Prezime:	Kovač
Ime:	Pavel
APVNT broj:	211
Organizacija:	Fakultet tehničkih nauka u Novom Sadu

Produkcija - zbirni rezultati
Oznaka	Naziv kriterijuma produkcije	Broj	Poena
		379	582.00
M14	Monografska studija/poglavlje u knjizi M12 ili rad u tematskom zborniku međunarodnog značaja Monografska studija/poglavlje u knjizi M12 ili rad u tematskom zborniku međunarodnog značaja Gostimirović M., Pucovski (Pucovsky) V., Kovač P., Sekulić M., Savković B.: An analytical study of energy partition in grinding, Pfaffikon, Key Engineering Materials, Trans Tech Publications Ltd, Switzerland, 2016, str. 80-85, ISBN 978-3-03835-625-7 Kovač P., Pucovski (Pucovsky) V., Gostimirović M., Savković B., Šoos Lj., Ješić D.: Cutting force during grinding determined by regression analysis and genetic algorithms, Pfaffikon, Key Engineering Materials, Trans Tech Publications Ltd, Switzerland, 2016, str. 13-18, ISBN 978-3-03835-625-7 Djurica D., Sekulić M., Kramar D., Kovač P., Gostimirović M.: Using Advanced CAM System in Modern Machining, Pfaffikon, Trans Tech Publications Ltd, Switzerland, 2016, str. 27-32, ISBN 978-3-03835-625-7 Bachraty M., Tolnay M., Kovač P., Pucovski (Pucovsky) V.: Influence of Various Cutting Fluids on Energy Consumption during Turning, Pfaffikon, Trans Tech Publications Ltd, Switzerland, 2016, str. 252-256, ISBN 978-3-03835-625-7 Kovač P., Savković B., Rodić D., Gostimirović M., Sekulić M., Ješić D.: Application of Neuro-Fuzzy Systems for Modeling Surface Roughness Parameters for Steel Difficult-to-Cut-Steel,, Pfaffikon, Solid State Phenomena, Trans Tech Publications Ltd, Switzerland, 2017, str. 277-284, ISBN 978-3-0357-1199-8 Kovač P., Gostimirović M.: Grinding Force of Cylindrical and Creep-Feed Grinding Modeling, In book: Abrasive Technology-Characteristics and Applications, Chapter 4, London, IntechOpen, United Kingdom, 2018, str. 65-82, ISBN 978-1-78984-194-7	6	24.00
M17	Uređivanje naučne monografije ili tematskog zbornika vodećeg međunarodnog značaja Uređivanje naučne monografije ili tematskog zbornika vodećeg međunarodnog značaja Kovač P.: Edited by: Key Engineering Materials, Trans Tech Publications Ltd, Switzerland, 2016, ISSN web 1662-9795., Pfaffikon, Trans Tech Publications Ltd, Switzerland, 2016, str. 1-260, ISBN 978-3-03835-625-7	1	3.00
M21	Rad u vrhunskom međunarodnom časopisu Rad u vrhunskom međunarodnom časopisu Šiđanin (Sidjanin) L., Kovač P.: Fracture mechanisms in chip formation processes, Materials Science and Technology, 1997, Vol. 13, pp. 439-444, ISSN 0267-0836 Kovač P., Gostimirović M., Rodić D., Savković B.: Using the temperature method for the prediction of tool life in sustainable production, Measurement, 2019, Vol. 133, pp. 320-327, ISSN 0263-2241	2	16.00
M22	Rad u istaknutom međunarodnom časopisu Rad u istaknutom međunarodnom časopisu Kovač P., Šiđanin (Sidjanin) L.: Investigation of Chip Formation During Milling , International Journal of Production Economics, 1997, Vol. 51, pp. 149-153, ISSN 0925-5273 Gostimirović M., Kovač P., Sekulić M., Škorić B.: Influence of discharge energy on machining characteristics in EDM, Journal of Mechanical Science and Technology, 2012, Vol. 26, No. 1, pp. 173-179, ISSN 1738-494X Kovač P., Šiđanin (Sidjanin) L., Rajnović D., Savković B., Wannasin J.: The microstructure influence on the chip formation process of Al-Cu alloy cast conventionally and in semi solid state, Metalurgija, 2012, Vol. 51, No. 1, pp. 34-38, ISSN 0543-5846, UDK: 669.715:621.96.621.773:620.18=111 Gostimirović M., Kovač P., Ješić D., Škorić B., Savković B.: Surface layer properties of the workpiece material in high performance grinding, Metalurgija, 2012, Vol. 51, No. 1, pp. 105-108, ISSN 0543-5846, UDK: 621.7:621.923:621.795:536.5=111 Golubović D., Kovač P., Ješić D., Gostimirović M., Pucovski (Pucovsky) V.: Wear Intensity of Diffrent Heat Treated Nodular Iron, Metalurgija, 2012, Vol. 51, No. 4, pp. 518-520, ISSN 0543-5846, UDK: 669.13:620.178.1:621.78=111 Kovač P., Rodić D., Pucovski (Pucovsky) V., Savković B., Gostimirović M.: Application of Fuzzy Logic and Regression Analysis for Modeling Surface Roughness in Face Milliing, Journal of Intelligent Manufacturing, 2013, Vol. 24, No. 4, pp. 755-762, ISSN 0956-5515, UDK: DOI 10.1007/s10845-012-0623-z Kovač P., Rodić D., Pucovski (Pucovsky) V., Savković B., Gostimirović M.: Multi-output fuzzy inference system for modeling cutting temperature and tool life in face milling, Journal of Mechanical Science and Technology, 2014, Vol. 28, No. 10, pp. 4247-4256, ISSN 1738-494X, UDK: DOI 10.1007/s12206-014-0938-0 Kovač P., Petrović V., Pucovski (Pucovsky) V., Birčanin B., Savković B., Gostimirović M.: ENERGY EFFICIENCY CART MODELING OF SOLAR ENERGY COLLECTORS BY GENETIC PROGRAMMING, Thermal Science, 2016, Vol. 20, No. S2, pp. 471-479, ISSN 0354-9836 Tarić M., Kovač P., Nedić B., Rodić D., Ješić D.: Monitoring and neural network modeling of cutting temperature during turning hard steel, Thermal Science, 2018, Vol. 22, No. 2, pp. 1-10, ISSN 0354-9836 Baralić J., Dučić N., Mitrović A., Kovač P., Lučić M.: Modeling and optimization of temperature in cutting zone in milling machining, Thermal Science, 2019, Vol. 23, ISSN 0354-9836 Savković B., Kovač P., Dudić B., Rodić D., Tarić M., Gregus M.: Application of an Adaptive “Neuro-Fuzzy” Inference System in Modeling Cutting Temperature during Hard Turning, Applied Sciences, 2019, Vol. 9, No. 18, pp. 1-13, ISSN 2076-3417 Savković B., Kovač P., Dudić B., Gregus M., Rodić D., Štrbac B., Dučić N.: Comparative Characteristics of Ductile Iron and Austempered Ductile Iron Modeled by Neural Network , Materials, 2019, Vol. 12, No. 18, pp. 1-16, ISSN 1996-1944 Savković B., Kovač P., Rodić D., Štrbac B., Klancnik S.: Comparison of artificial neural network, fuzzy logic and genetic algorithm for cutting temperature and surface roughness prediction during the face milling process, Advances in Production Engineering and Management, 2020, Vol. 15, No. 2, pp. 137-150, ISSN 1854-6250 Dudić B., Smolen j., Kovač P., Savković B., Dudić Z.: Electricity Usage Efficiency and Electricity Demand Modeling in the Case of Germany and the UK, Applied Sciences, 2020, Vol. 10, No. 7, pp. 1-12, ISSN 2076-3417 Savković B., Kovač P., Dudić B., Gregus M.: Decoding of Factorial Experimental Design Models Implemented in Production Process, Computers Materials and Continua / CMC, 2022, Vol. 71, No. 1, pp. 1-15, ISSN 1546-2218 Savković B., Rodić D., Sekulić M., Kovač P., Štrbac B., Klančnik S.: Implementation of a Virtual Instrument in the System for Measuring Forces and Temperatures in the Milling Process, Processes, 2024, Vol. 12, pp. 1-22, ISSN 2227-9717	16	80.00
M23	Rad u međunarodnom časopisu Rad u međunarodnom časopisu ***Autori: Kovač, P., Milikić D. Naziv: Teplota reznych plôch nástroja pri čelnom frézovaní Naziv časopisa: Náradie. Nove Zamky - Nisu povezani autori**greska** Šiđanin (Sidjanin) L., Kovač P., Novović M., Fišl J.: SEM Study of Fracture Mechanisms in Ductile Iron, Metallurgy and New Materials Researches, 1997, No. 3, pp. 41-48, ISSN 1221-5503 ***Autori: Šiđanin L., Kovač, P. Naziv: Metallographic Study of Chip Formation Proces Naziv časopisa: Bilten SANU, T.CXV - Nisu povezani autori**greska** Gostimirović M., Kovač P., Škorić B., Sekulić M.: Effect of Electrical Pulse Parameters on the Machining Performance of EDM, Indian Journal of Engineering and Materials Sciences, 2011, Vol. 18, No. 6, pp. 411-415, ISSN 0971-4588 Gostimirović M., Sekulić M., Kopač J., Kovač P.: Optimal Control of Workpiece Thermal State in Creep-Feed Grinding Using Inverse Heat Conduction Analysis, Strojniski vestnik - Journal of Mechanical Engineering, 2011, Vol. 57, No. 10, pp. 730-738, ISSN 0039-2480 Gostimirović M., Kovač P., Sekulić M.: An inverse heat transfer problem for optimization of the thermal process in machining, Sadhana - Academy Proceedings in Engineering Science, 2011, Vol. 36, No. 4, pp. 489-504, ISSN 0256-2499 Nagy L., Palkova Z., Valicek J., Kiedrowicz M., Rokosz K., Kovač P.: Identification of Model Lightening System and Design of PID Controllers for the Purpose of Energy Savings by Using of MATLAB and Their Functionality in LabVIEW (Article), Rocznik Ochrona Srodowiska, 2012, Vol. 14, pp. 247-261, ISSN 1506-218X Vrač D., Šiđanin (Sidjanin) L., Kovač P., Baloš S.: The influence of hohning process parameters on surface quality, productivity, cutting angle and coefficients of friction, Industrial Lubrication and Tribology, 2012, Vol. 64, No. 2, pp. 77-83, ISSN 0036-8792 Radonjić S., Kovač P., Slavković R., Dučić N., Baralić J.: Experimental Determination of Chip Compression ratio During Counterboring, Tehnics Tehnologies Education Management / TTEM, 2012, Vol. 7, No. 2, pp. 539-543, ISSN 1840-1503 Golubovic D., Kovač P., Jesic D., Gostimirović M.: Tribological properties of ADI material, Journal of the Balkan Tribological Association, 2012, Vol. 18, No. 2, pp. 165-173, ISSN 1310-4772 Sovilj-Nikić I., Sovilj B., Kandeva M., Gajic V., Sovilj-Nikic S., Legutko S., Kovač P.: Tribological Characteristics of Hob Milling Tools from Economical Aspects, Journal of the Balkan Tribological Association, 2012, Vol. 18, No. 4, pp. 577-585, ISSN 1310-4772 Golubović B., Kovač P., Golubović D., Ješić D.: Optimum Solutions of the Municipal Waste­water Mechanical Treatment System for Medium-sized and Smaller Settlements on the Adriatic Coast, Journal of the Balkan Tribological Association, 2013, Vol. 19, No. 3, ISSN 1310-4772 Šooš L., Ondruška J., Biath P., Kovač P.: Development of Modular Flood Barrier Concept Made From Recycled Plastic, Chemicke Listy, 2013, Vol. 107, pp. 94-96, ISSN 0009-2770 Vrač D., Šiđanin (Sidjanin) L., Baloš S., Kovač P.: The influence of tool kinematics on surface texture, productivity, power and torque of normal honing, Industrial Lubrication and Tribology, 2014, Vol. 66, No. 2, pp. 215-222, ISSN 0036-8792 Kovač P., Pucovski (Pucovsky) V., Gostimirović M., Savković B., Rodić D.: INFLUENCE OF DATA QUANTITY ON ACCURACY OF PREDICTIONS IN MODELING TOOL LIFE BY THE USE OF GENETIC ALGORITHMS, International Journal of Industrial Engineering: Theory, Applications and Practice, 2014, Vol. 21, No. 2, pp. 14-21, ISSN 1943-670X Golubovic D., Kovač P., Savković B., Jesic D., Gostimirović M.: Testing the tribological characteristics of nodular cast iron austempered by a conventional and an isothermal procedure, Materiali in Tehnologije, 2014, Vol. 48, No. 2, pp. 293-298, ISSN 1580-2949, UDK: 669.131.6:531.43:620.178.1 Simic S., Golubović D., Savković B., Kovač P., Ješić D.: MONITORING OF WOOD BRIQUETTES COMBUSTION PARAMETERS DEPENDING ON SHARE WASTE MATERIALS OBTAINED FROM REFINING PROCESS OF BASE OILS AND PARAFFIN, Oxidation Communication, 2016, Vol. 39, No. 4, pp. 3291-3304, ISSN 0209-4541 Babič M., Hluchy L., Krammer P., Matovič B., Kumar R., Kovač P.: New Method for Constructing a Visibility Graph-Network in 3D Space and a New Hybrid System of Modeling, Computing and Informatics, 2017, Vol. 36, No. 5, pp. 1107-1126, ISSN 1335-9150 Kovač P., Ješić D., Sovilj-Nikić S., Kandeva M., Kalitchin Z., Gostimirović M., Savković B.: ENERGY ASPECTS OF TRIBOLOGICAL BEHAVIOUR OF NODULAR CAST IRON, Journal of Environmental Protection and Ecology, 2018, Vol. 19, No. 1, pp. 163-172, ISSN 1311-5065 Simić S., Kovač P., Sovilj-Nikić S., Kandeva M., Kalitchin Z., Ješić D., Golubović D.: RESEARCH ABOUT POSSIBILITY FOR INCINERATION IN FLUIDISED BED OF WASTE MATERIALS PRODUCED BY PROCESSING OF USED LUBRICATING OILS, Journal of Environmental Protection and Ecology, 2018, Vol. 19, No. 1, pp. 272-280, ISSN 1311-5065 Gostimirović M., Kovač P., Sekulić M.: An inverse optimal control problem in the electrical discharge machining, Sadhana - Academy Proceedings in Engineering Science, 2018, Vol. 43, No. 5, pp. 1-10, ISSN 0256-2499 Pejović B., Kovač P., Pucovski (Pucovsky) V., Todić A.: Theoretical Study of Tool Holder Self-excited Oscillation in Turning Processes Using a Nonlinear Model, International Journal of Acoustics and Vibration, 2018, Vol. 23, No. 3, pp. 307-313, ISSN 1027-5851 Ješić D., Kovač P., Plavšić M., Šooš L., Sarjanović D.: Wear resistance of austempered pearlitic ductile iron, Kovove Materialy - Metallic Materials, 2018, Vol. 56, No. 6, pp. 415-418, ISSN 0023-432X Baloš S., Rajnović D., Šiđanin (Sidjanin) L., Savković B., Kovač P., Janjatović P.: Tensile and fatigue properties, machinability and machined surface roughness of Al-Si-Cu alloys, Revista Materia, 2019, Vol. 24, No. 03, ISSN 1517-7076 Savković B., Kovač P., Stoić A., Dudić B.: Optimization of Machining Parameters Using the Taguchi and ANOVA Analysis in the Face Milling of Aluminum Alloys AL7075, Tehnički vjesnik - Technical Gazette, 2020, Vol. 27, No. 4, pp. 1221-1228, ISSN 1330-3651 Jesic D., Sovilj-Nikic S., Kovač P., Sovilj B., Kandeva M., Kalitchin Z., Savković B.: Eco-Tribological Properties of Nodular Cast Iron of Ferritic Structural Basis, Journal of Environmental Protection and Ecology, 2022, Vol. 23, No. 1, pp. 171-182, ISSN 1311-5065	26	78.00
