Univerzitet u Novom Sadu i Pokrajinski sekretarijat za visoko obrazovanje i naučnoistraživačku delatnost

Karton naučnog radnika

Prezime: Radovanović (Petrović)

Ime: Ljiljana

APVNT broj: 1369

Organizacija: Tehnički fakultet "Mihajlo Pupin" u Zrenjaninu

Produkcija - zbirni rezultati
Oznaka Naziv kriterijuma produkcije Broj Poena
233 401.00
M14
Monografska studija/poglavlje u knjizi M12 ili rad u tematskom zborniku međunarodnog značaja
Monografska studija/poglavlje u knjizi M12 ili rad u tematskom zborniku međunarodnog značaja
Tolmač D., Prvulović Adamović S., Radovanović (Petrović) Lj.: The Results Of Experimental Research Coefficient And Model Heat Transfer Of The Rotating Cylinder, Novi Sad, University of Novi Sad, Faculty of Technical Sciences, 2009, str. 395-401, ISBN 1821-1259, UDK: 62-11:658.512.2(082)

1 3.00
M21
Rad u vodećem međunarodnom časopisu kategorije M21
Rad u vodećem međunarodnom časopisu kategorije M21
Jegdić B., Bobić B., Radojković B., Alić B., Radovanović (Petrović) Lj.: Corrosion resistance of welded joints of X5CrNi18-10 stainless steel, Journal of Materials Processing Technology, 2019, Vol. 266, pp. 579-587, ISSN 0924-0136

Novaković B., Radovanović (Petrović) Lj., Zuber N., Radosav (Stoin) D., Đorđević L., Kavalić (Zakin) M.: Analysis of the influence of hydraulic fluid quality on external gear pump performance, Eksploatacja i Niezawodnosc – Maintenance and Reliability, 2022, Vol. 24, No. 2, pp. 260-268, ISSN 1507-2711

Dobrilović D., Pekez (Ciglić) J., Desnica (Ginin) E., Radovanović (Petrović) Lj., Palinkaš I., Mazalica M., Đorđević L., Mihajlović S.: Data Acquisition for Estimating Energy-Efficient Solar-Powered Sensor Node Performance for Usage in Industrial IoT, Sustainability, 2023, Vol. 15, No. 9, ISSN 2071-1050

Novaković B., Đorđević L., Đurđev M., Radovanović (Petrović) Lj., Zuber N., Desnica (Ginin) E., Bakator M.: Effect of changes in hydraulic parameters and tank capacity of the hydraulic press system on the heating of the hydraulic oil, Eksploatacja i Niezawodnosc – Maintenance and Reliability, 2024, Vol. 26, No. 4, ISSN 1507-2711

Pekez (Ciglić) J., Stojanov J., Mihajlović V., Marčeta (Tasovac) U., Radovanović (Petrović) Lj., Palinkaš I., Vujić (Francuski) B.: The impact analysis of education on raising awareness towards climate change and energy efficiency, International Journal of Technology and Design Education, 2024, ISSN 0957-7572

5 40.00
M22
Rad u međunarodnom časopisu kategorije M22
Rad u međunarodnom časopisu kategorije M22
Prvulović Adamović S., Tolmač D., Radovanović (Petrović) Lj.: Application of Promethee-Gaia Methodology in Choice of Systems for Drying Paltry-Seeds and Powder Materials, Strojniski vestnik - Journal of Mechanical Engineering, 2011, Vol. 57, No. 10, pp. 778-784, ISSN 0039-2480

Jevtić M., Radovanović (Petrović) Lj., Adamović Ž.: Numerical and exsperimental aspects of thermally induced vibration in real rotors, Thermal Science, 2011, Vol. 15, No. 2, pp. 545-558, ISSN 0354-9836

Đurić Ž., Josimović Lj., Adamović Ž., Radovanović (Petrović) Lj., Jovanov G.: An evaluation of formed maintenance programme efficacy, Strojniski vestnik - Journal of Mechanical Engineering, 2012, Vol. 58, No. 5, pp. 300-308, ISSN 0039-2480

Radovanović (Petrović) Lj., Perišić J., Milovanović M., James S., Božilović Z., Momčilović O., Obućinski D.: Modeling of petroleum products sampling processes, Petroleum Science and Technology, 2018, Vol. 36, No. 23, pp. 2003-2010, ISSN 1091-6466

Perišič J., Milovanović M., Petrović I., Radovanović (Petrović) Lj., Ristić M., James S., Perišić V.: Application of a master meter system to assure crude oil and natural gas quality during transportation, Petroleum Science and Technology, 2018, Vol. 36, No. 16, pp. 1222-1228, ISSN 1091-6466

Otić G., Momčilović O., Radovanović (Petrović) Lj., Jovanov G., Radosav (Stoin) D., Pekez (Ciglić) J.: Mathematical Analysis of Criteria for Maintenance of Technical Systems in the Function of Achieving Sustainability, Sustainability, 2021, Vol. 13, No. 4, pp. 1680-1696, ISSN 2071-1050

Novaković B., Radovanović (Petrović) Lj., Đurđev M., Đorđević L., Desnica (Ginin) E.: Analysis of the Behaviour of the Hydraulic Fluid HM VG 32 and HV 32 at Different Operating Conditions of the Axial-Piston Pump, Tehnički vjesnik - Technical Gazette, 2024, Vol. 31, No. 5, pp. 1523-1529, ISSN 1330-3651

Novaković B., Đurđev M., Đorđević L., Drakulović V., Radovanović (Petrović) Lj., Premčevski V.: Predicting Operational Reliability of the Directional Control Valves of the Hydraulic Press System Using Taguchi Method and Regression Analysis, Machines, 2025, Vol. 13, No. 12, ISSN 2075-1702

8 40.00
M23
Rad u međunarodnom časopisu kategorije M23
Rad u međunarodnom časopisu kategorije M23
Tolmač D., Prvulović Adamović S., Radovanović (Petrović) Lj.: Contribution to the development of technology fog crystallization og sugar – glucoze monohydrate , Hemijska industrija, 2007, Vol. 61, No. 5a, pp. 317-320, ISSN 0367-598X

Prvulović Adamović S., Tolmač D., Radovanović (Petrović) Lj.: Results Research of Energetics Characteristics of Convection Drying , Strojniski vestnik - Journal of Mechanical Engineering, 2008, Vol. 54, No. 9, pp. 639-644, ISSN 0039-2480, UDK: 66.047

Prvulović Adamović S., Tolmač D., Radovanović (Petrović) Lj.: Researching results energetics charakteristics convection drying , Strojniski vestnik - Journal of Mechanical Engineering, 2008, Vol. 54, No. 9, pp. 639-644, ISSN 0039-2480, UDK: 66.047

Trifković S., Pavlović M., Radovanović (Petrović) Lj., Pekez (Ciglić) J., Desnica (Ginin) E.: Analysis of projection of quantity medical waste generation in dependence on influencing factors, HealthMed, 2011, Vol. 5, No. 4/2011, pp. 985-999, ISSN 1840-2291

Desnica (Ginin) E., Radovanović (Petrović) Lj., Speight J.: The role of the bologna process in education of engineering technical professions, Metalurgia international, 2012, Vol. 17, No. 9, pp. 91-96, ISSN 1582-2214

Prvulović Adamović S., Tolmač D., Brkić M., Radovanović (Petrović) Lj.: The analysis of energetic and economic parameters during the utilization of corn grain as a fuel for cereal dryers, Energy sources, Part B, Economics, planning, and policy, 2013, Vol. 8, No. 4, pp. 412-419, ISSN 1556-7249

Ljubojev N., Dukić Mijatović M., Bjelajac Ž., Kozar V., Radovanović (Petrović) Lj.: EU LEGISLATION ON FUEL QUALITY AND ITS IMPLEMENTATION IN THE REPUBLIC OF SERBIA, Journal of the Balkan Tribological Association, 2014, Vol. 20, No. 1, pp. 144-155, ISSN 1310-4772

Ljubojev N., Bjelajac Ž., Dukić Mijatović M., Kozar V., Radovanović (Petrović) Lj.: Implementation of European Legislation on Protection of Noise Emissions in Republic of Serbia with a Particular View on Noise From Motor Vehicles, Journal of the Balkan Tribological Association, 2014, Vol. 20, No. 2, pp. 300-308, ISSN 1310-4772

Tolmač D., Prvulović Adamović S., Lambić M., Tolmač J., Radovanović (Petrović) Lj.: Global Trends on Production and Utilization of Biodiesel, Energy sources, Part B, Economics, planning, and policy, 2014, Vol. 9, No. 2, pp. 130-139, ISSN 1556-7249

Radovanović (Petrović) Lj., Adamović Ž., Speight J.: Risk Analysis for Increasing Safety in Power Plants, Energy sources, Part B, Economics, planning, and policy, 2015, Vol. 10, No. 3, pp. 263-270, ISSN 1556-7249

Brković M., Radovanović (Petrović) Lj., Desnica (Ginin) E., Pekez (Ciglić) J., Adamović Ž.: Analysis of Loss Reduction in Natural Gas Transportation and Distribution , Energy sources, Part B, Economics, planning, and policy, 2015, Vol. 10, No. 2, pp. 214-222, ISSN 1556-7249

Čepić Z., Nakomčić-Smaragdakis B., Miljković B., Radovanović (Petrović) Lj., Đurić S.: Combustion Characteristics of Wheat Straw in a Fixed Bed, Energy Sources Part A-Recovery Utilization and Environmental Effects, 2016, Vol. 38, No. 7, pp. 1007-1013, ISSN 1556-7036

Perišić J., Milovanović M., Petrović I., Radovanović (Petrović) Lj., Ristić M., Bugarčić M., Perišić V.: Brine mixing mobile unit in oil and gas industry - An example of a cost-effective, efficient and environmentally justified technical solution, Energy Sources Part A-Recovery Utilization and Environmental Effects, 2016, Vol. 38, No. 23, pp. 3470-3477, ISSN 1556-7036

Prvulović Adamović S., Josimović Lj., Matić M., Tolmač D., Radovanović (Petrović) Lj.: Resource potential and scope of the use of renewable energy sources in Serbia, Energy sources, Part B, Economics, planning, and policy, 2016, Vol. 11, No. 10, pp. 901-910, ISSN 1556-7249

Prvulović Adamović S., Lambić M., Matić M., Tolmač D., Radovanović (Petrović) Lj., Josimović Lj.: Solar Energy in Vojvodina (Serbia): A Potential, Scope of Use, and Development Perspective, Energy sources, Part B, Economics, planning, and policy, 2016, Vol. 11, No. 12, pp. 1111-1117, ISSN 1556-7249

