Prezime:	Budak
Ime:	Igor
APVNT broj:	122
Organizacija:	Fakultet tehničkih nauka u Novom Sadu

Produkcija - zbirni rezultati
Oznaka	Naziv kriterijuma produkcije	Broj	Poena
		312	761.50
M21	Rad u vodećem međunarodnom časopisu kategorije M21 Rad u vodećem međunarodnom časopisu kategorije M21 Kosec G., Nagode A., Budak I., Antić A., Kosec B.: Failure of the pinion from the drive of a cement mill, Engineering Failure Analysis, 2011, Vol. 18, pp. 450-454, ISSN 1350-6307 Tadić B., Jeremić B., Todorović P., Vukelić Đ., Proso U., Mandić V., Budak I.: Efficient workpiece clamping by indenting cone-shaped elements, International Journal of Precision Engineering and Manufacturing, 2012, Vol. 13, No. 10, pp. 1725-1735, ISSN 2234-7593 Kovačević D., Budak I., Antić A., Nagode A., Kosec B.: FEM Modeling and Analysis in Prevention of the Waterway Dredger’s Crane Serviceability Failure, Engineering Failure Analysis, 2013, Vol. 28, No. 1, pp. 328-339, ISSN 1350-6307 Tadić B., Vukelić Đ., Miljanić D., Bogdanović B., Mačužić I., Budak I., Todorović P.: Model testing of fixture-workpiece interface compliance in dynamic conditions, Journal of Manufacturing Systems, 2014, Vol. 33, No. 1, pp. 76-83, ISSN 0278-6125 Trifković B., Budak I., Todorović A., Vukelić Đ., Lazić V., Puškar T.: Comparative analysis on measuring performances of dental intraoral and extraoral optical 3D digitization systems, Measurement, 2014, Vol. 47, No. 1, pp. 45-53, ISSN 0263-2241 Puškar T., Jevremović D., Williams R., Eggbeer D., Vukelić Đ., Budak I.: A comparative analysis of the corrosive effect of artificial saliva of variable pH on DMLS and cast Co-Cr-Mo dental alloy, Materials, 2014, Vol. 7, No. 9, pp. 6486-6501, ISSN 1996-1944 Ilić Mićunović M., Budak I., Vučinić-Vasić M., Nagode A., Kozmidis-Luburić U., Hodolič J., Puškar T.: Size and shape particle analysis by applying image analysis and laser diffraction – Inhalable dust in a dental laboratory, Measurement, 2015, Vol. 66, No. C, pp. 109-117, ISSN 0263-2241, UDK: 10.1016/j.measurement.2015.01.028 Tadić B., Ranđelović S., Todorović P., Živković J., Kočović V., Budak I., Vukelić Đ.: Using a high-stiffness burnishing tool for increased dimensional and geometrical accuracies of openings, Precision Engineering: Journal of the International Societies for Precision Engineering and Nanotechnology, 2016, Vol. 43, pp. 335-344, ISSN 0141-6359 Budak I., Mirković S., Šokac M., Santoši Ž., Puškar T., Vukelić Đ.: An approach to modelling of personalized bone grafts based on advanced technologies, International Journal of Simulation Modelling, 2016, Vol. 15, No. 4, pp. 637-648, ISSN 1726-4529 Budak I., Kiralj A., Šokac M., Santoši Ž., Eggbeer D., Peel S.: Computer-aided methods for single-stage fibrous dysplasia excision and reconstruction in the zygomatico- orbital complex, Rapid Prototyping Journal, 2019, ISSN 1355-2546 Santoši Ž., Budak I., Stojaković V., Šokac M., Vukelić Đ.: Evaluation of synthetically generated patterns for image-based 3D reconstruction of texture-less objects, Measurement, 2019, Vol. 147, ISSN 0263-2241 Ilić Mićunović M., Budak I., Vukelić Đ., Đurović Koprivica D., Kuzmanović M., Agarski B., Puškar T.: Investigation of the geometric characteristics of inhalable particles emitted from the process of grinding dental restorations, Article Number: 5169, Applied Sciences, 2024, Vol. 14, No. 12, ISSN 2076-3417 Šokac M., Milošević A., Santoši Ž., Vukelić Đ., Budak I.: Design and Verification of a New Fixture for Machining of Porous Blocks for Medical CAD/CAM Systems, Article Number: 794, Applied Sciences, 2025, Vol. 15, No. 2, ISSN 2076-3417	13	104.00
