING TURNING, 11. International Symposium of Interdisciplinary Regional Research (ISIRR), Szeged, 13-15 October, 2010, pp. 155-155

Kovač P., Šiđanin (Sidjanin) L., Rajnović D., Savković B., Wannasin J.: The microstructure influence on the chip formation process of Al-Cu alloy cast conventionally and in semi solid state, 10. International Symposium of Croatian Metallurgical Society - SHMD, Šibenik: Croatian Metallurgical Society, 17-21 June, 2012, pp. 383-383, ISBN 1334-2567

Gostimirović M., Kovač P., Škorić B., Savković B., Jesic D.: Surface layer properties of the workpiece material in high performance grinding, 10. International Symposium of Croatian Metallurgical Society - SHMD, Šibenik: Croatian Metallurgical Society, 17-21 June, 2012, pp. 426-426, ISBN 1334-2567

Kovač P., Savković B., Šiđanin (Sidjanin) L., Lukac O., Mankova I.: The Influence of Material Microstructure on the Chip Forming Process, 6. International Scientific Conference "Contemporary Materials", Banja Luka: Academy of Sciences and Arts of the Republic of Srpska, 4-6 June, 2013, pp. 88-88

Kovač P., Šiđanin (Sidjanin) L., Savković B., Gostimirović M., Sekulić M.: The Use of Microscopy in Investigation of Material Microstructure after Machining Process, 1. International Multidisciplinary Microscopy Congress – INTERM, Antalya: Poster, 10-13 October, 2013, UDK: http://www.interem.org/

Kirin S., Kovač P., Savković B., Mirjanić S., Šoos Lj.: Production of Biomass Energy from Landfills, 22. International Scientific Conference –Engineering for Environment Protection-TOP 2016, Bratislava: Faculty of Mechanical Engineering, STU Bratislava, 7-9 June, 2016, pp. 41-41, ISBN 978-80-227-4568-0

Sarjanović D., Kovač P., Savković B., Ješić D., Šooš Lj.: Performance of using waste hot water as an innovative energy sources, 23. International Scientific Conference "Engineering for Environment Protection" – TOP, Šamorin-Čilistov: Faculty of Mechanical Engineering STU in Bratislava, 20-22 September, 2017, pp. 69-69, ISBN 978-80-227-4731-8

Golubović D., Kovač P., Ješić D., Šooš L., Savković B., Sarjanović D.: Energetic efficiency improvement of smal hydropower plants, 24. International Scientific Conference-Engineering for Environment Protection-TOP 2018, Štrbske Pleso: Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, 19-21 September, 2018, pp. 41-41, ISBN 978-80-227-4835-3

Savković B., Bandić N., Kovač P., Ješić D., Kulundžić N.: Types of production lines for wooden mass pallets, 8. International Scientific Conference on Environmental and Material Flow Management - EMFM, Zenica: Faculty of Mechanical Engineering in Zenica, 14-16 November, 2018, pp. 11-11, ISBN 978-9958-617-46-1

Rodić D., Gostimirović M., Sekulić M., Savković B., Aleksić A.: Fuzzy logic approach to predict surface roughness in powder mixed electrical discharge machining of titanium alloy, 17. International Conference on Management and Innovative Technologies - MIT, Piran: University of Ljubljana, Faculty of Mechanical Engineering, 4-6 September, 2022

10 5.00
M45
Poglavlje u knjizi M42 ili rad u tematskom zborniku nacionalnog značaja
Poglavlje u knjizi M42 ili rad u tematskom zborniku nacionalnog značaja
Savković B., Kovač P., Gostimirović M., Rodić D., Pucovski (Pucovsky) V.: Development In Machining Technology, Scientific Research Reports, Edited by : Wojciech Zebela and Ildiko Mankova, Application of Neural Networks for Modeling and Prediction of The Machining Surface Roughness for Steel Dificult to Machining, Cracow, Cracow University of Technology, 2014, str. 259-270, ISBN 978-83-7242-765-6

Kovač P., Savković B., Kulundžić N., Gostimirović M., Holešovsky F., Sekulić M.: Development In Machining Technology, Scientific Research Reports, Edited by : Wojciech Zebela and Ildiko Mankova, Simulation of Temperature Distribution on the 3D Moving Cutting Tool, Cracow, Cracow University of Technology, 2015, str. 20-26, ISBN 978-83-7242-844-8

Kovač P., Kulundžić N., Savković B., Kundrak J., Gostimirović M., Sekulić M.: Development In Machining Technology, Scientific Research Reports, Edited by : Wojciech Zebela and Ildiko Mankova, Determination of Temperature Distribution and Cutting Force in Drilling, Cracow, Cracow University of Technology, 2016, str. 7-18, ISBN 978-80-553-2576-7

