Univerzitet u Novom Sadu i Pokrajinski sekretarijat za visoko obrazovanje i naučnoistraživačku delatnost

Karton naučnog radnika

Prezime: Pavlović

Ime: Živko

APVNT broj: 286

Organizacija: Fakultet tehničkih nauka u Novom Sadu

Produkcija - zbirni rezultati
Oznaka Naziv kriterijuma produkcije Broj Poena
148 195.10
M13
Monografska studija/poglavlje u knjizi M11 ili rad u tematskom zborniku vodećeg međunarodnog značaja
Monografska studija/poglavlje u knjizi M11 ili rad u tematskom zborniku vodećeg međunarodnog značaja
Pavlović Ž., Dedijer S., Draganov S., Karlović I., Jurič (Rilovski) I.: Printing on Polymers, chapter Offset Printing, Amsterdam, Elsevier Inc, 2015, str. 217-238, ISBN 9780323374682

Vladić G., Banjanin B., Kašiković N., Pavlović Ž.: Polymers for 3D Printing, chapter 6 - Vat photopolymerization, Oksford, Elsevier Inc., William Andrew - Applied Science Publishers, 2022, str. 65-74, ISBN 978-0-12-818311-3

2 12.00
M21
Rad u vrhunskom međunarodnom časopisu
Rad u vrhunskom međunarodnom časopisu
Adamović (Majkić) S., Prica M., Dalmacija B., Rapajić S., Novaković D., Pavlović Ž., Maletić S.: Feasibility of electrocoagulation/flotation treatment of waste offset printing developer based on the response surface analysis, Arabian Journal of Chemistry, 2016, Vol. 9, No. 1, pp. 152-162, ISSN 1878-5352, UDK: DOI: http://dx.doi.org/10.1016/j.arabjc.2015.03.018

Zołek-Tryznowska Z., Prica M., Pavlović Ž., Cvetićanin L., Annusik T.: The influence of aging on surface free energy of corona treated packaging films, Polymer Testing, 2020, Vol. 89, No. 106629, ISSN 0142-9418

2 16.00
M22
Rad u istaknutom međunarodnom časopisu
Rad u istaknutom međunarodnom časopisu
Pavlović Ž., Muck T., Hladnik A., Karlović I.: A Comparative Study of Offset Plate Quality Parameters using Image Processing and Analytical Methods, Acta Polytechnica Hungarica, Journal of Applied Sciences, 2012, Vol. 9, No. 6, pp. 181-193, ISSN 1785-8860

Pavlović Ž., Novaković D., Cigula T.: Wear analysis of the offset printing plate`s non/printing areas depending on exploitation, Tehnički vjesnik - Technical Gazette, 2012, Vol. 19, No. 3, pp. 479-484, ISSN 1330-3651, UDK: 655.344:620.178.16

Risović D., Pavlović Ž.: Performance Assessment of Methods for Estimation of Fractal Dimension From Scanning Electron Microscope Images, Scanning, 2013, Vol. 35, No. 6, pp. 402-411, ISSN 0161-0457

Urbas R., Milošević R., Kašiković N., Pavlović Ž., Stankovič Elesini U.: Microcapsules application in graphic arts industry: a review on the state-of-the-art, Iranian Polymer Journal, 2017, Vol. 26, No. 7, pp. 541-561, ISSN 1735-5265, UDK: doi:10.1007/s13726-017-0541-1

Petrović S., Kašiković N., Novaković D., Pavlović Ž., Bošnjaković G., Spiridonov I.: Exploitation influence on compressible polyurethane flexographic sleeve properties, Nordic Pulp and Paper Research Journal, 2020, Vol. 35, No. 3, pp. 440-456, ISSN 0283-2631

Pál (Apro) M., Dedijer S., Koltai L., Gregor-Svetec D., Cigula T., Pavlović Ž., Milić N.: Fold cracking of coated papers: investigation on automated computer-aided visual assessment method, Nordic Pulp and Paper Research Journal, 2021, Vol. 36, No. 4, pp. 626-642, ISSN 0283-2631

Jurič (Rilovski) I., Zdravković S., Kašiković N., Dedijer S., Pál (Apro) M., Pavlović Ž., Karlovits I.: Comparative study of different methods for the assessment of print nonuniformity and their correlation with the human visual system, Coloration Technology, 2023, ISSN 1472-3581

7 35.00
M23
Rad u međunarodnom časopisu
Rad u međunarodnom časopisu
Pavlović Ž., Risović D., Novaković D.: Comparative study of direct and indirect, image-based profilometry in characterization of surface roughness,, Surface and Interface Analysis, 2012, Vol. 44, No. 7, pp. 825-830, ISSN 0142-2421, UDK: Online ISSN:1096-9918

Pavlović Ž., Dedijer S., Kašiković N., Novaković D., Pál (Apro) M., Risović D.: Evaluation of effective models of offset CTP plate aluminium oxide surface roughness characterisation, International Journal of Surface Science and Engineering, 2017, Vol. 11, No. 5, pp. 433-449, ISSN 1749-7868

Spiridonov I., Boeva R., Lozanova-Doncheva I., Bozhkova T., Pavlović Ž., Vladić G., Kašiković N., Stančić M., Tacheva B.: Study of color characteristic changes of printed images under artificial ageing on different papers, Bulgarian Chemical Communications, 2017, Vol. 49, No. L, pp. 229-236, ISSN 0324-1130

Pavlović Ž., Pál (Apro) M., Cigula T., Rumyana B., Boeva R., Spiridonov I., Bozhkova T., Prica M.: Comparative study of offset plate tone value reproduction using different measuring and image processing tools, Bulgarian Chemical Communications, 2017, Vol. 49, No. L, pp. 222-228, ISSN 0324-1130

Boeva R., Spiridonov I., Pavlović Ž., Vladić G.: Investigation of color characteristics changes of semi chemical pulp samples in process of ageing, Bulgarian Chemical Communications, 2017, Vol. 49, No. L, pp. 126-129, ISSN 0324-1130

5 15.00
M33
Saopštenje sa međunarodnog skupa štampano u celini
Saopštenje sa međunarodnog skupa štampano u celini
Novaković D., Pešterac Č., Pavlović Ž., Karlović I., Stipančević T.: CTP PDF Quality control , 3. IARIGAI, Dubrovnik: Acta Graphica Publishers, 7-10 September, 2003, pp. 203-211, ISBN 953-96276-6-4

Novaković D., Karlović I., Novotny E., Pavlović Ž.: Colour characterization and ICC profiling of different paper substrates on the printing press, 5. IN – TECH -ED, Budimpešta: Faculty of Light Industry Engineering and Hungarian Society of Textile Technology and Science, 8-9 September, 2005, pp. 257-264, ISBN 9639397067

Novaković D., Vujković I., Karlović I., Pavlović Ž.: Packaging design through the parameters of production steps, 2. Danubius Design Conference, Beograd: University of Arts, Faculty of Applied Arts, 5-8 October, 2005