Pekez (Ciglić) J., Radovanović (Petrović) Lj., Desnica (Ginin) E., Lambić M.: Increase of exploitability of renewable energy sources, Energy sources, Part B, Economics, planning, and policy, 2016, Vol. 11, No. 1, pp. 51-57, ISSN 1556-7249

Tolmač J., Josimović Lj., Prvulović Adamović S., Cvejić R., Radovanović (Petrović) Lj., Blagojević Z., Brkić M.: Results of research on the energetic and economic efficiency of the use of biomass for heating an agricultural farm, Energy sources, Part B, Economics, planning, and policy, 2016, Vol. 11, No. 1, pp. 96-101, ISSN 1556-7249

Nakomčić-Smaragdakis B., Čepić Z., Živančev (Šenk) N., Dorić J., Radovanović (Petrović) Lj.: Use of scrap tires in cement production and their impact on nitrogen and sulfur oxides emissions, Energy Sources Part A-Recovery Utilization and Environmental Effects, 2016, Vol. 38, No. 4, pp. 485-493, ISSN 1556-7036

Kovačević M., Lambić M., Radovanović (Petrović) Lj., Pekez (Ciglić) J., Ilić D., Nikolić N., Kucora I.: Increasing the efficiency by retrofitting gas boilers into a condensing heat exchanger, Energy sources, Part B, Economics, planning, and policy, 2017, Vol. 12, No. 5, pp. 470-479, ISSN 1556-7249

Dejan S., Radovanović (Petrović) Lj., Dragoljub I., Željko B., Tolmač J., Palinkaš I.: Application of the model recognition emergency sheet in order to increase the reliability of the plant in the energy sector, Energy sources, Part B, Economics, planning, and policy, 2017, No. 12:7, pp. 635-645, ISSN 1556-7249

Anđelković D., Antić B., Vujanić M., Subotić M., Radovanović (Petrović) Lj.: The perspectives of applying ethanol as an alternate fuel, Energy sources, Part B, Economics, planning, and policy, 2017, Vol. 12, No. 9, pp. 749-758, ISSN 1556-7249

Perišić J., Milovanovic M., Petrović I., Radovanović (Petrović) Lj., Ristić M., Perišić V., Vrbanac M.: Modeling and risk analysis of brine mixing mobile unit operation processes, Energy sources, Part B, Economics, planning, and policy, 2017, Vol. 12, No. 7, pp. 646-653, ISSN 1556-7249

Ristić M., Radovanović (Petrović) Lj., Prokić-Cvetković R., Otić G., Perišić J., Vasović I.: Increase energy efficiency of thermal power plant Kostolac B by revitalization ventilation mills, Energy sources, Part B, Economics, planning, and policy, 2017, Vol. 12, No. 2, pp. 191-197, ISSN 1556-7249

Kovačević M., Lambić M., Radovanović (Petrović) Lj., Kucora I., Ristić M.: Measures for Increasing Consumption of Natural Gas, Energy sources, Part B, Economics, planning, and policy, 2017, Vol. 12, No. 5, pp. 443-451, ISSN 1556-7249

Kucora I., Radovanović (Petrović) Lj., Milošević D., Vulović S., Kovačević M., Otić G., Adamović Ž.: Increasing Safty of Power Plant Using a New Model of Reliability, Energy sources, Part B, Economics, planning, and policy, 2017, Vol. 12, No. 5, pp. 460-469, ISSN 1556-7249

Kucora I., Paunjorić P., Tolmač J., Vulović M., Speight J., Radovanović (Petrović) Lj.: Coke Formation in Pyrolysis Funaces in the Petrochemical Industry, Energy sources, Part B, Economics, planning, and policy, 2017, Vol. 35, No. 3, pp. 213-221, ISSN 1556-7249

Kucora I., Radovanović (Petrović) Lj., Milošević D., Vulović S., Kovačević M., Otić G., Adamović Ž.: Increasing Safety of Power Plant Using a New Model of Reliability, Energy sources, Part B, Economics, planning, and policy, 2017, Vol. 12, No. 5, pp. 460-469, ISSN 1556-7249

Kovačević M., Lambić M., Radovanović (Petrović) Lj., Kucora I., Ristić M.: Measures for increasing consumption of natural gas, Energy sources, Part B, Economics, planning, and policy, 2017, Vol. 12, No. 5, pp. 443-451, ISSN 1556-7249

Ašonja A., Desnica (Ginin) E., Radovanović (Petrović) Lj.: Energy efficiency analysis of corn cob used as a fuel, Energy sources, Part B, Economics, planning, and policy, 2017, Vol. 12, No. 1, pp. 1-7, ISSN 1556-7249

Prvulović Adamović S., Tolmač D., Matić M., Radovanović (Petrović) Lj., Lambić M.: Some Aspects of The Use of Solar Energy in Serbia , Energy sources, Part B, Economics, planning, and policy, 2018, Vol. 13, No. 4, pp. 234-245, ISSN 1556-7249

Ljubojev N., Pekez (Ciglić) J., Radovanović (Petrović) Lj.: Wind energy in Serbia: Harmonization with the legislation of the European Union , Energy sources, Part B, Economics, planning, and policy, 2018, Vol. 13, No. 9-10, pp. 375-382, ISSN 1556-7249

Radovanović (Petrović) Lj.: Some aspects of the use of solar energy in Serbia, Energy sources, Part B, Economics, planning, and policy, 2018, Vol. 13, No. 4, pp. 237-245, ISSN 1556-7249

Brtka V., Makitan (Jevtić) V., Radovanović (Petrović) Lj., Živković Z., Momčilović O.: Rough sets-based prediction model for increasing safety of thermal power plants, Energy sources, Part B, Economics, planning, and policy, 2019, Vol. 14, No. 3, pp. 67-79, ISSN 1556-7249

33 103.00
M33
Saopštenje sa međunarodnog skupa štampano u celini
Saopštenje sa međunarodnog skupa štampano u celini
Sajfert Z., Radovanović (Petrović) Lj.: THE ROLE OF MANAGEMENT INFORMATION SYSTEM IN INDUSTRIAL ENGINEERING , 3. International Symposium of Industrial engineering, Beograd: Faculty of Mechanical Engineering, 2001, pp. 78-80, ISBN 86-7083--414-6

Adamović Ž., Radovanović (Petrović) Lj.: EFFECTIVE SYSTEMS FOR VIBRATION ANALISY AND PREDICTIVE MAINTENANCE APPLICATIONS , 3. International Conference Research and Development in Mechanical Industry - RaDMI, Herceg Novi: Trstenik: High Technical Mechanical School, Kruševac: Institute IMK "14. October" and Podgorica: Institute of Faculty of Mechanical Engineering, 19-23 September, 2003, pp. 828-832, ISBN 86-83803-07-4

Radovanović (Petrović) Lj.: COMPUTERIZED MAINTENANCE MANAGEMENT SYSTEMS (CMMS) AND EFFECTIVE MAINTENANCE , 3. International Conference Research and Development in Mechanical Industry - RaDMI, Herceg Novi: Trstenik: High Technical Mechanical School, Kruševac: Institute IMK "14. October" and Podgorica: Institute of Faculty of Mechanical Engineering, 19-23 September, 2003, pp. 883-887, ISBN 86-83803-07-4.

Radovanović (Petrović) Lj., Radovanovic S.: THE MAINTENANCE STRATEGIES OF AGRICULTURAL MACHINES , 3. International Conference Research and Development in Mechanical Industry - RaDMI, Herceg Novi: Trstenik: High Technical Mechanical School, Kruševac: Institute IMK "14. October" and Podgorica: Institute of Faculty of Mechanical Engineering, 19-23 September, 2003, pp. 887-892, ISBN 86-83803-07-4

Adamović Ž., Radovanović (Petrović) Lj.: ACTUAL APPROACHES TO THE SYSTEM MAINTENANCE , 3. International Conference Research and Development in Mechanical Industry - RaDMI, Herceg Novi: Trstenik: High Technical Mechanical School, Kruševac: Institute IMK "14. October" and Podgorica: Institute of Faculty of Mechanical Engineering, 19-23 September, 2003, pp. 824-828, ISBN 86-83803-07-4

Radovanović (Petrović) Lj., Adamović Ž.: COMPUTERIZED MAINTENANCE MANAGEMENT SYSTEMS (CMMS) AND PREVENTIVE MAINTENANCE IMS 2004, 4th INTERNACIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING SYSTEMS , 4. International Symposium on Intelligent Manufacturing Systems - IMS, Sakarya: Sakarya University, Department of Industrial Engineering, 6-8 September, 2004, pp. 192-198

Adamović Ž., Radovanović (Petrović) Lj.: Modern Access Maintenance Total to Universal Reducer , 8. ICDQM, Beograd: DQM, Izdavački centar za upravljanje kvalitetom i pouzdanošću, 15-16 June, 2005, pp. 248-253, ISBN 1451-4966, UDK: 658.56

Tolmač D., Prvulović Adamović S., Radovanović (Petrović) Lj.: Ekonomska opravdanost primene briketa za grejanje manjih zgrada, 36. Međunarodni kongres o klimatizaciji, grejanju i hlađenju, Beograd: Beograd, 30-2 November, 2005, pp. 363-369

Radovanović (Petrović) Lj., Adamović Ž.: MACHINE CONDITION MONITORING SYSTEMS AND PREDICTIVE MAINTENANCE APPLICATIONS ECOTRIB 2007, Joint European Conference on Tribology and Final conference of COST 532 Action: Triboscience and Tribotechnology , Proceedings of the European Conference on Tribology and Final conference COST 532 action , 1. Joint European Conference on Tribology and Final Conference of COST 532 action (ECOTRIB), Ljubljana: Slovenian Society for Tribology, Ljubljana, 12-15 June, 2007, pp. 1045-1051, ISBN 978-90254-8-2, UDK: 621.89 (063) (082),662.6/.8 (063) (082),665.7 (063) (082),504.5 (063) (082)

Tolmač D., Radovanović (Petrović) Lj., Prvulović Adamović S., Živković Ž.: Projektovanje i planiranje rada proizvodnog sistema sa aspekta održavanja, 10. International Conference DEPENDABILITY AND QUALITY MANAGEMENT ICDQM, Beograd: DQM, Istraživački centar za upravljanje kvalitetom i pouzdanošću, 20-21 June, 2007, pp. 390-397, ISBN 1451-4966, UDK: 658.56

Tolmač D., Prvulović Adamović S., Radovanović (Petrović) Lj.: The suplement to the transport and drying development of dextrose-sugar, 9. International Symposium Interdisciplinary Regional Research - ISIRR, Novi Sad, 2007, pp. 1-6