M21a	Rad u vodećem međunarodnom časopisu kategorije M21a Rad u vodećem međunarodnom časopisu kategorije M21a Budak I., Vukelić Đ., Bračun D., Hodolič J., Soković M.: Pre-Processing of Point-Data from Contact and Optical 3D Digitization Sensors, Sensors, 2012, Vol. 12, No. 1, pp. 1100-1126, ISSN 1424-8220 Todorović P., Vukelić Đ., Tadić B., Veljković D., Budak I., Mačužić I., Lalić B.: Modelling of dynamic compliance of fixture/workpiece interface, International Journal of Simulation Modelling, 2014, Vol. 13, No. 1, pp. 54-65, ISSN 1726-4529 Tadić B., Todorović P., Novkinić B., Buchmeister B., Radenković M., Budak I., Vukelić Đ.: Fixture layout design based on a single-surface clamping with local deformation, International Journal of Simulation Modelling, 2015, Vol. 14, No. 3, pp. 379-391, ISSN 1726-4529 Agarski B., Budak I., Vukelić Đ., Hodolič J.: Fuzzy multi-criteria-based impact category weighting in life cycle assessment, Journal of Cleaner Production, 2016, Vol. 112, pp. 3256-3266, ISSN 0959-6526 Maoduš N., Agarski B., Kočetov Mišulić T., Budak I., Radeka M.: Life cycle and energy performance assessment of three wall types in South-Eastern Europe region, Energy and Buildings, 2016, Vol. 113, pp. 605-614, ISSN 0378-7788 Agarski B., Nikolić V., Kamberović Ž., Anđić Z., Kosec B., Budak I.: Comparative life cycle assessment of Ni-based catalyst synthesis processes, Journal of Cleaner Production, 2017, Vol. 162, pp. 7-15, ISSN 0959-6526 Milanović B., Agarski B., Vukelić Đ., Budak I., Kiš (Kiss) F.: Comparative exergy-based life cycle assessment of conventional and hybrid base transmitter stations, Journal of Cleaner Production, 2017, Vol. 167, pp. 610-618, ISSN 0959-6526 Vukelić Đ., Bošković N., Agarski B., Radonić (Jakšić) J., Budak I., Pap S., Turk Sekulić M.: Eco-design of a low-cost adsorbent produced from waste cherry kernels, Journal of Cleaner Production, 2018, Vol. 174, pp. 1620-1628, ISSN 0959-6526 Agarski B., Vukelić Đ., Ilić Mićunović M., Budak I.: Evaluation of the environmental impact of plastic cap production, packaging, and disposal, Journal of Environmental Management, 2019, Vol. 245, pp. 55-65, ISSN 0301-4797 Šokac M., Budak I., Katić M., Jakovljević Ž., Santoši Ž., Vukelić Đ.: Improved surface extraction of multi-material components for single-source industrial X-ray computed tomography, Measurement, 2020, Vol. 153, ISSN 0263-2241 Šokac M., Budak I., Puškar T., Mirković S., Santoši Ž., Kuzmanović M., Vukelić Đ.: Investigation of radiation level and assessment of dimensional accuracy of acquired CBCT images, Measurement, 2020, Vol. 155, ISSN 0263-2241 Vukelić Đ., Šimunović K., Šimunović G., Šarić T., Kanović Ž., Budak I., Agarski B.: Evaluation of an environment-friendly turning process of Inconel 601 in dry conditions, Journal of Cleaner Production, 2020, Vol. 266, ISSN 0959-6526 Đurović Koprivica D., Puškar T., Budak I., Šokac M., Jeremić-Knežević M., Maletin (Anđelković) A., Milekić (rođ. Jefić) B., Vukelić Đ.: Influence of implant impression methods, polymer materials, and implant angulation on the accuracy of dental models, Polymers, 2022, Vol. 14, No. 14, ISSN 2073-4360 Agarski B., Budak I., Ilić Mićunović M., Vukelić Đ.: Life cycle assessment of injection moulding tools and multicomponent plastic cap production, Article Number: 137450, Journal of Cleaner Production, 2023, Vol. 413, ISSN 0959-6526	14	168.00