M24	Rad u časopisu međunarodnog značaja verifikovanog posebnom odlukom Rad u časopisu međunarodnog značaja verifikovanog posebnom odlukom Kovač P., Rodić D., Savković B., Pucovski (Pucovsky) V., Gostimirović M.: Modelling Tool Wear in Avoiding the Risk of Breakage by Using Fuzzy Logic, Integritet i vek konstrukcija, 2015, Vol. 15, No. 2, pp. 103-109, ISSN 1451-3749, UDK: 621 Bachraty M., Tolnay M., Kovač P., Pucovski (Pucovsky) V.: Neural Network Modeling of Cutting Fluid Impact on Energy Consumption during Turning, Tribology in Industry, 2016, Vol. 38, No. 2, pp. 149-155, ISSN 0354-8996	2	6.00
M31	Predavanje po pozivu sa međunarodnog skupa štampano u celini Predavanje po pozivu sa međunarodnog skupa štampano u celini Kovač P., Gostimirović M., Sekulić M., Savković B.: Main developments in cutting technology-Keynote Paper, 10. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 9-10 October, 2009, pp. 13-21, ISBN 978-86-7892-223-7 Kovač P., Gostimirović M., Sekulić M., Savković B.: Modeling and simulation of cutting process-Invited Paper, 10. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 9-10 October, 2009, pp. 22-27, ISBN 978-86-7892-223-7 Kramar D., Sekulić M., Kovač P., Gostimirović M., Kopač J.: The Implementation of Taguchi Method for Quality Improvement in High-Pressure Jet Assisted Turning Process, 11. International Scientific Conference "Advanced Production Technologies" - MMA, Novi Sad: Fakultet tehničkih nauka, 20-21 September, 2012, pp. 37-40, ISBN ISBN 978-86-7892-419 Kovač P., Pucovski (Pucovsky) V., Gostimirović M., Savković B., Šoos Lj., Ješić D.: Cutting force during grinding determined by regression analysis and genetic algorithms, 8. International Congress on Precision Machining - ICPM, Novi Sad: Faculty of Technical Sciences, University of Novi Sad, 1-3 October, 2015, pp. 13-18, ISBN 978-86-7892-742-3 Gostimirović M., Pucovski (Pucovsky) V., Kovač P., Sekulić M., Savković B.: An analytical study of energy partition in grinding - Invited paper, 8. International Congress on Precision Machining - ICPM, Novi Sad: Faculty of Technical Sciences, University of Novi Sad, 1-3 October, 2015, pp. 81-86, ISBN 978-86-7892-742-3 Sekulić M., Djurica D., Kovač P., Gostimirović M., Kramar D.: Using advanced CAM system in modern machining, 8. International Congress on Precision Machining - ICPM, Novi Sad: Faculty of Technical Sciences, University of Novi Sad, 1-3 October, 2015, pp. 27-32, ISBN 978-86-7892-742-3 Gostimirović M., Rodić D., Kovač P., Jesić D., Kulundžić N.: AN EXPERIMENTAL STUDY OF THE CUTTING FORCES IN CREEP-FEED GRINDING - Invited paper, 12. International Scientific Conference "Flexible Technologies" - MMA, Andrevlje: Faculty of Technical Sciences, 25-26 September, 2015, pp. 21-24, ISBN 978-86-7892-722-5 Kovač P., Savković B., Rodić D., Mankova I., Gostimirović M., Sekulić M.: Application of Artificial Intelligence in Modeling and Optimization of Machining processes, 17. International Conference "Research and Development in Mechanical Industry" – RaDMI, Zlatibor: SaTCIP (Scientific and Tehnical Center for Intellectual Poperty), 13-16 September, 2017, pp. 13-16, ISBN 978-86-6075-062-6	8	24.00
M33	Saopštenje sa međunarodnog skupa štampano u celini Saopštenje sa međunarodnog skupa štampano u celini ***Autori: Kovač, P., Sekulić S. Naziv: he Systems Approach to the use of the Response Surface methodology on the Quality of the Surface finisch in Turning Naziv skupa: VI International Conference on production Research ICPR’81 - Nisu povezani autori**greska** ***Autori: Milikić D., Kovač, P. Naziv: Temperature obradka u funkciji parametara obrade Naziv skupa: VI Seminar BIAM’82, - Nisu povezani autori**greska** ***Autori: Milikić D., Kovač, P. Naziv: Použitie temperatúry rezania v automatizácii riadenia vyrobnych procesov. Naziv skupa: Automatizácia projektovanie a rozvoj vyrobnych procesov v strojárstve - Nisu povezani autori**greska** ***Autori: Kovač, P., Sekulić S. Naziv: Vplyv polomeru zaoblenia hrotu sústružnického noža na trvanlivost‘ Naziv skupa: V Konferencia Nástroje’83 - Nisu povezani autori**greska** ***Autori: Rodić M., Kovač P., Todić V. Naziv: Banka údajov pre automatizované projektovanie náradia Naziv skupa: VI Konferencia Nástroje’86 - Nisu povezani autori**greska** ***Autori: Sekulić S., Kovač, P. Naziv: Korelácia medzi jednotlivymi pearametrami drsnosti obrobeného povrchu pri jemnom sústruženi Naziv skupa: 3. Sympózium INTERTRIBO '87 - Nisu povezani autori**greska** ***Autori: Kovač, P., Milikić D. Naziv: Opotrebenie rezného klina a drsnost‘ obrobeného povrchu pri čelnom frézovaní Naziv skupa: 3. Sympózium INTERTRIBO '87 - Nisu povezani autori**greska** ***Autori: Milikić D., Kovač, P. Naziv: Kontaktná teplota pri brúsení, funkcia parametrov rezania Naziv skupa: Konferencia Brúsenie II, - Nisu povezani autori**greska** ***Autori: Todić V., Kovač P., Rodić M. Naziv: Automatizácia vol‘by brúsneho kotúča v pružnom systeme technicko - ekonomickej optimalizácie technologickych procesov obrábania Naziv skupa: Brúsenie II - Nisu povezani autori**greska** ***Autori: Kovač, P. Naziv: Korišćenje metodologije faktornog plana eksperimenta sa pet nivoa za nalaženje hrapavosti obrađene površine pri čeonom glodanju Naziv skupa: Međunarodne konferencije AMST '87 - Nisu povezani autori**greska** ***Autori: Sekulić S., Kovač, P. Naziv: Korelacija između procenta nošenja i srednjeg aritmetičkog odstupanja profila od srednje linije obrađene površine pri završnoj obradi na strugu Naziv skupa: Međunarodne konferencije AMST ' 87 - Nisu povezani autori**greska** ***Autori: Kovač, P., Milikić D., Gostimirović M. Naziv: Temperature pri čeonom glodanju i mogućnosti njihovog korišćenja za ocenu obradljivosti i upravljanje procesom obrade Naziv skupa: X Savetovanja BIAM’88 - Nisu povezani autori**greska** ***Autori: Kovač, P., Milikić D., Gostimirović M. Naziv: Temperature pri čeonom glodanju i mogućnosti njihovog korišćenja za ocenu obradljivosti i upravljanje procesom obrade Naziv skupa: X Savetovanja BIAM’88 - Nisu povezani autori**greska** ***Autori: Sekulić S., Kovač, P. Naziv: Correlation between the maximum roughness height and the arithmetic deviation of the profile from the mean line of machined surface in surface grinding Naziv skupa: INTERGIND ' 88 - Nisu povezani autori**greska** ***Autori: Kovač, P., Milikić D., Gostimirović M. Naziv: Temperature pri čeonom glodanju i mogućnosti njihovog korišćenja za ocenu obradljivosti i upravljanje procesom obrade, Naziv skupa: IX međunarodnog savetovanja BIAM '88 - Nisu povezani autori**greska** ***Autori: P.Kovač, L Šiđanin, D.Milikić, M.Novović M.Gostimirović Naziv: Investigation of Chip Formation during Drilling: Naziv skupa: V Međunarodna naučno-stručna konferencija MMA´94, - Nisu povezani autori**greska** ***Autori: P.Kovač, L. Sidjanin Naziv: Investigation of Chip Formation During Milling, Naziv skupa: The 13th International Conference on Production Research - Nisu povezani autori**greska** ***Autori: L. Sidjanin, P. Kovač, M. Novović Naziv: Fracture Mechanisms on Ductile Iron in Chip Formation Process, Naziv skupa: Manufacturing Engineering: 2000 and Beyond, Proceedings of International Manufacturing Engineering Conferences - Nisu povezani autori**greska** ***Kovač P., Hodolič J.: Monitorovanie procesu obrabania a skutočne opotrebenie nastroja Naziv skupa: International Congress - Machine tools, automation and robotics in mechanical engineering -MATAR Praha'96 - Nije povezan skup**greska** ***Kovač P., Hodolič J.: Recommendations for the operation limits of monitoring sistem setting Naziv skupa: Zborník vedeckych prác Nové trendy v strojárstve na prahu tretieho tisícročia - Nije povezan skup**greska** ***Autori: L. Sidjanin, P. Kovač, J. Fišl Naziv: Fracture Mechanisms in Aaustempered Ductile Iron Naziv skupa: CSME FORUM 1998: The Mechanisms of Solids and Structures Materials Technology - Nisu povezani autori**greska** ***Autori: P. Kovač, L. Sidjanin Naziv: Machining, Surface Integrity and Chip Forming Process, Naziv skupa: CSME FORUM 1998: Manufacturing, Automation and Robotics - Nisu povezani autori**greska** ***Kovač P., Hodolič J.: Contribution to Static Limits of the Process Monitoring Setting Naziv skupa: Pacific Conference on Manufacturig and Managament - Nije povezan skup**greska** ***Autori: Šiđanin L., Kovač P., Fišl J., Novović M. Naziv: Microscopic Study of Chip Formation Process Novi Sad, 1998 Naziv skupa: 3 rd International Symposium Iterdisciplinary Regional Research - Nisu povezani autori**greska** ***Autori: Kovač P., Šiđanin L., Dimovski S., Šiđanin D Naziv: Istraživanje procesa nastajanja strugotine pri obradi kalajne bronze glodanjem 1998 Naziv skupa: 27 Savetovanje proizvodnog mašinstva Jugoslavije sa međunarodnim učešćem - Nisu povezani autori**greska** ***Autori: Kovač, P. Naziv: Cutting Force Components Function of Cutting Conditions and Tooth Run Out Naziv skupa: 2nd, Intnternational Conference On Development of Metal Cutting, DMC΄98 - Nisu povezani autori**greska** ***Autori: Kovač, P., Dimovski S., Šiđanin L.,Sekulić M.: Naziv: Cutting Force During Increased Speed and High Speed Machining Naziv skupa: Int X Workshop on Supervising and Diagnostic of Machining Systems Innovative and Integrated Manufacturing - Nisu povezani autori**greska** ***Autori: Sekulić S., Kovač, P., Vuksanović S. Naziv: Mathematical Models for Determination of Cutting Force Components by Face Milling, enčin.1999, 54-58 Naziv skupa: Internatioal Conf Tools΄99, - Nisu povezani autori**greska** ***Autori: Kovač, P., Šiđanin L. Naziv: Surface Layer and Chip Formation Process During Machining Nodular Iron Naziv skupa: VII International Symposium INTERTRIBO 99 - Nisu povezani autori**greska** ***Autori: Kovač, P., Uzelac S. Naziv: Determination of Optimal Values of Cutting Process Parameters During Face Millng Naziv skupa: International Conference Technologia ΄99 - Nisu povezani autori**greska** ***Autori: P. Kovač, S. Dimovski, L. Sidjanin, M. Sekulić Naziv: Cutting Forces During Increased Speed and High Speed Machining Naziv skupa: X Workshop on Supervising and Diagnostic of Machining Systems, Inovative and Integrated Manufacturing - Nisu povezani autori**greska** ***Autori: P. Kovač, L. Sidjanin Naziv: Surface Layer and Chip Forming Process During Machining Nodular Cast Iron Naziv skupa: VIIth International Symposium (INTERTRIBO´99), Tribological Problems in Exposed Friction Systems - Nisu povezani autori**greska** ***Autori: Kovač P., Dimovski S., Sekulić M. Naziv: Cutting force during increased speed machining Naziv skupa: Proceedings of Internacional Conference Machining 2000 - Nisu povezani autori**greska** Baloš S., Kovač P., Knežević M., Fišl J., Šiđanin (Sidjanin) L.: Deformation of soft particles in metal matrix composites, 12. International Scientific Conference CO-MAT-TECH, Trnava, 14-15 October, 2004, pp. 70-75 Baloš S., Rajnović D., Knežević M., Šiđanin (Sidjanin) L., Kovač P.: Deformation of graphite under different loads, 1. Scientific conference with international participation: Manufacturing and management in 21st century, Ohrid, 16-17 September, 2004, pp. 121-125, ISBN 9989-2325-0-4 Baloš S., Rajnović D., Knežević M., Šiđanin (Sidjanin) L., Kovač P.: Deformation of Graphite Nodules under Different Loads, 1. Scientific conference with international participation: Manufacturing and management in 21st century, Ohrid, 16-17 September, 2004, pp. 121-125 Baloš S., Šiđanin (Sidjanin) L., Kovač P.: Soft particles deformation in metal matrix composites, 2. Internacional Conference on Engineering and Environment - ICEE, Novi Sad, 18-20 May, 2005 ***Autori: Kovač, P., Šiđanin, L. Naziv: Istraživanje procesa nastajanja strugotine pri obradi legura na bazi aluminijuma Naziv skupa: Međenarodna konferencija MMA 2006 - Nisu povezani autori**greska** ***Autori: Kovač P., Radonjić S Naziv: Proizvodi od reciklirane plastika proizvedeni u domaćim pogonima Naziv skupa: Međenarodna konferencija MMA 2006 - Nisu povezani autori**greska** ***Autori: P.Kovač, L.