Novaković D., Karlović I., Pavlović Ž., Pešterac Č., Dedijer S., Stipančevic T.: Computer to tone value analysis with different plate reader devices , 38. Simpozij o novostih v tekstilstvu in 3. Simpozij o novostih v grafiki, Ljubljana: Univerza v Ljubljani, Naravnoslovnotehniška fakulteta, Oddelek za tekstilstvo, 21 June, 2007, pp. 184-189, ISBN 978-961-6045-46-9

Kiurski J., Pavlović Ž., Vojinović-Miloradov M., Adamović D.: Environmental Aspects of Photopolymer printing Plate Application , 2. The international conference Engineering of Environment Protection - TOP, Bratislava: Slovak University of Technology in Bratislava, Slovak Republic, 5-10 June, 2008, pp. 183-189, ISBN 978-80-227-2896-6

Novaković D., Karlović I., Pavlović Ž., Dedijer S.: Colorimetric and tone value differences in varnished samples of offset prints made with conventional and hybrid inks measured with different colour measuring devices , 12. "Blaž Baromić" International Conference on printing, design and graphic communications, Split: University of Zagreb, Faculty of Graphic Arts, Croatia, University of Ljubljana, Ogranak Matice Hrvatske Senje, Pulp and Paper Institute, Ljubljana, Slovenia, 21-24 September, 2008, pp. 171-175, ISBN 987-953-96020-9-1

Adamović D., Pavlović Ž., Karlović I., Kiurski J., Vojinović-Miloradov M.: Gas chromatography detection of air polluted graphic indoor, 9. PHYSICAL CHEMISTRY, International Conference on Fundamental and Applied Aspects of Physical Chemistry, Beograd: Society of Physical Chemists of Serbia, 24-26 September, 2008, pp. 641-643, ISBN 978-86-82475-13-2

Adamović D., Kiurski J., Vojinović-Miloradov M., Turk Sekulić M., Pavlović Ž.: Detection of BTEX in printing plant , 2. PSU-UNS International Conference on Bioscience: Food, Agriculture and Environment, Novi Sad: University of Novi Sad, Serbia, 22-24 June, 2008, pp. 297-300, ISBN 978-86-499-0171-1

Gebeješ A., Pavlović Ž.: The influence of a print run on the surface changes of the thermal CtP plate , 3. "Printig Future Days" international IARIGARI student conference on print and media technology, Chemnitz: Verlag für Wissenchaft und Forschung, Berlin, 2-5 November, 2009, pp. 85-89, ISBN 978-389700-108-4

Gojo M., Pavlović Ž., Novaković D.: Analysing of the surface roughness of non printing elements on CtP thermal offset plate, 11. International design conference, Dubrovnik: Faculty of Graphic Arts, University of Zagreb, 17-20 May, 2010, pp. 1941-1946, ISBN 978-953-7738-08-2

Mokuš G., Pavlović Ž., Novaković D.: Surface roughness of non – printing elements and its influence on the print run, 5. International Symposium on Novelties in Graphics, Ljubljana: University of Ljubljana, Faculty of natural Sciences and Engineering, Department of Textiles, 27-29 May, 2010, pp. 851-857, ISBN 978-961-6045-80-3

Pál (Apro) M., Dedijer S., Pavlović Ž.: Profilometric analysis of foil laminated papers, 5. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: Fakultet tehničkih nauka, 11-12 November, 2010, pp. 77-82, ISBN 978-86-7892-294-7

Pál (Apro) M., Novaković D., Dedijer S., Pavlović Ž., Karlović I.: Micro-topography analysis of foil laminated papers, 1. International Joint Conference on Environment and Light Industry Technologies, Budimpešta: Rejtő Sándor Faculty of Light Industry and Environmental Engineering, 18-19 November, 2010, pp. 173-180, ISBN 978-615-5018-08-4

Dedijer S., Pavlović Ž., Pál (Apro) M., Šušić N.: Surface roughness factors of flexo printed solid areas on aluminium foil and characterisation of UCA, 5. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: Faculty of technical sciences, Graphic engineering and design, 11-12 November, 2010, pp. 45-52, ISBN 978-86-7892-294-7

Cigula T., Pavlović Ž., Gojo M., Risović D.: Weeting of offset printing plate`s non/printing areas as a function of print run, 5. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: Faculty of Technical Sciences, Graphic Engineering and design, 11-12 November, 2010, pp. 211-218, ISBN 978-86-7892-294-7

Pavlović Ž., Cigula T., Novaković D., Pál (Apro) M.: Influence of printing process on printing plate`s surface characteristics , 1. International Joint Conference on Environment and Light Industry Technologies, Budimpešta: Rejtő Sándor Faculty of Light Industry Engineering, 18-19 November, 2010, pp. 135-142, ISBN 978-615-5018-08-4

Dedijer S., Pál (Apro) M., Pavlović Ž., Cigula T., Obrenović B.: Influence of ink solvent concentration on wetting of flexo printing plate and PE foil, 2. International Joint Conference on Environmental and Light Industry Technologies, Budimpešta: Rejtő Sándor Faculty of Light Industry and Environmental Engineering, 21-22 November, 2011, pp. 143-150, ISBN 978-615-5018-23-7

Milić N., Dedijer S., Pál (Apro) M., Pavlović Ž.: The statistical analysis of processing conditions’ influence on the surface roughness of flexo printing plate , 6. International Symposium on Graphic Engineering and Design, GRID, Novi Sad, 15-16 November, 2012, pp. 141-150, ISBN 987-86-7892-457-6

Pál (Apro) M., Novaković D., Pavlović Ž., Dedijer S.: Influence of the scanning resolution on image segmentation accuracy for an objective fold cracking evaluation, 11. Seminar in Graphic Arts, Pardubice: University of Pardubice, Department of Graphic Arts and Photophysics, 17-18 June, 2013, pp. 138-143

Pavlović Ž., Dedijer S., Pál (Apro) M., Cigula T.: Influence of the pad printing plate‘ printing element depth on the quality of the printed product, 11. Seminar in Graphic Arts, Pardubice: University of Pardubice, Department of Graphic Arts and Photophysics, 2013, 17-18 June, 2013, pp. 151-156, ISBN 978-80-7395-459

Prica M., Novaković D., Adamović (Majkić) S., Dedijer S., Pavlović Ž., Karlović I., Kašiković N.: Environmental problems in printing industry in Serbia, 4. International Joint Conference on Environmental and Light Industry Technologies, Budimpešta: Sandor Rejto Faculty of Light Industry and Environmental Engineering, Obuda University, 20-22 November, 2013, pp. 409-415, ISBN 978-615-5018-93-0

Urbas R., Pavlović Ž., Draganov S., Stankovič Elesini U.: Offset printing by the microcapsules - influence on the properties of paper substrate, 7. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: Faculty of Technical Sciences, Department of Graphic Engineering and Design, 2014, 13-14 November, 2014, pp. 51-58, ISBN 978-86-7892-647-1

