Univerzitet u Novom Sadu i Pokrajinski sekretarijat za visoko obrazovanje i naučnoistraživačku delatnost

Karton naučnog radnika

Prezime: Maksimović

Ime: Rado

APVNT broj: 234

Organizacija: Fakultet tehničkih nauka u Novom Sadu

Produkcija - zbirni rezultati
Oznaka Naziv kriterijuma produkcije Broj Poena
202 389.50
M14
Monografska studija/poglavlje u knjizi M12 ili rad u tematskom zborniku međunarodnog značaja
Monografska studija/poglavlje u knjizi M12 ili rad u tematskom zborniku međunarodnog značaja
Zelenović D., Ćosić I., Maksimović R.: Design/reengineering of production systems, Group Technology and Cellular Manufacturing: State University of New York Buffalo, NY, USA, Kluwer Academic Publishers, A.C.I.P. Printed in the USA, 1998, str. 517-534

Rajić M., Banić M., Maksimović R., Mančić M., Milosavljević P.: Energy and Utility Management Maturity Model for Sustainable Industry, In Rackov, M., Mitrović, R., Čavić, M. (eds) Machine and Industrial Design in Mechanical Engineering. KOD 2021, Mechanisms and Machine Science book series, Cham, Springer Nature Switzerland AG, 2022, str. 353-361, ISBN 978-3-030-88465-9

Rajić M., Maksimović R., Milosavljević P., Pavlović D.: Energy Flow Model in Industrial Environment, in Industrial Environment. In: Lalic, B., Gracanin, D., Tasic, N., Simeunović, N. (eds) Proceedings on 18th International Conference on Industrial Systems – IS’20. IS 2020. Lecture Notes on Multidisciplinary Industrial Engineering, Cham, Springer Nature Switzerland AG, 2022, str. 377-384, ISBN 978-3-030-97947-8

3 9.00
M21
Rad u vodećem međunarodnom časopisu kategorije M21
Rad u vodećem međunarodnom časopisu kategorije M21
Maksimović R.: Energy Management Model for Sustainable Development in Hotels within WB6, Sustainability, 2022, Vol. 14, No. (24)16787, pp. 1-19, ISSN 2071-1050

Rajić M., Maksimović R., Milosavljević P.: Emergency Planning and Disaster Recovery Management Model in Hospitality—Plan-Do-Check-Act Cycle Approach, Sustainability, 2023, Vol. 15, No. 15, 6303, pp. 1-18, ISSN 2071-1050

2 16.00
M21a
Rad u vodećem međunarodnom časopisu kategorije M21a
Rad u vodećem međunarodnom časopisu kategorije M21a
Ostojić G., Stankovski S., Ratković Ž., Miladinović Lj., Maksimović R.: Development of Hydro Potential in Republic Srpska (doi: 10.1016/j.rser.2013.07.036), Renewable and Sustainable Energy Reviews, 2013, Vol. 28, No. Dec, pp. 196-203, ISSN 1364-0321

1 12.00
M22
Rad u međunarodnom časopisu kategorije M22
Rad u međunarodnom časopisu kategorije M22
Maksimović R., Stankovski S., Ostojić G., Petrović S., Ratković Ž.: Complexity and Flexibility of Production Structures, Journal of Scientific and Industrial Research, 2010, Vol. 69, No. 2, pp. 101-105, ISSN 0022-4456

Marković V., Maksimović R.: A Contribution to Software Service Improvement based on LSP Method, African Journal of Business Management, 2010, Vol. 4, No. 15, pp. 3277-3288, ISSN 1993-8233

Njegomir V., Maksimović R.: The overview of some basic issues in insurance matket - the case of Serbian insurance risk transfer market, Transformations in Business & Economics, 2012, Vol. 11, No. 2(26), pp. 51-69, ISSN 1648-4460

Njegomir V., Maksimović R.: The overview of some basic issues in insurance market – the case of Serbian insurance risk transfer market, Transformations in Business & Economics, 2012, ISSN 1648-4460

Radišić O., Radišić M., Maksimović R., Radaković N.: Industrial Cogeneration Appliance - An Example of Drilling Rig, Journal of Canadian Petroleum Technology, 2012, Vol. 51, No. 6, pp. 487-492, ISSN 0021-9487

Delić M., Radlovački V., Kamberović B., Maksimović R., Pečujlija M.: Examining relationships between quality management and organisational performance in transitional economies, Total Quality Management & Business Excellence, 2014, Vol. 25, No. 3-4, pp. 367-382, ISSN 1478-3363

Todić V., Ćosić I., Maksimović R., Tasić N., Radaković N.: Model for simulation of life cycle costs at the stage of product development, International Journal of Simulation Modelling, 2017, Vol. 16, No. 1, pp. 108-120, ISSN 1726-4529, UDK: 10.2507/IJSIMM16(1)9.373

Banjac N., Maksimović R., Dragaš K., Ivetić J.: Monitoring and Assessment of Protected Areas’ Management Capacities in the Republic of Serbia, Sustainability, 2019, Vol. 11, No. 3(666), pp. 1-17, ISSN 2071-1050

Rajić M., Maksimović R., Milosavljevic P., Pavlović D.: Energy Management System Application for Sustainable Development in Wood Industry Enterprises, Sustainability, 2020, Vol. 12, No. 1(76), pp. 1-16, ISSN 2071-1050

Žeželj B., Maksimović R., Todorović T., Đatkov Đ.: Analysis of the Possibilities for Using Renewable Energy Sources in the Autonomous Province of Vojvodina, Sustainability, 2020, Vol. 12, No. 14, pp. 1-17, ISSN 2071-1050

Amović G., Maksimović R., Bunčić S.: Critical Success Factors for Sustainable Public-Private Partnership (PPP) in Transition Conditions: An Empirical Study in Bosnia and Herzegovina, Sustainability, 2020, Vol. 12, No. 17, pp. 1-29, ISSN 2071-1050

Rajić M., Miroslav M., Dragan A., Maksimović R., Peđa M., Dragan P.: Analyzing energy poverty using intelligent approach, Energy and Environment, 2020, Vol. 31, No. 8, pp. 1448-1472, ISSN 0958-305X

Maksimović R.: Business Process Reengineering with a Circular Economy PDCA Model from the Perspective of Manufacturing Industry, Processes, 2024, Vol. 12, No. 887, pp. 1-27, ISSN 2227-9717

13 67.00
M23
Rad u međunarodnom časopisu kategorije M23
Rad u međunarodnom časopisu kategorije M23
Maksimović R., Lalić B.: Flexibility and Complexity of Effective Enterprises, Strojniski vestnik - Journal of Mechanical Engineering, 2008, Vol. 54, No. 11, pp. 768-782, ISSN 0039-2480, UDK: 658.51

Đurić Ž., Maksimović R., Adamović Ž.: Key performance indicators in a Joint-Stock Company, African Journal of Business Management, 2010, Vol. 4, No. 6, pp. 890-902, ISSN 1993-8233

Marović B., Njegomir V., Maksimović R.: The implications of the financial crisis to the insurance industry - Global and regional perspective, Ekonomska istraživanja - Economic Research, 2010, Vol. 23, No. 2, pp. 127-141, ISSN 1331-677X, UDK: 336.7:368; 338.124.2:368

Obadović M., Maksimović R., Obadović M.: The estimate of the market risk by the application of historical simulation method in the period of growth of stock exchange indices on Belgrade stock exchange, Ekonomska istraživanja - Economic Research, 2010, Vol. 23, No. 3, pp. 82-95, ISSN 1331-677X, UDK: UDK 330.322:336.76

Njegomir V., Marović B., Maksimović R.: The implications of the financial crisis to the insurance industry – global and regional perspecitve, Ekonomska istraživanja - Economic Research, 2010, Vol. 23, No. 2, pp. 127-142, ISSN 1331-677X

Borocki J., Ćosić I., Lalić B., Maksimović R.: Analysis of Company Development Factors in Manufacturing and Service Company: a Strategic Approach, Strojniski vestnik - Journal of Mechanical Engineering, 2011, Vol. 57, No. 1, pp. 55-68, ISSN 0039-2480, UDK: DOI:10.5545/sv-jme.2010.030

Maksimović R.: Relationship between Complexity and Flexibility of Production Structures, Strojarstvo, 2012, Vol. 54, No. 5, pp. 351-369, ISSN 0562-1887

Miškić M., Maksimović R.: Analysis of insurance sector with special review on bankaassurance, Tehnics Tehnologies Education Management / TTEM, 2012, Vol. 7, No. 2, pp. 513-524, ISSN 1840-1503