Kovač P., Savković B., Pokusova M., Kulundžić N., Vrabel M.: Development In Machining Technology, Scientific Research Reports, Edited by : Wojciech Zebela and Ildiko Mankova, Machinability Study of Surface Grinding of Hard High Alloyed Cast Iron, Cracow, Cracow University of Technology, 2018, str. 105-122, ISBN 978-80-553-2718-1

4 6.00
M51
Rad u vodećem časopisu nacionalnog značaja
Rad u vodećem časopisu nacionalnog značaja
Kovač P., Ješić D., Savković B., Gostimirović M.: Determination of the Most Favourable Friction Moment for Screw Tightening, Machine Design, 2015, Vol. 7, No. 2, pp. 35-40, ISSN 1821-1259

Kovač P., Ješić D., Kirin S., Savković B.: Zagađenje voda uzrokovano uljima која роtiču od sredstava za čišćenje i odmašćivanje, Savremena poljoprivredna tehnika, 2015, Vol. 41, No. 1, pp. 17-24, ISSN 0350-2953

Kovač P., Savković B., Ješić D., Mankova I.: Ispitivanje visokootpornih prevlaka na mašinskim delovima na abrazivno habanje, Savremena poljoprivredna tehnika, 2015, Vol. 41, No. 2, pp. 95-102, ISSN 0350-2953, UDK: 621.78

Aleksić A., Sekulić M., Gostimirović M., Rodić D., Savković B., Antić A.: Effect of cutting parameters on cutting forces in turning of CPM 10V steel, Journal of Production Engineering, 2021, Vol. 24, No. 2, pp. 5-8, ISSN 1821-4932

4 8.00
M52
Rad u časopisu nacionalnog značaja
Rad u časopisu nacionalnog značaja
Kovač P., Gostimirović M., Mankova I., Soos L., Savković B.: Overview of Experimental Investigation of Cutting Process Dynamic, Journal of Production Engineering, 2013, Vol. 16, No. 2, pp. 1-4, ISSN 1821-4932, UDK: 621

Savković B., Kovač P., Gerić K., Sekulić M., Rokosz K.: Application of Neural Network for Determination of Cutting Force Changes Versus Instantaneous Angle in Face Milling, Journal of Production Engineering, 2013, Vol. 16, No. 2, pp. 25-28, ISSN 1821-4932, UDK: 621

Jesic D., Pulic J., Kovač P., Savković B., Kulundžić N.: APPLICATION OF NODULAR CASTINGS IN THE MODERN INDUSTRY OF TRIBO- MECHANICAL SYSTEMS TODAY AND TOMORROW, Journal of Production Engineering, 2014, Vol. 17, No. 1, pp. 55-58, ISSN 1821-4932

Kovač P., Gostimirović M., Savković B., Mankova I., Pucovski (Pucovsky) V., Rodić D.: LCA ACTIVITIES - A REVIEW, Journal of Production Engineering, 2014, Vol. 17, No. 2, pp. 1-6, ISSN 1821-4932, UDK: 621

Kovač P., Gostimirović M., Ješić D., Savković B., Kulundžić N.: THE ROLE OF MATERIAL QUALITY CONTROL IN MODERN MANUFACTURING, Journal of Production Engineering, 2014, Vol. 17, No. 2, pp. 63-66, ISSN 1821-4932, UDK: 621

Kovač P., Ješić D., Gvozdenović N., Savković B., Kekić A.: ISPITIVANJE TRIBOLOŠKIH KARAKTERISTIKA U ZAVISNOST OD PRIMENJENE VRSTE ULJA U TRIBOLOŠKOM SISTEMU , Traktori i pogonske mašine, 2014, Vol. 19, No. 3, pp. 88-94, ISSN 0354-9496, UDK: 631.372

Todić A., Pejovič B., Kovač P., Ješić D., Savković B.: Improve of Toughness and Hardness of High Alloyed Steel by Vanadium and Appropriate Heat Treatment, Journal of Production Engineering, 2015, Vol. 18, No. 1, pp. 13-17, ISSN 1821-4932

Kulundžić N., Gostimirović M., Kovač P., Sekulić M., Savković B.: Micro Cutting Simulation of Abrasive Grains in the Grinding Process, Journal of Production Engineering, 2015, Vol. 18, No. 2, pp. 25-28, ISSN 1821-4932, UDK: 621

Mitrović A., Kovač P., Kulundžić N., Savković B.: 3D FINITE ELEMENT SIMULATION OF MILLING, Journal of Production Engineering, 2016, Vol. 19, No. 1, pp. 31-34, ISSN 1821-4932, UDK: 621