M22	Rad u međunarodnom časopisu kategorije M22 Rad u međunarodnom časopisu kategorije M22 Budak I., Hodolič J., Soković M.: Development of a programme system for data-point pre-processing in Reverse Engineering, Journal of Materials Processing Technology, 2005, Vol. 162, pp. 730-735, ISSN 0924-0136 Budak I., Soković M., Barišić B.: Accuracy improvement of point data reduction with sampling-based methods by Fuzzy logic-based decision-making, Measurement, 2011, Vol. 44, No. 6, pp. 1188-1200, ISSN 0263-2241 Ostojić G., Tadić B., Lužanin O., Stankovski S., Vukelić Đ., Budak I., Miladinović Lj.: An integral system for automated cutting tool selection, Scientific Research and Essays, 2011, Vol. 6, No. 15, pp. 3240-3251, ISSN 1992-2248 Trifković B., Budak I., Todorović A., Hodolič J., Puškar T., Jevremović D., Vukelić Đ.: Application of Replica Technique and SEM in Accuracy Measurement of Ceramic Crowns, Measurement Science Review, 2012, Vol. 12, No. 3, pp. 90-97, ISSN 1335-8871 Kovačević D., Soković M., Budak I., Antić A., Kosec B.: Optimal finite elements method (FEM) model for the jib structure of a waterway dredger, Metalurgija, 2012, Vol. 51, No. 1, pp. 113-116, ISSN 0543-5846 Kosec B., Karpe B., Nagode A., Budak I., Ličen M., Đorđević M., Kosec G.: Efficiency and quality of inductive heating and quenching of planetary shafts, Metalurgija, 2012, Vol. 51, No. 1, pp. 71-74, ISSN 0543-5846 Jevremović D., Puškar T., Kosec B., Vukelić Đ., Budak I., Aleksandrović S., Eggbeer D., Williams R.: The analysis of the mechanical properties of F75 Co-Cr alloy for use in selective laser melting (SLM) manufacturing of removable partial denture (RPD)., Metalurgija, 2012, Vol. 51, No. 2, pp. 171-174, ISSN 0543-5846 Jevremović D., Puškar T., Kosec B., Vukelić Đ., Budak I., Aleksandrović S., Eggbeer D., Williams R.: The analysis of the mechanical properties of F75 Co-Cr alloy for use in selective laser melting (SLM) manufacturing of removable partial dentures (RPD), Metalurgija, 2012, Vol. 51, No. 2, pp. 171-174, ISSN 0543-5846 Jevremović D., Puškar T., Budak I., Vukelić Đ., Kojić V., Eggbeer D., Williams R.: An RE/RM approach to the design and manufacture of removable partial dentures with a biocompatibility analysis of the F75 Co-Cr SLM alloy, Materiali in Tehnologije, 2012, Vol. 46, No. 2, pp. 123-129, ISSN 1580-2949 Vukelić Đ., Tadić B., Miljanić D., Budak I., Todorović P., Ranđelović S., Jeremić B.: Novel workpiece clamping method for increased machining performance, Tehnički vjesnik - Technical Gazette, 2012, Vol. 19, No. 4, pp. 837-846, ISSN 1330-3651 Agarski B., Kljajin M., Budak I., Tadić B., Vukelić Đ., Bosak M., Hodolič J.: Application of multi-criteria assessment in evaluation of motor vehicles’ environmental performances, Tehnički vjesnik - Technical Gazette, 2012, Vol. 19, No. 2, pp. 221-226, ISSN 1330-3651 Budak I., Trifkovic B., Puškar T., Vukelić Đ., Vučaj-Ćirilović V., Hodolič J., Todorović A.: Comparative analysis of 3D digitization systems in the field of dental prosthetics, Tehnički vjesnik - Technical Gazette, 2013, Vol. 20, No. 2, pp. 291-296, ISSN 1330-3651 Vukelić Đ., Miljanić D., Ranđelović S., Budak I., Džunić D., Erić M., Pantić M.: Burnishing process based on optimal depth of workpiece penetration, Materiali in Tehnologije, 2013, Vol. 47, No. 1, pp. 43-51, ISSN 1580-2949 Tadić B., Bogdanović B., Jeremić B., Todorović P., Lužanin O., Budak I., Vukelić Đ.: Locating and clamping of complex geometry workpieces with skewed holes in multiple-constraint conditions, Assembly Automation, 2013, Vol. 33, No. 4, pp. 386-400, ISSN 0144-5154 Ilić Mićunović M., Budak I., Kosec B., Nagode A., Hodolič J.: The analysis of particles emission during the process of grinding of steel EN 90MnV8, Metalurgija, 2014, Vol. 53, No. 2, pp. 189-192, ISSN 0543-5846, UDK: 621.92:669.1:504.5=111 Vještica S., Budak I., Kljajin M., Vukelić Đ., Milanović B., Milanković D., Hodolič J.: Model for analysis of environmental impacts of production processes in flooring industry based on LCA, Tehnički vjesnik - Technical Gazette, 2014, Vol. 21, No. 3, pp. 457-466, ISSN 1330-3651 Puškar T., Jevremović A., Aranđelović S., Radulović S., Budak I., Vukelić Đ., Jevremović D.: Comparative study of cytotoxicity of direct metal laser sintered and cast Co-Cr-Mo dental alloy, Metalurgija, 2015, Vol. 54, No. 3, pp. 481-484, ISSN 