Pavlović Ž., Dedijer S., Stankovič Elesini U., Urbas R.: Structure of microcapsules and its use in the industry - overview, 7. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: Faculty of Technical Sciences, Department of Graphic Engineering and Design, 2014, 13-14 November, 2014, pp. 65-70, ISBN 978-86-7892-647-1

Cigula T., Pavlović Ž., Fuchs Godec R., Risović D.: Influence of sodium metasilicate solution`s characteristics on the developing of the offset plate, 7. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: Novi Sad : Faculty of Technical Sciences, Department of Graphic Engineering and Design, 2014, 13-14 November, 2014, pp. 71-75, ISBN 978-86-7892-647-1

Dedijer S., Pál (Apro) M., Pavlović Ž., Novaković D.: Surface roughness analysis of conventional flexo printing plate in dependence of developing and light finishing phase, 1. Wood, Pulp & Paper, Polygrafia Academica 2014, Bratislava: Slovak University of Technology, Faculty of Chemical and Food Technology, 12-13 March, 2014, pp. 101-106, ISBN 978-80-89597-16-1

Dedijer S., Pavlović Ž., Pál (Apro) M., Novaković D.: Comparative analysis of tone value reproduction using different film making technologies, 8. Sigt - 7th Symposium of Information and Graphic Arts Technology, Ljubljana: of Natural Sciences and Engineering, Department of Textiles, Chair of Information and Graphic Art Technology, 5-6 June, 2014, pp. 76-80, ISBN 978-961-6900-09-6

Dedijer S., Pál (Apro) M., Pavlović Ž., Vladić G., Novaković D.: Possibilites of Flexo Printing Plate Elements Characterisation by Image Processing, 5. International Joint Conference on Environmental and Light Industry Technologies, Budimpešta: Obuda University, 19-20 November, 2015, pp. 82-91, ISBN 978-615-5460-60-9

Milošević R., Kašiković N., Pavlović Ž., Stankovič Elesini U., Urbas R.: The Possibility of Microcapsules Application Using Pad Printing Technology, 8. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: Univerzitet u Novom Sadu, Fakultet tehničkih nauka, 3-4 November, 2016, pp. 47-55, ISBN 978-86-78928-67-3

Urbas R., Qualizza N., Pavlović Ž., Stankovič Elesini U.: Production of tactile illustrations, 8. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: Fakutlet tehničkih nauka, Novi Sad, 3-4 November, 2016, pp. 63-71, ISBN 978-86-78928-67

Dedijer S., Tomić I., Pál (Apro) M., Pavlović Ž., Jurič (Rilovski) I.: Color Reproduction Quality in Multi-Pass Ink Jet Printing, 8. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, Department of Graphic Engineering and Design, 3-4 November, 2016, pp. 225-230, ISBN 978-86-78928-67-3

Milošević R., Kašiković N., Pavlović Ž., Stanković Elesini U., Kukuruzović D., Urbas R.: INFLUENCE OF MICROCAPSULES’ CONCENTRATION ON THE PHYSICAL AND SURFACE CHARACTERISTICS OF THE PRINTS, 2. 2nd International Printing Technologies Symposium – PrintIstanbul 2017, Istanbul: Marmara Üniversitesi, 11-12 October, 2017, pp. 133-142, ISBN 978-9944-0636-7-8

Kašiković N., Vladić G., Milošević R., Đurđević S., Jurič (Rilovski) I., Novaković D., Pavlović Ž.: RUBBING FASTNESS PROPERTIES OF DIGITAL PRINTED SAMPLES, 2. 2nd International Printing Technologies Symposium – PrintIstanbul 2017, Istanbul: Marmara Üniversitesi, 11-12 October, 2017, pp. 295-393, ISBN 978-9944-0636-7-8

Tomić I., Dedijer S., Jurič (Rilovski) I., Pál (Apro) M., Pavlović Ž., Vladić G.: Influence of Resolution and Print Settings on Colour Reproduction in Ink-Jet Printing, 2. 2nd International Printing Technologies Symposium – PrintIstanbul 2017, Istanbul: Marmara University, 11-12 October, 2017, pp. 273-282, ISBN 978-9944-0636-7-8

Pál (Apro) M., Dedijer S., Kašiković N., Vladić G., Novaković D., Pavlović Ž., Banjanin B.: Investigation of adhesive layer thickness distribution of perfect bounded broshures, 11. Innovations in Publishing, Printing and Multimedia Technologies, Kaunas: Kaunas University of Applied Sciences, 19-20 April, 2018, pp. 90-96

Milošević R., Kašiković N., Pavlović Ž., Stančić M., Urbas R.: Characterization of Coated Prints With Fragranced Microcapsules, 9. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: Fakultet tehničkih nauka, 8-10 November, 2018, pp. 181-188, ISBN 978-86-6022-115-7

Dedijer S., Tomić I., Pál (Apro) M., Jurič (Rilovski) I., Pavlović Ž., Milić N.: Repeatability and reproduction accuracy in electrophotography for color difference evaluations, 9. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: Faculty of Technical Sciences, 8-10 November, 2018, pp. 313-321, ISBN 978-86-6022-115-7

Pál (Apro) M., Dedijer S., Pavlović Ž., Banjanin B., Vasić J.: Statistical analysis of adhesive layer thickness` distribution on perfect bounded brochures, 9. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: Faculty of Technical Sciences, 8-10 November, 2018, pp. 197-203, ISBN 978-86-6022-115-7

Milošević R., Kašiković N., Pavlović Ž., Kojić S., Kukuruzović D., Cigula T., Urbas R.: ANALYSIS OF PHYSICAL AND MECHANICAL CHARACTERISTICS OF FUNCTIONAL COATINGS WITH FRAGRANCED MICROCAPSULES, 3. International Printing Technologies Symposium, Istambul: Marmara Üniversitesi, 10-12 October, 2019, pp. 173-179, ISBN 978-9944-0636-9-2

Dedijer S., Tomić I., Pál (Apro) M., Pavlović Ž., Bošnjaković G., Vladić G., Petrović S.: ASSESSMENT OF SHORT TERM REPEATABILITY IN ELECTROPHOTOGRAPHY IN DEPENDENCE OF COLOUR PROFILES, 7. IJCELIT 2019 - International Joint Conference on Enviromental and Light Industry Technologies, Budimpešta: Óbuda University - Sándor Rejtő Faculty of Light Industry and Environmental Engineering, 21-22 November, 2019, pp. 118-125, ISBN 978-963-449-64-4

Jurič (Rilovski) I., Milić N., Kašiković N., Pavlović Ž., Dedijer S., Pál (Apro) M.: Influence of paper properties on print nonuniformity , 20. WPP PA - Wood, Pulp & Paper Polygrafia Academica 2020, Bratislava: Vydala Slovenská chemická knižnica FCHPT STU v Bratislave, 2020., 11-12 March, 2020, pp. 116-121, ISBN 978-80-8208-036-3