Savković B., Tarić M., Kovač P., Nedić B., Pucovski (Pucovsky) V., Risteiu M.: MODELING OF CUTTING TEMPERATURE IN TURNING OF HARDENED STEEL, Journal of Production Engineering, 2016, Vol. 19, No. 2, pp. 7-12, ISSN 1821-4932, UDK: 621

Ješić D., Kovač P., Golubović D., Savković B.: ODREĐIVANJE ABRAZIONIH KARAKTERISTIKA NODULARNIH LIVOVA EN-GJS-420 i EN-GJS-600, Traktori i pogonske mašine, 2016, Vol. 21, No. 5, pp. 63-69, ISSN 0354-9496, UDK: 631.372

Kovač P., Rodić D., Gostimirović M., Savković B., Ješić D.: ADAPTIVE NEURO-FUZZY MODELING OF THERMAL VOLTAGE PARAMETERS FOR TOOL LIFE ASSESSMENT IN FACE MILLING, Journal of Production Engineering, 2017, Vol. 20, No. 1, pp. 16-20, ISSN 1821-4932, UDK: 621

Vrabel M., Vinas J., Mankova I., Brezinova J., Savković B., Kovač P.: ANALYSIS OF TOOL WEAR PATTERNS IN ROUGH TURNING OF CHROMIUM HARDFACING MATERIAL, Journal of Production Engineering, 2017, Vol. 20, No. 1, pp. 35-38, ISSN 1821-4932, UDK: 621

Boca M., Kovač P., Savković B.: MODEL APPROCH OF AUTOMATION OF BOTTLING AND PACKAGING FOR INDUSTRIAL PROCESS OF BOTTLES , Journal of Production Engineering, 2017, Vol. 20, No. 2, pp. 69-72, ISSN 1821-4932, UDK: 621

Ješić D., Kovač P., Savković B., Gostimirović M., Sarjanović D., Stanivuk T., Tarić M.: EQUIPMENT FOR TOWING - BOLLARD 200 T, Machine Design, 2018, Vol. 10, No. 1, pp. 21-24, ISSN 1821-1259

Vukelić Đ., Šimunović G., Šarić T., Matin I., Savković B., Lazarević M., Tadić B.: Computer-aided design and optimization of fixtures for plastic parts machining, Journal of Production Engineering, 2018, Vol. 21, No. 1, pp. 49-54, ISSN 1821-4932

Kovač P., Savković B., Rodić D., Gostimirović M., Mankova I.: Wear of model and integral face milling cutter modelled by artificial intelligence, Journal of Production Engineering, 2018, Vol. 21, No. 1, pp. 11-16, ISSN 1821-4932, UDK: 621

Kovač P., Savković B., Rodić D., Mankova I.: Artificial inteligence approache to modeling of cutting force and tool wear relationships during dry machining, Journal of Production Engineering, 2018, Vol. 21, No. 2, pp. 13-18, ISSN 1821-4932, UDK: 621

Sekulić M., Rodić D., Gostimirović M., Savković B., Aleksić A., Kulundžić N.: Modeling of torque and thrust force in drilling using genetic algorithm, Journal of Mechatronics, Automation and Identification Technology – JMAIT, 2021, Vol. 6, No. 4, pp. 12-15, ISSN 2466-3603

Rodić D., Gostimirović M., Sekulić M., Savković B., Aleksić A., Kukolj D.: Analsys of defect layer in electrical discharge machining of non-conductive ceramic, Journal of Production Engineering, 2023, Vol. 26, No. 1, pp. 24-27, ISSN 1821-4932

20 30.00
M53
Rad u naučnom časopisu
Rad u naučnom časopisu
Mijić A., Kovač P., Savković B.: Modeliranje sila rezanja pri čeonom glodanju, Zbornik radova Fakulteta tehničkih nauka, 2009, No. Vol. XXIV, No. 6,, pp. 1807-1810, ISSN 0350-428X

Lazić B., Kovač P., Savković B.: Razvoj merno-akvizacijskoj sistema za merenje sila rezanja pri glodanju primenom virtualne instrumentacije, Zbornik radova Fakulteta tehničkih nauka, 2009, Vol. 24, No. 2, pp. 296-299, ISSN 0350-428X

Gostimirović M., Kovač P., Sekulić M., Savković B.: An Interse Heat Transfer Method for Determination of the Workpice Temperature in Grunding, Journal of Production Engineering, 2009, Vol. 12, No. 1, pp. 5-8, ISSN 1821-4932, UDK: 621

Kovač P., Gostimirović M., Sekulić M., Savković B.: A Rewiev of Research Related to Advancing Manufacturing Technology, Journal of Production Engineering, 2009, Vol. 12, No. 1, pp. 9-16, ISSN 1821-4932, UDK: 621