Miškić M., Maksimović R.: Analysis of insurance sector with special review on bankassurance, Tehnics Tehnologies Education Management / TTEM, 2012, Vol. 7, No. 2, 5/6, pp. 513-524, ISSN 1840-1503

Josimović Lj., Đurić Ž., Adamović Ž., Maksimović R.: Development of a model for optimization of the process of technical diagnostics of the turbogenerators, Tehnics Tehnologies Education Management / TTEM, 2012, Vol. 7, No. 4, pp. 1530-1541, ISSN 1840-1503

Marković V., Maksimović R.: A contribution to continual software service improvement based on the six-step service improvement method, International Journal of Software Engineering and Knowledge Engineering, 2012, Vol. 22, No. 4, pp. 549-569, ISSN 0218-1940

Tasić N., Đurić Ž., Malešević D., Maksimović R., Radaković N.: Automation of Process Performance Management in a Company, Tehnički vjesnik - Technical Gazette, 2018, Vol. 25, No. 2, pp. 565-572, ISSN 1330-3651, UDK: 10.17559/TV-20151010074417

Bajatović D., Anđelković A., Ćosić I., Maksimović R.: Application of Predictive Models for Natural Gas Needs - Reviewing the Current State and Future Trends, Tehnički vjesnik - Technical Gazette, 2020, Vol. 27, No. 2(2020), pp. 648-655, ISSN 1330-3651

Tosanić M., Miladinović D., Maksimović R., Vidicki P.: Energy Performance Indicators in a Large Electrical Company, Transactions of Famena, 2025, Vol. 49, No. 3, pp. 49-60, ISSN 1333-1124

14 46.00
M24
Rad u vodećem nacionalnom časopisu kategorije M24
Rad u vodećem nacionalnom časopisu kategorije M24
Njegomir V., Maksimović R.: RISK TRANSFER SOLUTIONS FOR THE INSURANCE INDUSTRY , Economic Annals, 2009, Vol. 54, No. 180, pp. 57-90, ISSN 0013-3264, UDK: 3.33

Njegomir V., Marović B., Maksimović R.: THE FINANCIAL CRISIS AND THE INSURANCE INDUSTRY: THE EVIDENCE FROM THE EX-YUGOSLAVIA REGION, Ekonomski anali, 2010, Vol. 55, No. 185, pp. 129-162, ISSN 0013-3264, UDK: 3.33

2 6.00
M31
Plenarno ili uvodno predavanje po pozivu sa međunarodnog skupa štampano u celini (neophodno pozivno pismo i program)
Plenarno ili uvodno predavanje po pozivu sa međunarodnog skupa štampano u celini (neophodno pozivno pismo i program)
Maksimović R.: Access to Measuring and Balancing of Enterprise's Key Performance Indicators, 5. International Conference Mechanical Engineering in XXI Century - MASING, Niš: University of Nis, Faculty of Mechanical engineering in Nis, 9 December, 2020, pp. 27-36, ISBN 978-86-6055-139-1

1 3.50
M33
Saopštenje sa međunarodnog skupa štampano u celini
Saopštenje sa međunarodnog skupa štampano u celini
Zelenović D., Radaković N., Maksimović R.: AN APPROACH TO DESIGN OF EFFECTIVE MATERIAL FLOW IN INDUSTRIAL SYSTEMS Naziv skupa: SYPRO'87 , 1. SYPRO, Varšava: Politechnc, Warsaw, 1 January, 1990, pp. 270-282

Zelenović D., Ćosić I., Maksimović R., Šešlija D.: Contribution to the development of robotic assembly in group flows, 4. Yugoslav - Soviet Symposium on Applied Robotics and Flexible Automation, Novi Sad, 23-25 May, 1988, pp. 31-40

Zelenović D., Šešlija D., Ćosić I., Maksimović R.: On the flexibility of robotic assembly, 10. ICPR, Nottingham, 1 August, 1989, pp. 552-553

Zelenović D., Ćosić I., Maksimović R.: Ein beitrag zur forschung des komplexitatsgrades einen produktions-struktur, 1. SYPRO, Varšava, 1 January, 1990

Maksimović R.: PRILOG AUTOMATIZACIJI POSTUPKA OBLIKOVANJA PROSTORNIH STRUKTURA PROIZVODNIH SISTEMA , 9. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Fakultet tehničkih nauka, 28-29 June, 1993, pp. 1-1

Zelenović D., Ćosić I., Maksimović R.: PRIMENA GRUPNE TEHNOLOGIJE U INDUSTRIJSKIM PROIZVODNIM SISTEMIMA, 5. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Fakultet tehničkih nauka, 8-9 June, 1994, pp. 795-802

Zelenović D., Ćosić I., Maksimović R., Maksimović A.: DEVELOPMENT OF PRODUCTION STRUCTURES WITH A ABILITY OF MAINTAINING OF SEPARATE EXISTANCE, 1. International Conference on Technical Informatics ConTI, Temišvar: The Romanian Society for Control and Technical Informatics, 16-19 November, 1994, pp. 9-14

Maksimović R., Radaković N., Dakić R.: DEVELOPMENT OF SOFTWARE SYSTEM FOR DESIGNING LAY-OUT OF PRODUCTION SYSTEMS, 1. International Conference on Technical Informatics ConTI, Temišvar: Romanian Society for Control and Technical Informatics, 16-19 November, 1994, pp. 28-33

Zelenović D., Ćosić I., Maksimović R., Maksimović A.: Development of Production Structures with Ability of Maintaining of Separate Existance, 1. Internacional Conference on Technical lnformatitcs, Temišvar, 16-19 November, 1994

Maksimović R., Dakić R., Radaković N.: Razvoj programskog sistema za projektovanje prostornih struktura proizvodnih sistema, 25. Savetovanje proizvodnog mašinstva Jugoslavije sa međunarodnim učešćem, Beograd: Mašinski fakultet Univerziteta u Beogradu, 1-2 September, 1994, pp. 639-644

Zelenović D., Burbidge J., Ćosić I., Maksimović R.: THE DIVISION OF LARGE COMPLEX PRODUCTION SYSTEMS, INTO INDEPENDENT, AUTONOMOUS UNITS , 13. International Conference on Production Research - ICPR, Jerusalem: Freund Publishing House, Ltd, 1 August, 1995, pp. 213-215

Maksimović R.: A CONTRIBUTION TO INVESTIGATION OF CONDITION FOR CHOICE OF OPTIMAL VARIANT OF INDUSTRIAL SYSTEM'S STRUCTURE, 10. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Faculty of Technical Sciences, 1-3 October, 1996, pp. 51-58, UDK: 658.5

Cvijić M., Maksimović R.: DEVELOPMENT OF CRITERIA FOR THE FORMATION OF WORKING UNITS OF INDEPEDENCE WORKING EXISTENCE WITHIN INDUSTRIAL SYSTEMS, 10. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, 1-3 October, 1996, pp. 59-63, UDK: 658.5

***Stanivuković D., Maksimović R., Borocki J.: SOME DIRECTIONS OF EDUCATION AND TRAINING FOR QUALITY IN THE FUTURE Naziv skupa: First International JOSQ Congress - The Road toTQM - Nije povezan skup**greska**

Zelenović D., Ćosić I., Maksimović R.: A CONTRIBUTION TO THE DEVELOPMENT OF PRODUCTION STRUCTURES ON THE BASIS OF ABILITY OF MAINTAINING OF SEPARATE EXISTENCE , 14. International Conference on Production Research - ICPR, Osaka, 4-8 August, 1997, pp. 59-62

***Kamberović B., Maksimović R.: UNAPREĐENjE KVALITETA - VIZA ZA TRŽIŠTA III MILENIJUMA Naziv skupa: II međunarodni kongres YASQ, Beograd, maj 1998.- Nije povezan skup**greska** , UDK: 658.5

Maksimović R., Radaković N., Dakić R.: Development of Software System for Designing Layout of Production Systems, 13. International Conference on Material Handling and Warehousing, Beograd: Mašinski fakultet Univerziteta u Beogradu , 5-7 December, 1994, pp. 212-216, ISBN 86-7083-334-4

***Zelenović D., Maksimović R., Ćosić I.: FLEXIBILITY OF EFFECTIVE ENTERPRISE Naziv skupa: Special ICPR'2000 - International Conference of Production research - FACING OF CHALENGES IN THE NEW MILLENNIUM - Nije povezan skup**greska**

Maksimović R.: THE IIS - APPROACH TO THE CONTROL OF WORK PROCESSES IN INDUSTRIAL SYSTEMS, 12. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Vrnjačka Banja: University of Novi Sad, Faculty of Technical Sciences, 22-23 November, 2002, pp. 498-503, UDK: 658.5