Prica M., Tubić (rođ. Aleksić) A., Vujić rođ. Lončarski M., Gvoić V., Vasiljević S., Pavlović Ž., Agbaba J.: Application of advanced oxidation process for the removal of synthetic water-based printing dye and microplastics from aqueous solution, 10. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, Department of Graphic Engineering and Design, 12-14 November, 2020, pp. 243-249, ISBN 978-86-6022-303-8

Milošević R., Kašiković N., Pavlović Ž., Petrović S., Kukuruzović D., Urbas R.: THE EFFECTS OF FRAGRANCED MICROCAPSULES APPLICATION ON THE PHYSICAL AND PRINT QUALITY CHARACTERISTICS OF THE PRINTS, 10. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: University of Novi Sad, Faculty of technical sciences, 12-14 November, 2020, pp. 139-143, ISBN 978-86- 6022-303-8

Dedijer S., Pál (Apro) M., Tomić I., Poljak S., Pavlović Ž., Jurič (Rilovski) I., Milić N.: Statistical analysis of the influence of print run on surface roughness of digital flexo printing plates’ solid tone areas, 10. 10th International Symposium GRID 2020, Novi Sad: Faculty of Technical Sciences, University of Novi Sad, 12-14 November, 2020, pp. 281-288, ISBN 978-86-6022-302-1

Petrović S., Kašiković N., Pavlović Ž., Dedijer S., Bošnjaković G., Lilić A.: Compressible flexographic sleeve exploitation influence on print uniformity and colour difference, 20. WPP PA - Wood, Pulp & Paper Polygrafia Academica 2020, Bratislava: Slovenská chemická knižnica FCHPT STU v Bratislave, 11-12 March, 2020, pp. 42-47, ISBN 978-80-8208-036-3

Petrović S., Kašiković N., Zeljković Ž., Dedijer S., Pavlović Ž., Đurđević S.: INFLUENCE OF THE FLEXOGRAPHIC PRINTING PROCESS PARAMETERS AND MATERIAL PROPERTIES ON PRINT QUALITY, 2. International Conference on Circular Packaging CPC, Ljubljana: Pulp and Paper Institute; Faculty of Polymer Technology, 9-10 November, 2021, pp. 321-333, ISBN 978-961-90424-6-5

Jurič (Rilovski) I., Novaković D., Kašiković N., Pavlović Ž., Dedijer S., Pál (Apro) M.: THE USE OF DIFFERENT DEVICES FOR PRINT DIGITIZATION IN PRINT QUALITY ANALYSIS OF PRINT MOTTLE, 8. IJCELIT 2021 -INTERNATIONAL JOINT CONFERENCE ON ENVIRONMENTAL AND LIGHT INDUSTRY TECHNOLOGIES, Budimpešta: Rejtő Sándor Faculty of Light Industry and Environmental Engineering of Óbuda University, 18-19 November, 2021, pp. 39-47, ISBN 978-963-449-262-7

Jurič (Rilovski) I., Kašiković N., Pavlović Ž., Pál (Apro) M., Juretić I.: INFLUENCE OF TEST CHART CONTRAST ON QUANTIFICATION OF PHOTO SHARPNESS, 11. INTERNATIONAL SYMPOSIUM ON GRAPHIC ENGINEERING AND DESIGN, Novi Sad: Fakultet tehničkih nauka, Grafičko inženjerstvo i dizajn, 3-5 November, 2022, pp. 275-278, ISBN 978-86-6022-533-9

Pál (Apro) M., Dedijer S., Jurič (Rilovski) I., Bošnjaković G., Kašiković N., Pavlović Ž.: STATISTICAL APPROACH IN FOLD CRACK DISTRIBUTION ANALYSIS, 11. INTERNATIONAL SYMPOSIUM ON GRAPHIC ENGINEERING AND DESIGN, Novi Sad: Fakultet tehničkih nauka, Grafičko inženjerstvo i dizajn, 3-5 November, 2022, pp. 677-684, ISBN 987-86-6022-533-9

Vladić G., Kašiković N., Pavlović Ž., Đurđević S., Bošnjaković G., Gvoka T.: CONTEMPORARY APPLICATIONS OF PULP MOULDED PACKAGING, 14. Conference of Chemists, Technologists and Environmentalists of Republic of Srpska, Banja Luka: University in Banja Luka, Faculty of Technology, 21-22 October, 2022, pp. 184-189, ISBN 978-99938-54-98-2

Dedijer S., Kašiković N., Pál (Apro) M., Pavlović Ž., Vladić G., Tomić I., Banjanin B.: AN OVERVIEW OF VARIOUS POSSIBILITIES OF 3D PRINTING TECHNIQUES IN THE PRODUCTION OF FLEXOGRAPHIC PRINTING PLATES, 14. Conference of Chemists, Technologists and Environmentalists of Republic of Srpska, Banja Luka: University in Banja Luka, Faculty of Technology, 21-22 October, 2022, pp. 176-183, ISBN 978-99938-54-98-2

Pál (Apro) M., Banjanin B., Dedijer S., Jurič (Rilovski) I., Pavlović Ž., Bošnjaković G., Gvoka T.: IMAGE PROCESSING-BASED EVALUATION OF BLIND EMBOSSING QUALITY ON PULP-COLORED SUBSTRATES, 4. International Printing Technologies Symposium, Istambul: Printing Industry Education Foundation (BASEV), 5-6 October, 2023, pp. 235-244, ISBN 978-605-70806-3-9

Gvoić V., Petrović S., Pavlović Ž., Bošnjaković G., Prica M.: Adsorption mechanism of Magenta flexographic printing dye on activated carbon, 9. International Joint Conference on Environmental and Light Industry Technologies, Budimpešta: Obuda University, 10 November, 2023, pp. 54-62, ISBN 978-963-449-350-1

52 52.00
M34
Saopštenje sa međunarodnog skupa štampano u izvodu
Saopštenje sa međunarodnog skupa štampano u izvodu
Dedijer S., Novaković D., Gužvica M., Pavlović Ž., Pál (Apro) M.: Evaluation of Pad Printed Electro Conductive Elements, 10. Seminar in Graphic Arts, Pardubice: University of Pardubice, Department of Graphic Arts and Photophysics, 19-21 September, 2011, pp. 157-157, ISBN 978-80-7395-420-8

Pavlović Ž.: Environmental property of eco friendly printing forms for offset and flexo printing, 1. COST Training School 'Printing of bio-based materials in packaging', Budimpešta: Faculty of Light Industry and Environmental Engineering, Obuda University, 24-27 September, 2013, ISBN 978-615-5018-87-9

Adamović (Majkić) S., Kovač P., Prica M., Pavlović Ž., Stančić M.: The success of electrocoagulation/flotation treatment in removing turbidity from waste fountain solution, 21. TOP 2015-Engineering of environment protection, Bratislava: Slovak University of Technology in Bratislava, 23-25 June, 2015, pp. 18-18, ISBN 978-80-227-4376-1