Tolmač D., Prvulović Adamović S., Radovanović (Petrović) Lj.: The suplement to the transport and warehousing development of edible oil, 11. Trends in the development of Machinery and Associated technology Conference, Hammamet, 5-11 September, 2007

Radovanović (Petrović) Lj., Adamović Ž.: THE DEVELOPMENT OF MAINTENANCE OF TECHNIC SYSTEMS IN EUROPEAN INDUSTRY , 9. International Symposium Young people and multidisciplinary research, Timisoara, 15-16 November, 2007

Prvulović Adamović S., Tolmač D., Radovanović (Petrović) Lj.: Projektovanje i metode analize sistema, 11. YUPMA, Zlatibor: Udruženje za upravljanje projektima Srbije - YUPMA, 6-8 June, 2007, pp. 410-414, ISBN 978-86-86385-02-4

Tolmač D., Prvulović Adamović S., Radovanović (Petrović) Lj.: Reingenering and development of investment projects in grain adaptation industry, 0. International Industrial Conference "MTM" - Machines, Technologies, Materials, Sofija: Scientific – Technical Union of Mechanical Engineering, Bulgaria, 28-29 March, 2007

Radovanović (Petrović) Lj., Adamović Ž.: MAINTENANCE STRATEGY AND MODELS FOR CONDITION BASED MONITORING The Fifth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies CM 2008 / MFPT 2008 , 5. International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, Edinburgh: The Edinburgh Conference Centre Heriot-Watt University Edinburgh, Scotland, Coxmoor Publishing Company Oxford, UK, 15-18 June, 2008, pp. 1200-1210, ISBN 978-1-901892-31-4

Tolmač D., Prvulović Adamović S., Radovanović (Petrović) Lj.: The Effects of Thermal Objects on Environment, 2. Međunarodni simpozijum "Zaštita životne sredine u industrijskim područjima", Kosovska Mitrovica: University in Priština, Faculty of Technical Sciences, 24-29 April, 2009, pp. 67-73, ISBN 987-86-80893-23-5

Adamović Ž., Radovanović (Petrović) Lj., Mihajlovic D., Parabuca D.: The Resonance of Axial Fan , 2. European Conference on Tribology ECOTRIB, Pisa: University of Pisa, Italy,, 7-10 June, 2009, pp. 7-10, ISBN 978-884672426-7

Tolmač D., Prvulović Adamović S., Radovanović (Petrović) Lj.: Environmental Protection Measures in the Industry From Explosion Organic Dust, 2. Međunarodni simpozijum "Zaštita životne sredine u industrijskim područjima", Kosovska Mitrovica: University in Priština, Faculty of Technical Sciences, 24-29 April, 2009, pp. 257-262, ISBN 987-86-80893-23-5

Radovanović (Petrović) Lj., Pekez (Ciglić) J., Adamović Ž.: Implementation of condition-based maintenance for machinery dijagnostic, 11. International Symposium "Young People and Interdisciplinary Research", Timisoara, 12-13 November, 2009, pp. 68-82, ISBN 1224-6077

Pekez (Ciglić) J., Radovanović (Petrović) Lj., Lambić M.: Monitoring solar heating systems with the aim of improvement of energetic efficiency, 11. International Symposium "Young People and Interdisciplinary Research", Timisoara, 12-13 November, 2009, pp. 69-74, ISBN 1224-6077

Adamović Ž., Radovanović (Petrović) Lj., Desnica (Ginin) E., Pekez (Ciglić) J.: Aplication of the maintenance methods according to the condition in organization managemant, 1. EMC 2011, Zrenjanin, 24-25 June, 2011, pp. 185-190, ISBN 978-86-7672-135-1

Brković M., Radovanović (Petrović) Lj., Desnica (Ginin) E., Pekez (Ciglić) J., Adamović Ž.: Process management of gas distribution from the aspect of reducing losses, 1. International Conference: Process Technology And Environmental Protection (PTEP), Zrenjanin, 7 December, 2011, pp. 346-351, ISBN 978-86-7672-152-8

Pekez (Ciglić) J., Radovanović (Petrović) Lj., Desnica (Ginin) E., Lambić M., Stojadinović S., Adamović Ž.: Renewable energy as a solution for climate changes, 1. International conference "Ecology of urban areas 2011", Zrenjanin: Tehnički fakultet "Mihajlo Pupin", 30 September, 2011, pp. 393-397, ISBN 978-86-7672-145-0

Radovanović (Petrović) Lj., Pekez (Ciglić) J., Adamović Ž.: Rotor Condition Monitoring for Evaluation of Safe Functioning of Turboaggregat, 3. European Conference on Tribology - ECOTRIB, Wien, 7-9 June, 2011, pp. 603-604, ISBN 978-3-901657-38-2

Adamović Ž., Radovanović (Petrović) Lj., Pekez (Ciglić) J.: The impact of information on information systems, 1. ITRO - International Conference on Information Tecnology and Development of Education, Zrenjanin: Tehnički fakultet "Mihajlo Pupin", 1 July, 2011, pp. 391-395, ISBN 978-86-7672-134-4

Radovanović (Petrović) Lj., Adamović Ž.: Maintenance diagnostic model for ventilation mill of thermal power plant, 1. International Conference: Process Technology And Environmental Protection (PTEP), Zrenjanin, 7 December, 2011, pp. 167-172, ISBN 978-86-7672-152-8

Adamović Ž., Radovanović (Petrović) Lj., Desnica (Ginin) E., Pekez (Ciglić) J., Spirić Z.: The Mapping the railroad Noise according to Standards, 2. International Conference “Ecology of urban areas 2012”, Zrenjanin: Tehnički fakultet "Mihajlo Pupin", 15 October, 2012, pp. 326-323, ISBN 978-86-7672-172-6

Desnica (Ginin) E., Letić D., Radovanović (Petrović) Lj., Pekez (Ciglić) J.: Higher education of technical engineers in line with the Bologna process, 2. ITRO - International Conference on Information Tecnology and Development of Education, Zrenjanin: Technical Faculty “Mihajlo Pupin”, Zrenjanin, 29 June, 2012, pp. 33-38, ISBN 978-86-7672-167-2

Ilić B., Adamović Ž., Radovanović (Petrović) Lj., Savić B., Stanković N.: Thermographic investigations of power plant elements, 5. International Symposium on Industrial Engineering (SIE), Beograd, 14-15 June, 2012, pp. 291-296, ISBN 978-86-7083-758-4

Ilić B., Adamović Ž., Radovanović (Petrović) Lj., Savić B., Stanković N.: Application of the method of thermography in diagnostics of power plants, 2. International Conference Industrial Engineering and Environmental Protection - IIZS, Zrenjanin, 31 October, 2012, pp. 157-164, ISBN 978-86-7672-184-9

Radovanović (Petrović) Lj., Desnica (Ginin) E., Pekez (Ciglić) J.: Logistička podrška održavanju tehničkih sustava, 22. Međunarodni znanstveni stručni skup Organizacija i tehnologija održavanja - OTO, Osijek: Društvo održavatelja Osjek, Elektrotehnički fakultet Osjek, HEP ODS d.o.o. Elektroslavonija Osjek, 26 April, 2013, pp. 111-117, ISBN 978-953-6032-79-2, UDK: 681.501

Desnica (Ginin) E., Nikolić M., Terek Stojanović E., Radovanović (Petrović) Lj.: Ecological aspects of engineering design, 3. International Conference "Ecology of Urban Areas", Zrenjanin, 11 October, 2013, pp. 497-501, ISBN 978-86-7672-210-5

Terek Stojanović E., Adamović Ž., Radovanović (Petrović) Lj.: Emotional intelligence of employees in companies in Serbia , 3. EMC-International Symposium Engeneering Management and Competiteveness, Zrenjanin: Tehnički fakultet "Mihajlo Pupin", 21-22 June, 2013, pp. 557-561

Kavalić (Zakin) M., Radovanović (Petrović) Lj.: CITIZENS' AWARENESS ON GEOTHERMAL ENERGY IN THE TOWN OF ZRENJANIN, 2. International Conference Industrial Engineering and Environmental Protection - IIZS, Zrenjanin: Technical faculty “Mihajlo Pupin”, Zrenjanin, 30 October, 2013, pp. 435-441, ISBN 978-86-7672-208-2

Kavalić (Zakin) M., Radovanović (Petrović) Lj., Pekez (Ciglić) J., Adamović Ž., Kucora I.: AWARENESS ON WASTE MANAGEMENT IN THE CITY OF ZRENJANIN, 3. International Conference "Ecology of Urban Areas", Zrenjanin: Faculty of Technical Sciences Mihajlo Pupin, Zrenjanin, 11 October, 2013, pp. 165-172, ISBN 978-86-7672-209-9

Kavalić (Zakin) M., Radovanović (Petrović) Lj., Ramić E., Marčeta (Tasovac) U., Paunović O.: JUSTIFICATION FOR USE OF GEOTHERMAL ENERGY IN SERBIA, 4. International Conference Industrial Engineering and Environmental Protection - IIZS, Zrenjanin: Technical faculty “Mihajlo Pupin”, Zrenjanin, 30 September, 2014, pp. 28-33, ISBN 978-86-7672-234-1, UDK: COBISS.SR-ID 290244871

Palinkaš I., Desnica (Ginin) E., Pekez (Ciglić) J., Radovanović (Petrović) Lj.: Plasma cuting - aplication of CAD-CAM tools and advantages of robotics comparing to CNC machine, 2. International Scientific Conference "Conference on Mechanical Engineering Technologies and Applications" - COMETa, Jahorina: Univerzitet u Istočnom Sarajevu. Mašinski fakultet Istočno Sarajevo, 2-5 December, 2014, pp. 135-140, ISBN 978-99976-623-2-3

Kucora I., Radovanović (Petrović) Lj., Pekez (Ciglić) J.: Tehnička dijagnostika cijevnih snopova peći za pirolizu benzina-destruktivna metoda, 23. Međunarodni znanstveno stručni skup - Organizacija i tehnologija održavanja - OTO `2014, Požega (Slavonska): Društvo održavatelja Osjek, Elektrotehnički fakultet Osjek, HEP ODS d.o.o. Elektroslavonija Osjek, 24-25 April, 2014, pp. 95-102, ISBN 978-953-6032-84-6

Kavalić (Zakin) M., Radovanović (Petrović) Lj., Filipov V.: EFFECTS OF EMPLOYEES STRESS IN THE PROCESS OF CHANGE MANAGEMENT, 4. EMC-International Symposium Engeneering Management and Competiteveness, Zrenjanin: Technical faculty “Mihajlo Pupin”, Zrenjanin, 20-1 June, 2014, pp. 200-205, ISBN 978-86-7672-224-2, UDK: COBISS.SR - ID 286665991