Božičković R., Ćosić I., Maksimović R.: TOOLS FOR ORGANISING LEAN MANUFACTURING SYSTEMS , 6. Međunarodni naučno-stručni skup o dostignućima elektrotehnike, mašinstva i informatike - DEMI, Banja Luka: University of Banja Luka, Faculty of Technical Sciences, 30-31 May, 2003, pp. 263-268

Božičković R., Sorak M., Maksimović R.: CREATING OF LEAN LEADERS , 6. Međunarodni naučno-stručni skup o dostignućima elektrotehnike, mašinstva i informatike - DEMI, Banja Luka: University of Banja Luka, Faculty of Technical Sciences, 30-31 May, 2003, pp. 301-306

Stefanović D., Maksimović R., Ćosić I.: ONE SOLUTION TO DATA PROTECTION STRATEGY IN A NETWORK ENVIRONMENT , 9. JISA kongres, Herceg Novi: JISA, 13-19 June, 2004, pp. 14-19

Maksimović R., Ćosić I., Kovačević I., Katić V., Hodolič J.: SISTEM UPRAVLJANJA KVALITETOM U OBRAZOVNIM INSTITUCIJAMA , 1. International Convention on Quality, Beograd: JOSQ - Yugoslav Organization for Standards and Quality, 30-2 May, 2005

Maksimović R.: ACTUAL TRENDS IN PRODUCTION SYSTEMS DEVELOPMENT , 13. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Herceg Novi: University of Novi Sad, Faculty of Technical Sciences, 7-9 September, 2005, pp. 37-44, ISBN 86-7780-008-5, UDK: 658.5(082)

Tešić Z., Maksimović R.: INTEGRATED PRODUCTION CONTROL IN MANUFACTURING COMPANY , 13. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Herceg Novi: University of Novi Sad, Faculty of Technical Sciences, 7-9 September, 2005, pp. 115-120, ISBN 86-7780-008-5, UDK: 658.5(082)

Morača S., Maksimović R.: HOLISTIC, MANAGEMENT, AND CHANGES IN ORGANIZATION, 13. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Herceg Novi: University of Novi Sad, Faculty of Technical Sciences, 7-9 September, 2005, pp. 835-841, ISBN 86-7780-008-5, UDK: 658.5(082)

Tešić Z., Maksimović R.: Integrisano upravljanje procesima rada u preduzeću, 13. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Herceg Novi: Fakultet tehničkih nauka, 7-9 September, 2005, pp. 115-120, ISBN 86-7780-008-5, UDK: 658.5

Maksimović R., Babić M.: APPLIANCE OF STSTISTICAL METHODS IN A MARKETING RESEARCH , YUSQ ICQ 2006 – International Journal «Total Quality Menagement & Excellence», 2006, Vol. 34, No. 1-2, pp. 125-129, 9. International Conference DEPENDABILITY AND QUALITY MANAGEMENT ICDQM, Beograd, 13-15 June, 2006, pp. 125-129, ISBN 1452-0680, UDK: 658.5

Tešić Z., Maksimović R., Radaković N.: Razvoj modela integrisanih poslovnih procesa u preduzeću, 10. International Symposium SymOrg, Zlatibor: Fakultet organizacionih nauka, 7-10 June, 2006, pp. 158-161, ISBN 86-7680-086-3

Maksimović R., Radaković N., Tešić Z.: Prilaz unapređenju kvaliteta procesa u organizaciji (osvrt na "Six Sigma metodologiju) , YUSQ ICQ 2006 – International Journal «Total Quality Menagement & Excellence», 2006, Vol. 34, No. 1-2, pp. 121-124, 9. International Conference DEPENDABILITY AND QUALITY MANAGEMENT ICDQM, Beograd, 13-15 June, 2006, pp. 121-124, ISBN 1452-0680, UDK: 658.5

Mitrović V., Maksimović R., Tešić Z.: APPLIANCE OF "BALANCED SCORECARD" METODOLOGY IN ENTERPRISE, 11. International Conference DEPENDABILITY AND QUALITY MANAGEMENT ICDQM, Beograd: YUSQ - Quality and Standardization Association of Serbia, 18-19 June, 2008, pp. 339-346, ISBN 1452-0680, UDK: 658.5

Maksimović R., Babić M.: AN EXAMPLE OF PRODDUCT INOVATION POTENTIAL ANALYSIS , 11. International Conference DEPENDABILITY AND QUALITY MANAGEMENT ICDQM, Beograd: YUSQ - Quality and Standardization Association of Serbia, 18-19 June, 2008, pp. 327-330, ISBN 1452-0680, UDK: 658.5

Maksimović R., Stankovski S., Mitrović V.: APPLIANCE OF "BALANCED SCORECARD" METODOLOGY IN SMALL ENTERPRISE, 7. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: INFOTEH, 26-28 March, 2008, pp. 280-284, ISBN 99938-624-2-8

Poli M., Maksimović R., Lalić B.: PROJECT STRATEGY: DETERMINING THE BEST ORGANIZATIONAL STRUCTURE FOR A PROJECT, 14. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, 2-3 October, 2008, pp. 403-408, ISBN 978-86-7892-135-3, UDK: 658.5(082)

Renovica R., Maksimović R.: APPLICATION OF THE BALANCED SCORECARD METHODOLOGY IN A INSURANCE COMPANY, 14. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, 2-3 October, 2008, pp. 619-628, ISBN 978-86-7892-135-3, UDK: 658.5(082)

Miškić M., Maksimović R.: Insurance and corporate management in Serbia and BiH, 14. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, Department for Industrial Engineering and Management, 2-3 October, 2008, pp. 629-635, ISBN 978-86-7892-135-3

Đurić Ž., Maksimović R.: ESTABLISHING THE QUALITY MANAGEMENT SYSTEM IN THE COMPANY WITH COMPLEX ACTIVITY , 14. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, 2-3 October, 2008, pp. 321-330, ISBN 978-86-7892-135-3, UDK: 658.5(082)

Borocki J., Maksimović R.: Strategic planning in a function of organizational innovativeness , 14. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, 2-3 October, 2008, pp. 415-420, ISBN 978-86-7892-135-3, UDK: 658.5(082)

Poli M., Mithiborwala H., Maksimović R., Lalić B.: PROJECT STRATEGY: SELECTING THE BEST PROJECT STRUCTURE, 9. PICMET Conference, Portland: Portland International Center for Management of Engineering and Technology, 2-6 August, 2009, pp. 1276-1281, ISBN 978-1-890843-20/5

Kranjac M., Maksimović R., Sikimic U.: Еu funds use to overcome economic crisis and to integrate into the EU (the case of Serbia), 1. Global Business Conference, Dubrovnik: Innovation Institute, 13-16 October, 2010

Kranjac M., Maksimović R., Sikimic U.: Pre-accession financial assistance of the EU as globalization tool for prospective members of the European Union, 1. International Conference "Globalization and Higher Education in Economics and Business Administration" - GEBA, Iasi: Alexandru Ioan Cuza Universityof Iasi, Faculty of Economics and Business Administration, Iasi, Romania, 21-23 October, 2010, pp. 471-475

Kranjac M., Maksimović R., Sikimic U.: The Economic Crisis as a Tool for Integration into the EU: the case of Serbia, 1. International Conference "The Economic Crisis and the Process of European Integration", Brussels: University of Antwerp, Free University of Brussels (VUB), Institute for European Studies (IES) , 2 June, 2010, pp. 1-24

Vidicki P., Vrgović P., Maksimović R.: Measuring innovation in higher education institutions, 15. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Fakultet tehničkih nauka, 14-16 September, 2011, pp. 442-446, ISBN 978-86-7892-341-8, UDK: 658.5(082)

Zečević I., Maksimović R., Lazarević M., Đukić N., Tegeltija S.: Response optimization of RFID system database, 15. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: University of Novi Sad - Faculty of Technical Sciences, Department of Industrial Engineering and Management, 14-16 September, 2011, pp. 205-210, ISBN 978-86-7892-341-8

Đurić Ž., Maksimović R.: Methodology of the process improvement in the industrial company based on performance measurement, 1. International Convention on Quality - ICQ, Beograd: YUSQ - Quality and Standardization Association of Serbia, 6-9 June, 2011, pp. 13-18, ISBN 978–86–903197–6–3, UDK: 658.5

Đurić Ž., Maksimović R.: Measuring and Analysis of the Key Performance Indicators in an Industrial Enterprise Applying Information System, 11. Balkan Conference on Operational Research - BALCOR, Zlatibor: University of Belgrade, Faculty of Organizational Sciences, 7-11 September, 2013, pp. 69-78, ISBN 978-86-7680-285-2, UDK: 519.8(082); COBISS.SR-ID 201618956