Urbas R., Milošević R., Pavlović Ž., Kašiković N., Stankovič Elesini U.: Microcapsule structure and its application in the printing industry, 9. International Engineering Symposium at Banki Budapest, Budimpešta: Óbuda University Donát Bánki Faculty of Mechanical and Safety Engineering, 27 November, 2017, pp. 83-83

Pál (Apro) M., Koltai L., Dedijer S., Kašiković N., Pavlović Ž., Vladić G., Tomić I.: Preliminary analysis of crack distribution for objective fold-crack assessment, 1. IJCELIT 2017 - International Joint Conference on Enviromental and Light Industry Technologies, Budimpešta: Rejtő Sándor Faculty of Light Industry and Environmental Protection Engineering, 23-24 November, 2017, pp. 27-27, ISBN 978-963-449-061-6

Dedijer S., Pál (Apro) M., Tomić I., Pavlović Ž., Vasić J., Vladić G., Kašiković N.: Study of line and dot elements reproduction on digital flexo printing plates using flexcel nx imaging technology, 1. IJCELIT 2017 - International Joint Conference on Enviromental and Light Industry Technologies, Budimpešta: Rejtő Sándor Faculty of Light Industry and Environmental Protection Engineering, 23-24 November, 2017, ISBN 978-963-449-061-6

Milošević R., Kašiković N., Pavlović Ž., Stanković Elesini U., Cigula T., Urbas R.: Analysis of Coatings With Scented Microcapsules, 1. International Conference on Electron Microscopy of Nanostructures ((ELMINA), Beograd: Serbian Academy of Sciences and Arts, 27-29 August, 2018, pp. 131-133, ISBN 978-86-7025-785-6

Milošević R., Kašiković N., Pavlović Ž., Cigula T., Urbas R.: ANALYSIS OF PHYSICAL AND OPTICAL PROPERTIES OF COATED PRINTS WITH FRAGRANCED MICROCAPSULES, 7. IJCELIT 2019 - International Joint Conference on Enviromental and Light Industry Technologies, Budimpešta: Rejtő Sándor Faculty of Light Industry and Environmental Engineering, Obuda University, 21-22 November, 2019, pp. 18-18, ISBN 978-963-449-164-4

8 4.00
M36
Uređivanje zbornika saopštenja međunarodnog naučnog skupa
Uređivanje zbornika saopštenja međunarodnog naučnog skupa
Pavlović Ž.: Proceedings - The Eighth International Symposium GRID 2016, 8. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: Fakultet tehniökih nauka, 3-4 November, 2016, pp. 1-499, ISBN 978-86-78928-67-3

1 1.00
M53
Rad u naučnom časopisu
Rad u naučnom časopisu
Karlović I., Novaković D., Erzebet N., Pavlović Ž.: Razlike u ostvarivom opsegu boja kod ofset štampe na papirnim podlogama , Dobar Otisak, 2004, Vol. 6, No. 74, pp. 10-14

Karlović I., Novaković D., Novotny E., Pavlović Ž.: Razlike u ostvarivom opsegu boja kod ofsetnog tiska na papirnim podlogama, Ambalaža, 2004, No. 4, pp. 15-21, ISSN 1845-9935

Novaković D., Pešterac Č., Pavlović Ž., Karlović I.: Budućnost grafičkih tehnologija , Dobar Otisak, 2004, Vol. 6, No. 75, pp. 25-28

Novaković D., Karlović I., Pavlović Ž.: Specifičnosti dizajna ambalaže, Ambalaža, 2005, No. 4, pp. 15-19, ISSN 1845-9935

Novaković D., Karlović I., Pavlović Ž., Pešterac Č.: Refleksioni denzitometri u kalibraciji CtP osvetljivača , Grafičar, 2007, No. 2, pp. 16-19, ISSN 1452-6786

Marić S., Novaković D., Pavlović Ž.: Analiza uticaja procesnih parametara na izradu digitalnih flekso štamparskih formi, Zbornik radova Fakulteta tehničkih nauka, 2009, Vol. 24, No. 5, pp. 1636-1639, ISSN 0350-428X

Ivković M., Novaković D., Pavlović Ž.: Istraživanje kvaliteta otisaka tampon štampe na plastičnim i metalnim podlogama, Zbornik radova Fakulteta tehničkih nauka, 2009, Vol. 24, No. 7, pp. 2322-2325, ISSN 0350-428X

Čemerikić K., Novaković D., Pavlović Ž.: Vizuelna analiza rasterskih polja na termalnim Ctp pločama bez konvencionalnog razvijanja, Zbornik radova Fakulteta tehničkih nauka, 2009, Vol. 24, No. 10, pp. 2965-2368, ISSN 0350-428X

Basarić J., Novaković D., Pavlović Ž.: Kontrola kvaliteta flekso štampe na aluminijumskim folijama, Zbornik radova Fakulteta tehničkih nauka, 2010, Vol. 25, No. 2, pp. 273-276, ISSN 0350-428X

Radić I., Novaković D., Pavlović Ž.: Uticaj sredstva za razvijanje na formiranje štampajućih i neštampajućih površina na termalnim CtP štamparskih formama, Zbornik radova Fakulteta tehničkih nauka, 2010, Vol. 25, No. 12, pp. 2560-2563, ISSN 0350-428X

Petković J., Novaković D., Pavlović Ž.: Određivanje adhezije boje u tampon štampi pomoću pull testa, Zbornik radova Fakulteta tehničkih nauka, 2010, Vol. 25, No. 13, pp. 2722-2725, ISSN 0350-428X

Pavlović Ž., Novaković D., Dedijer S., Pál (Apro) M.: Changes in the surface roughness of aluminium oxide (non-printing) areas on offset printing plate depending on number of imprints, Journal of Graphic Engineering and Design, 2010, Vol. 1, No. 1, pp. 32-38, ISSN 2217-379X, UDK: 655.3.022.3

Cigula T., Gojo M., Novaković D., Pavlović Ž.: Influence of various concentrates on quality of printing plates wetting process, Machine Design, 2010, pp. 325-330, ISSN 1821-1259

Pavlović Ž., Novaković D., Dedijer S., Pál (Apro) M.: Surface roughness of non-printing elements on CtP thermal offset plate after long print run, Machine Design, 2011, Vol. 3, No. 4, pp. 281-284, ISSN 1821-1259

Jakšić B., Novaković D., Pavlović Ž.: Kvalitet heat-set rotacione ofset štampe u zavisnosti od sredstva za vlaženje, Zbornik radova Fakulteta tehničkih nauka, 2011, Vol. 26, No. 2, pp. 293-296, ISSN 0350-428X

Mokuš G., Novaković D., Pavlović Ž.: Uticaj tiraža na habanje neštampajućih elemenata u ofset štampi, Zbornik radova Fakulteta tehničkih nauka, 2011, Vol. 26, No. 4, pp. 950-953, ISSN 0350-428X