Simić M., Kazi (Eremić) Lj., Radulović (Ćurić) B., Glušac (Krajovan) D., Kavalić (Zakin) M., Milanov D., Radovanović (Petrović) Lj., Karuović (Naumov) D., Pecev P.: Alumni Records Web Application, 3. International conference on applied internet and information technologies, Zrenjanin, 24 October, 2014, pp. 61-65, ISBN 978-86-7672-247-1, UDK: COBISS.SR-ID 290967047

Perišić J., Radovanović (Petrović) Lj., Desnica (Ginin) E., Pekez (Ciglić) J., Palinkaš I.: Monitoring of Temperature Distribution in Ventilation Mill in Thermal Power Plant, 17. International Symposium "Young people and multidisciplinary research", Timisoara: Editura Politehnica, 12-13 November, 2015, pp. 3-9, ISBN 1843-6609

Kavalić (Zakin) M., Radovanović (Petrović) Lj., Mošorinski P., Đurica Lapadat M.: Function of human resources in the purpose of impruving the knowledge management, 5. Engineering Management and Competitiveness: EMC 2015, Zrenjanin, 2015, pp. 180-187, ISBN 978-86-7672-256-3

Radovanović (Petrović) Lj., Palinkaš I., Adamović Ž.: Značaj planiranja održavanja s aspekta smanjenja broja otkaza struga, 24. Međunarodni znanstveno sturčni skup Organizacija i tehnologija održavanja - OTO, Donji Miholjac, 17-18 May, 2015, pp. 99-108, ISBN 978-953-7973-07-0

Radovanović (Petrović) Lj., Palinkaš I., Kucora I.: Suvremeni pristup dijagnostici tehničkih sustava, 25. Međunarodni znanstveni stručni skup Organizacija i tehnologija održavanja - OTO, Osijek: Društvo održavatelja Osijek; Alberta - Osijek, 22 April, 2016, pp. 41-50, ISBN 978-953-7973-13-1

Palinkaš I., Šikić B., Radovanović (Petrović) Lj., Desnica (Ginin) E., Pekez (Ciglić) J.: Research on Reliability of Motor Vehicle, 16. International Conference on “Modern Trends in Engineering & Technology” - MTET-16, Istanbul, 18-19 April, 2016, pp. 112-117, ISBN 978-93-84468-49-1

Radovanović (Petrović) Lj., Desnica (Ginin) E., Pekez (Ciglić) J.: Importance of performance brake system features reliability , 25. Međunarodni znanstveni stručni skup Organizacija i tehnologija održavanja - OTO, Osijek: Društvo održavatelja Osijek, Alberta - Osijek, 22 April, 2016, pp. 57-64, ISBN 978-953-7973-13-1

Novaković B., Radovanović (Petrović) Lj., Pekez (Ciglić) J., Kavalić (Zakin) M.: Application of preventive maintenance on passenger vehicle braking systems, 26. Međunarodni znanstveni stručni skup Organizacija i tehnologija održavanja - OTO, Osijek: Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 26 May, 2017, pp. 177-182, ISBN 978-953-6032-92-1

Vukobrat B., Novaković B., Radovanović (Petrović) Lj., Kavalić (Zakin) M., Stanisavljev (Zec) S.: The influence of technical inspection on the safety of motor vehicles, 8. International Conference Industrial Engineering and Environmental Protection - IIZS, Zrenjanin, 11-12 October, 2018, pp. 531-539, ISBN 978-86-7672-309-6

Palinkaš I., Pekez (Ciglić) J., Desnica (Ginin) E., Radovanović (Petrović) Lj.: Application of modern technology for increasing expertise of employees in mechanical industry, 4. International Scientific Conference "Conference on Mechanical Engineering Technologies and Applications" - COMETa, Jahorina: University of east Sarajevo Faculty of Mechanical Engineering, 27-30 November, 2018, pp. 221-228, ISBN 978-99976-719-4-3

Radovanović (Petrović) Lj., Pekez (Ciglić) J., Desnica (Ginin) E., Palinkaš I., Dragoljub I.: Application of non-destructive methods in the diagnostics of the turbine shaft in the hydroelectric power plant , 4. International Scientific Conference "Conference on Mechanical Engineering Technologies and Applications" - COMETa, Jahorina: University of east Sarajevo Faculty of Mechanical Engineering, 27-30 November, 2018, pp. 635-642, ISBN 978-99976-719-4-3

Novaković B., Radovanović (Petrović) Lj., Pekez (Ciglić) J.: Predictive maintenance measures for components of diesel electric aggregates, 27. Međunarodni znanstveni stručni skup Organizacija i tehnologija održavanja - OTO, Osijek, 13 April, 2018, pp. 59-65, ISBN 978-953-6032-97-6

Palinkaš I., Desnica (Ginin) E., Pekez (Ciglić) J., Radovanović (Petrović) Lj.: Modern approaches on construction optimization in mechanical engineering, 10. INTERNATIONAL NATURAL GAS, HEAT AND WATER CONFERENCE, Osijek: Strojarski fakultet u Slavonskom Brodu, 25-28 September, 2019, pp. 260-264

Čepić Z., Radovanović (Petrović) Lj., Vujić (Francuski) B., Pekez (Ciglić) J., Adamović D., Radonjić J.: Impact of use waste tires in cement production on SO2 emission , 2. IJCELIT 2017 - International Joint Conference on Enviromental and Light Industry Technologies, Budimpešta: Obuda University Faculty of Light Industry and Environmental Engineering, 21-22 November, 2019, pp. 234-238, ISBN 978-963-449-64-4

Šinik V., Despotović Ž., Radovanović (Petrović) Lj., Đurđev M., Novaković B., Tolmač J., Palinkaš I.: Some Aspects of the Electrical Power Quality, 9. International Conference Industrial Engineering and Environmental Protection - IIZS, Zrenjanin: Technical faculty "Mihajlo Pupin", 3-4 October, 2019, pp. 183-191, ISBN 978-86-7672-324-9

Čepić Z., Lazendić T., Bibić (Đorđević) D., Ubavin D., Radovanović (Petrović) Lj.: Analysis of causes of serious and fatal occupational injuries in the Republic of Serbia for the period from 2016 to 2018, 9. International Conference Industrial Engineering and Environmental Protection - IIZS, Zrenjanin: Technical Faculty “Mihajlo Pupin”, Zrenjanin, University of Novi Sad, 3-4 October, 2019, pp. 545-549, ISBN 978-86-7672-324-9

Čepić Z., Lazendić T., Ilić Mićunović M., Ubavin D., Radovanović (Petrović) Lj.: Impact of exposure to metalworking fluid aerosols on employees health, 9. International Conference Industrial Engineering and Environmental Protection - IIZS, Zrenjanin: Technical Faculty “Mihajlo Pupin”, Zrenjanin, University of Novi Sad, 3-4 October, 2019, pp. 550-556, ISBN 978-86-7672-324-9

Čepić Z., Radovanović (Petrović) Lj., Vujić (Francuski) B., Pekez (Ciglić) J., Adamović D., Radonić (Jakšić) J.: Impact of use waste tires in cement production on SO2 emission, 2. IJCELIT 2017 - International Joint Conference on Enviromental and Light Industry Technologies, Budimpešta: Faculty of Light Industry and Environmental Engineering, Obuda University, Budapest, Hungary, 21-22 November, 2019, pp. 234-238, ISBN 978-963-449-64-4

Vujić (Francuski) B., Pekez (Ciglić) J., Mihajlović V., Radovanović (Petrović) Lj., Marčeta (Tasovac) U., Palinkaš I.: THE IMPORTANCE OF RAISING AWARENESS OF ENVIRONMENTAL BEHAVIOR, ENVIRONMENTAL PROTECTION AND CLIMATE CHANGE IN THE APV, 9. International Conference Industrial Engineering and Environmental Protection - IIZS, Zrenjanin: TF "Mihajlo Pupin", 3-4 October, 2019, pp. 492-496, ISBN 978-86-7672-324-9

Vujić (Francuski) B., Marčeta (Tasovac) U., Mihajlović V., Pekez (Ciglić) J., Radovanović (Petrović) Lj., Palinkaš I.: Climate change concern and communication patterns within young people and their parents, 11. ICEEE-International Conference „Global Environmental Change and Population Health: Progress and Challenges”, Budimpešta: Óbuda University, 19-20 November, 2020, pp. 120-127, ISBN 1849-0638

Radosav (Stoin) D., Desnica (Ginin) E., Prvulović Adamović S., Radovanović (Petrović) Lj., Pekez (Ciglić) J., Šinik V., Palinkaš I.: DEVELOPMENT OF INNOVATIVE AND ENTREPRENEURIAL COMPETENCIES OF FUTURE ENGINEERS THROUGH THE ITlab PROJECT AT THE TECHNICAL FACULTY “MIHAJLO PUPIN” ZRENJANIN, 10. International Conference Industrial Engineering and Environmental Protection - IIZS, Zrenjanin, 8-9 October, 2020, pp. 30-35, ISBN 978-86-7672-340-9

Novaković B., Radovanović (Petrović) Lj., Žikić D., Vlačić S.: Conditional monitoring in industry 4.0, 10. EMC-International Symposium Engeneering Management and Competiteveness, Zrenjanin: Tehnički fakultet "Mihajlo Pupin" , 19-20 June, 2020, pp. 93-98, ISBN 978-86-7672-334-8

Novaković B., Radovanović (Petrović) Lj., Ivetić R., Šinik V., Đurđev M., Đorđević L.: CBM Concept - Predictive Maintenance - Vibration analysis and balancing process of industrial fans, 10. International Conference Industrial Engineering and Environmental Protection - IIZS, Zrenjanin: Tehnički fakultet "Mihajlo Pupin", 8-9 October, 2020, pp. 208-214, ISBN 978-86-7672-340-9

Novaković B., Radovanović (Petrović) Lj., Žikić D., Pekez (Ciglić) J., Đorđević L.: Use of modern diagnostic methods to identify gear pump failures, 29. Međunarodni znanstveno sturčni skup Organizacija i tehnologija održavanja - OTO, Osijek: Panon – Institut za strateške studije,, 12 December, 2020, pp. 15-19, ISBN 2706-4131