Tasić N., Delić M., Maksimović R., Lalić B., Ćukušić M.: Selecting Key Performance Indicators in Universities – Academic perspective, 17. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, Department of Industrial Engineering and Engineering Management, 4-6 October, 2017, pp. 518-521, ISBN 978-86-7892-978-6

Milosavljevic P., Rajic M., Pavlovic D., Maksimović R., Ferenčak M., Leber M.: Material and Energy Flow in Industrial Environment, 3. International Conference Mechanical Engineering in XXI Century - MASING, Niš: Faculty of Mechanical Engineering in Niš, 17-18 September, 2015, pp. 523-526, ISBN 978-86-6055-103-2, UDK: 621(082); 681.5(082); 007.52(082)

Tasić N., Delić M., Maksimović R., Lalić B., Bogojević B., Ćukušić M.: University Key Performance Indicators – Students perspective, 9. International Scientific and Expert Conference TEAM, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, Department for Industrial Engineering and Management, 10-12 October, 2018, pp. 422-428, ISBN 978-86-6022-098-3

Rajić M., Milosavljević P., Maksimović R., Pavlović D.: Implementation of Energy Management Standardization in Industrial Systems, 14. International Conference on Systems, Automatic Control and Measurements SAUM, Niš, 14-16 November, 2018, pp. 244-247, ISBN 978-86-6125-205-1

Maksimović R.: Material and Energy Flow in Industrial Environment, 4. International Conference Mechanical Engineering in XXI Century - MASING, Niš: Faculty of Mechanical Engineering in Niš, 19-20 April, 2018, pp. 523-526, ISBN 978-86-6055-103-2, 5, UDK: 621(082); 681.5(082); 007.52(082)

Maksimović R.: Material and Energy Flow in Industrial Environment, 4. International Conference Mechanical Engineering in XXI Century - MASING, Niš, 19-20 April, 2018, pp. 523-526, ISBN 978-86-6055-103-2, UDK: 621(082); 681.5(082); 007.52(082)

Rajić M., Milosavljević P., Maksimović R., Pavlović D.: Energy Management Model for Sustainable Production Process – A Case Study, 5. International Conference Mechanical Engineering in XXI Century - MASING, Niš: University of Niš, Faculty of Mechanical Engineering, 9 December, 2020, pp. 425-428, ISBN 978-86-6055-139-1

Rajić M., Maksimović R., Milosavljević P., Pavlović D.: Energy Management System Application in Healthcare, 15. International Conference on Accomplishments in Mechanical and Industrial Engineering - DEMI, Banja Luka: University of Banja Luka, Faculty of Mechanical Engineering, 28-29 May, 2021, pp. 389-398, ISBN 978-99938-39-92-7, UDK: 621(082)(0.034.2)

Rajić M., Maksimović R., Milosavljević P., Pavlović D.: Maturity Model for Energy Management System: Case Study, 15. International Conference on Systems, Automatic Control and Measurements SAUM, Niš: University of Nis, Faculty of Mechanical engineering in Nis, 9-10 September, 2021, pp. 165-168, ISBN 978-86-6125-243-3, UDK: 681.5(082)(0.034.2)

Rajic M., Banic M., Maksimović R., Mancic M., Milosavljevic P.: Energy and Utility Management Maturity Model for Sustainable Industry. In: Rackov, M., Mitrović, R., Čavić, M. (eds) Machine and Industrial Design in Mechanical Engineering. KOD 2021. Mechanisms and Machine Science, 11. International Symposium - KOD - Machine and Industrial Design in Mechanical Engineering, Novi Sad: Springer Nature, 10-12 June, 2021, pp. 453-361, ISBN 978-3-030-88465-9

Rajic M., Maksimović R., Milosavljevic P., Pavlovic D.: Energy Flow Model in Industrial Environment. In: Lalic, B., Gracanin, D., Tasic, N., Simeunović, N. (eds) Proceedings on 18th International Conference on Industrial Systems – IS’20. IS 2020. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Cham., 18. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Springer Nature, 7-9 October, 2020, pp. 377-384, ISBN 978-3-030-97947-8

57 57.00
M34
Saopštenje sa međunarodnog skupa štampano u izvodu
Saopštenje sa međunarodnog skupa štampano u izvodu
Zelenović D., Maksimović R.: FLEKSIBILNOST EFEKTIVNIH PREDUZEĆA , 11. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Univerzitet u novom Sadu, Fakultet tehničkih nauka, 28 October, 1999, pp. 15-15

Maksimović R.: SNIŽENJE SLOŽENOSTI ORGANIZACIONIH STRUKTURA - USLOV ZA EFEKTIVNO UPRAVLJANJE PREDUZEĆE, 11. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Univerzitet u novom Sadu, Fakultet tehničkih nauka, 28 October, 1999, pp. 49-49

***Morača S., Maksimović R.: Autori: mr Morača Slobodan, dipl. inž, Prof.,dr Rado Maksimović,. Naziv: CONSTRAINTS IN THE DEVELOPMENT OF »B2B« (Business to Business) Naziv skupa: INFOTEH-JAHORINA - Nije povezan skup**greska**

Rajić M., Banić M., Maksimović R., Mančić M., Milosavljević P.: Energy and Utility Management Maturity Model for Sustainable Industry, Book of abstracts, 11. International Symposium - KOD - Machine and Industrial Design in Mechanical Engineering, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, 10-12 June, 2021, pp. 71-71, ISBN 978-86-6022-339-7

4 2.00
M42
Monografija nacionalnog značaja
Monografija nacionalnog značaja
Maksimović R.: SLOŽENOST I FLEKSIBILNOST STRUKTURA INDUSTRIJSKIH SISTEMA - Monografija , Univerzitet u Novom Sadu - Fakultet tehničkih nauka, Edicija, 2003, str. 1-229, ISBN 86-80249-77-7, UDK: 65.01

1 5.00
M43
Monografska bibliografska publikacija, monografska studija nacionalnog značaja
Monografska bibliografska publikacija, monografska studija nacionalnog značaja
Ćosić I., Katić V., Kovačević I., Hodolič J., Maksimović R., Kolaković S.: FTN na putu ka evropskom obrazovnom prostoru, Novi Sad, Fakultet tehničkih nauka, 2012, str. 1-295, ISBN 978-86-7892-387-6

1 3.00
M44
Poglavlje u monografiji M41 ili rad u istaknutom tematskom zborniku vodećeg nacionalnog značaja
Poglavlje u monografiji M41 ili rad u istaknutom tematskom zborniku vodećeg nacionalnog značaja
Maksimović R., Kamberović B.: ANALIZA I POBOLJŠANJE REALIZACIJE USLUGE u knjizi: Vojislav Vulanović, Dragutin Stanivuković, Bato Kamberović, Nikola Radaković, Milan Pavlović, Slobodan Kecojević, Rado Maksimović: SISTEM KVALITETA * USLUGE, Novi Sad, Fakultet tehničkih nauka - Institut za industrijske sisteme i IIS-Istraživački i tehnološki centar, 1995, str. 113-130, UDK: 65.015.018

Vojislav V., Stanivuković D., Radaković N., Maksimović R., Kamberović B., Radlovački V.: REALIZACIJA PROIZVODA u knjizi: Dr Vojislav Vulanović, Dr Dragutin Stanivuković, Dr Bato Kamberović, Dr Rado Maksimović, Mr Nikola Radaković, Vladan Radlovački, Miodrag Šilobad: SISTEM KVALITETA ISO 9001:2000, Novi Sad, Fakultet tehničkih nauka i IIS-Istraživački i tehnološki centar, 2001, str. 127-205, UDK: 65.012.7:006.83

Maksimović R., Vojislav V., Kamberović B., Miodrag Š., Radlovački V.: MERENJE, ANALIZA I POBOLJŠAVANJA u knjizi: Dr Vojislav Vulanović, Dr Dragutin Stanivuković, Dr Bato Kamberović, Dr Rado Maksimović, Mr Nikola Radaković, Vladan Radlovački, Miodrag Šilobad: SISTEM KVALITETA ISO 9001:2000, Novi Sad, Fakultet tehničkih nauka i IIS-Istraživački i tehnološki centar, 2001, str. 207-282, UDK: 65.012.7:006.83