Kovač P., Gostimirović M., Sekulić M., Savković B.: A Rewiev to Advanced Modeling and Simulation of Machining Process, Journal of Production Engineering, 2009, Vol. 12, No. 1, pp. 17-22, ISSN 1821-4932, UDK: 621

Sekulić M., Kovač P., Gostimirović M., Jurković Z., Savković B.: A new thrust force model for drilling process, Journal of Production Engineering, 2010, Vol. 13, No. 1, pp. 19-22, ISSN 1821-4932, UDK: 621

Savković B., Kovač P., Gostimirović M., Sekulić M., Rajnović D.: Experimental study of nodular cast iron alloys during milling, Journal of Production Engineering, 2010, Vol. 13, No. 1, pp. 15-18, ISSN 1821-4932, UDK: 621

Kovač P., Mankova I., Gostimirović M., Sekulić M., Savković B.: A review of the experimental techniques for the measurement of temperature generated in material removal processes, Journal of Production Engineering, 2010, Vol. 13, No. 1, pp. 1-6, ISSN 1821-4932, UDK: 621

Kovač P., Gostimirović M., Sekulić M., Savković B.: PRIMENA SAVREMENIH METODA U ISTRAŽIVANJIMA PROCESA OBRADE REZANJEM, Tehnika - Mašinstvo, 2010, Vol. 65, No. 3, pp. 45-52, ISSN 0461-2531, UDK: 62(062.2)(497.1)

Janjatović D., Kovač P., Savković B.: PRIMENA NEURONSKE MREŽE ZA ODREĐIVANJE POSTOJANOSTI I TEMPERATURE REZANJA PRI ČEONOM GLODANJU, Zbornik radova Fakulteta tehničkih nauka, 2010, Vol. 25, No. 5, pp. 967-970, ISSN 0350-428X, UDK: 621.914:004.032.26.048

Pantović V., Kovač P., Savković B.: EKSPERIMENTALNA ISPITIVANJA OTPORA REZANJA PRI ČEONOM GLODANJU NODULARNOG LIVA, Zbornik radova Fakulteta tehničkih nauka, 2010, Vol. 25, No. 5, pp. 974-977, ISSN 0350-428X, UDK: 621.914

Rodić D., Kovač P., Savković B.: PRIMENA FAZI LOGIKE I ANFIS SISTEMA U ISTRAŽIVANJIMA PROCESA OBRADE ČEONIM GLODANJEM, Zbornik radova Fakulteta tehničkih nauka, 2010, Vol. 25, No. 17, pp. 3597-3600, ISSN 0350-428X, UDK: 621.914:004.8

Kovač P., Savković B., Mijic A., Sekulić M.: ANALITICAL AND EXPERIMENTAL STUDY OF CUTTING FORCE COMPONENTS IN FACE MILLING, Journal of Production Engineering, 2011, Vol. 14, No. 1, pp. 15-18, ISSN 1821-4932, UDK: 621

Pucovski (Pucovsky) V., Kovač P., Savković B.: PRIMENA GENETSKIH ALGORITAMA ZA ODREĐIVANJE POSTOJANOSTI I TEMPERATURE REZANJA PRI ČEONOM GLODANJU, Zbornik radova Fakulteta tehničkih nauka, 2011, Vol. 26, No. 1, pp. 1-4, ISSN 0350-428X, UDK: 621.914:004.032.26.048

Subotić V., Gostimirović M., Savković B.: ISTRAŽIVANJE TAČNOSTI OBRADE VODENIM MLAZOM, Zbornik radova Fakulteta tehničkih nauka, 2011, Vol. 16, No. 14, pp. 3259-3263, ISSN 0350-428X

Kovač P., Mankova I., Gostimirović M., Sekulić M., Savković B.: A REVIEW OF MACHINING MONITORING SYSTEMS, Journal of Production Engineering, 2011, Vol. 14, No. 1, pp. 1-6, ISSN 1821-4932, UDK: 621

Kovač P., Savković B., Serdar B., Sekulić M.: MODELING MECHANICAL AND THERMAL LOAD OF CUTTING TOOL, Acta Technica Corviniensis, 2011, Vol. 4, No. 4, pp. 77-80, ISSN 2067-3809

Kovač P., Rodić D., Pucovski (Pucovsky) V., Mankova I., Savković B., Gostimirović M.: A Review of Artifacial Inteligence Approaches Applied in Inteligent Processes, Journal of Production Engineering, 2012, Vol. 15, No. 1, pp. 1-6, ISSN 1821-4932, UDK: 621

Gostimirović M., Kovač P., Sekulić M., Savković B.: A Study of discharge Pulse Enegry in Electrical Descharge Machining, Journal of Production Engineering, 2012, Vol. 15, No. 1, pp. 7-10, ISSN 1821-4932, UDK: 621