Đorđević L., Novaković B., Pekez (Ciglić) J., Radovanović (Petrović) Lj., Đurđev M.: A brief review of the application of the SPM method in order to improve preventive maintenance of bearings , 10. International Conference Industrial Engineering and Environmental Protection - IIZS, Zrenjanin: TF "Mihajlo Pupin", Zrenjanin, 8-9 October, 2020, pp. 214-218, ISBN 978-86-7672-340-9

Pekez (Ciglić) J., Palinkaš I., Desnica (Ginin) E., Radovanović (Petrović) Lj., Đorđević L.: The possibility of increasing the natural gas quality by elimination of moisture, 11. INTERNATIONAL NATURAL GAS, HEAT AND WATER CONFERENCE, Osijek: Sveučilište u Slavonskom Brodu, 23-26 September, 2020, pp. 39-46

Novaković B., Radovanović (Petrović) Lj., Desnica (Ginin) E., Đorđević L., Đurđev M.: Detection of industrial fan motor bearing faulting by implementation of vibrodiagnostic methods, 11. International Conference Industrial Engineering and Environmental Protection - IIZS, Zrenjanin, 7-8 October, 2021, pp. 212-217, ISBN 978-86-7672-348-5

Novaković B., Desnica (Ginin) E., Radovanović (Petrović) Lj., Đorđević L., Ljajić Z.: CBM concept in the role of designing a new model of a hydraulic press, 11. EMC-International Symposium Engeneering Management and Competiteveness, Zrenjanin, 18-19 June, 2021, pp. 108-113, ISBN 978-86-7672-345-4

Ristić M., Radovanović (Petrović) Lj., Perišić J., Vasović I., Đorđević L.: Analysis of the use of renewable energy sources in the Republic of Serbia, 1. International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH, Zlatibor: Springer, 2-5 July, 2017, ISBN 978-3-030-86008-0

Desnica (Ginin) E., Jakovljević V., Kiss I., Radovanović (Petrović) Lj., Đorđević L.: Techno-Economic Analysis of the Justification of the Machine Part Reparation Procedure on the Excavator https://doi.org/10.1007/978-3-030-92851-3_7, 30. InternationalConference on Organization and Technology of Maintenance - OTO, Osijek: Springer, 10-11 December, 2021, pp. 92-103, ISBN 978-3-030-92850-6

Desnica (Ginin) E., Pekez (Ciglić) J., Dobrilović D., Radovanović (Petrović) Lj., Radosav (Stoin) D., Đorđević L., Mazalica M., Mihajlović S.: Research in the field of renewable energy through the application of modern ICT technologies, 6. International Scientific Conference "Conference on Mechanical Engineering Technologies and Applications" - COMETa, Jahorina: Mašinski fakultet, 17-19 November, 2022, pp. 712-718, ISBN 978-99976-947-6-8

Novaković B., Radovanović (Petrović) Lj., Đorđević L., Đurđev M.: Condition monitoring of industrial system from the vibration aspect, 26. International Conference on Noise and Vibration, Niš: University of Niš, Faculty of Occupational Safety, 2022, pp. 151-153, ISBN 978-86-6093-111-7

Novaković B., Ristić M., Radovanović (Petrović) Lj., Đorđević L., Perišić J.: Dynamic Balance and Alignment of Rotary Machines with Vibration Parameter Control, 1. International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH, Zlatibor: Innovation Center of Faculty of Mechanical Engineering, 2-5 July, 2017, ISBN 978-86-6060-120-1

Radosav (Stoin) D., Desnica (Ginin) E., Dobrilović D., Pekez (Ciglić) J., Radovanović (Petrović) Lj., Mazalica M., Mihajlović S., Đorđević L.: Possibility of Using Solar Energy Sources Within of Smart Technologies, 12. International Conference on Applied and Information Technologies, Zrenjanin: Technical faculty “Mihajlo Pupin”, 14 October, 2022, pp. 167-170, ISBN 978-86-7672-361-4

Novaković B., Radovanović (Petrović) Lj., Pekez (Ciglić) J., Žikić D., Vidaković D.: Praćenje parametara funkcije hidraulične prese, 26. International scientific and profesional conference Maintenance - MeditMaint, Rovinj: HDO-Hrvatsko druütvo održavatelja, 11-13 October, 2021, pp. 104-107, ISBN 1848-4867

Jarčević D., Radovanović (Petrović) Lj., Pekez (Ciglić) J., Novaković B., Glavaš H.: The Influence of Preventive Maintenance of Batteries on Increasing the Security of the Thermal Power System, 31. InternationalConference on Organization and Technology of Maintenance - OTO, Osijek: Springer, Cham, 12 December, 2002, pp. 96-105, ISBN 978-3-031-21429-5

Desnica (Ginin) E., Ašonja A., Radovanović (Petrović) Lj., Palinkaš I., Kiss I.: Selection, Dimensioning and Maintenance of Roller Bearings, 31. InternationalConference on Organization and Technology of Maintenance - OTO, Osijek, 12 December, 2002, pp. 133-142, ISBN ISSN 2367-3370

Desnica (Ginin) E., Mihajlović V., Radovanović (Petrović) Lj., Dzitac S., Pekez (Ciglić) J.: INTERNATIONAL ACTIVITIES OF MECHANICAL ENGINEERING STUDENTS AT THE TECHNICAL FACULTY "MIHAJLO PUPIN" ZRENJANIN, 13. International Conference Industrial Engineering and Environmental Protection - IIZS, Zrenjanin: Tehnicki fakultet MIhajlo Pupin, 5-6 October, 2023, ISBN 978-86-7672-368-3

Novaković B., Radovanović (Petrović) Lj., Đorđević L., Đurđev M., Bakator M.: Scientific-Educational Application of Laser Alignment in Developing Engineering Students' Skills , 14. ITRO - International Conference on Information Tecnology and Development of Education, Zrenjanin: Technical faculty “Mihajlo Pupin”, 24 November, 2023, pp. 230-233, ISBN 978-86-7672-372-0

Novaković B., Đorđević L., Radovanović (Petrović) Lj., Bakator M., Marković M., Ugrinov S., Đurđev M.: The Examination of Operational Condition Through the Volumetric Efficiency of an Axial Piston Pump, 14. International Conference Industrial Engineering and Environmental Protection, Zrenjanin: Technical faculty “Mihajlo Pupin”, 3-4 October, 2024, pp. 158-163, ISBN 978-86-7672-376-8

Radnović J., Radovanović (Petrović) Lj., Novaković B.: Reliability of the biogas plant, 14. International Conference Industrial Engineering and Environmental Protection, Zrenjanin: Tehnički fakultet "Mihajlo Pupin" Zrenjanin, 3-4 October, 2024, pp. 156-164, ISBN 978-86-7672-368-3

Radovanović (Petrović) Lj., Novaković B., Đurđev M., Đorđević L.: Preventive Maintenance of Hydraulic Press Using Magnetic Testing, 32. InternationalConference on Organization and Technology of Maintenance - OTO, Zagreb: Springer Nature, 12 December, 2023, pp. 330-341, ISBN 978-3-031-51494-4

Marković M., Desnica (Ginin) E., Novaković B., Radovanović (Petrović) Lj., Pekez (Ciglić) J.: The Influence of Design Parameters on Fluid Leakage in Axial Piston Pumps: A Review and Optimization Opportunities, 34. International Conference on Organization and Technology of Maintenance (OTO), Osijek: MDPI, 12 December, 2025, pp. 1-8

83 83.00
M34
Saopštenje sa međunarodnog skupa štampano u izvodu
Saopštenje sa međunarodnog skupa štampano u izvodu
Mošorinski P., Pekez (Ciglić) J., Palinkaš I., Desnica (Ginin) E., Radovanović (Petrović) Lj.: Temperature analysis of thermoplastic machining for optimization turning process, 3. Central and Eastern Conference on Thermal Analysis and Calorimetry, Ljubljana, 25-28 August, 2015, ISBN 978-3-940237-34-7

Pekez (Ciglić) J., Palinkaš I., Desnica (Ginin) E., Radovanović (Petrović) Lj., Lambić M.: Increasing the efficiency of solar collectors in dynamic conditions, 6. International Congress of Energy and Environment Engineering and Management, Pariz: ScienceKNOW Conferences C.B., 22-24 July, 2015, pp. 108-108, ISBN 978-84-944311-2-8

Terek Stojanović E., Kavalić (Zakin) M., Radovanović (Petrović) Lj., Ljubojev N.: Implementation of the European Legislation and Monitoring of Traffic Noise Aimed at Protecting Human Health in Serbia,, 6. nternational Congress of Energy and Environment Engineering and Management (CIIEM), Paris, 22-24 July, 2015, pp. 219-219, ISBN 978-84-944311-2-8

Stankov S., Borić S., Tolmač J., Radovanović (Petrović) Lj.: The importance of packaging waste generated by individual users for the safety of people and the environment, 29. Međunarodni kongres o procesnoj industriji "Procesing 16", Beograd: Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije (SMEITS), Društvo za procesnu tehniku Beograd, Srbija, 2-3 June, 2016, ISBN 978-86-81505-81-6 1

Ljubojev N., Pekez (Ciglić) J., Radovanović (Petrović) Lj., Palinkaš I.: Potential and development of wind energy in the Republic of Serbia, 5. 5th Central and Eastern European Conference on Thermal Analysis and Calorimetry & 14th Mediterranean Conference on Calorimetry and Thermal Analysis (CEEC-TAC5 & Medicta2019), Rim: Central and Eastern European Committee for Thermal Analysis and Calorimetry (CEEC-TA), 27-30 August, 2019, pp. 464-464, ISBN 978-3-940237-59-0

5 2.50
M42
Monografija nacionalnog značaja
Monografija nacionalnog značaja
Adamović Ž., Radovanović (Petrović) Lj., Jevtic N.: Održavanje hidrauličnih i pneumatskih sistema , Zrenjanin, Tehnički fakultet "Mihajlo Pupin", 2006, ISBN 86-7672-055-X, UDK: UDC: 621. 22 (075.8) , 621. 5 (075.8)

Prvulović Adamović S., Tolmač D., Blagojević Z., Radovanović (Petrović) Lj.: Teorija projektovanja sistema - projektovanje, investicije, reinženjering , Zrenjanin, Tehnički fakultet "M. Pupin", 2007, ISBN 86-7672-070-3

2 10.00
M51
Rad u vodećem nacionalnom časopisu kategorije M51
Rad u vodećem nacionalnom časopisu kategorije M51
Prvulović Adamović S., Tolmač D., Lambić M., Radovanović (Petrović) Lj.: Efects of Heat Transfer in a Horizontal Rotating Cyilinder of the Contact Dryer , Facta Universitatis Series Physical Education And Sport, 2007, Vol. 5, No. 1, pp. 47-61, ISSN 1451-740X, UDK: 536.24 : 66.047