Dedijer S., Novaković D., Pál (Apro) M., Pavlović Ž.: Statistical analysis of printing elements reproduction on thermally developed CTP flexo printing plates , Journal of Graphic Engineering and Design, 2012, Vol. 3, No. 2, pp. 12-22, ISSN 2217-379X, UDK: 655.2.225.3:519.2.248

Dedijer S., Novaković D., Gužvica M., Pavlović Ž., Pál (Apro) M.: Some properties of pad printed electro conductive elements, Scientific papers of the University of Pardubice, Faculty of Chemical Technology, Seria A, 2012, Vol. 17, No. Seria A, pp. 241-255, ISSN 1211-5541

Dedijer S., Pál (Apro) M., Pavlović Ž., Cigula T., Obrenović B.: Flexographic ink composition and its wetting influence on flexo printing plate and printed substrate (PE FOIL), Papíripar, 2012, Vol. 56, No. 4, pp. 24-30, ISSN 0031-1448

Marković M., Novaković D., Pavlović Ž.: Istraživanje uticaja parametara mašine na kvalitet aplikacije hologramske folije, Zbornik radova Fakulteta tehničkih nauka, 2012, Vol. 27, No. 2, pp. 305-308, ISSN 0350-428X

Milošević M., Novaković D., Pavlović Ž.: Analiza kvaliteta otiska za rotacionu „heat ‐ set“ ofset mašinu ipoređenje sa ISO 12647‐2 (2004), Zbornik radova Fakulteta tehničkih nauka, 2012, Vol. 27, No. 2, pp. 317-321, ISSN 0350-428X

Jovanov N., Pavlović Ž.: Analiza linijskih elemenatai tonskih vrednosti na digitalnim flekso štamparskim formama, Zbornik radova Fakulteta tehničkih nauka, 2014, Vol. 29, No. 8, pp. 1733-1736, ISSN 0350-428X

Prodić D., Pavlović Ž., Dedijer S.: Analiza kvaliteta otiska tampon štampe na različitim papirnim podlogama, Zbornik radova Fakulteta tehničkih nauka, 2014, Vol. 29, No. 10, pp. 2190-2193, ISSN 0350-428X

Šimunović V., Pavlović Ž.: Sistem za automatsku kontrolu štamparske forme za ofset štampu, Zbornik radova Fakulteta tehničkih nauka, 2014, Vol. 29, No. 7, pp. 1299-1302, ISSN 0350-428X

Pavić N., Pavlović Ž., Urbas R.: Mogućnost primene mikrokapsula u tehnici sito i ofset štampe, Zbornik radova Fakulteta tehničkih nauka, 2015, Vol. 30, No. 4, pp. 633-637, ISSN 0350-428X, UDK: 655

Šišović Lj., Pavlović Ž., Dedijer S.: Analiza reprodukcije rasterskih elemenata na konvencionalnim flekso štamparskim formama primenom različitih kopirnih predložaka, Zbornik radova Fakulteta tehničkih nauka, 2015, Vol. 30, No. 8, pp. 2657-2660, ISSN 0350-428X, UDK: 655

Bedov D., Pavlović Ž.: Računarska simulacija procesa izrade štamparske forme na sistemu Combi fi uređaju,, Zbornik radova Fakulteta tehničkih nauka, 2015, Vol. 30, No. 5, pp. 949-952, ISSN 0350-428X

Pavlović Ž., Dedijer S., Pál (Apro) M., Tomić I., Jurič (Rilovski) I.: Readability of screen printed QR codes depending on their dimension, encoded content and type of printing substrate using screen printing technique , Glasnik hemičara, tehnologa i ekologa Republike Srpske, 2016, Vol. 12, No. 1, pp. 37-45, ISSN 1840-054X, UDK: 54+66+502/504

Pál (Apro) M., Koltai L., Novaković D., Dedijer S., Pavlović Ž., Tomić I., Vasić J.: Preliminary analysis of crack perimeter and area ratio for an objective fold-crack assessment, Celuloza si Hartie, 2017, Vol. 66, No. 4, pp. 19-23, ISSN 1220-9848

Maričić K., Pavlović Ž.: Automatizacija radnih tokova u grafičkoj industriji, Zbornik radova Fakulteta tehničkih nauka, 2022, Vol. 37, No. 1, ISSN 0350-428X

30 30.00
M61
Predavanje po pozivu sa skupa nacionalnog značaja štampano u celini
Predavanje po pozivu sa skupa nacionalnog značaja štampano u celini
Novaković D., Karlović I., Pavlović Ž., Pešterac Č.: Savremeni trendovi u razvoju grafičkim tehnologijama , 3. Naučno - stručni simpozijum GRID, Novi Sad: Fakultet tehničkih nauka, 16-18 Novembar, 2006, pp. 7-14, ISBN 86-7892-009-2

1 1.50
M63
Saopštenje sa skupa nacionalnog značaja štampano u celini
Saopštenje sa skupa nacionalnog značaja štampano u celini
Pavlović Ž., Novaković D., Pešterac Č.: Značaj standardizacije i kontrole ofset štampe, 1. Naučno - stručni simpozijum GRID, Novi Sad: Fakultet tehničkih nauka, 1-3 Novembar, 2004, pp. 159-166

Nedeljković S., Pavlović Ž.: Jugoslovenska (srpska) latinica, 1. Naučno - stručni simpozijum GRID, Novi Sad: Fakultet tehničkih nauka, 1-3 Novembar, 2004, pp. 105-110

Novaković D., Pešterac Č., Kiurski J., Pavlović Ž., Karlović I.: Unapređenje procesa rukovanja grafičkim materijalom, 9. Međunarodni simpozijum iz oblasti celuloze, papira, ambalaže i grafike, Zlatibor: Tehnološko-metalurški fakultet Univeziteta u Beogradu, 17-20 Jun, 2003, pp. 104-111, ISBN 86-7401-173-X

Novaković D., Pešterac Č., Pavlović Ž., Karlović I.: Kontrola radnog procesa od računara do ploče, 10. Međunarodni simpozijum iz oblasti celuloze, papira, ambalaže i grafike, Zlatibor: Tehnološko-metalurški fakultet Univeziteta u Beogradu, 22-25 Jun, 2004, pp. 53-57, ISBN 86-7401-189-6

Pavlović Ž., Karlović I.: Vizuelno upoređivanje rasterskih tačaka na različitim CtP štamparskim formam, 2. Naučno - stručni simpozijum GRID, Novi Sad: Fakultet tehničkih nauka, 1-3 Novembar, 2004, pp. 67-72

Karlović I., Novaković D., Novotny E., Pavlović Ž.: Razlike u ostvarivom opsegu boja kod ofset štampe na papirnim podlogam, 2. Naučno - stručni simpozijum GRID, Novi Sad: Fakultet tehničkih nauka, 1-3 Novembar, 2004, pp. 35-42

Novaković D., Pešterac Č., Pavlović Ž., Karlović I.: Budućnost grafičkih tehnologija, 2. Naučno - stručni simpozijum GRID, Novi Sad: Fakultet tehničkih nauka, 1-3 Novembar, 2004, pp. 9-14