Vulanović V., Stanivuković D., Radaković N., Maksimović R., Kamberović B., Radlovački V.: REALIZACIJA PROIZVODA u knjizi: Dr Vojislav Vulanović, Dr Dragutin Stanivuković, Dr Bato Kamberović, Dr Rado Maksimović, Mr Nikola Radaković, Vladan Radlovački, Miodrag Šilobad: SISTEM KVALITETA ISO 9001:2000, Novi Sad, Fakultet tehničkih nauka - Institut za industrijske sisteme i IIS-Istraživački i tehnološki centar, 2003, str. 127-152, UDK: 65.012.7:006.83

Maksimović R., Vulanović V., Kamberović B., Šilobad M., Radlovački V.: MERENJE, ANALIZA I POBOLJŠAVANJA u knjizi: Dr Vojislav Vulanović, Dr Dragutin Stanivuković, Dr Bato Kamberović, Dr Rado Maksimović, Mr Nikola Radaković, Vladan Radlovački, Miodrag Šilobad: SISTEM KVALITETA ISO 9001:2000, Novi Sad, Fakultet tehničkih nauka - Institut za industrijske sisteme i IIS-Istraživački i tehnološki centar, 2003, str. 209-284, UDK: 65.012.7:006.83

Vulanović V., Stanivuković D., Radaković N., Maksimović R., Kamberović B., Radlovački V.: REALIZACIJA PROIZVODA u knjizi: Dr Vojislav Vulanović, Dragutin Stanivuković, Bato Kamberović, R. Maksimović, Nikola Radaković, V. Radovački, M. Šilobad: SISTEM KVALITETA, Novi Sad, Fakultet tehničkih nauka - Institut za industrijske sisteme i IIS-Istraživački i tehnološki centar, 2005, str. 127-208, ISBN 86-907041-0-8, UDK: 005.336.3 006.83

Maksimović R., Vulanović V., Kamberović B., Šilobad M., Radlovački V.: MERENJE, ANALIZA I POBOLJŠAVANJA u knjizi: Dr Vojislav Vulanović, Dragutin Stanivuković, Bato Kamberović, R. Maksimović, Nikola Radaković, V. Radovački, M. Šilobad: SISTEM KVALITETA, Novi Sad, Fakultet tehničkih nauka - Institut za industrijske sisteme i IIS-Istraživački i tehnološki centar, 2005, str. 209-284, ISBN 86-907041-0-8, UDK: 005.336.3 006.83

Vulanović V., Stanivuković D., Radaković N., Maksimović R., Kamberović B., Radlovački V.: REALIZACIJA PROIZVODA u knjizi: Dr Vojislav Vulanović, Dragutin Stanivuković, Bato Kamberović, R. Maksimović, Nikola Radaković, V. Radovački, M. Šilobad: SISTEM KVALITETA ISO 9001:2000, Novi Sad, Fakultet tehničkih nauka - Institut za industrijske sisteme i IIS-Istraživački i tehnološki centar, 2007, str. 127-208, ISBN 978-86-907041-3-2, UDK: 005.336.3 006.83

Maksimović R., Vulanović V., Kamberović B., Šilobad M., Radlovački V.: MERENJE, ANALIZA I POBOLJŠAVANJA u knjizi: Dr Vojislav Vulanović, Dragutin Stanivuković, Bato Kamberović, R. Maksimović, Nikola Radaković, V. Radovački, M. Šilobad: SISTEM KVALITETA ISO 9001:2000, Novi Sad, Fakultet tehničkih nauka - Institut za industrijske sisteme i IIS-Istraživački i tehnološki centar, 2007, str. 209-284, ISBN 978-86-907041-3-2, UDK: 005.336.3 006.83

9 18.00
M51
Rad u vodećem nacionalnom časopisu kategorije M51
Rad u vodećem nacionalnom časopisu kategorije M51
Radaković N., Maksimović R., Krsmanović C.: Struktura radova u procesu industrijskog projektovanja - podloga za uvođenje automatizacije (CAD/CAM tehnologije), Proizvodnja, 1980, Vol. 1, No. 12, pp. 18-21

Burbidge J., Zelenović D., Ćosić I., Maksimović R., Kamberović B.: Prilog razvoju postupaka grupisanja u uslovima realnog proizvodnog sistema, Časopis PROIZVODNJA, 1981, pp. 7-11

Zelenović D., Radaković N., Maksimović R.: PROJEKTOVANIJE PRZEPLYWU MATERIALOW W SYSTEMACH PRZEMYSLOWYCH , PM - Przglad Mechaniczny - Dwutygodnik naukowo-techniczny, 1989, No. 1/89, pp. 11-14

Zelenović D., Ćosić I., Maksimović R.: EIN BEITRAG ZUR ERFORSCHUNG DER BEDINGUNGEN FÜR DIE HERABSETZUNG DES KOMPLEXITÄTSGRADS VON PRODUKTIONSSYSTEMSTRUKTUREN, WT Werkstattstechnik, 1991, Vol. 1, No. 11/91, pp. 656-660, ISSN 0340-4544

Zelenović D., Ćosić I., Maksimović R., Radaković N.: The IIS - Approach To Design Of Effective Industrial Systems Structure, International Journal of Industrial Systems, 1998, Vol. 1, No. 1, pp. 5-16, ISSN 1450-7609

Zelenović D., Vulanović V., Stanivuković D., Kamberović B., Ćosić I., Maksimović R., Radaković N., Majstorović V.: UNAPREĐENjE KVALITETA U VISOKOŠKOLSKOM OBRAZOVANjU I NAUČNIM INSTITUTIMA , Menadžment totalnim kvalitetom i izvrsnost, 1999, Vol. 27, No. 1, pp. 288-293, ISSN 0354-9771, UDK: 658.5

Maksimović R., Radaković N., Tešić Z.: Prilaz unapređenju kvaliteta procesa u organizaciji (osvrt na "Six Sigma metodologiju), Menadžment totalnim kvalitetom i izvrsnost, 2006, Vol. 34, No. 1-2, pp. 121-124, ISSN 1452-0680, UDK: 658.5

Miškić M., Maksimović R.: ISTRAŽIVANJE DOSTIGNUTOG NIVOA KORPORATIVNOG UPRAVLJANJA U OSIGURAVAJUĆIM DRUŠTVIMA , Svijet osiguranja, 2008, No. 6, pp. 45-50, ISSN 1331-7695, UDK: 336.764.2; 368.025.6

Njegomir V., Maksimović R.: FINANCIJSKI DERIVATI POVEZANI SA RIZIKOM OSIGURANJA , Svijet osiguranja, 2008, Vol. 10, No. 10, pp. 43-49, ISSN 1331-7695, UDK: 336.764.2; 368.025.6

Maksimović R., Petrović S.: Complexity of Production Structures, Facta universitatis - series: Mechanical Engineering, 2009, Vol. 7, No. 1, pp. 119-136, ISSN 0354–2025, UDK: 658.51

Borocki J., Maksimović R.: Possible differences determination regarding service companies by applaying the strategic planning model in manufacturing companies, Facta universitatis - series: Mechanical Engineering, 2009, Vol. 7, No. 1, pp. 137-148, ISSN 0354–2025, UDK: 658.5

Zelenović D., Ćosić I., Maksimović R.: IIM - prilaz u razvoju efektivnih proizvodnih sistema za budućnost, Tehnika, 2010, Vol. 65, No. 3, pp. 125-133, ISSN 0040-2176, UDK: 322.5:330.352.46

12 24.00
M52
Rad u nacionalnom časopisu kategorije M52
Rad u nacionalnom časopisu kategorije M52
Zelenović D., Ćosić I., Maksimović R., Radaković N.: THE IIS - APPROACH TO DESIGN OF EFFECTIVE INDUSTRIAL SYSTEMS STRUCTURE , International Journal of Industrial Systems, 1998, Vol. 1, No. 1, pp. 5-16, ISSN 1450-7609

Kamberović B., Maksimović R.: UNAPREĐENJE SISTEMA KVALITETA - VIZA ZA TRŽIŠTA III MILENIJUMA , Total Quality Management, 1998, Vol. 26, No. 2, pp. 219-223, UDK: 658.5

Zelenović D., Vulanović V., Stanivuković D., Kamberović B., Ćosić I., Maksimović R., Radaković N., Majstorović V.: UNAPREĐENJE KVALITETA U VISOKOŠKOLSKOM OBRAZOVANJU I NAUČNIM INSTITUTIMA, Total Quality Management, 1998, Vol. 27, No. 1, pp. 288-293, UDK: 658.5

Zelenović D., Ćosić I., Maksimović R., Radaković N.: the IIS – approach to design of effective industrial systems structure, International Journal of Industrial Systems, 1998, No. 1, pp. 5-16, ISSN 1450-7609

Zelenović D., Maksimović R.: FLEXIBILITY OF EFFECTIVE ENTERPRISES , International Journal of Industrial Systems, 1999, Vol. 1, No. 2, pp. 33-38, ISSN 1450-7609