Gostimirović M., Pucovski (Pucovsky) V., Kovač P., Rodić D., Savković B.: Modeling of Discharge Energy in Electrical Discharge Machining by the use of Genetic Programmming, Journal of Production Engineering, 2012, Vol. 15, No. 2, pp. 15-18, ISSN 1821-4932, UDK: 621

Pucovski (Pucovsky) V., Kovač P., Tolnay M., Savković B., Rodić D.: The Adequate Type of Function for Modeling tool life Selection by the use of Genetic Algorithms, Journal of Production Engineering, 2012, Vol. 15, No. 1, pp. 25-28, ISSN 1821-4932, UDK: 621

Kulundžić N., Kovač P., Savković B., Šoos Lj., Rokosz K.: FEM Simulation of Cutting Processes, Scientific Proceedings, 2013, Vol. 21, No. 1, pp. 121-130, ISSN 1338-1954

Kulundžić N., Kovač P., Savković B.: Simulacija obrade rezanja u programskom paketu Ansys, Zbornik radova Fakulteta tehničkih nauka, 2013, Vol. 28, No. 1, pp. 13-16, ISSN 0350-428X, UDK: 621.96

Perišić Lj., Savković B., Gostimirović M.: ISTRAŽIVANJE TEHNOLOŠKIH PARAMETARA PROCESA OBRADE PLAZMOM, Zbornik radova Fakulteta tehničkih nauka, 2014, Vol. 29, No. 5, pp. 781-784, ISSN 0350-428X, UDK: 621.7/.9

Mitrović D., Kovač P., Savković B.: OBNOVLJIVI IZVORI ENERGIJE - TOPLOTNE PUMPE, Zbornik radova Fakulteta tehničkih nauka, 2014, Vol. 29, No. 5, pp. 813-816, ISSN 0350-428X, UDK: 620.92

Rodić D., Gostimirović M., Kovač P., Radovanović M., Savković B.: Comparison of fuzzy logic and neural network for modelling surface roughness in edm, International Journal of Recent Advances in Mechanical Engineering, 2014, Vol. 3, No. 3, pp. 69-78, ISSN 2200-5854, UDK: DOI : 10.14810/ijmech.2014.3306

Gostimirović M., Rodić D., Kovač P., Pucovski (Pucovsky) V., Savković B.: APPLICATION OF NEURO-FUZZY SYSTEMS AND GENETIC PROGRAMMING FOR MODELLING SURFACE ROUGHNESS IN ELECTRICAL DISCHARGE MACHINING, Annals of Faculty Engineering Hunedoara - International Journal of Engineering, 2014, Vol. 7, No. 1, pp. 137-140, ISSN 1584-2665

Kovač P., Savković B., Šiđanin (Sidjanin) L., Lukač O., Mankova I.: THE INFLUENCE OF MATERIAL MICROSTRUCTURE ON THE CHIP FORMING PROCESS, Contemporary Materials, 2014, Vol. 5, No. 1, pp. 69-76, ISSN 1986-8669, UDK: UDK 621.9.01:669

Ješić D., Kovač P., Savković B.: ENERGETIC AND ECONOMIC ASPECTS OF TRIBOLOGICAL PROPERTIES OF AUSTEMPERED NODULAR CASTING, Contemporary Materials, 2016, Vol. 7, No. 1, pp. 73-76, ISSN 1986-8669, UDK: 661.665.2:620.9

Boćan N., Kovač P., Savković B., Kulundžić N.: SIMULACIJA OBRADE BUŠENJA POMOĆU METODA KONAČNIH ELEMENATA, Zbornik radova Fakulteta tehničkih nauka, 2016, Vol. 31, No. 3, pp. 414-417, ISSN 0350-428X, UDK: 621.914

Mitrović A., Kovač P., Kulundžić N., Savković B.: Analiza toplotnih pojava pri obradi glodanjem metodom konačnih elemenata , Tehnika i praksa, 2016, Vol. 15, No. 1, pp. 147-152, ISSN 2217-2130

Radić I., Kovač P., Savković B.: Tehnologije izrade kalupa za oblikovanje pneumatika, Zbornik radova Fakulteta tehničkih nauka, 2016, Vol. 31, No. 9, pp. 1559-1562, ISSN 0350-428X, UDK: 621.914

Kirin S., Kovač P., Savković B., Mirjanić S., Šooš Lj.: THE ECONOMIC SUSTAINABILITY OF A MODEL THAT BALANCES ECOLOGICAL AND POWER SUPPLY NEEDS, MM (Modern Machinery) Science Journal, 2017, Vol. 10, No. 1, pp. 1692-1695, ISSN 1803-1269, UDK: DOI: 10.17973/MMSJ.2017_02_2016143