Novaković D., Pešterac Č., Karlović I., Pavlović Ž.: Denzitometrijska kontrolna kvaliteta otiska, 11. Međunarodni simpozijum iz oblasti celuloze, papira, ambalaže i grafike, Zlatibor: Tehnološko-metalurški fakultet Univerziteta u Beogradi, 21-24 Jun, 2005, pp. 47-51, ISBN 86-7401-218-3

Novaković D., Karlović I., Pavlović Ž., Pešterac Č.: Savremeni trendovi razvoja u grafičkim tehnologijama, 3. Naučno - stručni simpozijum GRID, Novi Sad: Fakultet tehničkih nauka, 16-18 Novembar, 2006, pp. 7-14, ISBN 86-7892-009-2

Dedijer S., Novaković D., Karlović I., Pavlović Ž.: Analiza termalnih CTP ofset ploča i otisaka, 3. Naučno - stručni simpozijum GRID, Novi Sad: Fakultet tehničkih nauka, 16-18 Novembar, 2006, pp. 159-168, ISBN 86-7892-009-2

Novaković D., Karlović I., Pavlović Ž., Pešterac Č.: Mogućnost primene refleksionih denzitometara u kalibraciji CTP osvetljivača , 3. Naučno - stručni simpozijum GRID, Novi Sad: Fakultet tehničkih nauka, 16-18 Novembar, 2006, pp. 149-158, ISBN 86-7892-009-2

Pavlović Ž., Savić G.: Projektovanje digitalne GRID_FTN merne kontrolne trake uz pomoć objektno orjentisanog programskog jezika , 3. Naučno - stručni simpozijum GRID, Novi Sad: Fakultet tehničkih nauka, 16-18 Novembar, 2006, pp. 183-188, ISBN 86-7892-009-2

Zorić V., Novaković D., Karlović I., Pavlović Ž.: Automatizacija štamparskog procesa , 3. Naučno - stručni simpozijum GRID, Novi Sad: Fakultet tehničkih nauka, 16-18 Novembar, 2006, pp. 61-68, ISBN ISBN 86-7892-009-2

Pejović B., Mićić V., Jotanović M., Tomić M., Novaković D., Karlović I., Pavlović Ž., Zeljković Ž.: Primena štamparskih formi bez konvencionalnog razvijanja, 4. Naučno - stručni simpozijum GRID, Novi Sad: Fakultet tehničkih nauka, 13-14 Novembar, 2008, pp. 65-72, ISBN 978-86-7892-145-2

Dedijer S., Novaković D., Pavlović Ž., Savković M.: Uticaj faktora izrade flekso štamparske forme na formiranje štampajućih elemenata različitih otnskih vrijednosti, 4. Naučno - stručni simpozijum GRID, Novi Sad: Fakultet tehničkih nauka, 13-14 Novembar, 2008, pp. 41-53, ISBN 978-86-7892-145-2

Adamović D., Kiurski J., Vojinović-Miloradov M., Turk Sekulić M., Pavlović Ž.: Detection of BTEX in printing plant, 2. PSU-UNS International Conference on Bioscience: Food, Agriculture and Environment, Novi Sad: University of Novi Sad, Serbia, 22-24 Jun, 2008, pp. 297-300, ISBN 978-86-499-0171-1

Novaković D., Karlović I., Pavlović Ž., Zeljković Ž.: Karakterizacija ravnih skenera u sistemima za urpavljanje bojom, 15. Međunarodni simpozijum iz oblasti celuloze, papira, ambalaže i grafike, Zlatibor: Tehnološki-metalurški fakultet Univerziteta u Beogradu, 23-25 Jun, 2009, pp. 101-107, ISBN 978-86-7401-259-8

Dedijer S., Novaković D., Pavlović Ž., Pál (Apro) M.: Uticaj uslova merenja i obrade podataka na merne rezultate hrapavosti štampajućih elemenata flekso štamparske forme, 16. Međunarodni simpozijum iz oblasti celuloze, papira, ambalaže i grafike, Zlatibor: Tehnološko-metalurški fakutlet Univerziteta u Beogradu, 15-18 Jun, 2010, pp. 133-140, ISBN 978-86-7401-267-3

Pavlović Ž., Cigula T., Mahović Poljaček S.: Uticaj tiraža na površinska svojstva slobodnih površina štamparske forme za ofset štampu, 16. Međunarodni simpozijum iz oblasti celuloze, papira, ambalaže i grafike, Zlatibor: Tehnološko-metalurški fakultet Univerziteta u Beogradu, 15-18 Jun, 2010, pp. 119-123, ISBN 978-86-7401-267-3

Pavlović Ž., Pál (Apro) M., Dedijer S., Novaković D.: Opseg boja u rotacionoj heat-set ofset štampi u zavisnosti od sastava sredstva za vlaženje, 17. International Symposium in the Field of Pulp, Paper, Packaging and Graphics, Zlatibor: Tehnološko-metalurški fakultet Univerziteta u Beogradu, 21-24 Jun, 2010, pp. 181-184, ISBN 978-86-7401-267-3

Pál (Apro) M., Sadžakov M., Pavlović Ž., Dedijer S.: Karakterizacija ofset štampe na recikliranim kartonima, 17. International Symposium in the Field of Pulp, Paper, Packaging and Graphics, Zlatibor: Tehnološko-metalurški fakultet Univerziteta u Beogradu, 21-24 Jun, 2010, pp. 177-180, ISBN 978-86-7401-267-3

Pál (Apro) M., Dedijer S., Pavlović Ž., Đerić A.: Analiza lepljenih spojeva transportnih kutija od talasastih lepenki, 18. Međunarodni simpozijum iz oblasti celuloze, papira, ambalaže i grafike, Zlatibor: Tehnološko-metalurški fakultet Univerziteta u Beogradu, 19-22 Jun, 2012, pp. 61-66, ISBN 978-86-7401-283-3

Dedijer S., Pavlović Ž., Pál (Apro) M., Samo V.: Analiza parametara kvalitata otiska rotacione ofset štampe u zavisnosti od tiraža, 18. Međunarodni simpozijum iz oblasti celuloze, papira, ambalaže i grafike, Zlatibor: Tehnološko - metalurški fakultet Univerziteta u Beogradu, 19-22 Jun, 2012, pp. 84-89, ISBN 978-86-7401-283-3

Dedijer S., Pál (Apro) M., Pavlović Ž., Novaković D.: Čitljivost 2D bar kodova štampanih na različitim papirnim podlogama, 10. Conference of Chemists, Technologists and Environmentalists of Republic of Srpska, Banja Luka: Univerzitet u Banjoj Luci, Tehnološki fakultet, 15-16 Novembar, 2013, pp. 501-512, ISBN 978-99938-54-50-0