Tolmač D., Prvulović Adamović S., Radovanović (Petrović) Lj.: Effect of Heat Transfer on Convection Dryer with Pneumatic Transport of Material , FME Transactions, 2008, Vol. 36, No. 1, pp. 45-49, ISSN 1451-2092

Prvulović Adamović S., Tolmač D., Radovanović (Petrović) Lj.: Analiza efekata investicionih ulaganja u industriji prerađevina od kukuruza , Savremena poljoprivredna tehnika, 2008, Vol. 34, No. 1-2, pp. 13-19, ISSN 0350-2953, UDK: 631 (05)

Prvulović Adamović S., Tolmač D., Živković Ž., Radovanović (Petrović) Lj.: Multi-Criteria Decision in the Choice of Advertising Tools , Facta universitatis - series: Mechanical Engineering, 2008, Vol. 6, No. 1, pp. 91-100, ISSN 0354–2025

Tolmač D., Prvulović Adamović S., Lambić M., Radovanović (Petrović) Lj.: Energetska efikasnost konvektivnog sušenja , Savremena poljoprivredna tehnika, 2008, No. 1-2, pp. 19-25, ISSN 0350-2953, UDK: 66.041:536.2

Tolmač D., Prvulović Adamović S., Štrbac N., Radovanović (Petrović) Lj.: Materijalni i energetski bilans proizvodnje biodizela , Savremena poljoprivredna tehnika, 2009, Vol. 35, No. 3, pp. 185-190, ISSN 0350-2953, UDK: 631.372

Tolmač D., Blagojević Z., Prvulović Adamović S., Tolmač J., Radovanović (Petrović) Lj.: Experimental study on drying kinetic and energetic characteristics of convection pneumatic dryer, Facta universitatis - series: Mechanical Engineering, 2010, Vol. 8, No. 1, pp. 89-96, ISSN 0354–2025

Nikolić M., Desnica (Ginin) E., Pekez (Ciglić) J., Radovanović (Petrović) Lj.: Analiza rizika u procesu benčmarkinga, Tehnika, 2011, Vol. 61, No. 6, pp. 1017-1024, ISSN 0040-2176

Palinkaš I., Radovanović (Petrović) Lj., Desnica (Ginin) E., Pekez (Ciglić) J.: Management and evaluation of centre pivotlinear move systems, Traktori i pogonske mašine, 2014, Vol. 19, No. 2, pp. 65-71, ISSN 0354-9496

Bursać Ž., Adamović Ž., Ašonja A., Radovanović (Petrović) Lj.: Monitoring Components Power Plants, Annals of Faculty Engineering Hunedoara - International Journal of Engineering, 2015, Vol. 13, No. 2, pp. 233-236, ISSN 1584-2665

Novaković B., Radovanović (Petrović) Lj., Vidaković D., Đorđević L., Radišić B.: Evaluating Wind Turbine Power Plant Reliability Through Fault Tree Analysis, Applied Engineering Letters, 2023, Vol. 8, No. 4, pp. 175-182, ISSN 2466-4677, UDK: 629.017:621.548

Radišić B., Radovanović (Petrović) Lj., Novaković B., Pekez (Ciglić) J., Prvulović Adamović S., Desnica (Ginin) E.: Application of the FMECA method for identifying failures in wind turbine systems, Vojnotehnički glasnik, 2026, Vol. 71, No. 1, pp. 121-136, ISSN 0042-8469

12 24.00
M52
Rad u nacionalnom časopisu kategorije M52
Rad u nacionalnom časopisu kategorije M52
Tolmač D., Lambić M., Prvulović Adamović S., Radovanović (Petrović) Lj.: Racionalno korišćenje otpadne toplote u kotlovima sa prirodnim gasom , Časopis za procesnu tehniku i energetiku u poljoprivredi PTEP, 2002, Vol. 18, No. 1, pp. 142-145, ISSN 1450-5029, UDK: 620.9-662.99

Tolmač D., Prvulović Adamović S., Radovanović (Petrović) Lj., Bulik D.: Projekta postrojenja za skladištenje i transport plastičnog granulata , Časopis za procesnu tehniku i energetiku u poljoprivredi PTEP, 2002, Vol. 18, No. 1, pp. 31-34, ISSN 1450-5029, UDK: 624.954-036.7

Radovanović (Petrović) Lj., Adamović Ž., Pekez (Ciglić) J.: Plan remonta turbogeneratora u TE-TO Zrenjanin , Energetske tehnologije: naučno-stručni časopis, 2007, Vol. 3, No. 4, pp. 47-49, ISSN 1451-9070, UDK: 620.9 (082)

Radovanović (Petrović) Lj., Desnica (Ginin) E., Adamović Ž.: Utemeljivanje pouzdanosti traktora u fazi projektovanja sa aspekta povećanja bezbednosti , Traktori i pogonske mašine, 2007, Vol. 12, No. 3, pp. 87-94, ISSN 0354-9496

Prvulović Adamović S., Tolmač D., Radovanović (Petrović) Lj.: Reingenering and development of investment projects in grain processing industry , Machines, Technologies, Materials, 2007, pp. 78-81, ISSN 1313-0226

Prvulović Adamović S., Tolmač D., Radovanović (Petrović) Lj.: Analiza uticja amenadžmenta na organizacione promene u preduzeću , Tehnika - Menadžment, 2008, Vol. 6, No. 57, pp. 15-19, ISSN 1450-9911, UDK: 62(062.2)(497.1)

Radovanović (Petrović) Lj., Desnica (Ginin) E., Pekez (Ciglić) J.: Analiza materijala poljoprivrednih mašina sa aspekta povećanja pouzdanosti, Traktori i pogonske mašine, 2008, Vol. 13, No. 3, pp. 92-105, ISSN 0354-9496

Prvulović Adamović S., Tolmač D., Radovanović (Petrović) Lj., Blagojević Z.: Analysis of State in Biodiesel Production in Serbia , Journal of Applied Engineering Science, 2009, No. 7, pp. 61-67, ISSN 1451-4117, UDK: 33

Prvulović Adamović S., Tolmač D., Radovanović (Petrović) Lj.: Management application of innovation idea and proposals in the enterprise , Tehnika - Menadžment, 2009, Vol. 59, No. 1, pp. 13-16, ISSN 1450-9911

Radovanović (Petrović) Lj., Miladinović Ž., Bradonjić D.: Primena sveukupne efektivnosti opreme, MIR: Menadžment, inovacije, razvoj, 2009, Vol. 13, No. 4, pp. 58-62, ISSN 1452-8800, UDK: 61.7

Radovanović (Petrović) Lj., Desnica (Ginin) E., Pekez (Ciglić) J.: Aspekti primene motornih ulja kod poljoprivrednih mašina, Traktori i pogonske mašine, 2010, Vol. 15, No. 2/3, pp. 94-100, ISSN 0354-9496

Nikolić M., Radovanović (Petrović) Lj., Desnica (Ginin) E., Pekez (Ciglić) J.: Primena metode VIKOR za izbor strategije održavanja, Tehnička dijagnostika, 2010, Vol. 9, No. 4, pp. 25-32, ISSN 1451-1975

Radovanović (Petrović) Lj., Palinkaš I., Ašonja A., Desnica (Ginin) E., Pekez (Ciglić) J.: Lubrication of tractor engine as part of preventive maintenance, Traktori i pogonske mašine, 2015, Vol. 20, No. 3-4, pp. 124-129, ISSN 0354-9496

Radovanović (Petrović) Lj., Palinkaš I., Ašonja A., Desnica (Ginin) E., Pekez (Ciglić) J.: Lubrication of tractor engine as part of preventive maintenance, Traktori i pogonske mašine, 2015, Vol. 20, No. 3/4, pp. 124-129, ISSN 0354-9496

Palinkaš I., Pekez (Ciglić) J., Desnica (Ginin) E., Radovanović (Petrović) Lj.: Application of functional generative design in product manufacturing, Machine Design, 2020, Vol. 12, No. 4, pp. 99-102, ISSN 1821-1259

15 22.50
M53
Rad u nacionalnom časopisu kategorije M53
Rad u nacionalnom časopisu kategorije M53
Sajfert Z., Radovanović (Petrović) Lj.: Reinženjering poslovnih procesa (BPR) , DIT Naučno stručno informativni časopis, 2000, pp. 39-46, ISSN 0354-7140, UDK: 658.011

Sajfert Z., Desnica (Ginin) E., Radovanović (Petrović) Lj.: Inovacije, kreativnost i preduzetništvo , DIT Naučno stručno informativni časopis, 2001, Vol. 7, No. 15-16, pp. 93-95, ISSN 0354-7140, UDK: 658.012.123

Tolmač D., Prvulović Adamović S., Radovanović (Petrović) Lj.: Funkcija održavanja na površinskim kopovima uglja , OMO: Održavanje mašina i opreme: časopis za unapredjenje održavanja i organizaciju sredstava za rad, 2001, Vol. 30, No. 1-2, pp. 17-21, ISSN 0350-1647, UDK: 658.58

Adamović Ž., Radovanović (Petrović) Lj., Stanojevic M.: Modeli otkaza hidrauličkih sistema , Tehnička dijagnostika, 2002, Vol. 1, No. 1, pp. 61-68, ISSN 1451-1975

Adamović Ž., Radovanović (Petrović) Lj.: Metode izbora dijagnostičkih parametara , Tehnička dijagnostika, 2003, Vol. 2, No. 2, pp. 26-33, ISSN 1451-1975, UDK: 621.7.01

Adamović Ž., Radovanović (Petrović) Lj.: Osnovni pristup održavanju gasnih kotlova, Tehnička dijagnostika, 2003, Vol. 2, No. 3, pp. 35-39, ISSN 1451-1975, UDK: 621.311.22.094.64

Adamović Ž., Desnica (Ginin) E., Radovanović (Petrović) Lj.: Informativnost osobina i klasifikacija stanja hidrauličkog sistema , Tehnička dijagnostika, 2003, Vol. 2, No. 4, pp. 25-31, ISSN 1451-1975, UDK: 621.22.011

Adamović Ž., Desnica (Ginin) E., Radovanović (Petrović) Lj.: Struktura i sredstva dijagnostike hidrauličkog sistema , Tehnička dijagnostika, 2004, Vol. 3, No. 3-4, pp. 55-61, ISSN 1451-1975, UDK: 62.-82:665.7

Adamović Ž., Desnica (Ginin) E., Radovanović (Petrović) Lj.: Ispitivanja hidrauličkih instalacija , Tehnička dijagnostika, 2004, Vol. 3, No. 1, pp. 8-13, ISSN 1451-1975, UDK: 62-82/-52 ISSN 1451-1975