Maksimović R.: DECREASING OF ORGANIZATION STRUCTURES COMPLEXITY - A CONDITION FOR EFFECTIVE ENTERPRISE MANAGEMENT, International Journal of Industrial Systems, 1999, Vol. 1, No. 2, pp. 123-128, ISSN 1450-7609

Maksimović R., Ćosić I., Kovačević I., Katić V., Hodolič J.: SISTEM UPRAVLJANJA KVALITETOM U OBRAZOVNIM INSTITUCIJAMA , Total Quality Management & Excellence, 2005, Vol. 33, No. 1-2, pp. 267-271, ISSN 1452-0680, UDK: 658.5

Maksimović R., Babić M.: APPLIANCE OF STATISTICAL METHODS IN A MARKETING RESEARCH , Total Quality Management & Excellence, 2006, Vol. 34, No. 1-2, pp. 125-129, ISSN 1452-0680, UDK: 658.5

Maksimović R., Radaković N., Tešić Z.: AN APPROACH TO QUALITY IMPROVEMENT IN ORGANIZATION (ATTENTION ON "SIX-SIGMA" METODOLOGY), Total Quality Management & Excellence, 2006, Vol. 34, No. 1-2, pp. 121-124, ISSN 1452-0680, UDK: 658.5

Mitrović V., Maksimović R., Tešić Z.: APPLIANCE OF "BALANCED SCORECARD" METODOLOGY IN SMALL ENTERPRISE, Total Quality Management & Excellence, 2008, Vol. 36, No. 1-2, pp. 339-346, ISSN 1452-0680, UDK: 658.5

Maksimović R., Babić M.: AN EXAMPLE OF PRODDUCT INOVATION POTENTIAL ANALYSIS , Total Quality Management & Excellence, 2008, Vol. 36, No. 1-2, pp. 327-330, ISSN 1452-0680, UDK: 658.5

Kranjac M., Maksimović R., Sikimić U.: Model of using EU funds for projects realization in pre accession countries: The case of Serbia, Facta Universitatis - series: Economics and Organization, 2010, Vol. 7, No. 1, pp. 35-46, ISSN 0354-4699, UDK: 3398.96(4-672EU:497.11)

Todić V., Ćosić I., Tešić Z., Maksimović R.: Model kalkulacije troškova proizvoda baziran na primeni veštačkih neuronskih mreža, Tehnika, 2019, No. 5, pp. 711-718, ISSN 0040-2176, UDK: 657.474.5:004.032.26

Todić V., Maksimović R., Ćosić I.: Managing target costs at the development stage of a product, Journal of Production Engineering, 2020, Vol. 23, No. 2, pp. 7-15, ISSN 1821-4932

Maksimović R.: Access to Measuring and Balancing of Enterprise's Key Performance Indicators, Journal of Mechatronics, Automation and Identification Technology – JMAIT, 2020, Vol. 5, No. 4, pp. 1-11, ISSN 2466-3603

Rajić M., Maksimović R., Milosavljević P., Mančić M., Mančić M., Pavlović D.: ENERGY MANAGEMENT MODEL FOR ENVIRONMENTAL PROTECTION IN INDUSTRY Energy Management Model for Environmental protection in Industry, Facta universitatis - series: Working and Living Enviromental Protection, 2020, Vol. 17, No. 2, pp. 75-86, ISSN 0354–804X, UDK: 620.9:502.171

Rajić M., Milosavljević P., Maksimović R., Pavlović D.: Energy Management Model for Sustainable Production Process – A Case Study, Journal of Mechatronics, Automation and Identification Technology – JMAIT, 2021, Vol. 6, No. 1, pp. 1-5, ISSN 2466-3603

17 25.50
M53
Rad u nacionalnom časopisu kategorije M53
Rad u nacionalnom časopisu kategorije M53
Kranjac M., Maksimović R., Sikimic U.: A model of using IPA funds for projects realization in pre-accession countries: The case of Serbia, „Ekonomika”, 2010, Vol. 89, No. 2, pp. 28-43, ISSN 0350-3801

Đurić Ž., Maksimović R.: Efficiency of applying a model for measuring key performance indicators in an industrial enterprise, Scientific Research and Essays, 2013, Vol. 8, No. 14, pp. 554-574, ISSN 1992-2248, UDK: DOI 10.5897/SRE11.1392

2 2.00
M61
Plenarno ili uvodno predavanje po pozivu sa skupa nacionalnog značaja štampano u celini
Plenarno ili uvodno predavanje po pozivu sa skupa nacionalnog značaja štampano u celini
Maksimović R., Ćosić I., Kovačević I., Katić V., Hodolič J.: Sistem upravljanja kvalitetom u obrazovnim institucijama , 1. International Convention on Quality, Beograd: YUSQ, 30-2 Maj, 2005, pp. 267-271, ISBN 1452-0680

1 1.50
M63
Saopštenje sa skupa nacionalnog značaja štampano u celini
Saopštenje sa skupa nacionalnog značaja štampano u celini
Radaković N., Maksimović R., Krsmanović C.: STRUKTURA RADOVA U PROCESU INDUSTRIJSKOG PROJEKTOVANJA - PODLOGA ZA UVOĐENJE AUTOMATIZACIJE (CAD-CAM Tehnologije) , 2. Projektovanje proizvodnih sistema PPS, Novi Sad: Univerzitet u novom Sadu, Fakultet tehničkih nauka, 1 Oktobar, 1980, pp. 55-67

Burbidge J., Zelenović D., Ćosić I., Maksimović R., Kamberović B.: PRILOG RAZVOJU POSTUPAKA GRUPISANJA U USLOVIMA REALNOG PROIZVODNOG SISTEMA , 2. Projektovanje proizvodnih sistema PPS, Novi Sad: Univerzitet u novom Sadu, Fakultet tehničkih nauka, 1 Oktobar, 1980, pp. 403-428

***Burbidge J., Zelenović D., Ćosić I., Maksimović R., Kamberović B.: PRILOG RAZVOJU POSTUPAKA GRUPISANjA U USLOVIMA REALNOG PROIZVODNOG SISTEMA Naziv skupa: PPS '80 - Nije povezan skup**greska**

***Radaković N., Šormaz D., Maksimović R.: ANALIZA VARIJANTI PRI PROJEKTOVANJU PROIZVODNIH STRUKTURA TIPA RADNIH JEDINICA Naziv skupa: VII Stručni skup TRANSPORTNI PROCESI U INDUSTRIJI - Nije povezan skup**greska**

Maksimović R., Šišarica Z., Radaković N., Šormaz D.: RAZVOJ PODLOGA ZA AUTOMATIZOVANO PROJEKTOVANJE TOKOVA MATERIJALA U PROIZVODNIM SISTEMIMA, 10. JUPITER konferencija, Cavtat: Mašinski fakultet Beograd, 1 Februar, 1984, pp. 125-138

Radaković N., Maksimović R., Šormaz D.: RAZMATRANJE UTICAJA STEPENA AUTONOMNOSTI RADNE JEDINICE NA NAKE EFEKTE PROIZVODNOG SISTEMA, 6. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Univerzitet u novom Sadu, Fakultet tehničkih nauka, 1 Oktobar, 1984, pp. 193-198

Peruničić M., Radaković N., Maksimović R.: DIJAGNOSTIKA POJAVE ISTROŠENOSTI KLIZNIH LEŽAJEVA DIZEL MOTORA , 6. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Univerzitet u novom Sadu, Fakultet tehničkih nauka, 1 Oktobar, 1984, pp. 433-439

Šormaz D., Radaković N., Maksimović R., Šišarica Z.: STRUKTURA POSTUPKA OBLIKOVANJA ROIZVODNIH SISTEMA POVIŠENOG STEPENA FLEKSIBILNOSTI , 11. JUPITER konferencija, Cavtat: Mašinski fakultet Beograd, 1985, pp. 1-13

Šormaz D., Radaković N., Maksimović R., Šišarica Z.: STRUKTURA POSTUPKA MODELIRANJA PROCESA RADA PROIZVODNIH SISTEMA , 12. SYM-OP-IS Simpozijum o operacionim istraživanjima, Herceg Novi: Fakultet organizacionih nauka Beograd, 1-4 Oktobar, 1985, pp. 589-600

Zelenović D., Ćosić I., Šormaz D., Radaković N., Šišarica Z., Maksimović R.: PROJEKTOVANJE FLEKSIBILNIH PROIZVODNIH SISTEMA POSTUPCIMA OPTIMIZACIJE STRUKTURA , 13. SYM-OP-IS Simpozijum o operacionim istraživanjima, Herceg Novi: Fakultet organizacionih nauka Beograd, 7-10 Oktobar, 1986, pp. 751-759