Šiđanin Naziv: Investigation of chip forming process during aluminium machining Naziv skupa: 9th International Scientific Conference on Flexible Technologies - Nisu povezani autori**greska** ***Autori: Sekulić Milenko., Kovač Pavel. Naziv: The Influence of Machining Conditions Change on Cutting Forces in Face Milling Naziv skupa: PSU-UNS International Conference of Engineering and Environment ICEE 2007 - Nisu povezani autori**greska** ***Autori: Millikić Dragoje, Kovač Pavel, Pižurica Nikola Naziv: Internet data base for optimal cutting conditions setting Naziv skupa: PSU-UNS International Conference of Engineering and Environment ICEE 2007 - Nisu povezani autori**greska** ***Autori: Sekulić M., Kovač P. Naziv: The influence of machining conditions change on cutting forces in face milling Naziv skupa: PSU-UNS International Conference on Engineering and Environment -ICEE-2007 - Nisu povezani autori**greska** ***Autori: Kovač, P., Šiđanin L. Naziv: The Chip Toot Deformation of Difficult to Machine Materials Naziv skupa: TMT"07 - Nisu povezani autori**greska** ***Kovač P.: Autori: Kovač, P. Naziv: In Process Monitoring System for Milling Machine Naziv časopisa: Monografija Machine Design , Monografija Machine Design, 2008, pp. 259-262, ISSN ISBN 978-86-7892-105- Nije povezan skup**greska** Sovilj B., Brezočnik M., Sovilj-Nikić I., Đokić V., Radonjić S., Kovač P.: Identificatiion of tribological processes during the profile processing using genetic algorithm, 11. International Conference on Tribology - SERBIATRIB, Beograd: Mašinski fakultet, 13-15 May, 2009, pp. 349-354, ISBN 978-86-7083-659-4 Kovač P., Serdar B., Savković B., Gostimirović M.: Computer analysis of cutting force action on cutting tool during turning, 10. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Fakultet tehnickih nauka, 9-10 October, 2009, pp. 44-47, ISBN 978-86-7892-223-7 Gostimirović M., Kovač P., Sekulić M.: Initiation of water jet technology in manufacturing industry, 4. Internacional Conference on Engineering Technologies (ICET), Novi Sad: Faculty of technical sciences, 28-30 April, 2009, pp. 249-253, ISBN 978-86-7892-227-5 Sekulić M., Gostimirović M., Jurković Z., Kovač P.: Calibration of cutting force coefficients in face milling, 7. International Scientific Conference on Production Engineering - RIM, Kairo: Faculty of Technical Engineering, 26-3 September, 2009, pp. 1-6 Sekulić M., Kovač P., Gostimirović M., Jurković Z., Savković B.: The thrust force structure in drilling, 10. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, 9-10 October, 2009, pp. 72-75, ISBN 978-86-7892-223-7 Sekulić M., Gostimirović M., Kovač P., Savković B.: Employing a virtual instrumentation as a teching tool for a cutting force monitoring system in drilling, 13. International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" - TMT, Hammamet: University of Zenica, Faculty of Mechanical Engineering, 16-21 October, 2009, pp. 9-12, ISBN 1840-4944 Gostimirović M., Kovač P., Sekulić M., Savković B.: Inverse task solution of heat conduction in grinding process, 10. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 9-10 October, 2009, pp. 37-39, ISBN 978-86-7892-223-7 Kovač P., Savković B., Mijić A., Sekulić M.: Modeling of cutting forces in face milling, 10. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 9-10 October, 2009, pp. 40-43, ISBN 978-86-7892-223-7 Kovač P., Šiđanin (Sidjanin) L., Rajnović D., Savković B., Wannasin J.: The chip formation process of Al-Cu alloy cast conventionally and in semi solid state, 4. Internacional Conference on Engineering Technologies (ICET), Novi Sad: Faculty of Technical Sciences, 28-30 April, 2009, pp. 327-331, ISBN 978-86-7892-227-5, UDK: 62:001.8(082) ***Kovač P., Sovilj B., Brezočnik M., Sovilj-Nikić I.: Modelling of tool life function during hob milling- Nije povezan skup**greska** Sovilj B., Radonjic S., Radonjić S., Kovač P., Sovilj-Nikić I.: Analysis gear characteristics and seration processing in "Kolubara - Metal" factory, 10. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 9-10 October, 2009, pp. 147-150, ISBN 978-86-7892-223-7 Sekulić M., Kovač P., Gostimirović M., Hadžistević M., Savković B.: Prediction of cutting forces in face milling of hardened steel, 1. International Conference on Sustainable Life in Manufacturing - SLIM, Egirdir: Suleyman Demirel University, CAD/CAM Research and Application Center; University of Ljubljana, Faculty of Mechanical Engineering, 24-25 June, 2010, pp. 36-39 Kovač P., Gostimirović M., Savković B., Sekulić M.: Finite element method analysis of temperature distribution in turning, 13. International Scientific Conference "Mechanical Engineering", Bratislava: Slovak University of Technology in Bratislava, 21 October, 2010, pp. 61-67, ISBN 978-80-227-3304-5 Kovač P., Savković B., Serdar B., Gostimirović M., Sekulić M.: Computer Analysis of Heat Flux in the Cutting Zone, 5. PSU-UNS International Conference: Energy and the Environment, Phuket: Prince of Songkla University, Faculty of Engineering, Hat Yai, Songkhla, Thailand 90112, 2-3 May, 2011, pp. 661-664, UDK: http://www.icet.eng.psu.ac.th Paper id: 243 , Password: 3b4f73 Sekulić M., Gostimirović M., Kovač P., Savković B., Jurković Z.: Optimization of Cutting Parameters Based on Tool Chip Interface temperature in Turning Process using Taguchi`s Method, 15. International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" - TMT, Prague: Faculty of Mechanical Engineering in Zenica, Fakultetska 1, Zenica, B&H, 12-18 September, 2011, pp. 69-72, ISBN ISSN 1840-4944 Gostimirović M., Kovač P., Sekulić M., Savković B.: THE RESEARCH OF DISCHARGE ENERGY IN EDM PROCESS, 34. International Conference on Production Engineering, Niš: Faculty of Mechanical Engineering, University of Niš, 28-30 September, 2011, pp. 417-420, ISBN 978 – 86 – 6055 – 01 Gostimirović M., Kovač P., Sekulić M., Savković B.: INFLUENCE OF DISCHARGE PARAMETERS ON THE PERFORMANCE OF ELECTRICAL DISCHARGE MACHINING, 8. International Scientific Conference on Production Engineering - RIM, Velika Kladuša: University of Bihać, Technical Faculty, 29-1 September, 2011, pp. 175-178 Sekulić M., Hadžistević M., Jurković Z., Kovač P., Gostimirović M.: Application of Taguchi Method in the Optimization of Face Milling Parameters, 34. International Conference on Production Engineering, Niš: Faculty of Mechanical Engineering, University of Niš, 28-30 September, 2011 Pucovski (Pucovsky) V., Kovač P., Savković B.: Cutting Temperature During Face Milling Predicted by the use of Genetic Algorithm, 12. International Conference "Technology", Bratislava: Slovak University of Technology in Bratislava, 13 September, 2011, pp. 333-337, ISBN 978-80-227-3545-2 Sekulić M., Rodić D., Kovač P., Gostimirović M., Savković B.: ANFIS predicting of the cutting forces in face milling hardened steel, 2. International Conference on Sustainable Life in Manufacturing - SLIM, Fiesa: TAVO, Slovene Society for Abrasive Water Jet Technology, University of Ljubljana, Slovenia, 25-27 September, 2011, pp. 346-349, ISBN 978-961-6536-57-8 Brkljač N., Simić R., Kovač P., Brkljač B.: FEM in function of PNS - Applied in deriving approximate formula for calculation of theoretical SCF in butt weld joints, 11. International Scientific Conference MMA, Novi Sad: Faculty of Technical Sciences, Department of Production Engineering, 20-21 September, 2012, pp. 423-426, ISBN 978-86-7892-419-4 Sekulić M., Kramar D., Kovač P., Gostimirović M., Kopač J.: Application of Taguchi Method in The Optimization of High-Pressure Jet Assisted Turning Parameters, 3. International Conference on Sustainable Life in Manufacturing - SLIM, Istanbul: CAD/CAM Research and Application Center, Süleyman Demirel University, Turkey; LABOD, Laboratory for Cutting, University of Ljubljana, Slovenia, 2-5 October, 2012, pp. 7-10, ISBN 978-9944-452-61-8 Radonjić S., Mitrović A., Kovač P.: Defining New Processing Parameters in Laser Cutting, 16. International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" - TMT, Dubai: University of Zenica, 10-12 September, 2012, pp. 47-50, ISBN 1840-4944 Gostimirović M., Pucovski (Pucovsky) V., Kovač P., Šooš Lj., Rodić D., Savković B.: Modeling of Discharge Energy in EDM Process by the use of genetic Algorithms, 11. International Scientific Conference "Advanced Production Technologies" - MMA, Novi Sad: Fakultet tehničkih nauka-Novi Sad, 20-21 September, 2012, pp. 13-16, ISBN 978-86-7892-419 Gostimirović M., Rodić D., Kovač P., Mankova I., Beno J., Pucovski (Pucovsky) V., Sekulić M.: PREDICTION OF SURFACE ROUGHNESS USING NEURAL FUZZY SYSTEMS IN ELECTRICAL DISCHARGE MACHINING, 11. International Scientific Conference "Advanced Production Technologies" - MMA, Novi Sad: Fakultet tehničkih nauka, 20-21 September, 2012, pp. 17-20, ISBN 978-86-7892-419-4 Sovilj B., Sovilj-Nikić I., Gajić V., Kovač P., Kovač P., Pejić V., Sovilj-Nikić S., Varga G.: The parameters of gear teeth surface topography machined by coated and uncoated model hob milling tools, 7. International Symposium about machine and industrial design in mechanical engineering - KOD 2012, Balatonfured: Faculty of Technical Sciences, 24-26 May, 2012, pp. 467-472 Kovač P., Radonjić S., Sovilj B., Mitrović A., Sovilj-Nikić I.: Determining The Processing Parameters for steel AISI 6150 in Laser Cutting, 11. International Scientific Conference "Advanced Production Technologies" - MMA, Novi Sad: Fakultet tehničkih nauka, 20-21 September, 2012, pp. 33-36, ISBN 978-86-7892-419 Sekulić M., Hadžistević M., Kovač P., Gostimirović M., Jurković Z.: Current Trends In Sustainable Product Design, 11. International Scientific Conference "Advanced Production Technologies" - MMA, Novi Sad: Fakultet tehničkih nauka, 20-21 September, 2012, pp. 391-394, ISBN 978-86-7892-419 Kovač P., Gadus J., Palkova Z., Savković B., Gostimirović M.: Biogas Powered Fuel Cells, 1. Scientific and Specialist Conference "Renewable and Available Sources of Energy", Andrevlje: Fakultet tehničkih nauka, 9-11 October, 2012, pp. 206-211, ISBN 978-86-7892-441-5 Kiedrowicz M., Palkova Z., Kovač P.: Status and Prospects from Renewable Energy Sources Development in Poladn Relating to the European Union, 1. Scientific and Specialist Conference "Renewable and Available Sources of Energy", Andrevlje: Fakultet tehničkih nauka, 9-11 October, 2012, pp. 42-47, ISBN 978-86-7892-441-5 Gostimirović M., Rodić D., Kovač P., Pucovski (Pucovsky) V., Savković B.: Application of Neuro-Fuzzy Systems and Genetic Programming for Modelling Surface Roughnessin Electrical Discharge Machining, 11. International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology - DEMI, Banja Luka: University of Banja Luka, Faculty of Mechanical Engineering, 30-1 May, 2013, pp. 307-312, ISBN 978-99938-39-46-0 Kovač P., Pucovski (Pucovsky) V., Palkova Z., Nagy L., Savković B.: Solar Energy Dependance Modeled With Evolutionary Algorithms, 19. International Conference "Engineering for Environment Protection" – TOP, Časta-Papiernička: Faculty of Mechanical Engineering STU in Bratislava, 11-13 June, 2013, pp. 145-150, ISBN 978-80-227-3955-9 Prica M., Kovač P., Dalmacija M., Dalmacija B., Adamović (Majkić) S., Tomašević D.: Lead Leaching Mechanism from Mixtures Stabilized with Cardboard Mill Sludge, 19. International Conference "Engineering for Environment Protection" – TOP, Časta-Papiernička: Faculty of Mechanical Engineering STU in Bratislava, 11-13 June, 2013, pp. 291-296, ISBN 978-80-227-3955-9 Prica M., Kovač P., Dalmacija M., Dalmacija B., Adamović (Majkić) S., Krčmar D.: Stabilization Degree Evaluation of Stabilized Products with Cardboard Mill Sludge, 19. International Conference "Engineering for Environment Protection" – TOP, Časta-Papiernička: Faculty of Mechanical Engineering STU in Bratislava, 11-13 June, 2013, pp. 297-303, ISBN 978-80-227-3955-9 Sekulić M., Kramar D., Kopač J., Gostimirović M., Kovač P.: Optimization Cutting Parameters Based on Cutting Temperature in HPJA Turning Process Using Taguchi s Method, 11. International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology - DEMI, Banja Luka: University of Banja Luka, Faculty of Mechanical Engineering, 30-1 May, 2013, pp. 487-492, ISBN 978-99938-39-46-0 Kovač P., Sekulić M., Gostimirović M., Savković B., Kopač J.: Concept of sustainable production, 1. Scientific and Specialist Conference "Ecology in service of sustainable development", Novi Sad: MTMA–MEĐUNARODNA TEHNOLOŠKO MENADŽERSKA AKADEMIJA, Trg Dositeja Obradovića 7, Novi Sad, 26-28 September, 2013, pp. 1-8, ISBN 978–86–7892–441–5 Pucovski (Pucovsky) V., Gostimirović M., Kovač P., Rodić D., Sekulić M.: Experimental Determination of Abrasive Water Jet Curvature and its Modeling Using the Genetic Programming, 35. International Conference of Production Engeneering - ICPE, Kopaonik: Faculty of Mechanical and Civil Engineering, 25-28 September, 2013, pp. 327-330, ISBN 978-86-82631-69-9 Adamović (Majkić) S., Kovač P., Prica M., Novaković