Adamović Ž., Katić A., Nenadić D., Desnica (Ginin) E., Radovanović (Petrović) Lj.: Primena termovizije u kontroli toplovodnih mreža i industrijskih parnih postrojenja , Energetske tehnologije: naučno-stručni časopis, 2004, Vol. 1, No. 2, pp. 32-35, ISSN 1451-9070, UDK: 620.9(082)

Adamović Ž., Desnica (Ginin) E., Radovanović (Petrović) Lj.: Otkazi elemenata hidraulične instalacije , Tehnička dijagnostika, 2004, Vol. 3, No. 2, pp. 18-24, ISSN 1451-1975, UDK: 62.-522.2

Adamović Ž., Radovanović (Petrović) Lj.: Analiza vibracija u cilju povećanja efikasnosti turbogeneratora, Energetske tehnologije: naučno-stručni časopis, 2004, Vol. 1, No. 1, pp. 36-41, ISSN 1451-9070, UDK: 620.9(082)

Adamović Ž., Radovanović (Petrović) Lj., Desnica (Ginin) E.: Određivanje pouzdanosti hidrauličkih sistema u fazi projektovanja , Hidraulika i pneumatika, 2004, Vol. 1, No. 1, pp. 1-10, ISSN 0350-6312

Adamović Ž., Radovanović (Petrović) Lj., Desnica (Ginin) E.: Planiranje rezervnih delova za remont hidrauličkih sistema , Hidraulika i pneumatika, 2004, Vol. 1, No. 1, pp. 25-31, ISSN 0350-6312

Adamović Ž., Radovanović (Petrović) Lj., Vujkovic S.: Process Monitoring and Proactive Maintenance , Održavanje mašina, 2005, Vol. 5, No. 2, pp. 6-9, ISSN 1452-9688

Katic A., Nenadic D., Desnica (Ginin) E., Radovanović (Petrović) Lj.: Razvoj termovizijskih merenja u industriji , Održavanje mašina, 2005, Vol. 2, No. 5, pp. 24-28, ISSN 1452-9688

Adamović Ž., Desnica (Ginin) E., Radovanović (Petrović) Lj.: Kvantifikovanje uticaja održavanja na pouzdanost i rizik korišćenjem modelovanja po markovu , Energetske tehnologije: naučno-stručni časopis, 2005, Vol. 3, No. 2, pp. 39-42, ISSN 1451-9070, UDK: 620.9(082)

Adamović Ž., Radovanović (Petrović) Lj., Desnica (Ginin) E.: Primena kepstrum analize u tehničkoj dijagnostici , Tehnička dijagnostika, 2005, Vol. 4, No. 3-4, pp. 36-41, ISSN 1451-1975, UDK: 621.24.001.004.16

Adamović Ž., Radovanović (Petrović) Lj., Ambrozi M., Desnica (Ginin) E.: Razvojne etape u procesu dijagnostike turbogeneratora , Tehnička dijagnostika, 2005, Vol. 4, No. 1, pp. 3-9, ISSN 1451-1975, UDK: 621.313.52.08

Prvulović Adamović S., Tolmač D., Radovanović (Petrović) Lj.: Metode provere ispravnosti tehničkih sistema na pk "Kostolac" postupcima tehničke dijagnostike , Tehnička dijagnostika, 2005, Vol. 4, No. 3-4, pp. 54-59, ISSN 1451-1975, UDK: 621.18.620.1:669.15-194

Tolmač D., Prvulović Adamović S., Radovanović (Petrović) Lj., Blagojević Z.: Projektovanje i održavanje glavnih mernoregulacionih stanica za gas , Održavanje mašina, 2005, Vol. 5, No. 2, pp. 41-46, ISSN 1452-9688

Tolmač D., Prvulović Adamović S., Radovanović (Petrović) Lj.: Održavanje i menadžment pouzdanosti sistema , Održavanje mašina, 2006, Vol. 6, No. 3, pp. 14-18, ISSN 1452-9688

Desnica (Ginin) E., Radovanović (Petrović) Lj.: Specijalista za održavanje tehničkih sistema , Održavanje mašina, 2006, Vol. 6, No. 3, pp. 47-53, ISSN 1452-9688

Adamović Ž., Desnica (Ginin) E., Radovanović (Petrović) Lj.: Reliability in manufacture , Održavanje mašina, 2006, Vol. 3, No. 6, pp. 53-58, ISSN 1452-9688

Desnica (Ginin) E., Radovanović (Petrović) Lj.: Intelektualni kapital – neopipljiva imovina , Menadžment znanja: naučno-stručni časopis iz oblasti menadžmenta znanja, 2006, Vol. 1, No. 1, pp. 53-58, ISSN 1452-9661

Adamović Ž., Milosevic G., Radovanović (Petrović) Lj.: Upravljanje znanjem (Knowledge Management), Menadžment znanja: naučno-stručni časopis iz oblasti menadžmenta znanja, 2006, Vol. 1, No. 1, pp. 7-13, ISSN 1452-9661

Adamović Ž., Desnica (Ginin) E., Radovanović (Petrović) Lj.: Uticaj održavanja na pouzdanost i rizik korišćenjem modelovanja po Markovu , Tehnička dijagnostika, 2006, Vol. 5, No. 2, pp. 13-19, ISSN 1451-1975, UDK: 622.391.3.1

Desnica (Ginin) E., Radovanović (Petrović) Lj., Adamović Ž.: Savremene metode u projektovanju i konstruisanju tehničkih sistema sa aspekta održavanja , Održavanje mašina, 2007, Vol. 1, No. 7-8, pp. 45-49, ISSN 1452-9688

Radovanović (Petrović) Lj., Desnica (Ginin) E., Adamović Ž.: Savremene metodologije održavanja , Održavanje mašina, 2007, No. 4, pp. 77-84, ISSN 1452-9688

Kucora I., Radovanović (Petrović) Lj., Desnica (Ginin) E., Pekez (Ciglić) J.: Аpplication of fuzzy function on pyrolysis furnace tubes remaining life assessment, Annals of Faculty Engineering Hunedoara - International Journal of Engineering, 2014, Vol. 12, No. 1, pp. 233-236, ISSN 1584-2665

Kucora I., Radovanović (Petrović) Lj., Palinkaš I., Adamović Ž.: Methodology for Applying the Differential Quadrature (DQ) Method to the Free Vibration Analysis, Annals of Faculty Engineering Hunedoara - International Journal of Engineering, 2015, Vol. 13, No. 2, pp. 157-161, ISSN 1584-2665

Vlahović M., Kavalić (Zakin) M., Radovanović (Petrović) Lj., Bađok D., Lunjić A.: Checking the tires as measure of efficiency increase and reducing working costs of forklifts – Case study of company Mercator-S, Acta Technica Corviniensis, 2017, pp. 17-22, ISSN 2067-3809

Novaković B., Radovanović (Petrović) Lj., Đurđev M., Speight J.: OPTIMIZATION OF MANUFACTURING PROCESSES USING MODER AUTOMATED CNC MILLING MACHINES, Applied Engineering Letters, 2018, Vol. 3, No. 4, pp. 124-128, ISSN 2466-4677, UDK: 621.9:681.5

Vujić (Francuski) B., Pekez (Ciglić) J., Mihajlović V., Radovanović (Petrović) Lj., Marčeta (Tasovac) U., Palinkaš I.: Public perception and awareness on climate changes and the importance of renewable energy sources, Applied Engineering Letters, 2020, Vol. 5, No. 2, pp. 68-74, ISSN 2466-4677, UDK: 502.17:551.583620.91

Novaković B., Radovanović (Petrović) Lj., Vlačić S.: LS, DR and LR regulation on the hydraulic piston pump with variable flow, DIT - Društvo inženjera i tehničara, 2020, Vol. 32, No. 1, pp. 9-15, ISSN 0352-0870

Novaković B., Desnica (Ginin) E., Radovanović (Petrović) Lj., Đorđević L., Ivetić R., Labović Vukić D.: Optimization of industrial fan using system methods laser alignment, Applied Engineering Letters, 2021, Vol. 6, No. 2, pp. 62-68, ISSN 2466-4677

Đorđević L., Novaković B., Pekez (Ciglić) J., Radovanović (Petrović) Lj., Đurđev M.: A BRIEF REVIEW OF THE APPLICATION OF THE SPM METHOD IN ORDER TO IMPROVE PREVENTIVE MAINTENANCE OF BEARINGS, Acta Technica Corviniensis, 2021, Vol. 14, No. 2, pp. 121-124, ISSN 2067-3809

Erić S., Stojanović Ž., Stanisavljev (Zec) S., Radovanović (Petrović) Lj., Prvulović Adamović S.: Интеграција одржавања према стању у железници – проблеми, технике, нова решења, DIT Naučno stručno informativni časopis, 2022, No. 37, pp. 15-31, ISSN 0354-7140

Pekez (Ciglić) J., Desnica (Ginin) E., Radovanović (Petrović) Lj., Dobrilović D., Radosav (Stoin) D., Palinkaš I.: The importance of solar resource usage in internet of things (IoT), Annals of Faculty Engineering Hunedoara - International Journal of Engineering, 2022, Vol. 10, No. 2, pp. 45-48, ISSN 1584-2665

Novaković B., Radovanović (Petrović) Lj., Đurđev M., Đorđević L., Bakator M.: Implementation of FTA Analysis on an Axial-Piston Hydraulic Pump System, DIT Naučno stručno informativni časopis, 2024, pp. 9-14, ISSN 0354-7140

40 40.00
M63
Saopštenje sa skupa nacionalnog značaja štampano u celini
Saopštenje sa skupa nacionalnog značaja štampano u celini
Adamović Ž., Ugrenovic M., Cvetkovic S., Radovanović (Petrović) Lj.: PRIMENA MEHANIČKIH ZAPTIVAČA U ROTACIONOJ OPREMI; XXIV Jugoslovenski majski skup održavalaca, Budva , 24. Majski skup održavalaca, Budva: OMO, 2001

Adamović Ž., Malić D., Radovanović (Petrović) Lj.: TOTALNO ODRŽAVANjE, ISTORIJAT, OSNOVE I PROCES IMPLEMENTACIJE ; XXIV Jugoslovenski majski skup održavalaca, Budva , 24. Majski skup održavalaca, Budva: OMO, 2001

Adamović Ž., Kucora I., Radovanović (Petrović) Lj., Sic D.: MODELI HRAPAVOG KONTAKTA POVRŠINA DELOVA SISTEMA , 16. Majski skup održavalaca Jugoslavije, Niška Banja: OMO, 1 Maj, 2003, pp. 53-59, UDK: 658.58:621(082), 681.5.01(082), 621-7(082)