Đokić M., Pavlović Ž., Kavčič U., Kavičić U., Dedijer S., Muck T., Tadeja M.: Uticaj procesa sušenja na otpornost RFID komponenti štampanih funkcionalnom provodnom bojom, 10. Conference of Chemists, Technologists and Environmentalists of Republic of Srpska, Banja Luka: Univerzitet u Banjoj Luci, Tehnološki fakultet, 15-16 Novembar, 2013, pp. 501-512, ISBN 978-99938-54-50-0

Prica M., Adamović (Majkić) S., Novaković D., Pavlović Ž., Kašiković N., Dedijer S., Adamović D.: Mogućnost smanjenja otpada u grafičkoj industriji, 10. Otpadne vode, komunalni čvrsti otpad i opasan otpad, Zlatibor, 1-3 April, 2014, pp. 117-121, ISBN 978-86-82931-61-4

Prica M., Adamović (Majkić) S., Radonić (Jakšić) J., Turk Sekulić M., Pavlović Ž., Adamović D., Kašiković N.: Procena uticaja cinka iz otpadnih polimernih flekso štampanih grafičkih materijala na životnu sredinu nakon njihove dispozicije, 8. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Faculty of Technical Sciences, Department of Production Engineering, Novi Sad, 19-20 Jun, 2014, pp. 175-178, ISBN 978-86-7892-616-7

Adamović (Majkić) S., Prica M., Velimirović M., Pavlović Ž., Tričković J., Maletić S.: Solidifikaciono/stabilizacioni tretman otpadnih procesnih ofset boja, 10. International Scientific Conference ETIKUM, Novi Sad: Faculty of Technical Sciences, Department of Production Engineering, Novi Sad, 23-25 Jun, 2016, pp. 141-144, ISBN 978-86-7892-825-3

Milošević R., Kašiković N., Pavlović Ž., Stankovič Elesini U., Urbas R.: MICROCAPSULES PROPERTIES AND THEIR APPLICATION USING DIFFERENT PRINTING TECHNIQUES, 11. Savjetovanje hemičara i tehnologija Republike Srpske, Teslić: University of Banjaluka, Faculty of Technology, 18-19 Novembar, 2016, pp. 547-554

Tomić I., Dedijer S., Pál (Apro) M., Vladić G., Pavlović Ž.: Procena razlike u opsegu boja u zavisnosti od načina mapiranja u ofset tehnici štampe , 11. Conference of Chemists, Technologists and Environmentalists of Republic of Srpska, Teslić: University of Banjaluka, Faculty of Technology, 18-19 Novembar, 2016, pp. 529-538, ISBN 978-99938-54-67-8

Gvoić V., Prica M., Kerkez Đ., Bečelić-Tomin M., Tomašević Pilipović D., Leovac Maćerak A., Pavlović Ž., Rapajić S.: Tretman vodenog rastvora cijan flekso grafičke boje primenom nano nula valentnog gvožđa, 11. Naučna konferencija sa međunarodnim učešćem (ETIKUM), Novi Sad: Univerzitet u Novom Sadu, Fakultet tehničkih nauka, Departman za proizvodno mašinstvo, 6-8 Decembar, 2017, pp. 181-184, ISBN 978-86-6022-00-68

Vladić G., Kašiković N., Novaković D., Bošnjaković G., Pavlović Ž.: UPOTREBA TEHNOLOGIJE PRAĆENJA POGLEDA ZA PROCENU MODNOG REVIJALNOG OGLASA, 6. Šesti naučno stručni skup sa međunarodnim učešćem – DTM 2018 -Tendecije razvoja u tekstilnoj industiji Dizajn, tehnologija i menadžment, Beograd: Union of engineers and technicians of Serbia, 27 Jun, 2016, pp. 180-184, ISBN 978-86-87017-42-9

Vladić G., Kašiković N., Bošnjaković G., Dedijer S., Pavlović Ž.: DIZAJN AMBALAŽE ZA PROIZVODE TEKSTILNE INDUSTRIJE, 2. Naučna konferencija sa međunarodnim učešćem: Savremeni trendovi I inovacije u tekstilnoj industriji, Beograd: Union of Engineers and Textile Technicians of Serbia, 16-17 Maj, 2019, pp. 288-295

Vladić G., Kašiković N., Pinćjer I., Pavlović Ž., Bošnjaković G.: Laser technology in textile manufacturing, 4. International Scientific Conference Contemporary Trends and Innovations in the Textile Industry, Beograd: Union of Engineers and Textile Technicians of Serbia, 16-17 Septembar, 2021, pp. 316-322, ISBN 978-86- 900426-3-0

34 17.00
M64
Saopštenje sa skupa nacionalnog značaja štampano u izvodu
Saopštenje sa skupa nacionalnog značaja štampano u izvodu
Pavlović Ž., Novaković D., Gojo M.: Površinska hrapavost slobodnih površina ofset termalne CTP tiskovne forme, 10. Digitalni sustavi u tiskarstvu, Stubičke toplice: Centar za grafičko inženjerstvo akademije tehničkih znanosti Hrvatske, Grafički fakulete sveučilišta u Zagrebu, 25-27 Februar, 2010, pp. 28-28, ISBN 978-953-7064-14-3

Pál (Apro) M., Novaković D., Dedijer S., Pavlović Ž., Kašiković N.: Preliminary Analysis of Image Segmentation Algorithms for an Objective Fold Cracking Evaluation, 15. International Conference on Printing, Design and Graphic Communications - Blaž Baromić, Senj: Croatian Society of Graphic Artists, Croatia, 16-19 Septembar, 2015, pp. 34-34

Pál (Apro) M., Dedijer S., Kašiković N., Pavlović Ž., Vladić G.: Pregled računarski potpomognutih vizuelnih metoda za procenu otpornosti premaznih papira prema površinskom oštećenju, 14. Tiskarstvo i Diyajn 2015, Zagreb: Akademija Tehničkih Znanosti Hrvatske Centar za grafičko inženjerstvo, 27-28 Mart, 2015, pp. 24-24

3 0.60
M71
Odbranjena doktorska disertacija
Odbranjena doktorska disertacija
Pavlović Ž.: Karakterizacija površinske strukture neštampajućih elemenata CtP termalne štamparske forme za ofset štampu, Novi Sad, 2012

1 6.00
M72
Odbranjen magistarski rad
Odbranjen magistarski rad
Pavlović Ž.: Savremeni pristup razvoju merno kontrolnih traka za procesnu grafičku kontrolu, Magistarska teza , Novi Sad, Fakultet tehničkih nauka, 2007

1 3.00
M85
Prototip, nova metoda, softver, standardizovan ili atestiran instrument,
Prototip, nova metoda, softver, standardizovan ili atestiran instrument,
Novaković D., Pavlović Ž., Pavlović Ž., Zeljković Ž., Nedeljković U., Dedijer S., Kašiković N., Vladić G., Pál (Apro) M., Avramović D., Pinćjer I., Milić N., Tomić I., Jurič (Rilovski) I., Đurđević S.: Softverski model za unapređenje znanja i proizvodnje u grafičkoj industriji, Tehničko rešenje, 2015

1 2.00

Korisnički servis