D., Dalmacija B., Rajić Lj., Krčmar D.: The kinetics of organic substances removal from the waste offset printing developer by the electrocoagulation/flotation with a combination of electrodes, 20. Conference Engineering of Environment Protection - TOP2014, Bratislava: Slovak University of Technology in Bratislava, 10-12 June, 2014, pp. 1-6, ISBN 978-80-227-4174-3 Prica M., Kovač P., Adamović (Majkić) S., Radonić (Jakšić) J., Turk Sekulić M., Maletić S., Adamović D.: Assessing the effects of nickel from printed graphic products waste on the soil after their disposal, 20. Conference Engineering of Environment Protection - TOP2014, Bratislava: Slovak University of Technology in Bratislava, 10-12 June, 2014, pp. 411-416, ISBN 978-80-227-4174-3 Rodić D., Gostimirović M., Kovač P., Mankova I., Pucovski (Pucovsky) V.: Predicting of machining quality in electric discharge machining using intelligent optimization techniques, 2. International Conference on Recent Trends in Mechanical Engineering - RTME, Dubai, 4-5 April, 2014 Sovilj-Nikić I., Sovilj B., Kovač P., SOVILJ-NIKIĆ S., VARGA G., LEGUTKO S., Gajić V.: AUTOMATION OF MODELING AND DESIGN OF TOOLS FOR GEARING BY RELATIVE ROLLING, 8. International Symposium - KOD - Machine and Industrial Design in Mechanical Engineering, Balatonfured: Faculty of technical Sciences-Novi Sad, Faculty of Mechanical Engineering, STU Bratislava, 12-15 June, 2014, pp. 221-224, ISBN ISBN 978-86-7892-615 Gostimirović M., Kovač P., Mankova I., Sekulić M., Savković B.: MODULAR DESIGN OF MACHINE TOOLS FOR WATER JET MACHINING, 8. International Symposium - KOD - Machine and Industrial Design in Mechanical Engineering, Balatonfured: Faculty of technical Sciences-Novi Sad, Faculty of Mechanical Engineering, STU Bratislava, 12-15 June, 2014, pp. 425-428, ISBN ISBN 978-86-7892-615 Savković B., Kovač P., Rodić D., Gostimirović M., Pucovski (Pucovsky) V., Holešovský F.: Application of anfis for modeling and prediction of the surface roughness for steel dificult to machining, 8. International Scientific Conference on Mechanical Engineering - COMEC, Cayo Santa Maria: Faculty of Mechanical Engineering, Universidad Central “Marta Abreu” de Las Villas, CUBA, 17-20 November, 2014, pp. 1-11, ISBN 978-959-250-997-9 Kovač P., Rodić D., Gostimirović M., Ješić D., Kirin S., Cvijanović N.: Modelling of the cutting forces during wear process by using neuro-fuzzy system and fuzzy logic, 16. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: UNIVERSITY OF NOVI SAD - FACULTY OF TECHNICAL SCIENCES DEPARTMENT OF INDUSTRIAL ENGINEERING AND MANAGEMENT, 15-17 October, 2014, pp. 45-48, ISBN 978-86-7892-652 Sekulić M., Kovač P., Gostimirović M., Hadžistević M., Jurković Z.: PREDICTION OF THE MAIN CUTTING FORCE IN DRILLING BY KIENZLE EQUATION, 18. International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" - TMT, Budimpešta: Faculty of Mechanical Engineering, 10-12 September, 2014, pp. 5-18, ISBN 1840-4944 Pucovski (Pucovsky) V., Rodić D., Kovač P., Savković B., Gostimirović M., Rzadkiewicz S., Rokosz K.: Artificial intelligence in machining processes, 11. Konferencja Studentów i Młodych Pracowników Nauki Wydziału Mechanicznego, Koszalin: Politechnika Koszalińska, 19-25 May, 2014, pp. 217-224, ISBN 978-83-7365-359-7 Šoos Lj., Kovač P., Matuš M., Križan P., Beniak J.: DYNAMIC ANALYSIS SPINDEL-BEARINGS SYSTEM (SBS) OF THE HEADSTOCK MACHINE TOOLS, 14. Conference on Applied Mathematics - APLIMAT, Bratislava: Faculty of Mechanical Engineering, Slovak University of Technology in Bratislava, 3-5 February, 2015, pp. 1-5 Gostimirović M., Kovač P., Ildiko M., Savković B., Sekulić M.: Experimental Research on the Surface Roughness of Creep-Feed Grinding Process, 7. PSU-UNS International Conference on Engineering and Technology - ICET, Phuket: Prince of Songkla University, Faculty of Engineering Hat Yai, Songkhla, 19-20 June, 2015, pp. 104-107 Kovač P., Petrović V., Pucovski (Pucovsky) V., Birčanin B., Savković B., Gostimirović M., Rokosz K.: Modelling of Energy Efficiency Cart of Solar Energy Collectors, 7. PSU-UNS International Conference on Engineering and Technology - ICET, Phuket: Prince of Songkla University, Faculty of Engineering Hat Yai, Songkhla, 19-20 June, 2015, pp. 151-154 Sekulić M., Kovač P., Gostimirović M., Hadžistević M., Rodić D., Pucovski (Pucovsky) V.: Modeling of the Main Cutting Force in Face Milling Hardened Steel by Rotatable Central Composite Design of Experiments, 12. International Scientific Conference "Flexible Technologies" - MMA, Andrevlje: Faculty of Technical Sciences, 25-26 September, 2015, pp. 13-16, ISBN 978-86-7892-722-5 Kovač P., Rodić D., Pucovski (Pucovsky) V., Savković B., Gostimirović M., Sekulić M., Mankova I.: Application of Intelligent Techniques and Regression Analysis for Modelling Cutting Temperature in Face Milling, 23. ABCM International Congress of Mechanical Engineering - COBEM, Rio de Janeiro: Brazilian Society of Mechanical Sciences and Engineering - ABCM, 6-11 December, 2015, pp. 1-4 Kovač P., Savković B., Gostimirović M., Rodić D., Holešovský F., Sekulić M.: Small Scale agro Slurry Biogas Plants for medium - sized farms , 9. International Scientific Conference XXI Century Environment - MASXXI, Cayo Santa Maria: Faculty of Mechanical Engineering, UCLV, 24-27 November, 2015, pp. 1-10, ISBN 978-959-312-031-9 Ješić D., Kovač P., Gvozdenović N., Rodić D., Aleksić Ž.: FRICTION AND WEAR IN THE SLIDING CONTACT WITH DIFERENT COATINGS, 8. Međunarodni naučni skup Savremeni materijali, Banja Luka: Academy of Sciences and Arts of the Republic of Srpska, 6-7 September, 2015, pp. 573-578, ISBN 978-99938-21-80-9 Šoos Lj., Ondruška J., Kovač P., Čačko V.: Development of Modular Flood Barrier Concept Made from Recycled Plastic, Applied Mechanics and Materials, 2015, Vol. 832, No. 1, pp. 168-173, ISSN 1662-7482, 21. TOP 2015-Engineering of environment protection, Bratislava: Trans Tech Publications Ltd, Switzerland, 23-25 June, 2015, pp. 168-173, ISBN 978-3-0357-1015-1 Ješić D., Kovač P., Savković B., Gostimirović M., Sovilj-Nikić I.: Use of Sun-and-Planet Mechanism in Educative System, 9. The 9th International Symposium - KOD 2016 - Machine and Industrial Design in Mechanical Engineering, Balatonfured: Faculty of Technical Sciences, Novi Sad, 9-12 June, 2016, pp. 59-62, ISBN 978-86-7892-821-5 Savković B., Kovač P., Liska K., Mankova I., Sekulić M.: Modelling of surface roughness using the DoE plans of the first order and artificial neural networks in face milling, 9. International Scientific Conference on Mechanical Engineering - COMEC, Las Villas: Faculty of Mechanical Engineering, Universidad Central “Marta Abreu” de Las Villas, CUBA, 14-17 November, 2016, pp. 1-14, ISBN 978-959-312-216-0 Sekulić M., Pejic V., Kovač P., Gostimirović M., Savković B.: Optimization of cutting parameters based on material removal rate in ball-end milling process, 9. International Scientific Conference on Mechanical Engineering - COMEC, Las Villas: Faculty of Mechanical Engineering, Universidad Central “Marta Abreu” de Las Villas, CUBA, 14-17 November, 2016, pp. 1-13, ISBN 978-959-312-216-0 Kovač P., Rodić D., Gostimirović M., Savković B., Ješić D.: Application of adaptive neuro fuzzy systems for modeling grinding process, 6. International Conference on Information Science and Technology (ICIST), Kopaonik: Society for Information Systems and Computer Networks, 29-2 February, 2016, pp. 247-250, ISBN 978-86-85525-18-6 Kovač P., Kirin S., Savković B., Ješić D., Golubović D.: Optimal operating conditions for manure biogas plants in Serbia, 9. International Symposium on Exploitation of Renewable Energy Sources and Efficiency - EXPRES, Subotica: Inženjersko-tehničko udruženje vojvođanskih Mađara, 30-1 March, 2017, pp. 69-74, ISBN 978-86-919769-1-0 Kovač P., Ješić D., Savković B., Gostimirović M., Gvozdenović N.: Research of tribological characteristics of various oil applied in the tribological system, 15. International Conference on Tribology - SERBIATRIB, Kragujevac: University of Kragujevac, Faculty of Engineering and Serbian Tribology Society, 17-19 May, 2017, pp. 481-486, ISBN 978-86-6335-041-0 Aleksić Ž., Kovač P., Nedić B., Ješić D.: IN VESTIGATION OF TRIBOLOGICAL CHARACTERISTICS OF THE SAMPLES TAKEN FROM VALVE ON GAS PIPELINE SYSTEM J.P.”SERBIAGAS”, 15. International Conference on Tribology - SERBIATRIB, Kragujevac: University of Kragujevac, Faculty of Engineering and Serbian Tribology Society, 17-19 May, 2017, pp. 239-243, ISBN 978-86-6335-041-0 Gostimirović M., Kovač P., Sekulić M., Milošević M., Lukić D.: INVERSE THERMAL MODELING OF THE ELECTRICAL DISCHARGE MACHINING, 13. International Conference on Accomplishments in Mechanical and Industrial Engineering - DEMI, Banja Luka: University of Banja Luka, Faculty of Machanical Engineering, 26-27 May, 2017, pp. 37-42, ISBN 978-99938-39-73-6 Kovač P., Kulundžić N., Mitrović A., Savković B., Gostimirović M.: FEM milling tools temperature measurement, modelling and simulation, 8. PSU-UNS International Conference on Engineering and Technology - ICET, Novi Sad: Faculty of Technical Sciences, Novi Sad, 8-10 June, 2017, pp. 1-4, ISBN 978-86-7892-934-2 Pucovski (Pucovsky) V., Sekulić M., Gostimirović M., Kovač P., Savković B., Jovanović D.: CUTTING FORCES DURING ULTRASONIC ASSISTED TURNING OF HARD TO MACHINE MATERIAL SPM10, 8. International Scientific Conference Research and development of mechanical elements and systems - IRMES, Trebinje: University of Montenegro, Faculty of Mechanical Engineering, 7-9 September, 2017, pp. 291-296, ISBN 978-9940-527-53-2 Golubović D., Kovač P., Ješić D., Savković B., Sarjanović D.: Ecomic analyze and energetic efficiency of small hydroplant, 10. International Symposium on Exploitation of Renewable Energy Sources and Efficiency - EXPRES, Subotica: Inženjersko-tehničko udruženje vojvođanskih Mađara, 5-7 April, 2018, pp. 34-38, ISBN 978-86-919769-3-4 Mitrović A., Kovač P., Kulundžić N., Savković B., Mankova I.: 3D end milling finite element thermal analysis, MATEC Web of Conferences, 2018, Vol. 17, No. 1, pp. 1-4, ISSN 2261-236X, 17. IMT Oradea, Oradea: Fascicle of Management and Technological Engineering, 31-1 May, 2018, pp. 1-4, ISBN 978-606-10-1537-5 Gostimirović M., Pucovski (Pucovsky) V., Rodić D., Sekulić M., Kovač P.: A neural network model for predicting jet trajectory in the abrasive water jet machining, 13. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 28-29 September, 2018, pp. 21-24, ISBN 978-86-6022-094-5 Kovač P., Tarić M., Rodić D., Nedić B., Savković B., Ješić D.: RSM and Neural Network Modeling of Surface Roughness During Turning Hard Steel, 18. International Symposium for Production Research - ISPR, Beč: Springer Nature Switzerland, 28-31 August, 2018, pp. 16-25, ISBN 978-3-319-92266-9 Rodić D., Gostimirović M., Kovač P., Sekulić M., Savković B.: Principle of electrical discharge machining of non-conductive zirconia ceramics, 13. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, Department of Production Engineering, 28-29 September, 2018, pp. 33-36, ISBN 978-86-6022-094-5, UDK: 621.7/.9 Gostimirović M., Rodić D., Kovač P., Sekulić M., Pejić V.: An optimal energy control strategy for electrical discharge machining, 37. International Conference of Production Engineering - ICPE-S, Kragujevac: University of Kragujevac, 25-26 October, 2018, pp. 91-94, ISBN 978-86-6335-057-1 Šooš L., Bábics J., Beniak J., Križan P., Kovač P., Matúš M.: Design and testing functional model compacting machine for produce new shape biofuels, 9. TSME International Conference on Mechanical Engineering, Phuket: Department of Mechanical Engineering, Faculty of Engineering, Thammasat University Khlongluang, Pathumthani 12120 THAILAND, 11-14 December, 2018, pp. 1-7 Kovač P., Kirin S., Mirjanić D., Ješić D., Savković B., Sarjanović D.: Operating Economics of Biogas Plant with Cattle Farming, 8. International Conference "Economics and Management - Based on New Technologies" (EMoNT), Vrnjačka Banja: SaTCIP (Scientific and Technical Center for Intellectual Property) Ltd., 25-28 June, 2018, pp. 262-267, ISBN 978-86-6075-064-0 Šooš L., Beniak J., Križan P., Kovač P., Matúš M., Ploskuňáková L.: Modular conception of briquetting press, 26. European Biomass Conference and Exhibition, Copenhagen: ETA-Florence Renewable Energies, 14-17 May, 2018, pp. 891-895 Janjatović P., Savković B., Kovač P., Baloš S., Dramićanin M., Zabunov I.: THE INFLUENCE OF WELDING SPEED AND CURRENT IN WELD SHAPE IN FORCE ARC PROCESS, 4. The IIW South-East European Welding Congress, Beograd, 10-13 October, 2018, pp. 1-5, ISBN 978-86-82585-13-8 Aleksić A., Sekulić M., Savković B., Gostimirović M., Kamenko I., Kovač P.: Optimization of cutting parameters by nature-inspired algorithms, 14. Međunarodni naučno-stručni skup o dostignućima elektrotehnike, mašinstva i informatike - DEMI, Banja Luka: University of Banja Luka, 24-25 May, 2019, pp. 51-56, ISBN 978-99938-39-85-9 Kovač P., Savković B., Rodić D., Aleksić A., Gostimirović M., Sekulić M., Kulundžić N.: Modelling and Optimization of Surface Roughness Parameters of Stainless Steel by Artificial Intelligence Methods, 19. International Symposium for Production Research - ISPR, Beč: Springer Nature Switzerland, 28-30 August, 2019, pp. 3-12, ISBN 978-3-030-31342-5 Savković B., Kovač P., Štrbac B., Pokusova M., Kulundžić N.: Modelling of the High-Chromium Cast Iron Surface Roughness, 20. International Symposium for Production Research - ISPR, Antalya: Springer Nature Switzerland, 24-27 September, 2020, pp. 523-534, ISBN 978-3-030-62783-6 Rodić D., Gostimirović M., Sekulić M., Savković B., Aleksić A., Kovač P.: Surface integrity in electrical discharge machining of non-conductive ceramic , 10. International Scientific Conference "Development in Machining Technology" - DiM, Cracow: Cracow University of Technology, 18-19 May, 2022, pp. 81-90, ISBN 978-80-553-4133-0 Rodić D., Gostimirović M., Sekulić M., Savković B., Aleksić A., Kovač P.: Tool wear rate optimization in PMEDM using graphite powder by Taguchi method for titanium alloy, 11. International Scientific Conference "Development in Machining Technology" - DiM, Cracow: Cracow University of Technology, 27-28 April, 2023, pp. 1-8, ISBN 978-80-553-4133-0 Rodić D., Gostimirović M., Sekulić M., Savković B., Aleksić A., Kovač P.: Effect of dielectric fluid with graphite powder on the electrical discharge machining of non-conductive ceramic, 12. International Scientific Conference "Development in Machining Technology" - DiM, Cracow: Cracow University of Technology,, 25-26 April, 2024, pp. 1-10, ISBN 978-80-553-4421-8 Savković B., Rodić D., Sekulić M., Kovač P., Aleksić A., Kosanović A.: DEVELOPMENT OF A MEASUREMENT-ACQUISITION SYSTEM FOR MEASURING CUTTING FORCES AND TEMPERATURES USING VIRTUAL INSTRUMENTATION , 15. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 24-26 September, 2024, pp. 25-30, ISBN 978-86-6022-681-7	126	126.00
M34	Saopštenje sa međunarodnog skupa štampano u izvodu Saopštenje sa međunarodnog skupa štampano u izvodu Baloš S., Kovač P., Knežević M., Fišl J., Šiđanin (Sidjanin) L.: Deformation of soft particles in metal matrix composites, 12. International Scientific Conference CO-MAT-TECH, Trnava, 14-15 October, 2004, pp. 14-14 Kovač P., Serdar B., Savković B.: COMPUTER ANALYSIS OF THE TEMPERATURE PHENOMENA DURING TURNING, 11. International Symposium of Interdisciplinary Regional Research (ISIRR), Szeged, 13-15 October, 2010, pp. 155-155 Sovilj B., Kovač P., Sovilj-Nikic S., Savkovic T., Sovilj-Nikić I.: Legislative and Regulatory Approaches for e-Waste Recycling, 11. International Symposium of Interdisciplinary Regional Research (ISIRR), Szeged, 13-15 October, 2010, ISBN 978-963-508-600-9 Kovač P., Šiđanin (Sidjanin) L., Rajnović D., Savković B., Wannasin J.: The microstructure influence on the chip formation process of Al-Cu alloy cast conventionally and in semi solid state, 10. International Symposium of Croatian Metallurgical Society - SHMD, Šibenik: Croatian Metallurgical Society, 17-21 June, 2012, pp. 383-383, ISBN 1334-2567 Golubovic D., Kovač P., Gostimirović M., Pucovski (Pucovsky) V., Jesic D.: WEAR INTENSITY OF DIFFERENT HEAT TREATED NODULAR IRON, 10. International Symposium of Croatian Metallurgical Society - SHMD, Šibenik: Croatian Metallurgical Society, 17-21 June, 2012, pp. 408-408, ISBN 1334-2567 Gostimirović M., Kovač P., Škorić B., Savković B., Jesic D.: Surface layer properties of the workpiece material in high performance grinding, 10. International Symposium of Croatian Metallurgical Society - SHMD, Šibenik: Croatian Metallurgical Society, 17-21 June, 2012, pp. 426-426, ISBN 1334-2567 Kovač P., Savković B., Šiđanin (Sidjanin) L., Lukac O., Mankova I.: The Influence of Material Microstructure on the Chip Forming Process, 6. International Scientific Conference "Contemporary Materials", Banja Luka: Academy of Sciences and Arts of the Republic of Srpska, 4-6 June, 2013, pp. 88-88 Kovač P., Šiđanin (Sidjanin) L., Savković B., Gostimirović M., Sekulić M.: The Use of Microscopy in Investigation of Material Microstructure after Machining Process, 1. International Multidisciplinary Microscopy Congress – INTERM, Antalya: Poster, 10-13 October, 2013, UDK: http://www.interem.org/ Adamović (Majkić) S., Kovač P., Prica M., Pavlović Ž., Stančić M.: The success of electrocoagulation/flotation treatment in removing turbidity from waste fountain solution, 21. TOP 2015-Engineering of environment protection, Bratislava: Slovak University of Technology in Bratislava, 23-25 June, 2015, pp. 18-18, ISBN 978-80-227-4376-1 Prica M., Kovač P., Tričković J., Adamović (Majkić) S., Velimirović M.: Engineered nanomaterials in waste streams, 21. TOP 2015-Engineering of environment protection, Bratislava: Slovak University of Technology in Bratislava, 23-25 June, 2015, pp. 64-64, ISBN 978-80-227-4376-1 Kirin S., Kovač P., Savković B., Mirjanić S., Šoos Lj.: Production of Biomass Energy from Landfills, 22. International Scientific Conference –Engineering for Environment Protection-TOP 2016, Bratislava: Faculty of Mechanical Engineering, STU Bratislava, 7-9 June, 2016, pp. 41-41, ISBN 978-80-227-4568-0 Kirin S., Kovač P., Sedmak A.: Potential for Using Biogas in Serbia, 6. International Conference and Workshop - REMOO, Budva: Get It Published, 18-20 May, 2016, pp. 1-1, ISBN 978-3-9816624-8-1 Sarjanović D., Kovač P., Savković B., Ješić D., Šooš Lj.: Performance of using waste hot water as an innovative energy sources, 23. International Scientific Conference "Engineering for Environment Protection" – TOP, Šamorin-Čilistov: Faculty of Mechanical Engineering STU in Bratislava, 20-22 September, 2017, pp. 69-69, ISBN 978-80-227-4731-8 Golubović D., Kovač P., Ješić D., Šooš L., Savković B., Sarjanović D.: Energetic efficiency improvement of smal hydropower plants, 24. International Scientific Conference-Engineering for Environment Protection-TOP 2018, Štrbske Pleso: Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, 19-21 September, 2018, pp. 41-41, ISBN 978-80-227-4835-3 Savković B., Bandić N., Kovač P., Ješić D., Kulundžić N.: Types of production lines for wooden mass pallets, 8. International Scientific Conference on Environmental and Material Flow Management - EMFM, Zenica: Faculty of Mechanical Engineering in Zenica, 14-16 November, 2018, pp. 11-11, ISBN 978-9958-617-46-1	15	7.50
M42	Monografija nacionalnog značaja, monografsko izdanje građe, prevod izvornog teksta Monografija nacionalnog značaja, monografsko izdanje građe, prevod izvornog teksta ***Autori: Kovač, Pavel Naziv: Podloge za upravljanje procesom čeonog glodanja - Nisu povezani autori**greska** Kovač P.: Autori: Kovač Pavel Naziv: Modeliranje procesa obrade-faktorni planovi eksperimenta , Fakultet tehničkih nauka, Izdavaštvo, 2006, ISBN 86-792-022-8	2	10.00
M43	Monografska bibliografska publikacija Monografska bibliografska publikacija Kovač P.: Deparmment for Production Engineering , Novi Sad, Fakultet tehničkih nauka, Departman za proizvodno mašinstvo, 2009, str. 1-21, ISBN 978-86-7892-216-9, UDK: 378.6:62(497.113 Novi Sad	1	3.00
M44	Poglavlje u knjizi M41 ili rad u istaknutom tematskom zborniku vodećeg nacionalnog značaja Poglavlje u knjizi M41 ili rad u istaknutom tematskom zborniku vodećeg nacionalnog značaja Kovač P.: Kovač P.: In Process Monitoring System for Milling Machine, Monografija Machine Design, Novi Sad, Fakultet tehnickih nauka, 2008, str. 259-262, ISBN 978-86-7892-105-6	1	2.00
M45	Poglavlje u knjizi M42 ili rad u tematskom zborniku nacionalnog značaja Poglavlje u knjizi M42 ili rad u tematskom zborniku nacionalnog značaja Sekulić M., Kovač P., Gostimirović M.: Drilling cutting forces monitoring using virtual instrumentation, Cracow, Central Europen Exchange Program for University Studies, Cracow University of Technology - Technical University of Košice, 2009, str. 31-36, ISBN 978-83-7242-509-6 Savković B., Kovač P., Gostimirović M., Rodić D., Pucovski (Pucovsky) V.: Development In Machining Technology, Scientific Research Reports, Edited by : Wojciech Zebela and Ildiko Mankova, Application of Neural Networks for Modeling and Prediction of The Machining Surface Roughness for Steel Dificult to Machining, Cracow, Cracow University of Technology, 2014, str. 259-270, ISBN 978-83-7242-765-6 Kovač P., Savković B., Kulundžić N., Gostimirović M., Holešovsky F., Sekulić M.: Development In Machining Technology, Scientific Research Reports, Edited by : Wojciech Zebela and Ildiko Mankova, Simulation of Temperature Distribution on the 3D Moving Cutting Tool, Cracow, Cracow University of Technology, 2015, str. 20-26, ISBN 978-83-7242-844-8 Kovač P., Ješić D., Gvozdenović N., Gostimirović M., Pucovski (Pucovsky) V.: Tribološke karakteristike različitih ulja, Novi Sad, Poljprivrednikov poljoprivredni kalendar, 2016, str. 112-114 Kovač P., Kulundžić N., Savković B., Kundrak J., Gostimirović M., Sekulić M.: Development In Machining Technology, Scientific Research Reports, Edited by : Wojciech Zebela and Ildiko Mankova, Determination of Temperature Distribution and Cutting Force in Drilling, Cracow, Cracow University of Technology, 2016, str. 7-18, ISBN 978-80-553-2576-7 Kovač P., Savković B., Pokusova M., Kulundžić N., Vrabel M.: Development In Machining Technology, Scientific Research Reports, Edited by : Wojciech Zebela and Ildiko Mankova, Machinability Study of Surface Grinding of Hard High Alloyed Cast Iron, Cracow, Cracow University of Technology, 2018, str. 105-122, ISBN 978-80-553-2718-1	6	9.00
M51	Rad u vodećem časopisu nacionalnog značaja Rad u vodećem časopisu nacionalnog značaja ***Autori: Sekulić S., Kovač, P. Naziv: Komponente otpora rezanja pri obradi na strugu u zavisnosti od elemenata preseka režućeg sloja i grudnog ugla alata, N Naziv časopisa: Zbornik radova FTN, Novi Sad - Nisu povezani autori**greska** ***Autori: Kovač, P., Milikić D. Naziv: Postojanost pri čeonom glodanju sa jednim i više zuba u zavisnosti od režima rezanja Naziv časopisa: Zbornik radova FTN - Nisu povezani autori**greska** ***Autori: Kovač, P. Naziv: Zavisnost otpora rezanja pri čeonom glodanju od položaja ose glodala Naziv časopisa: Zbornika radova FTN - Nisu povezani autori**greska** ***Autori: Sekulić S., Kovač, P. Naziv: Korelacija između najveće visine neravnina i srednjeg aritmetičkog odstupanja profila od srednje linije obrađene površine Naziv časopisa: Tribologija u industriji - Nisu povezani autori**greska** Kovač P., Ješić D., Savković B., Gostimirović M.: Determination of the Most Favourable Friction Moment for Screw Tightening, Machine Design, 2015, Vol. 7, No. 2, pp. 35-40, ISSN 1821-1259 Kovač P., Ješić D., Kirin S., Savković B.: Zagađenje voda uzrokovano uljima која роtiču od sredstava za čišćenje i odmašćivanje, Savremena poljoprivredna tehnika, 2015, Vol. 41, No. 1, pp. 17-24, ISSN 0350-2953 Kovač P., Savković B., Ješić D., Mankova I.: Ispitivanje visokootpornih prevlaka na mašinskim delovima na abrazivno habanje, Savremena poljoprivredna tehnika, 2015, Vol. 41, No. 2, pp. 95-102, ISSN 0350-2953, UDK: 621.78 Mirjanić S., Ješić D., Kovač P., Novaković S., Kirin S.: Monitoring tribomehaničkog sistema preko sredstva za podmazivanje, Savremena poljoprivredna tehnika, 2016, Vol. 42, No. 1, pp. 49-60, ISSN 0350-2953, UDK: 631.3	8	16.00