Savković B., Kovač P., Mankova I., Gostimirović M., Rokosz K., Rodić D.: Surface roughness modeling of semi solid aluminum milling by fuzzy logic, Journal of Advances in Technology and Engineering Research, 2017, Vol. 3, No. 2, pp. 44-56, ISSN 2414-4592, UDK: DOI:10.20474/jater-3.2.2

Ješić D., Kovač P., Rodić D., Savković B., Sarjanović D.: FUZZY MODELING OF TEMPERING PROCESS OF CAST STEEL, Contemporary Materials, 2017, Vol. 8, No. 2, pp. 184-189, ISSN 1986-8669, UDK: 669.141.246

Kovač P., Savković B., Gostimirović M., Ješić D., Mankova I.: Modeling of the machining surface roughness parameters for steel difficult to machining, Analele Universităţii „Eftimie Murgu”, 2017, Vol. 24, No. 1, pp. 175-183, ISSN 1453-7397

Kuti R., Savković B., Kulundžić N.: SIMULACIJA OBRADE GLODANJEM POMOĆU METODA KONAČNIH ELEMENATA, Zbornik radova Fakulteta tehničkih nauka, 2018, Vol. 33, No. 4, pp. 493-496, ISSN 0350-428X, UDK: 621.914

Kovač P., Tarić M., Rodić D., Nedić B., Savković B., Ješić D.: Surface roughness modeling of CBN hard steel turning, Cutting & Technological System Tools, 2018, Vol. 89, No. 1, pp. 78-87, ISSN 2078-7405, UDK: 621.91

Kovač P., Tarić M., Rodić D., Savković B., Ješić D., Golubović D.: Neuro-fuzzy systems modelling of hard steel surface roughness parameters, Acta Technica Corviniensis, 2018, Vol. 11, No. 4, pp. 67-71, ISSN 2067-3809

Aleksić A., Sekulić M., Savković B., Gostimirović M., Kamenko I., Kovač P.: OPTIMIZATION OF CUTTING PARAMETERS BY NATURE-INSPIRED ALGORITHMS, Acta Technica Corviniensis, 2020, Vol. 13, No. 4, pp. 41-44, ISSN 2067-3809

Rodić D., Gostimirović M., Sekulić M., Savković B., Aleksić A.: Analysis of tool wear rate during electrical discharge machining of non-conductive material, Innovative Mechanical Engineering, 2023, Vol. 2, No. 3, pp. 9-16, ISSN 2812-9229

41 41.00
M63
Saopštenje sa skupa nacionalnog značaja štampano u celini
Saopštenje sa skupa nacionalnog značaja štampano u celini
Kovač P., Šiđanin (Sidjanin) L., Savković B., Wannasin J., Rajnović D.: Uporedno ispitivanje procesa nastajanja strugotine pri obradi legure na bazi aluminijuma , 32. Savetovanje proizvodnog mašinstva Srbije sa međunarodnim učešćem, Novi Sad: Fakultet tehničkih nauka, Novi Sad, 18-20 Septembar, 2008, pp. 65-68, ISBN 978-86-7892-131-5

Gostimirović M., Milikić D., Kovač P., Sekulić M., Savković B.: Uvođenje obrade vodenim mlazom u savremenu industrijsku proizvodnju , 32. Savetovanje proizvodnog mašinstva Srbije sa međunarodnim učešćem, Novi Sad: Fakultet tehnickih nauka, 18-20 Septembar, 2008, pp. 51-54, ISBN 978-86-7892-131-5

Pucovski (Pucovsky) V., Kovač P., Tolnay M., Savković B., Ildiko M.: Analysis of Academic Staff Mobility Potential, 20. Skup "Trendovi razvoja" - TREND, Kopaonik: Fakultet tehnickih nauka, 24-27 Februar, 2014, pp. 87-90, ISBN 978-86-7892-594-8

Ješić D., Savković B., Kovač P.: ENERGETIC AND ECONOMIC ASPECT OF TRIBOLOGICAL PROPERTIES OF AUSTEMPERED NODULAR CASTING, 7. Međunarodni naučni skup Savremeni materijali, Banja Luka: Academy of Sciences and Arts of the Republic of Srpska, 21-22 Decembar, 2014, pp. 67-72, ISBN 978-99938-21-65-6

Kovač P., Savković B., Gostimirović M., Ješić D.: ADOPTION OF SPECIFIC BORONISING TECHNOLOGY OF STEEL WORKPIECE AND EXEMINATION OF BORID LAYER WEAR, 7. Međunarodni naučni skup Savremeni materijali, Banja Luka: Academy of Sciences and Arts of the Republic of Srpska, 21-22 Decembar, 2014, pp. 73-82, ISBN 978-99938-21-65-6