Maksimović R.: PRILOG ISTRAŽIVANJU USLOVA ZA OBLIKOVANJE PROIZVODNIH STRUKTURA OPTIMALNOG STEPENA SLOŽENOST, 7. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Univerzitet u novom Sadu, Fakultet tehničkih nauka, 1 Oktobar, 1987, pp. 26-32

Maksimović R.: PRILOG ODREĐIVANJU MERE TEHNOLOŠKE FLEKSIBILNOSTI PROIZVODNIH STRUKTURA , 15. SYM-OP-IS Simpozijum o operacionim istraživanjima, Brioni: Fakultet organizacionih nauka Beograd, 11-14 Oktobar, 1988, pp. 50-52

Šešlija D., Maksimović R.: PROJEKTOVANJE EFEKTIVNIH PROIZVODNIH SISTEMA I FLEKSIBILNOST INDUSTRIJSKIH ROBOTA , 1. Efektivni proizvodni sistemi, Dubrovnik: Univerzitet u novom Sadu, Fakultet tehničkih nauka, 1988, pp. 1-17

Maksimović R., Šešlija D.: RAZVOJ I MOGUĆNOSTI HVATANJA FLEKSIBILNE VIŠEPRSTNE HVATALJKE , 6. Jugoslovenski simpozijum za primenjenu robotiku i fleksibilnu automatizaciju, Novi Sad: Univerzitet u novom Sadu, Fakultet tehničkih nauka, 12-14 Jun, 1989, pp. 471-480

Maksimović R., Šešlija D.: Razvoj i mogućnosti primene fleksibilne višeprstne hvataljke, 6. Jugoslovenski simpozijum za primenjenu robotiku i fleksibilnu automatizaciju, Novi Sad: Jugoslovenski savez za ETAN, 12-14 Jun, 1989, pp. 473-480

Ćosić I., Maksimović R., Šešlija D.: Prilog istraživanju radnih karakteristika robotizovanih montažnih sistema, 5. Jugoslavensko savjetovanje o robotizacijii - JUROB, Rijeka, 19-21 April, 1989, pp. 4-4

Maksimović R.: PRILOG ISTRAŽIVANJU USLOVA ZA SNIŽAVANJE STEPENA SLOŽENOSTI STRUKTURA PROIZVODNIH SISTEMA, 16. JUPITER konferencija, Cavtat: Mašinski fakultet Beograd, 3-9 Februar, 1990, pp. 115-120

***Maksimović R., Zelenović D.: NEKI REZULTATI ISTRAŽIVANJA ZAVISNOSTI STEPENA SLOŽENISTI I STEPENA FLEKSIBILNOSTI EFEKTIVNIH PROIZVODNIH STRUKTURA Naziv skupa: Naučna konferencija INDUSTRIJSKI SISTEMI IS'90 - Nije povezan skup**greska**

***Zelenović D., Ćosić I., Maksimović R., Radaković N.: RAZVOJ POSTUPKA ZA PROJEKTOVANJE PROIZVODNIH SISTEMA SA BUDUĆNOŠĆU Naziv skupa: Naučno-stručni skup ORGANIZACIJA POSLOVNO-PROIZVODNIH SISTEMA - Nije povezan skup**greska**

***Ćosić I., Radaković N., Maksimović R.: Osnove radnih postupaka u industrijskim sistemima - Nije povezan skup**greska**

Radaković N., Dakić R., Maksimović R.: PRILOG RAZVOJU PROGRAMSKOG SISTEMA ZA PROJEKTOVANJE TEHNOLOŠKIH POSTUPAKA NA GRUPNIM PRINCIPIMA, 24. Savetovanje proizvodnog mašinstva Jugoslavije, Novi Sad: Univerzitet u novom Sadu, Fakultet tehničkih nauka, 16-18 Septembar, 1992, pp. 4-4

Maksimović R., Radaković N., Dakić R.: RAZVOJ POSTUPKA ZA AUTOMATIZOVANO PROJEKTOVANJE PROSTORNIH STRUKTURA PROIZVODNIH SISTEMA , 19. JUPITER konferencija, Prohor Pčinjski: Mašinski fakultet Beograd, 28-1 Jun, 1993, pp. 69-74

Maksimović R., Radaković N., Dakić R.: RAZVOJ PROGRAMSKOG PAKETA ZA PROJEKTOVANJE PROSTORNIH STRUKTURA PROIZVODNIH SISTEMA , 2. Jugoslovenski seminar o primeni CAD tehnologija - CAD forum, Novi Sad: Vojvodina PRO-ING, 13-14 April, 1995, pp. 150-155

Zelenović D., Ćosić I., Maksimović R.: Primena grupne tehnologije u industrijskim proizvodnim sistemima, 5. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad, 8-9 Jun, 1994, pp. 795-802

***Zelenović D., Ćosić I., Maksimović R.: O NEKIM EFEKTIMA PRIMENE GRUPNE TEHNOLOGIJE U INDUSTRIJSKIM SISTEMIMA Naziv skupa: 25th Conference on Production Engineering - Nije povezan skup**greska**

Maksimović R., Kamberović B.: ISO 9000 I ODRŽAVANjE , 21. Majski skup održavalaca, Beograd, 1998

Morača S., Maksimović R.: INTEGRACIJA FUNKCIJA PREDUZEĆA NA OSNOVAMA OBJEKTNO-ORIJENTISANOG PRILAZA U RAZVOJU INFORMACIONOG SISTEMA, 2. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet Srpsko Sarajevo, 25-27 Mart, 2002, pp. 265-269

Maksimović R., Ćosić I., Kamberović B.: ITC - PRIMER JEDINICE NT PARKA , 8. Skup "Trendovi razvoja" - TREND, Kopaonik: Univerzitet u novom Sadu, Fakultet tehničkih nauka, 25-28 Februar, 2002, pp. 37-40

Ćosić I., Kamberović B., Maksimović R.: Sistem upravljanja kvalitetom u visokoškolskim organizacijama i NT parkovi, 8. Skup "Trendovi razvoja" - TREND, Kopaonik: Univerzitet u novom Sadu, Fakultet tehničkih nauka, 25-28 Februar, 2002, pp. 47-51

Ćosić I., Maksimović R.: Kultura kvaliteta i preduzetništvo na tehničkim fakultetima, 9. Skup "Trendovi razvoja" - TREND, Kopaonik: Univerzitet u novom Sadu, Fakultet tehničkih nauka, 3-6 Mart, 2003, pp. 51-58

***Stefanović D., Maksimović R., Ćosić I.: UPRAVLJANJE KONFIGURACIJOM SOFTVERSKOG PROJEKTA Naziv skupa: III naučno-stručni skup INFORMACIONE TEHNOLOGIJE - Nije povezan skup**greska**

Stefanović D., Maksimović R., Ćosić I.: UPRAVLJANJE RAZVOJEM SOFTVERSKOG PROIZVODA, 9. Naučno stručni skup Informacione tehnologije IT, Žabljak, 2004

Katić V., Ćosić I., Maksimović R., Lalić B.: Finansijski tokovi na integrisanom Univerzitetu, 10. Skup "Trendovi razvoja" - TREND, Kopaonik: Fakultet tehničkih nauka, 7-10 Mart, 2005, pp. 748-75

Ćosić I., Maksimović R., Katić V., Lalić B.: Organizacija i upravljanje integrisanim Univerzitetom , 10. Skup "Trendovi razvoja" - TREND, Kopaonik: Fakultet tehničkih nauka, 7-10 Mart, 2005, pp. 68-72

Maksimović R., Ćosić I.: MODEL ZA ANALIZU USPEŠNOSTI STUDIJA, 10. Skup "Trendovi razvoja" - TREND, Kopaonik: Univerzitet u novom Sadu, Fakultet tehničkih nauka, 7-10 Mart, 2005, pp. 59-63, UDK: 3786:621:378.147(082)

Ćosić I., Maksimović R., Katić V., Lalić B.: Organizacija i upravljanje integrisanim univerzitetom, 10. Skup "Trendovi razvoja" - TREND, Kopaonik: Univerzitet u novom Sadu, Fakultet tehničkih nauka, 7-10 Mart, 2005, pp. 78-82, UDK: 3786:621:378.147(082)

Stefanović D., Maksimović R., Ćosić I.: STRUKTURNA SISTEM ANALIZA U KONTEKSTU FUNKCIJE SIMULACIJA PROIZVODNIH PROCESA PRIMENOM ORACLE CASE ALATA DESIGNER 9i, 10. Naučno stručni skup Informacione tehnologije IT, Žabljak, 27-1 Mart, 2005