Adamović Ž., Radovanović (Petrović) Lj., Golubovic D.: MODELI OTKAZA I DIJAGNOSTIKE HIDRAULIČKIH SISTEMA , 16. Majski skup održavalaca Jugoslavije, Niška Banja: OMO, 1 Maj, 2003, pp. 109-119, UDK: 658.58:621(082), 681.5.01(082), 621-7(082)

Kucora I., Radovanović (Petrović) Lj.: VIŠEKRITERIJUMSKA OPTIMIZACIJA KLIZNIH LEŽIŠTA , 16. Majski skup održavalaca Jugoslavije, Niška Banja: OMO, 1 Maj, 2003, pp. 59-65, UDK: 658.58:621(082), 681.5.01(082), 621-7(082)

Radovanović (Petrović) Lj., Sič D., Desnica (Ginin) E.: Alokacija pouzdanosti tehničkih sistema, 16. Majski skup održavalaca Jugoslavije, Niška Banja, 1 Maj, 2003, pp. 31-38

Tolmač D., Prvulović Adamović S., Radovanović (Petrović) Lj., Bulik D.: Razvoj tehnoloških rešenja za rekuperaciju otpadne toplote u kotlovskim postrojenjima , 16. Majski skup održavalaca Jugoslavije, Niška Banja: "OMO", 1 Maj, 2003, pp. 281-286, UDK: 658.58:621(082), 681.5.01(082), 621-7(082)

Tolmač D., Radovanović (Petrović) Lj., Prvulović Adamović S., Bulik D.: RAZVOJ TEHNOLOŠKIH REŠENjA ZA REKUPERACIJU OTPORNE TOPLOTE U KOTLOVSKIM POSTROJENjIMA , 16. Majski skup održavalaca Jugoslavije, Niška Banja, 1 Maj, 2003

Desnica (Ginin) E., Adamović Ž., Radovanović (Petrović) Lj.: Metodologija primene računara pri projektovanju i konstruisanju, 18. Majski skup održavalaca Jugoslavije, Vrnjačka Banja, 1 Maj, 2005

Adamović Ž., Radovanović (Petrović) Lj., Miladinovic Z.: TEHNOLOGIJE OSLANJANJA U AUTOMOBILSKOJ INDUSTRIJI XXX MAJSKI SKUP ODRŽAVALACA SRBIJE , 30. Majski skup održavalaca, Vrnjačka Banja: AKADEMIJA INŽENJERSTVA ODRŽAVANJA, DRUŠTVO ZA TEHNIČKU DIJAGNOSTIKU „TEHDIS“, BEOGRAD, 2007, pp. 197-207, ISBN 86-83701-02-6

Adamović Ž., Radovanović (Petrović) Lj., Miladinović Ž.: TEHNOLOGIJE BEZBEDNOSTI U AUTOMOBILSKOJ INDUSTRIJI , 30. Majski skup održavalaca, Vrnjačka Banja: AKADEMIJA INŽENJERSTVA ODRŽAVANJA, DRUŠTVO ZA TEHNIČKU DIJAGNOSTIKU „TEHDIS“,BEOGRAD, 2007, pp. 654-651, ISBN 86-83701-02-6.

Adamović Ž., Radovanović (Petrović) Lj., Lakic J.: SISTEM ZA HLAĐENJE MOTORA SUS KAO KUMULATIVNI UTICAJ POKRETNIH NA NEPOKRETNE DELOVE MOTORA , 30. Majski skup održavalaca, Vrnjačka Banja: AKADEMIJA INŽENJERSTVA ODRŽAVANJA, DRUŠTVO ZA TEHNIČKU DIJAGNOSTIKU „TEHDIS“, BEOGRAD, 2007, pp. 636-643, ISBN 86-83701-02-6

Tasić I., Radovanović (Petrović) Lj.: UPRAVLJANJE I REGULACIJA PNEUMATSKIH SISTEMA , 12. Naučno stručni skup "Razvoj, korišćenje i održavanje hidrauličnih i pneumatskih komponenti i sistema", Vršac: Akademija inženjerstva održavanja, 16 Novembar, 2007, ISBN 978-86-83701-08-7, UDK: 62(082)(0.034.2)

Adamović Ž., Radovanović (Petrović) Lj., Pekez (Ciglić) J.: Analiza radnog procesa zupčaste pumpe, 1. Naučno stručni skup "Razvoj, korišćenje i održavanje hidrauličnih i pneumatskih komponenti i sistema", Vršac: Akademija inženjerstva održavanja, 16 Novembar, 2007, ISBN 978-86-83701-08-7, UDK: 62(082)(0.034.2)

Radovanović (Petrović) Lj., Desnica (Ginin) E., Adamović Ž.: METODE ODREĐIVANJA STATISTIČKIH KARAKTERISTIKA HIDRAULIČKIH INSTALACIJA , 1. Naučno stručni skup "Razvoj, korišćenje i održavanje hidrauličnih i pneumatskih komponenti i sistema", Vršac: Akademija inženjerstva održavanja, 16 Novembar, 2007, ISBN 978-86-83701-08-7, UDK: 62(082)(0.034.2)

Radovanović (Petrović) Lj.: PROAKTIVNI KONCEPT U FUNKCIJI POVEĆANJA EFEKTIVNOSTI I EFIKASNOSTI ODRŽAVANJA , 31. Majski skup održavalaca Jugoslavije, Vrnjačka Banja: AKADEMIJA INŽENJERSTVA ODRŽAVANJA, DRUŠTVO ZA TEHNIČKU DIJAGNOSTIKU „TEHDIS“, 2008

Kucora I., Radovanović (Petrović) Lj.: PRIMENA WHY – WHY ANALIZE U TPM-U , 31. Majski skup održavalaca Jugoslavije, Vrnjačka Banja: AKADEMIJA INŽENJERSTVA ODRŽAVANJA, DRUŠTVO ZA TEHNIČKU DIJAGNOSTIKU „TEHDIS“, 2008

Kucora I., Radovanović (Petrović) Lj.: PRIMENA P-M ANALIZE U TPM-U , 31. Majski skup održavalaca Jugoslavije, Vrnjačka Banja: AKADEMIJA INŽENJERSTVA ODRŽAVANJA, DRUŠTVO ZA TEHNIČKU DIJAGNOSTIKU „TEHDIS“, 2008

Radovanović (Petrović) Lj., Bradonjić D., Miladinović Ž.: Uloga menadžmenta u procesu sprovođenja tehničke dijagnostike, XXXII majski skup održavalaca sredstava za rad Srbije "Nove informacione tehnologije i dizajn mašina", Vrnjačka Banja, 28. i 29. Maj, 2009, 32. Majski skup održavalaca Jugoslavije, Vrnjačka Banja: Nove informacione tehnologije i dizajn mašina, 27-28 Maj, 2009, ISBN 978 - 86 - 83701- 22

Radovanović (Petrović) Lj., Pekez (Ciglić) J., Đuričić N., Stanisavljev (Zec) S.: Menadžment održavanja energetskih postrojenja, 9. Naučno-stručni skup "Menadžment, inovacije i razvoj", Vrnjačka Banja, 2009, ISBN 978-86-86677-07-5

Prvulović Adamović S., Tolmač D., Radovanović (Petrović) Lj., Vujić (Francuski) B.: Racionalno korišćenje otpadne toplote na sušari sa pneumatskim transportom materijala za sušenje kukuruzne mekinje , 7. InterRegioSci, Novi Sad, 8 Maj, 2014, pp. 1-16

Kucora I., Radovanović (Petrović) Lj., Kavalić (Zakin) M., Otic G.: Stohastički model određivanja oštećenja cevi pirolitičkih peći, 37. Majski skup održavalaca, Vrnjačka Banja: Srpski akademski centar, 30 Maj, 2014, ISBN 978-86-89087-12-3

Novaković B., Radovanović (Petrović) Lj., Pekez (Ciglić) J., Kavalić (Zakin) M.: Application of preventive maintenance on passenger vehicles braking systems, 26. Međunarodni znanstveni stručni skup Organizacija i tehnologija održavanja - OTO, Osijek, 26 Maj, 2017, pp. 177-182, ISBN 978-953-6032-92-1

Novaković B., Radovanović (Petrović) Lj., Đorđević L.: Optimizacija proizvodnje sa aspekta primene na CNC glodalici, 9. Preduzetništvo, inženjerstvo i menadžment, Zrenjanin, 24 Oktobar, 2020, pp. 169-176, ISBN 978-86-84289-90-4

24 24.00
M71
Odbranjena doktorska disertacija
Odbranjena doktorska disertacija
Radovanović (Petrović) Lj.: Metodologije odrzavanja sa aspekta njihove primene u industriji, Zrenjanin, Tehnicki fakultet Mihajlo Pupin, 2012

1 6.00
M72
Odbranjen magistarski rad
Odbranjen magistarski rad
Radovanović (Petrović) Lj.: Efektivni sistemi za praćenje vibracija i planiranje održavanja turbogeneratora , Zrenjanin, Tehnički fakultet “Mihajlo Pupin”, 2003

1 0.00
M84
Poboljšano tehničko rešenje na nacionalnom nivou
Poboljšano tehničko rešenje na nacionalnom nivou
Tolmač D., Prvulović Adamović S., Desnica (Ginin) E., Radovanović (Petrović) Lj., Pekez (Ciglić) J., Tolmač J., Palinkaš I.: Tehnološko tehničko rešenje proizvodne linije za transport i skladištenje kvarcnog peska, cementa i aditiva, 2017

1 3.00
M85
Prototip, nova metoda, softver, standardizovan ili atestiran instrument,
Prototip, nova metoda, softver, standardizovan ili atestiran instrument,
Brtka V., Makitan (Jevtić) V., Radovanović (Petrović) Lj., Brtka (Miok) E., Živković Z.: Предикциони модел за повећање сигурности у термоелектранама Техничко решење, рађено за ТФ „Михајло Пупин“ Зрењанин (корисник решења) – за потребе научних истраживања, у оквиру пројекта „Развој софтверских алата за анализу и побољшање пословних процеса“ ТР 32044, 2020

Dobrilović D., Pekez (Ciglić) J., Desnica (Ginin) E., Palinkaš I., Radovanović (Petrović) Lj., Mihajlović S., Mazalica M., Đorđević L.: Platforma za laboratorijska istraživanja i edukaciju u oblasti merenja solarne radijacije sa orijentacijom na senzorske mreže, 2025

2 0.00

Korisnički servis