Kovač P., Savković B., Ješić D., Gostimirović M.: Effect of head treatment on the fatigue strength of steel en 42CrMoS4, 8. Međunarodni naučni skup Savremeni materijali, Banja Luka: Academy of Sciences and Arts of the Republic of Srpska, 6-7 Septembar, 2015, pp. 547-559, ISBN 978-99938-21-80-9

Mitrović A., Kovač P., Kulundžić N., Savković B.: Modelovanje i simulacija procesa obrade glodanjem, 40. JUPITER konferencija, Beograd: Mašinski fakultet Beograd, 16-17 Maj, 2016, pp. 223-226, ISBN 978-86-7083-893-2

Ješić D., Kovač P., Stevović S., Savković B., Gostimirović M.: Određivanje srednje dubine boridnog sloja u zavisnosti od temperature, 9. International Scientific Conference "Contemporary Materials", Banja Luka: Academy of Sciences and Arts of the Republic of Srpska, Banja Luka, 4-5 Septembar, 2016, pp. 203-213, ISBN 978-99938-21-89-2

Sarjanović D., Ješić D., Kovač P., Novaković S., Savković B., Đorđević D.: Monitoring tribomehaničkog sistema preko sredstva za podmazivanje - sa osvrtom na PQ index, 16. International Conference "Economic / Legal / Communication aspects of the Western Balkans countries with special emphasis on Bosnia and Herzegovina in the Process of integration to the European Union", Travnik: Internacionalni univerzitet Travnik u Travniku, 15-16 Decembar, 2017, pp. 598-608, ISBN ISSN: 2232-8807

Kovač P., Rodić D., Savković B., Ješić D., Golubović D.: Modeliranje otpora rezanja pri glodanju pomoću fazi logike, 16. International Symposium INFOTEH-JAHORINA (INFOTEH), Jahorina: Istočno Sarajevo: Elektrotehnički fakultet, 22-24 Mart, 2017, pp. 416-419, ISBN 978-99976-710-0-4

Sekulić M., Pejic V., Kovač P., Gostimirović M., Savković B.: MODELOVANJE I OPTIMIZACIJA PROCESA OBRADE REZANJEM, 1. Konferencija sa međunarodnim učešćem "Primena novih tehnologija i ideja u školskom inženjerskom obrazovanju", Požega (Užička): TEHNIČKA ŠKOLA, Vuka Karadžića 6, 31210 POŽEGA, SRBIJA, 15-16 Maj, 2017, pp. 129-138, ISBN 978-86-915487-1-1

Kovač P., Ješić D., Savković B., Dašić P., Sarjanović D.: Ispitivanje visokootpornih prevlaka na mašinskim delovima na abrazivno habanje, 15. International Conference "Traffic, Ecological and Economy Problems and Perspectives of Solving of mentioned in the countries of Western Balkan with an Overview on Bosnia and Herzegovina", Travnik: Internacionalni univerzitet Travnik u Travniku, 19-20 Maj, 2017, pp. 617-624, ISBN ISSN: 2232-8807

Ješić D., Kovač P., Savković B., Dašić P., Sarjanović D.: The quality of products influences quality of life, 7. International Conference "Economics and Management - Based on New Technologies" (EMoNT), Vrnjačka Banja: SaTCIP (Scientific and Tehnical Center for Intellectual Poperty), 15-18 Jun, 2017, pp. 217-224, ISBN 978-86-6075-061-9

Golubović D., Ješić D., Kovač P., Savković B., Sarjanović D.: Poboljšanje energetske efikasnosti male hidroelektrane, 6. Savetovanje o energetici u BIH sa međunarodnim učešćem, Neum: CETEOR Sarajevo, 28-29 Septembar, 2017, pp. 37-43, ISBN 977-22-330-1200-6

Kovač P., Savković B., Rodić D., Gostimirović M., Sekulić M., Šooš Lj.: Digitalizacija experimentalnih vežbi iz predmeta teorija obradnih procesa, 24. Trendovi razvoja - TREND, Kopaonik: Fakultet tehničkih nauka, Novi Sad, 21-23 Februar, 2018, pp. 316-319, ISBN 978-86-6022-031-0

Kulundžić N., Savković B., Kovač P., Gostimirović M., Ješić D.: Simulacija temperaturnog polja i sila rezanja pri bušenju, 37. Savetovanje proizvodnog mašinstva Srbije - SPMS, Kragujevac: University of Kragujevac, Faculty of Engineering, 25-26 Oktobar, 2018, pp. 161-164, ISBN 978-86-6335-057-1

Savković B., Kovač P., Golubović D., Gostimirović M., Ješić D.: Monitoring potrošnje snage pri glodanju pomoću utrošene električne energije, 4. International Scientific Conference "Conference on Mechanical Engineering Technologies and Applications" - COMETa, Jahorina: Faculty of Mechanical Engineering East Sarajevo, 27-30 Novembar, 2018, pp. 105-113, ISBN 978-99976-719-4-3