M52	Rad u časopisu nacionalnog značaja Rad u časopisu nacionalnog značaja ***Autori: Kovač, P. Naziv: Određivanje površine odziva za otpore rezanja pri čeonom glodanju Naziv časopisa: Zbornika radova Instituta za proizvodno mašinstvo, Novi Sad - Nisu povezani autori**greska** ***Autori: Kovač, P., Milikić D. Naziv: Zavisnost termonapona prirodnog termonapona pri čeonom glodanju od režima rezanja Naziv časopisa: Zbornik radova Instituta za proizvodno mašinstvo, Novi Sad - Nisu povezani autori**greska** ***Autori: Kovač, P. Naziv: Zavisnost hrapavosti obrađene površine od habanja alata Naziv časopisa: Zbornik radova Instituta za proizvodno mašinstvo, FTN, Novi Sad - Nisu povezani autori**greska** ***Autori: Vasić S., Milikić D., Kovač, P. Naziv: Ispitivanje uticaja radijalnog bacanja reznih elemenata na postojanost glava za glodanje Naziv časopisa: Zbornik radova Instituta za proizvodno mašinstvo, FTN, Novi Sad - Nisu povezani autori**greska** ***Autori: Milikić, D., Gostimirović, M., Kovač, P. Naziv: Identifikacija stanja procesa rezanja pomoću termonapona prirodnog termopara alat-obradak, N Naziv časopisa: Zbornik radova Instituta za proizvodno mašinstvo FTN - Nisu povezani autori**greska** Kovač P., Gostimirović M., Mankova I., Soos L., Savković B.: Overview of Experimental Investigation of Cutting Process Dynamic, Journal of Production Engineering, 2013, Vol. 16, No. 2, pp. 1-4, ISSN 1821-4932, UDK: 621 Savković B., Kovač P., Gerić K., Sekulić M., Rokosz K.: Application of Neural Network for Determination of Cutting Force Changes Versus Instantaneous Angle in Face Milling, Journal of Production Engineering, 2013, Vol. 16, No. 2, pp. 25-28, ISSN 1821-4932, UDK: 621 Gostimirović M., Rodić D., Kovač P., Pucovski (Pucovsky) V., Sekulić M.: Modeling of Material Removal Rate in EDM Using Neural Fuzzy Systems, Journal of Production Engineering, 2013, Vol. 16, No. 1, pp. 1-4, ISSN 1821-4932, UDK: 621 Jesic D., Pulic J., Kovač P., Savković B., Kulundžić N.: APPLICATION OF NODULAR CASTINGS IN THE MODERN INDUSTRY OF TRIBO- MECHANICAL SYSTEMS TODAY AND TOMORROW, Journal of Production Engineering, 2014, Vol. 17, No. 1, pp. 55-58, ISSN 1821-4932 Kovač P., Gostimirović M., Savković B., Mankova I., Pucovski (Pucovsky) V., Rodić D.: LCA ACTIVITIES - A REVIEW, Journal of Production Engineering, 2014, Vol. 17, No. 2, pp. 1-6, ISSN 1821-4932, UDK: 621 Kovač P., Gostimirović M., Ješić D., Savković B., Kulundžić N.: THE ROLE OF MATERIAL QUALITY CONTROL IN MODERN MANUFACTURING, Journal of Production Engineering, 2014, Vol. 17, No. 2, pp. 63-66, ISSN 1821-4932, UDK: 621 Kekić A., Ješić D., Kovač P., Stoilković M.: ZNAČAJ EKSPLOATACIONOG I LABORATORIJSKOG ISPITIVANJA MOTORNOG ULJA U VIŠE SREDSTAVA POLJOPRIVREDNE TEHNIKE , Traktori i pogonske mašine, 2014, Vol. 19, No. 3, pp. 95-102, ISSN 0354-9496, UDK: 631.372 Ješić D., Kovač P., Golubović D., Cvijanović N., Samardžija M.: PRIMENA ENERGIJE VETRA I SUNCA ZA POTREBE NAVODNJAVANJA POLJOPRIVREDNIH POVRŠINA , Traktori i pogonske mašine, 2014, Vol. 19, No. 4, pp. 26-33, ISSN 0354-9496, UDK: 629.06 Kovač P., Ješić D., Gvozdenović N., Savković B., Kekić A.: ISPITIVANJE TRIBOLOŠKIH KARAKTERISTIKA U ZAVISNOST OD PRIMENJENE VRSTE ULJA U TRIBOLOŠKOM SISTEMU , Traktori i pogonske mašine, 2014, Vol. 19, No. 3, pp. 88-94, ISSN 0354-9496, UDK: 631.372 Todić A., Pejovič B., Kovač P., Ješić D., Savković B.: Improve of Toughness and Hardness of High Alloyed Steel by Vanadium and Appropriate Heat Treatment, Journal of Production Engineering, 2015, Vol. 18, No. 1, pp. 13-17, ISSN 1821-4932 Gostimirović M., Kovač P., Radovanović M., Madić M., Krajny Z.: MODULAR DESIGN OF UNCONVENTIONAL CUTTING MACHINE TOOLS, Journal of Production Engineering, 2015, Vol. 18, No. 1, pp. 27-30, ISSN 1821-4932 Gostimirović M., Rodić D., Kovač P., Ješić D., Kulundžić N.: INVESTIGATION OF THE CUTTING FORCES IN CREEP-FEED SURFACE GRINDING PROCESS, Journal of Production Engineering, 2015, Vol. 18, No. 2, pp. 21-24, ISSN 1821-4932, UDK: 621 Plavšić M., Mirjanić S., Božičković Z., Kovač P., Rodić D., Ješić D.: DAMAGE MECHANISMS OF AUSTENITIC CHROMIUM-NICKEL PIPES IN EXPLOITATION, Journal of Production Engineering, 2015, Vol. 18, No. 2, pp. 47-50, ISSN 1821-4932, UDK: 621 Kulundžić N., Gostimirović M., Kovač P., Sekulić M., Savković B.: Micro Cutting Simulation of Abrasive Grains in the Grinding Process, Journal of Production Engineering, 2015, Vol. 18, No. 2, pp. 25-28, ISSN 1821-4932, UDK: 621 Gostimirović M., Kovač P., Sekulić M., Rodić D., Pucovski (Pucovsky) V.: Machining characteristics of electrical discharge machining - A review, Journal of Production Engineering, 2016, Vol. 19, No. 1, pp. 1-10, ISSN 1821-4932 Vrabel M., Mankova I., Kovač P., Beno J., Frankova M., Palo .: ANALYSIS AND OPTIMIZATION OF HARD TURNING PROCESS USING Al203/TiCN CERAMIC TiN PVD COATED INSERT WITH REGARD TO SURFACE ROUGHNESS AND CUTTING FORCE COMPONENTS, Journal of Production Engineering, 2016, Vol. 19, No. 1, pp. 22-26, ISSN 1821-4932, UDK: 621 Mitrović A., Kovač P., Kulundžić N., Savković B.: 3D FINITE ELEMENT SIMULATION OF MILLING, Journal of Production Engineering, 2016, Vol. 19, No. 1, pp. 31-34, ISSN 1821-4932, UDK: 621 Savković B., Tarić M., Kovač P., Nedić B., Pucovski (Pucovsky) V., Risteiu M.: MODELING OF CUTTING TEMPERATURE IN TURNING OF HARDENED STEEL, Journal of Production Engineering, 2016, Vol. 19, No. 2, pp. 7-12, ISSN 1821-4932, UDK: 621 Ješić D., Kovač P., Golubović D., Savković B.: ODREĐIVANJE ABRAZIONIH KARAKTERISTIKA NODULARNIH LIVOVA EN-GJS-420 i EN-GJS-600, Traktori i pogonske mašine, 2016, Vol. 21, No. 5, pp. 63-69, ISSN 0354-9496, UDK: 631.372 Kovač P., Rodić D., Gostimirović M., Savković B., Ješić D.: ADAPTIVE NEURO-FUZZY MODELING OF THERMAL VOLTAGE PARAMETERS FOR TOOL LIFE ASSESSMENT IN FACE MILLING, Journal of Production Engineering, 2017, Vol. 20, No. 1, pp. 16-20, ISSN 1821-4932, UDK: 621 Vrabel M., Vinas J., Mankova I., Brezinova J., Savković B., Kovač P.: ANALYSIS OF TOOL WEAR PATTERNS IN ROUGH TURNING OF CHROMIUM HARDFACING MATERIAL, Journal of Production Engineering, 2017, Vol. 20, No. 1, pp. 35-38, ISSN 1821-4932, UDK: 621 Boca M., Kovač P., Savković B.: MODEL APPROCH OF AUTOMATION OF BOTTLING AND PACKAGING FOR INDUSTRIAL PROCESS OF BOTTLES , Journal of Production Engineering, 2017, Vol. 20, No. 2, pp. 69-72, ISSN 1821-4932, UDK: 621 Tarić M., Kovač P., Nedić B., Rodić D., Ješić D.: TOOL WEAR, CUTTING TEMPERATURE AND CUTTING FORCE DURING TURNING HARD STEEL, Journal of Production Engineering, 2017, Vol. 20, No. 2, pp. 13-16, ISSN 1821-4932, UDK: 621 Pejić V., Sekulić M., Jokanovic S., Kovač P., Gostimirović M.: MODELING OF CUTTING FORCES IN BALL-END MILLING PROCESS OF HARD (HARDENED) STEEL BY USING RESPONSE SURFACE METHODOLOGY, Journal of Production Engineering, 2017, Vol. 20, No. 2, pp. 17-20, ISSN 1821-4932, UDK: 621 Ješić D., Kovač P., Sarjanović D.: ABRAZIONO I ATHEZIONO TROŠENJE PERLITNOG NODULARNOG LIVA, Traktori i pogonske mašine, 2017, Vol. 22, No. 3/4, pp. 93-100, ISSN 0354-9496, UDK: 631.312.021.3:621.791.3.004.67 Kovalevskyy S., Kovalevska O., Dašić P., Ješić D., Kovač P.: Engineering Consulting Technology in Production Engineering Intelligent Mobile Machines, International Journal of Industrial Engineering and Management, 2017, Vol. 8, No. 4, pp. 203-208, ISSN 2217-2661, UDK: 621.7/.9:[658.5:004.896 Ješić D., Kovač P., Savković B., Gostimirović M., Sarjanović D., Stanivuk T., Tarić M.: EQUIPMENT FOR TOWING - BOLLARD 200 T, Machine Design, 2018, Vol. 10, No. 1, pp. 21-24, ISSN 1821-1259 Kovač P., Savković B., Rodić D., Gostimirović M., Mankova I.: Wear of model and integral face milling cutter modelled by artificial intelligence, Journal of Production Engineering, 2018, Vol. 21, No. 1, pp. 11-16, ISSN 1821-4932, UDK: 621 Kovač P., Savković B., Rodić D., Mankova I.: Artificial inteligence approache to modeling of cutting force and tool wear relationships during dry machining, Journal of Production Engineering, 2018, Vol. 21, No. 2, pp. 13-18, ISSN 1821-4932, UDK: 621	34	51.00
M53	Rad u naučnom časopisu Rad u naučnom časopisu Gostimirović M., Kovač P., Milikić D.: Tool Life Function Determination based on the Mean Temperature During Turning, Gepgyartastechnologia, 1992, Vol. 32, No. 9-10, pp. 404-411 Milikić D., Kovač P., Gostimirović M.: Some aspects of coated hard metal insert use, Journal of the Balkan Tribological Association, 1997, Vol. 3, No. 3, pp. 129-135, ISSN 1310-4772 Gostimirović M., Kovač P.: The thermal state of the workpiece surface layer during productivity grinding, Manufacturing Technology, 2008, Vol. 8, pp. 55-61, ISSN 1213-2489 Sekulić M., Kovač P.: Modelling of components of resultant force during face milling, Journal of Machine Engineering, 2008, Vol. 8, No. 2, pp. 65-72, ISSN 1895-7595 Sovilj B., Radonjic S., Kovač P., Sovilj-Nikić I.: Analysis of Gear Characteristics and Seration Processing in "Kolubara - Metal" Factory, Journal of Production Engineering, 2009, Vol. 12, No. 1, pp. 71-74, ISSN 1821-4932, UDK: 621 Lazić B., Kovač P., Savković B.: Razvoj merno-akvizacijskoj sistema za merenje sila rezanja pri glodanju primenom virtualne instrumentacije, Zbornik radova Fakulteta tehničkih nauka, 2009, Vol. 24, No. 2, pp. 296-299, ISSN 0350-428X Mijić A., Kovač P., Savković B.: Modeliranje sila rezanja pri čeonom glodanju, Zbornik radova Fakulteta tehničkih nauka, 2009, No. Vol. XXIV, No. 6,, pp. 1807-1810, ISSN 0350-428X Gostimirović M., Kovač P., Sekulić M., Savković B.: An Interse Heat Transfer Method for Determination of the Workpice Temperature in Grunding, Journal of Production Engineering, 2009, Vol. 12, No. 1, pp. 5-8, ISSN 1821-4932, UDK: 621 Kovač P., Gostimirović M., Sekulić M., Savković B.: A Rewiev of Research Related to Advancing Manufacturing Technology, Journal of Production Engineering, 2009, Vol. 12, No. 1, pp. 9-16, ISSN 1821-4932, UDK: 621 Kovač P., Gostimirović M., Sekulić M., Savković B.: A Rewiev to Advanced Modeling and Simulation of Machining Process, Journal of Production Engineering, 2009, Vol. 12, No. 1, pp. 17-22, ISSN 1821-4932, UDK: 621 Kovač P., Gostimirović M., Sekulić M.: CUTTING PROCESS AND MACHINE TOOL INTERACTION ANALYZE, Machine Design, 2010, pp. 235-240, ISSN 1821-1259 Sekulić M., Kovač P., Gostimirović M., Jurković Z., Savković B.: A new thrust force model for drilling process, Journal of Production Engineering, 2010, Vol. 13, No. 1, pp. 19-22, ISSN 1821-4932, UDK: 621 Savković B., Kovač P., Gostimirović M., Sekulić M., Rajnović D.: Experimental study of nodular cast iron alloys during milling, Journal of Production Engineering, 2010, Vol. 13, No. 1, pp. 15-18, ISSN 1821-4932, UDK: 621 Kovač P., Mankova I., Gostimirović M., Sekulić M., Savković B.: A review of the experimental techniques for the measurement of temperature generated in material removal processes, Journal of Production Engineering, 2010, Vol. 13, No. 1, pp. 1-6, ISSN 1821-4932, UDK: 621 Kovač P., Gostimirović M., Sekulić M., Savković B.: PRIMENA SAVREMENIH METODA U ISTRAŽIVANJIMA PROCESA OBRADE REZANJEM, Tehnika - Mašinstvo, 2010, Vol. 65, No. 3, pp. 45-52, ISSN 0461-2531, UDK: 62(062.2)(497.1) Janjatović D., Kovač P., Savković B.: PRIMENA NEURONSKE MREŽE ZA ODREĐIVANJE POSTOJANOSTI I TEMPERATURE REZANJA PRI ČEONOM GLODANJU, Zbornik radova Fakulteta tehničkih nauka, 2010, Vol. 25, No. 5, pp. 967-970, ISSN 0350-428X, UDK: 621.914:004.032.26.048 Pantović V., Kovač P., Savković B.: EKSPERIMENTALNA ISPITIVANJA OTPORA REZANJA PRI ČEONOM GLODANJU NODULARNOG LIVA, Zbornik radova Fakulteta tehničkih nauka, 2010, Vol. 25, No. 5, pp. 974-977, ISSN 0350-428X, UDK: 621.914 Rodić D., Kovač P., Savković B.: PRIMENA FAZI LOGIKE I ANFIS SISTEMA U ISTRAŽIVANJIMA PROCESA OBRADE ČEONIM GLODANJEM, Zbornik radova Fakulteta tehničkih nauka, 2010, Vol. 25, No. 17, pp. 3597-3600, ISSN 0350-428X, UDK: 621.914:004.8 Kovač P., Gostimirović M., Sekulić M., Pižurica N.: The Internet/Intranet Application for Cutting Regime Setting, Journal of Machine Engineering, 2010, Vol. 10, No. 2, pp. 18-24, ISSN 1895-7595 Sovilj B., Tiba S., Kovač P., Jesic D., Sovilj-Nikić I.: Influence of coating on tool life of hob milling tool, Journal of Production Engineering, 2010, pp. 31-36, ISSN 1821-4932 Djurić S., Kovač P., Rodić D.: MODELIRANJE OTPORA REZANJA PRI HABANJU ALATA PRIMENOM NEURO-FAZI SISTEMA I FAZI LOGIKE, Zbornik radova Fakulteta tehničkih nauka, 2011, Vol. 25, No. 14, pp. 3271-3274, ISSN 0350-428X, UDK: 621.9 Kovač P., Savković B., Serdar B., Sekulić M.: MODELING MECHANICAL AND THERMAL LOAD OF CUTTING TOOL, Acta Technica Corviniensis, 2011, Vol. 4, No. 4, pp. 77-80, ISSN 2067-3809 Mankova I., Kovač P., Kundrak J., Beno J.: Outline of FEM Simulation and Modelling of Hard Turning Process, Acta Mechanica Slovaca, 2011, Vol. 15, No. 3, pp. 14-21, ISSN 1335-2393, UDK: DOI:10.2478/v10147-011-0080-1 Kovač P., Savković B., Mijic A., Sekulić M.: ANALITICAL AND EXPERIMENTAL STUDY OF CUTTING FORCE COMPONENTS IN FACE MILLING, Journal of Production Engineering, 2011, Vol. 14, No. 1, pp. 15-18, ISSN 1821-4932, UDK: 621 Mankova I., Kovač P., Kundrak J., Beno J.: Finite element analysis of hardened steel cutting, Journal of Production Engineering, 2011, Vol. 14, No. 1, pp. 7-10, ISSN 1821-4932 Nagy L., Palkova Z., Kovač P.: Matlab algorithms for the lighting control on the constant value, Journal of Production Engineering, 2011, Vol. 14, No. 1, pp. 47-50, ISSN 1821-4932 Kovač P., Mankova I., Gostimirović M., Sekulić M., Savković B.: A REVIEW OF MACHINING MONITORING SYSTEMS, Journal of Production Engineering, 2011, Vol. 14, No. 1, pp. 1-6, ISSN 1821-4932, UDK: 621 Pucovski (Pucovsky) V., Kovač P., Savković B.: PRIMENA GENETSKIH ALGORITAMA ZA ODREĐIVANJE POSTOJANOSTI I TEMPERATURE REZANJA PRI ČEONOM