Maksimović R., Ćosić I., Kovačević I., Katić V., Hodolič J.: Iskustva u primeni standarda ISO 9000 u obrazovnim institucijama , 11. Skup "Trendovi razvoja" - TREND, Kopaonik: Fakultet tehničkih nauka, 7-10 Mart, 2005, pp. 86-90, ISBN 86-85211-24-7

Ćosić I., Maksimović R., Lalić B.: Obezbeđenje kvaliteta integrisanog univerziteta, 12. Skup "Trendovi razvoja" - TREND, Kopaonik: Univerzitet u novom Sadu, Fakultet tehničkih nauka, 6-9 Mart, 2006, pp. 115-119, ISBN 86-85211-77-8, UDK: 378:340.134(497.11+497.16)(082)

Marinković-Nedučin R., Ćosić I., Maksimović R., Lalić B., Babin M., Bojanić R.: Organizaciona struktura integrisanog univerziteta - uvodno predavanje, 15. Skup "Trendovi razvoja" - TREND, Kopaonik: Univerzitet u novom Sadu, Fakultet tehničkih nauka, 2-5 Mart, 2009, pp. 30-33, ISBN 86-85211-77-8, UDK: 378:340.134(497.11+497.16)(082)

Maksimović R.: STANDARDI ZA AKREDITACIJU VISOKOŠKOLSKIH USTANOVA I STUDIJSKIH PROGRAMA I STANDARDI ISO 9000, 13. Skup "Trendovi razvoja" - TREND, Kopaonik: Univerzitet u novom Sadu, Fakultet tehničkih nauka, 5-8 Mart, 2007, pp. 14-17, ISBN 978-86-7892-036-3, UDK: 378.014.3(497.11)(082)

Maksimović R.: PARAMETRI KVALITETA VISOKOŠKOLSKE USTANOVE , 13. Skup "Trendovi razvoja" - TREND, Kopaonik: Univerzitet u novom Sadu, Fakultet tehničkih nauka, 5-8 Mart, 2007, pp. 47-51, ISBN 978-86-7892-036-3, UDK: 378.014.3(497.11)(082)

Maksimović R., Ćosić I.: ISKUSTVA U SAMOVREDNOVANJU VISOKOŠKOLSKIH USTANOVA I STUDIJSKIH PROGRAMA I STANDARDI ISO 9000 , 14. Skup "Trendovi razvoja" - TREND, Kopaonik: Univerzitet u Novom Sadu, Fakultet tehničkih nauka, 3-6 Mart, 2008, pp. 42-43, ISBN 978-86-7892-036-3, UDK: 378.014.3(497.11)(082); 378.014(497.11)(082)

***Renovica R., Maksimović R.: ISKUSTVA U PRIMENI SISTEMA MENADŽMENTA KVALITETOM U OSIGURAVAJUĆEM DRUŠTVU Naziv skupa: 11. Međunarodno savetovanje "Osiguranje i naknada štete" - Nije povezan skup**greska**

Maksimović R., Ćosić I.: Iskustva u samovrednovanju visokoškolskih ustanova i studijskih programa i standardi ISO 9000 , 14. Skup "Trendovi razvoja" - TREND, Kopaonik: Univerzitet u Novom Sadu, Fakultet tehničkih nauka, 3-6 Mart, 2008, pp. 42-43, ISBN 978-86-7892-036-3, UDK: 378.014.3(497.11)(082)

Maksimović R.: Obezbeđenje spremnosti fakuleteta za spoljnu proveru kvaliteta u bilo koje vreme, 15. Skup "Trendovi razvoja" - TREND, Kopaonik: Fakultet tehničkih nauka u Novom Sadu, 2-5 Mart, 2009, pp. 133-140, ISBN 978-86-7892-157-5, UDK: 378.014.3(497.11)(082); 378.14(497.11)(082)

Dudić Z., Maksimović R.: Mala i srednja preduzeća u Srbji - poređenje tranzicionih uslova sa slovačkom privredom, 1. Poslovno okruženje u Srbiji i svetska ekonomska kriza, Novi Sad: Visoka poslovna škola strukovnih studija Novi Sad, 27 Septembar, 2009, pp. 1-10, UDK: 65.017.1/32(497.11:437.6)

Ferenčak M., Dobromirov D., Maksimović R., Radišić M., Stanišić I.: In-house company academy as a model for cooperation between universities and companies, 1. Trendovi razvoja - TREND, Kopaonik: Fakulet tehničkih nauka, 2011, pp. 249-252, ISBN 978-86-7892-323-4

Maksimović R.: Performanse visokoškolske ustanove - osnova za rangiranje, 1. Trendovi razvoja TREND, Novi Sad: Univerzitet u Novom Sadu, Fakultet tehničkih nauka, 27-1 Februar, 2012, pp. 138-143, ISBN 978-86-7892-388-3

Tasić N., Maksimović R., Lalić B., Ćulibrk J., Delić M.: Selecting Key Performance Indicators in Higher Education, 21. TREND - Trendovi razvoja, Zlatibor: Fakultet tehničkih nauka, 23-26 Februar, 2015, pp. 136-140, ISBN 978-86-7892-680-8

Tasić N., Maksimović R., Lalić B., Marjanović U., Branislav B., Delić M.: Istraživanje relevantnosti ključnih indikatora performansi u visokom obrazovanju, 23. Trendovi razvoja TREND, Zlatibor: Fakultet tehnickih nauka Univerziteta u Novom Sadu, 22-24 Februar, 2017, pp. 269-272, ISBN 978-86-7892-904-5

Krunić G., Đurić Ž., Maksimović R.: Uticaj ulaznih parametara elektrodistributivnog sektora na povećanje potrošnje i broja potrošača električne energije, 16. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet Istočno Sarajevo, 22-24 Mart, 2017, pp. 50-54

Krunić G., Đurić Ž., Maksimović R.: Pregled promjena tehničkih parametara na primjeru preduzeća Z.P. "Elektro - Hercegovina" a.d. Trebinje, 16. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet Istočno Sarajevo, 22-24 Mart, 2017, pp. 44-49

53 53.00
M71
Odbranjena doktorska disertacija
Odbranjena doktorska disertacija
Maksimović R.: Istraživanje uticaja izbora varijante proizvodnih struktura na stepen složenosti i stepen fleksibilnosti industrijskih sistema, Doktorska disertacija , Novi Sad, Fakultet tehničkih nauka, 1998, str. 1-229

1 6.00
M72
Odbranjen magistarski rad
Odbranjen magistarski rad
Maksimović R.: Istraživanje radnih karakteristika efektivnih proizvodnih struktura, Magistarska teza , Novi Sad, Fakultet tehničkih nauka, 1989, str. 1-129

1 0.00
M81
Novo tehničko rešenje primenjeno na međunarodnom nivou
Novo tehničko rešenje primenjeno na međunarodnom nivou
Maksimović R.: VIŠEPRSTNA FLEKSIBILNA ROBOTSKA HVATALJKA - Model I Korisnik: University of Southern California - Los Angeles Rađeno za: University of Southern California , 1989

Maksimović R.: VIŠEPRSTNA FLEKSIBILNA ROBOTSKA HVATALJKA - Model II Korisnik: University of Southern California Rađeno za: University of Southern California - Los Angeles, Institute of Real Time Systems - Berlin, GPL Laboratories (NASA) , 1990

2 24.00
M84
Poboljšano tehničko rešenje na nacionalnom nivou
Poboljšano tehničko rešenje na nacionalnom nivou
Zelenović D., Ćosić I., Radaković N., Maksimović R.: PROGRAM ZA RAST PRODUKTIVNOSTI , 1984

Zelenović D., Maksimović R.: STRATEGIJA TEHNOLOŠKOG RAZVOJA JUGOSLAVIJE , 1988

Zelenović D., Maksimović R.: PROGRAM REALIZACIJE STRATEGIJE TEHNOLOŠKOG RAZVOJA JUGOSLA¬VIJE U VOJVODINI, 1988

3 9.00
M85
Prototip, nova metoda, softver, standardizovan ili atestiran instrument,
Prototip, nova metoda, softver, standardizovan ili atestiran instrument,
Zelenović D., Ćosić I., Dakić R., Maksimović R.: Automatizovani postupak za oblikovanje proizvodnih sistema – APOPS-08 (softver) , 1990

Zelenović D., Ćosić I., Maksimović R., Dakić R.: Automatizovani postupak za projektovanje prostornih struktura, proizvodnih sistema (softver) , 1994

2 0.00

Korisnički servis