Kovač P., Savković B., Šooš L., Kulundžić N., Sarjanović D.: Recikliranje ulja iz motornih vozila, Proceedings of International University Travnik, 2018, Vol. 8, No. 18, pp. 408-416, ISSN 2232-8807, 18. International Conference "Development trends of the Western Balkan countries based on knowledge with a special overview on BIH within the process of accession to EU", Travnik: Internacionalni Univerzitet Travnik, 14-15 Decembar, 2018, pp. 408-416

Aleksić A., Rodić D., Gostimirović M., Sekulić M., Savković B., Kulundžić N.: Modelovanje hrapavosti obrađene površine pri sečenju plazmom, 13. International Scientific Conference ETIKUM, Novi Sad: Fakultet tehničkih nauka, 2-4 Decembar, 2021, pp. 89-92, ISBN 978-86-6022-387-8

Rodić D., Gostimirović M., Sekulić M., Savković B., Aleksić A.: Analiza proizvodnosti kod elektroerozivne obrade u dielektrikumu sa pomešanim prahom, 43. JUPITER konferencija, Beograd: Univerzitet u Beogradu - Mašinski fakultet, 4-5 Oktobar, 2022, pp. 67-72, ISBN 978-86-6060-137-9

Božić D., Ranisavljev M., Milošević M., Savković B., Lukić D.: The influence of the technological parameters of the production process and the material quality on the microgeometric product specifications, 39. International Conference of Production Engineering - ICPE-S, Novi Sad: Fakultet tehničkih nauka u Novom Sadu, 26.-27. Oktobar 2023., 26-27 Oktobar, 2023, pp. 388-393, ISBN 978-86-6022-610-7

Rodić D., Gostimirović M., Sekulić M., Savković B., Aleksić A.: Material removal rate during electrical discharge machining of zirconium oxide, 39. Savetovanje proizvodnog mašinstva Srbije - SPMS, Novi Sad: Univerzitet u Novom Sadu, Fakultet tehničkih nauka, 26-27 Oktobar, 2023, pp. 153-157

Košarac A., Sekulić M., Savković B., Moljević S., Šikuljak L., Anić J., Aleksić A.: SMALL DATASET CHALLENGES: ASSESSING THE PERFORMANCE OF NEURAL NETWORKS AND RANDOM FORESTS IN TI6AL4V ALLOY MACHINING OPTIMIZATION, 14. International Scientific Conference ETIKUM, Novi Sad: Univerzitet u Novom Sadu, Fakultet tehničkih nauka, 7-9 Decembar, 2023, pp. 45-50, ISBN 978-86-6022-617-6

Aleksić A., Gostimirović M., Sekulić M., Savković B., Rodić D.: OPTIMIZATION OF SURFACE ROUGHNESS IN TURNING OF ALUMINUM ALLOY 2024-T3 USING TAGUCHI METHOD, 39. Savetovanje proizvodnog mašinstva Srbije - SPMS, Novi Sad: Univerzitet u Novom Sadu, Fakultet tehničkih nauka, 26-27 Oktobar, 2023, pp. 219-224, ISBN 978-86-6022-610-7

Savković B., Sekulić M., Košarac A., Rodić D., Aleksić A., Moljević S., Anić J.: EFFECTS OF APPLYING A HYBRID MILLING PROCESS ASSISTED BY ULTRASONIC VIBRATIONS, 39. Savetovanje proizvodnog mašinstva Srbije - SPMS, Novi Sad: Univerzitet u Novom Sadu, Fakultet tehničkih nauka, 26-27 Oktobar, 2023, pp. 189-194, ISBN 978-86-6022-610-7

25 12.50
M71
Odbranjena doktorska disertacija
Odbranjena doktorska disertacija
Savković B.: Modeliranje funkcija obradivosti pri procesu obrade glodanjem, Novi Sad, Fakultet tehničkih nauka, 2015, str. 1-214

1 6.00
M85
Prototip, nova metoda, softver, standardizovan ili atestiran instrument,
Prototip, nova metoda, softver, standardizovan ili atestiran instrument,
Kovač P., Gostimirović M., Sekulić M., Savković B.: Programsko i tehničko rešenje virtualne instrumentacije za merenje otpora rezanja pri čeonom glodanju, 2010

Kovač P., Gostimirović M., Sekulić M., Savković B.: Programsko i tehničko rešenje virtualne instrumentacije za merenje otpora rezanja pri bušenju, 2010

Kovač P., Ješić D., Gostimirović M., Savković B., Rodić D.: Uređaj za tribološko ispitivanje kliznih ležajeva od metalnih materijala, polimera i kompozita, 2015

3 6.00

Korisnički servis