GLODANJU, Zbornik radova Fakulteta tehničkih nauka, 2011, Vol. 26, No. 1, pp. 1-4, ISSN 0350-428X, UDK: 621.914:004.032.26.048 Kovač P., Rodić D., Pucovski (Pucovsky) V., Mankova I., Savković B., Gostimirović M.: A Review of Artifacial Inteligence Approaches Applied in Inteligent Processes, Journal of Production Engineering, 2012, Vol. 15, No. 1, pp. 1-6, ISSN 1821-4932, UDK: 621 Gostimirović M., Kovač P., Sekulić M., Savković B.: A Study of discharge Pulse Enegry in Electrical Descharge Machining, Journal of Production Engineering, 2012, Vol. 15, No. 1, pp. 7-10, ISSN 1821-4932, UDK: 621 Gostimirović M., Pucovski (Pucovsky) V., Kovač P., Rodić D., Savković B.: Modeling of Discharge Energy in Electrical Discharge Machining by the use of Genetic Programmming, Journal of Production Engineering, 2012, Vol. 15, No. 2, pp. 15-18, ISSN 1821-4932, UDK: 621 Kramar D., Sekulić M., Kovač P., Gostimirović M., Kopač J.: THE IMPLEMENTATION OF TAGUCHI METHOD FOR QUALITY IMPROVEMENT IN HIGH-PRESSURE JET ASSISTED TURNING PROCESS, Journal of Production Engineering, 2012, Vol. 15, No. 2, pp. 23-26, ISSN 1821-4932, UDK: 621 Pucovski (Pucovsky) V., Kovač P., Tolnay M., Savković B., Rodić D.: The Adequate Type of Function for Modeling tool life Selection by the use of Genetic Algorithms, Journal of Production Engineering, 2012, Vol. 15, No. 1, pp. 25-28, ISSN 1821-4932, UDK: 621 Jan S., Marian T., Michal B., Roland J., Kovač P.: Determining the resulting deformation of a rectangular metal sheet using fem calculations, Scientific Proceedings, 2012, Vol. 20, No. 1, pp. 15-21, ISSN 1338-1954 Mitrović A., Radonjić S., Kovač P.: Optimization of processing parameters and quality testing of processing during laser cutting steel AISI 310 , Metalurgia international, 2013, Vol. 18, No. 3, pp. 11-16, ISSN 1582-2214 Mankova I., Vrabel M., Beno J., Kovač P., Gostimirović M.: Application of Taguchi Method and Surface Response Methodology to Evaluate Of Mathematical Models to Chip Deformation when Drilling With Coated and Uncoated Twist Drills, Manufacturing Technology, 2013, Vol. 13, No. 4, pp. 492-499, ISSN 1213-2489 Sekulić M., Kovač P., Gostimirović M., Kramar D.: Optimization of high-pressure jet assisted turning process by Taguchi method, Advances in Production Engineering and Management, 2013, Vol. 8, No. 1, pp. 5-12, ISSN 1854-6250 Kulundžić N., Kovač P., Savković B., Šoos Lj., Rokosz K.: FEM Simulation of Cutting Processes, Scientific Proceedings, 2013, Vol. 21, No. 1, pp. 121-130, ISSN 1338-1954 Mite T., Mikolaj K., Kovač P.: A New Aproach in Measuring of the Roughness for surface Constituted with Machining Process by Materijal Removal, International Journal of Mechanical and Production Engineering Research and Development, 2013, Vol. 3, No. 1, pp. 41-52, ISSN 2249-6890 Mankova I., Vrabel M., Kovač P.: Artificial Neural Network Application for Surface Roughness Prediction when Drilling Nickel Based Alloy, Manufacturing Technology, 2013, Vol. 13, No. 2, pp. 193-199, ISSN 1213-2489 Kulundžić N., Kovač P., Savković B.: Simulacija obrade rezanja u programskom paketu Ansys, Zbornik radova Fakulteta tehničkih nauka, 2013, Vol. 28, No. 1, pp. 13-16, ISSN 0350-428X, UDK: 621.96 Mitrović D., Kovač P., Savković B.: OBNOVLJIVI IZVORI ENERGIJE - TOPLOTNE PUMPE, Zbornik radova Fakulteta tehničkih nauka, 2014, Vol. 29, No. 5, pp. 813-816, ISSN 0350-428X, UDK: 620.92 Gostimirović M., Rodić D., Kovač P., Pucovski (Pucovsky) V., Savković B.: APPLICATION OF NEURO-FUZZY SYSTEMS AND GENETIC PROGRAMMING FOR MODELLING SURFACE ROUGHNESS IN ELECTRICAL DISCHARGE MACHINING, Annals of Faculty Engineering Hunedoara - International Journal of Engineering, 2014, Vol. 7, No. 1, pp. 137-140, ISSN 1584-2665 Kovač P., Savković B., Šiđanin (Sidjanin) L., Lukač O., Mankova I.: THE INFLUENCE OF MATERIAL MICROSTRUCTURE ON THE CHIP FORMING PROCESS, Contemporary Materials, 2014, Vol. 5, No. 1, pp. 69-76, ISSN 1986-8669, UDK: UDK 621.9.01:669 Sekulić M., Kovač P., Gostimirović M., Hadžistević M., Jurković Z.: PREDICTION OF THE MAIN CUTTING FORCE IN DRILLING BY KIENZLE EQUATION, Journal of Trends in the Development of Machinery and Associated Technology, 2014, Vol. 18, No. 1, pp. 27-30, ISSN 2303-4009 Rodić D., Gostimirović M., Kovač P., Mankova I., Pucovski (Pucovsky) V.: Predicting of machining quality in electric discharge machining using intelligent optimization techniques, International Journal of Recent Advances in Mechanical Engineering, 2014, Vol. 3, No. 2, pp. 1-9, ISSN 2200-5854, UDK: DOI : 10.14810/ijmech.2014.3201 Rodić D., Gostimirović M., Kovač P., Radovanović M., Savković B.: Comparison of fuzzy logic and neural network for modelling surface roughness in edm, International Journal of Recent Advances in Mechanical Engineering, 2014, Vol. 3, No. 3, pp. 69-78, ISSN 2200-5854, UDK: DOI : 10.14810/ijmech.2014.3306 Bachraty M., Kralik M., Tolnay M., Tekulova Z., Kovač P., Pucovski (Pucovsky) V.: Test equipment for measuring of friction factor of cutting environment, Scientific Proceedings, 2015, Vol. 23, No. 1, pp. 69-77, ISSN 1338-1954 Ješić D., Kovač P., Savković B.: ENERGETIC AND ECONOMIC ASPECTS OF TRIBOLOGICAL PROPERTIES OF AUSTEMPERED NODULAR CASTING, Contemporary Materials, 2016, Vol. 7, No. 1, pp. 73-76, ISSN 1986-8669, UDK: 661.665.2:620.9 Boćan N., Kovač P., Savković B., Kulundžić N.: SIMULACIJA OBRADE BUŠENJA POMOĆU METODA KONAČNIH ELEMENATA, Zbornik radova Fakulteta tehničkih nauka, 2016, Vol. 31, No. 3, pp. 414-417, ISSN 0350-428X, UDK: 621.914 Mitrović A., Kovač P., Kulundžić N., Savković B.: Analiza toplotnih pojava pri obradi glodanjem metodom konačnih elemenata , Tehnika i praksa, 2016, Vol. 15, No. 1, pp. 147-152, ISSN 2217-2130 Radić I., Kovač P., Savković B.: Tehnologije izrade kalupa za oblikovanje pneumatika, Zbornik radova Fakulteta tehničkih nauka, 2016, Vol. 31, No. 9, pp. 1559-1562, ISSN 0350-428X, UDK: 621.914 Kirin S., Kovač P., Savković B., Mirjanić S., Šooš Lj.: THE ECONOMIC SUSTAINABILITY OF A MODEL THAT BALANCES ECOLOGICAL AND POWER SUPPLY NEEDS, MM (Modern Machinery) Science Journal, 2017, Vol. 10, No. 1, pp. 1692-1695, ISSN 1803-1269, UDK: DOI: 10.17973/MMSJ.2017_02_2016143 Savković B., Kovač P., Mankova I., Gostimirović M., Rokosz K., Rodić D.: Surface roughness modeling of semi solid aluminum milling by fuzzy logic, Journal of Advances in Technology and Engineering Research, 2017, Vol. 3, No. 2, pp. 44-56, ISSN 2414-4592, UDK: DOI:10.20474/jater-3.2.2 Ješić D., Kovač P., Rodić D., Savković B., Sarjanović D.: FUZZY MODELING OF TEMPERING PROCESS OF CAST STEEL, Contemporary Materials, 2017, Vol. 8, No. 2, pp. 184-189, ISSN 1986-8669, UDK: 669.141.246 Kovač P., Savković B., Gostimirović M., Ješić D., Mankova I.: Modeling of the machining surface roughness parameters for steel difficult to machining, Analele Universităţii „Eftimie Murgu”, 2017, Vol. 24, No. 1, pp. 175-183, ISSN 1453-7397 Vrabe M., Durakbasa N., Kovač P., Mankova I.: Contribution to the FEM simulation of Ti6Al4V Machining, Acta Mechanica Slovaca, 2017, Vol. 21, No. 1, pp. 54-61, ISSN 1335-2393 Pokusova M., Murgašova M., Adamekova Z., Kovač P.: Environmental characteristics of the reclaimed foundry self-hardening mould sands, Waste Forum, 2017, Vol. 10, No. 5, pp. 478-484, ISSN 1804-0195 Šooš Lj., Pokusova M., Matuš M., Kovač P.: New technology decomposition of bonded glasses, Waste Forum, 2017, Vol. 10, No. 5, pp. 519-530, ISSN 1804-0195 Kovač P., Tarić M., Rodić D., Nedić B., Savković B., Ješić D.: Surface roughness modeling of CBN hard steel turning, Cutting & Technological System Tools, 2018, Vol. 89, No. 1, pp. 78-87, ISSN 2078-7405, UDK: 621.91 Kovač P., Tarić M., Rodić D., Savković B., Ješić D., Golubović D.: Neuro-fuzzy systems modelling of hard steel surface roughness parameters, Acta Technica Corviniensis, 2018, Vol. 11, No. 4, pp. 67-71, ISSN 2067-3809 Aleksić A., Sekulić M., Savković B., Gostimirović M., Kamenko I., Kovač P.: OPTIMIZATION OF CUTTING PARAMETERS BY NATURE-INSPIRED ALGORITHMS, Acta Technica Corviniensis, 2020, Vol. 13, No. 4, pp. 41-44, ISSN 2067-3809	62	62.00
M61	Predavanje po pozivu sa skupa nacionalnog značaja štampano u celini Predavanje po pozivu sa skupa nacionalnog značaja štampano u celini ***Autori: Kovač, P., Stankov J. Naziv: Odredjivanje hrapavosti kod obrade poliranjem korišćenjem delimičnog faktornog eksperimenta Naziv skupa: KOMEOS’83 - Nisu povezani autori**greska** Milikić D., Kovač P., Gostimirović M., Sekulić M.: Inovativne metode u istraživanjima i primeni tehnologije obrade rezanjem-Rad po pozivu , 32. Savetovanje proizvodnog mašinstva Srbije sa međunarodnim učešćem, Novi Sad: FTN Novi Sad, 18-20 Septembar, 2008, pp. 25-34, ISBN 978-86-7892-131-5	2	3.00
M63	Saopštenje sa skupa nacionalnog značaja štampano u celini Saopštenje sa skupa nacionalnog značaja štampano u celini ***Autori: Sekulić S., Kovač, P. Naziv: Hrapavost obrađene površine pri prethodnoj i završnoj obradi ravnim brušenjem Naziv skupa: MMA’79, - Nisu povezani autori**greska** ***Autori: Kovač, P. Naziv: Postojanost u funkciji poluprečnika zaobljenja vrha alata pri obradi na strugu, Naziv skupa: XIV Savetovanja proizvodnog našinstva Jugoslavie, knjga II, - Nisu povezani autori**greska** ***Autori: Sekulić S., Kovač, P. Naziv: Komponente otpora rezanja pri obradi na strugu u zavisnosti od elemenata preseka režućeg sloja, poluprečnika zaobljenja vrha alata i napadnog ugla, N Naziv skupa: XIV Savetovanje proizvodnog našinstva Jugoslavie, knjga II - Nisu povezani autori**greska** ***Autori: Kovač, P., Stankov J. Naziv: Odredjivanje optimalnih režima rezanja za specijalni medicinski čelik, Naziv skupa: XI Simpozium Upravljanje proizvodnjom u industriji prerade metala, - Nisu povezani autori**greska** ***Autori: Sekulić S., Kovač, P. Naziv: Komponente otpora rezanja pri obradi na strugu u zavisnosti od elemenata preseka režućeg sloja i grudnog ugla alata Naziv skupa: XI Savetovanja proizvodnog našinstva Jugoslavije - Nisu povezani autori**greska** ***Autori: Kovač, P., Milikić D. Naziv: Uticaj poluprečnika zaobljenja vrha alata na postojanost pri obradi glavama za glodanje Naziv skupa: Konferencije MMA’83 - Nisu povezani autori**greska** ***Autori: Sekulić S., Kovač, P. Naziv: Primena Međunarodnog sistema mernih jedinica (SI) u Obradi metala rezanjem. Naziv skupa: XI JUKEM’84 - Nisu povezani autori**greska** ***Autori: Milikić D., Kovač P., Gostimirović M. Naziv: Neka razmatranja u vezi dobijanja povoljnih oblika strugotine pri obradi rezanjem Naziv skupa: XIX Savetovanja proizvodnog mašinstva Jugoslavije - Nisu povezani autori**greska** ***Autori: Milikić D., Kovač P., Rvović M. Naziv: Prilog određivanju kontaktnih temperatura pri ravnom brušenju Naziv skupa: XIX Savetovanja proizvodnog mašinstva Jugoslavije - Nisu povezani autori**greska** ***Autori: Kovač, P. Naziv: Pojava koncentrisanog habanja pri čeonom glodanju Naziv skupa: XX Savetovanja proizvodnog mašinstva Jugoslavije - Nisu povezani autori**greska** ***Autori: Kovač, P., Stankov J. Naziv: Odredjivanje hrapavosti posle obrade poliraniem kao merna i računska vrednost, Naziv skupa: JUKEM’82, - Nisu povezani autori**greska** ***Autori: Kovač, P. Naziv: Funkcija postojanosti alata u zavisnosti od elemenata režima rezanja pri čeonom glodanju Naziv skupa: XXI Savetovanje proizvodnog strojarstva Jugoslavije - Nisu povezani autori**greska** ***Autori: Gostimirović M., Milikić D., Kovač, P. Naziv: Merni sistem za određivanje srednje temperature pri obradi rezanjem integrisan sa mikroračunarom Naziv skupa: X Savetovanje o merenju - Nisu povezani autori**greska** ***Autori: Kovač, P., Milikić D., Gostimirović M. Naziv: Sisten za merenje termonapona pri čeonom glodanju integrisan sa računarom Naziv skupa: JUKEM 13, - Nisu povezani autori**greska** ***Autori: Gostimirović, M., Milikić, D., Kovač, P. Naziv: Merni sistem za određivanje srednje temperature pri obradi rezanjem integrisan sa mikroračunarom Naziv skupa: X savetovanja o merenju - Nisu povezani autori**greska** ***Autori: Sekulić M., Uzelac S., Kovač P. Naziv: Uporedna analiza četiri modela četvorofaktornog plana eksperimenta Naziv skupa: XXII Jugoslovenski simpozijum o operacionim istraživanjima SYM-OP-IS ‘95 - Nisu povezani autori**greska** ***Autori: Kovač, P., Uzelac S. Naziv: Optimizacija režima rezanja pri čeonom glodannju Naziv skupa: SYM-OP-IS ΄98, - Nisu povezani autori**greska** Matin I., Kovač P., Hodolič J.: Primena Pro/E modula za dizajniranje kalupnih šupljina kokile klipa M-3 , 6. Međunarodni naučno-stručni skup o dostignućima elektrotehnike, mašinstva i informatike - DEMI, Banja Luka: Mašinski fakultet, 30-31 Maj, 2003, pp. 97-100, ISBN 99938-623-8-X ***Autori: Kovač, P., Sekulić S. Naziv: Otpori rezanja pri okruglom brušenju Naziv skupa: Međunarodna konferencija MMA - Nisu povezani autori**greska** ***Autori: Radonjić S., Kovač P Naziv: Mehaničko Recikliranje plastike Naziv skupa: Zbornik radova Savetovanja proizvodnog mašinstva SCG - Nisu povezani autori**greska** Kovač P., Radonjic S.: Tehnologija reciklaže pet ambalaže, 32. Savetovanje proizvodnog mašinstva Srbije sa međunarodnim učešćem, Novi Sad: Fakultet tehnickih nauka, 18-20 Septembar, 2008, pp. 51-54, ISBN 978-86-7892-131-5 Kovač P., Šiđanin (Sidjanin) L., Savković B., Wannasin J., Rajnović D.: Uporedno ispitivanje procesa nastajanja strugotine pri obradi legure na bazi aluminijuma , 32. Savetovanje proizvodnog mašinstva Srbije sa međunarodnim učešćem, Novi Sad: Fakultet tehničkih nauka, Novi Sad, 18-20 Septembar, 2008, pp. 65-68, ISBN 978-86-7892-131-5 Gostimirović M., Milikić D., Kovač P., Sekulić M., Savković B.: Uvođenje obrade vodenim mlazom u savremenu industrijsku proizvodnju , 32. Savetovanje proizvodnog mašinstva Srbije sa međunarodnim učešćem, Novi Sad: Fakultet tehnickih nauka, 18-20 Septembar, 2008, pp. 51-54, ISBN 978-86-7892-131-5 Sekulić M., Milikić D., Gostimirović M., Kovač P.: Monitoring sila rezanja pri bušenju, 32. Savetovanje proizvodnog mašinstva Srbije sa međunarodnim učešćem, Novi Sad: Fakultet tehnickih nauka, Novi Sad, 18-20 Septembar, 2008, pp. 89-92, ISBN 978-86-7892-131-5 Sovilj B., Brezočnik M., Sovilj-Nikić I., Kovač P.: Modeliranje funkcije postojanosti alata primenom genetskog algoritma i plana eksperimenta pri izradi profila, 33. Savetovanje proizvodnog mašinstva Srbije sa međunarodnim učešćem, Beograd: Mašinski fakultet, 16-17 Jun, 2009, pp. 207-210, ISBN 978-86-7083-662-4 Sovilj B., Seuček I., Kovač P., Bera R., Milenković Đ., Sovilj-Nikić I.: Projektovanje pravog zupčastog noža primenom savremenih programskih sistema, 33. Savetovanje proizvodnog mašinstva Srbije sa međunarodnim učešćem, Beograd: Mašinski fakultet, 16-17 Jun, 2009, pp. 143-146, ISBN 978-86-7083-662-4 Baralić J., Radonjić S., Nedić B., Kovač P.: Habanje cevi za usmerivanje mlaza, 33. Savetovanje proizvodnog mašinstva Srbije sa međunarodnim učešćem, Beograd: Mašinski fakultet Beograd, 16-17 Jun, 2009, pp. 79-82, ISBN 978-86-7083-662-4 Pucovski (Pucovsky) V., Kovač P., Tolnay M., Savković B., Ildiko M.: Analysis of Academic Staff Mobility Potential, 20. Skup "Trendovi razvoja" - TREND, Kopaonik: Fakultet tehnickih nauka, 24-27 Februar, 2014, pp. 87-90, ISBN 978-86-7892-594-8 Ješić D., Savković B., Kovač P.: ENERGETIC AND ECONOMIC ASPECT OF TRIBOLOGICAL PROPERTIES OF AUSTEMPERED NODULAR CASTING, 7. Međunarodni naučni skup Savremeni materijali, Banja Luka: Academy of Sciences and Arts of the Republic of Srpska, 21-22 Decembar, 2014, pp. 67-72, ISBN 978-99938-21-65-6 Kovač P., Savković B., Gostimirović M., Ješić D.: ADOPTION OF SPECIFIC BORONISING TECHNOLOGY OF STEEL WORKPIECE AND EXEMINATION OF BORID LAYER WEAR, 7. Međunarodni naučni skup Savremeni materijali, Banja Luka: Academy of Sciences and Arts of the Republic of Srpska, 21-22 Decembar, 2014, pp. 73-82, ISBN 978-99938-21-65-6 Kovač P., Savković B., Ješić D., Gostimirović M.: Effect of head treatment on the fatigue strength of steel en 42CrMoS4, 8. Međunarodni naučni skup Savremeni materijali, Banja Luka: Academy of Sciences and Arts of the Republic of Srpska, 6-7 Septembar, 2015, pp. 547-559, ISBN 978-99938-21-80-9 Kovač P., Ješić D., Gvozdenović N., Gostimirović M., Pucovski (Pucovsky) V.: ISTRAŽIVANJE TRIBOLOŠKIH KARAKTERISTIKA RAZLIČITIH ULJA PRIMENJENIH U TRIBOMEHANIČKOM SISTEMU, 12. International Conference on Tribology - SERBIATRIB, Kragujevac: University of Belgrade, Faculty of Mechanical Engineering, 11-13 Maj, 2011, pp. 605-610 Mitrović A., Kovač P., Kulundžić N., Savković B.: Modelovanje i simulacija procesa obrade glodanjem, 40. JUPITER konferencija, Beograd: Mašinski fakultet Beograd, 16-17 Maj, 2016, pp. 223-226, ISBN 978-86-7083-893-2 Ješić D., Kovač P., Stevović S., Savković B., Gostimirović M.: Određivanje srednje dubine boridnog sloja u zavisnosti od temperature, 9. International Scientific Conference "Contemporary Materials", Banja Luka: Academy of Sciences and Arts of the Republic of Srpska, Banja Luka, 4-5 Septembar, 2016, pp. 203-213, ISBN 978-99938-21-89-2 Kovač P., Ješić D., Kulundžić N., Gostimirović M., Jakovljević S.: Uticaj difuznog procesa prevlačenja na formiranje tvrdih karbidnih slojeva, 9. International Scientific Conference "Contemporary Materials", Banja Luka: Academy of Sciences and Arts of the Republic of Srpska, Banja Luka, 4-5 Septembar, 2016, pp. 315-324, ISBN 978-99938-21-89-2 Sarjanović D., Ješić D., Kovač P., Novaković S., Savković B., Đorđević D.: Monitoring tribomehaničkog sistema preko sredstva za podmazivanje - sa osvrtom na PQ index, 16. International Conference "Economic / Legal / Communication aspects of the Western Balkans countries with special emphasis on Bosnia and Herzegovina in the Process of integration to the European Union", Travnik: Internacionalni univerzitet Travnik u Travniku, 15-16 Decembar, 2017, pp. 598-608, ISBN ISSN: 2232-8807 Kovač P., Rodić D., Savković B., Ješić D., Golubović D.: Modeliranje otpora rezanja pri glodanju pomoću fazi logike, 16. International Symposium INFOTEH-JAHORINA (INFOTEH), Jahorina: Istočno Sarajevo: Elektrotehnički fakultet, 22-24 Mart, 2017, pp. 416-419, ISBN 978-99976-710-0-4 Sekulić M., Pejic V., Kovač P., Gostimirović M., Savković B.: MODELOVANJE I OPTIMIZACIJA PROCESA OBRADE REZANJEM, 1. Konferencija sa međunarodnim učešćem "Primena novih tehnologija i ideja u školskom inženjerskom obrazovanju", Požega (Užička): TEHNIČKA ŠKOLA, Vuka Karadžića 6, 31210 POŽEGA, SRBIJA, 15-16 Maj, 2017, pp. 129-138, ISBN 978-86-915487-1-1 Kovač P., Ješić D., Savković B., Dašić P., Sarjanović D.: Ispitivanje visokootpornih prevlaka na mašinskim delovima na abrazivno habanje, 15. International Conference "Traffic, Ecological and Economy Problems and Perspectives of Solving of mentioned in the countries of Western Balkan with an Overview on Bosnia and Herzegovina", Travnik: Internacionalni univerzitet Travnik u Travniku, 19-20 Maj, 2017, pp. 617-624, ISBN ISSN: 2232-8807 Ješić D., Kovač P., Savković B., Dašić P., Sarjanović D.: The quality of products influences quality of life, 7. International Conference "Economics and Management - Based on New Technologies" (EMoNT), Vrnjačka Banja: SaTCIP (Scientific and Tehnical Center for Intellectual Poperty), 15-18 Jun, 2017, pp. 217-224, ISBN 978-86-6075-061-9 Golubović D., Ješić D., Kovač P., Savković B., Sarjanović D.: Poboljšanje energetske efikasnosti male hidroelektrane, 6. Savetovanje o energetici u BIH sa međunarodnim učešćem, Neum: CETEOR Sarajevo, 28-29 Septembar, 2017, pp. 37-43, ISBN 977-22-330-1200-6 Kovač P., Savković B., Rodić D., Gostimirović M., Sekulić M., Šooš Lj.: Digitalizacija experimentalnih vežbi iz predmeta teorija obradnih procesa, 24. Trendovi razvoja - TREND, Kopaonik: Fakultet tehničkih nauka, Novi Sad, 21-23 Februar, 2018, pp. 316-319, ISBN 978-86-6022-031-0 Kulundžić N., Savković B., Kovač P., Gostimirović M., Ješić D.: Simulacija temperaturnog polja i sila rezanja pri bušenju, 37. Savetovanje proizvodnog mašinstva Srbije - SPMS, Kragujevac: University of Kragujevac, Faculty of Engineering, 25-26 Oktobar, 2018, pp. 161-164, ISBN 978-86-6335-057-1 Savković B., Kovač P., Golubović D., Gostimirović M., Ješić D.: Monitoring potrošnje snage pri glodanju pomoću utrošene električne energije, 4. International Scientific Conference "Conference on Mechanical Engineering Technologies and Applications" - COMETa, Jahorina: Faculty of Mechanical Engineering East Sarajevo, 27-30 Novembar, 2018, pp. 105-113, ISBN 978-99976-719-4-3 Kovač P., Savković B., Šooš L., Kulundžić N., Sarjanović D.: Recikliranje ulja iz motornih vozila, Proceedings of International University Travnik, 2018, Vol. 8, No. 18, pp. 408-416, ISSN 2232-8807, 18. International Conference "Development trends of the Western Balkan countries based on knowledge with a special overview on BIH within the process of accession to EU", Travnik: Internacionalni Univerzitet Travnik, 14-15 Decembar, 2018, pp. 408-416	45	22.50
M71	Odbranjena doktorska disertacija Odbranjena doktorska disertacija Kovač P.: Istraživanje podloga za upravljanje procesom čeonog glodanja, Doktorska disertacija , Novi Sad, Univerzitet u Novom Sadu, Fakultet tehničkih nauka, 1987	1	6.00
M72	Odbranjen magistarski rad Odbranjen magistarski rad Kovač P.: Hrapavost obrađene površine u funkciji parametara rezanja pri završnoj obradi na strugu , Novi Sad, Univerzitet u Novom Sadu, Fakultet tehničkih nauka, 1980	1	3.00
M83	Novo laboratorijsko postrojenje, novo eksperimentalno postrojenje, novi tehnološki postupak Novo laboratorijsko postrojenje, novo eksperimentalno postrojenje, novi tehnološki postupak Kovač P.: Kovač P.: Tehničko rešenje dobijanja korena strugotine pri obradi glodanjem, FTN, DPM, 2004. Verifikovano u radu: Kovač, P., Šiđanin, L.: Istraživanje procesa nastajanja strugotine pri obradi legura na bazi aluminijuma, Međunarodna konferencija MMA 2006, Novi Sad,: Fakultet tehničkih nauka, Institut za proizvodno mašinstvo, 15-16 jun, 2006, 2004	1	4.00
M85	Prototip, nova metoda, softver, standardizovan ili atestiran instrument, Prototip, nova metoda, softver, standardizovan ili atestiran instrument, ***Autori: Kovač, P. Naziv: Programski paket za obradu podataka po metodologiji višefaktornog plana experimenta za modele drugog reda Korisnik: Institut za proizvodno mašinstvo, Katedra za procese obrade metala rezenjem i simulacije Rađeno za: Fakultet tehničkih nauka, Institut za proizvodno mašinstvo - Nisu povezani autori**greska** ***Autori: Kovač, 11. Milikić D., Vukelja D., Kovač P. i dr. Naziv: Istraživanje obrade bušenjem dubokih otvora u čeličnim kokilama za livenje cevi Korisnik: RO "Livnica" Vršac Rađeno za: RO "Livnica" Vršac - Nisu povezani autori**greska** ***Autori: Kovač, P. Naziv: Tehničko rešenje dobijanja korena strugotine pri obradi bušenjem, FTN, IPM, 1991 Korisnik: Institut za proizvodno mašinstvo, Katedra za procese obrade metala rezanjrm i simulacije Rađeno za: Fakultet tehničkih nauka, Institut za proizvodno mašinstvo - Nisu povezani autori**greska** ***Autori: Kovač, P. Naziv: Tehničko rešenje dobijanja korena strugotine pri obradi struganjem Korisnik: Institut za proizvodno mašinstvo, Katedra za procese obrade metala rezenjem i simulacije Rađeno za: Fakultet tehničkih nauka, Institut za proizvodno mašinstvo - Nisu povezani autori**greska** ***Autori: Kovač, P. Naziv: Tehničko rešenje dobijanja korena strugotine pri obradi glodanjem i brušenjem Korisnik: Institut za proizvodno mašinstvo, Katedra za procese obrade metala rezenjem i simulacije Rađeno za: Fakultet tehničkih nauka, Institut za proizvodno mašinstvo - Nisu povezani autori**greska** ***Autori: Kovač, P. Naziv: Programsko rešenje baze podataka za glodanje Korisnik: Institut za proizvodno mašinstvo, Katedra za procese obrade metala rezanjem i simulacije Rađeno za: Fakultet tehničkih nauka, Institut za proizvodno mašinstvo - Nisu povezani autori**greska** ***Autori: Kovač, P. Naziv: Programsko rešenje baze podataka pri obradi brušenjem Korisnik: Institut za proizvodno mašinstvo, Katedra za procese obrade metala rezanjrm i simulacije Rađeno za: Fakultet tehničkih nauka, Institut za proizvodno mašinstvo - Nisu povezani autori**greska** ***Autori: Kovač, P. Naziv: Programsko rešenje za obradu podataka po metodologiji višefaktornog plana experimenta Korisnik: Institut za proizvodno mašinstvo Rađeno za: Fakultet tehničkih nauka, Institut za proizvodno mašinstvo, Katedra za procese obrade metala rezenjem i simulacije - Nisu povezani autori**greska** ***Autori: Kovač, P. Naziv: Programsko rešenje optimizacije režima rezanja pri čeonom glodanju Korisnik: Institut za proizvodno mašinstvo, Katedra za procese obrade metala rezenjem i simulacije Rađeno za: Fakultet tehničkih nauka, Institut za proizvodno mašinstvo - Nisu povezani autori**greska** Kovač P., Gostimirović M., Sekulić M., Savković B.: Programsko i tehničko rešenje virtualne instrumentacije za merenje otpora rezanja pri čeonom glodanju, 2010 Kovač P., Gostimirović M., Sekulić M., Savković B.: Programsko i tehničko rešenje virtualne instrumentacije za merenje otpora rezanja pri bušenju, 2010 Kovač P., Ješić D., Gostimirović M., Savković B., Rodić D.: Uređaj za tribološko ispitivanje kliznih ležajeva od metalnih materijala, polimera i kompozita, 2015 Kovač P., Ješić D., Gostimirović M., Sekulić M., Pucovski (Pucovsky) V.: Uređaj za ispitivanje otpornosti na abraziju po metodi suv pesak i gumeni točak, 2015	13	26.00