0543-5846 Santoši Ž., Šokac M., Korolija-Crkvenjakov D., Kosec B., Soković M., Budak I.: Reconstruction of 3D models of cast sculptures using close range photogrammetry, Metalurgija, 2015, Vol. 54, No. 4, pp. 695-698, ISSN 0543-5846, UDK: 669.35.6:739.5.? i2.7:620.18=111 Budak I.: Development of banded microstructure in 34CrNiMo6 steel, Metalurgija, 2016, Vol. 55, No. 3, pp. 329-332, ISSN 0543-5846 Trifković B., Budak I., Vukelić Đ., Puškar T., Jevremović D., Todorović A., Todorović A., Poštić S.: Analysis of accuracy and precision of optical 3D digitisation devices in dental computer-aided-design and computer-aided- manufacturing systems, Maejo International Journal of Science and Technology, 2017, Vol. 11, No. 1, pp. 45-57, ISSN 1905-7873 Vukelić Đ., Budak I., Tadić B., Šimunović G., Kljajić V., Agarski B.: Multi-Criteria Decision-Making and Life Cycle Assessment Model for Optimal Product Selection: Case Study of Knee Support, International Journal of Environmental Science and Technology, 2017, Vol. 14, No. 2, pp. 353-364, ISSN 1735-1472 Ubavin D., Agarski B., Maoduš N., Stanisavljević N., Budak I.: A Model for Prioritising Landfills for Remediation and Closure: A Case Study in Serbia, Integrated Environmental Assessment and Management, 2018, Vol. 1, No. 14, pp. 105-119, ISSN 1551-3793 Vukelić Đ., Agarski B., Budak I., Šimunović G., Buchmeister B., Jakovljević Ž., Tadić B.: Eco-design of fixtures based on life cycle and cost assessment, International Journal of Simulation Modelling, 2019, Vol. 18, No. 1, pp. 72-85, ISSN 1726-4529 Agarski B., Hadžistević M., Budak I., Morača S., Vukelić Đ.: Comparison of approaches to weighting of multiple criteria for selecting equipment to optimise performance and safety, International Journal of Occupational Safety and Ergonomics, 2019, Vol. 25, No. 2, pp. 228-240, ISSN 1080-3548 Santoši Ž., Budak I., Šokac M., Hadžistević M., Vukelić Đ.: Influence of high dynamic range images on the accuracy of the photogrammetric 3D digitization: A case study, Advances in Production Engineering and Management, 2019, Vol. 14, No. 3, pp. 391-399, ISSN 1854-6250 Šokac M., Vukelić Đ., Jakovljević Ž., Santoši Ž., Hadžistević M., Budak I.: Fuzzy Hybrid Method for Reconstruction of 3D Models Based on CT/MRI Data, Strojniski vestnik - Journal of Mechanical Engineering, 2019, Vol. 65, No. 9, pp. 482-494, ISSN 0039-2480 Agarski B., Šokac M., Santoši Ž., Vukelić Đ., Budak I.: Multi-Criteria Evaluation of Design Complexity for Patient-Specific Bone Graft, Tehnički vjesnik - Technical Gazette, 2020, Vol. 27, No. 3, pp. 803-811, ISSN 1330-3651 Vukelić Đ., Todorović P., Šimunović K., Miljojković J., Šimunović G., Budak I., Tadić B.: A Novel Method for Determination of Kinetic Friction Coefficient using Inclined Plane, Tehnički vjesnik - Technical Gazette, 2021, Vol. 28, No. 2, pp. 447-455, ISSN 1330-3651 Vukelić Đ., Kanović Ž., Šokac M., Santoši Ž., Budak I., Tadić B.: Modelling of micro-turning process based on constant cutting force, International Journal of Simulation Modelling, 2021, Vol. 20, No. 1, pp. 146-157, ISSN 1726-4529 Vasiljević I., Obradović R., Đurić I., Popkonstantinović B., Budak I., Kulić L., Milojević Z.: Copyright Protection of 3D Digitized Artistic Sculptures by Adding Unique Local Inconspicuous Errors by Sculptors, Applied Sciences, 2021, Vol. 11, No. 16, ISSN 2076-3417 Santoši Ž., Budak I., Šokac M., Kuzmanović M., Vukelić Đ.: An innovative photogrammetric system for 3D digitization of dental models, Tehnički vjesnik - Technical Gazette, 2022, Vol. 29, No. 5, pp. 1560-1566, ISSN 1330-3651 Vukelić Đ., Prica M., Ivanov V., Jovičić G., Budak I., Lužanin O.: Optimization of surface roughness based on turning parameters and insert geometry, International Journal of Simulation Modelling, 2022, Vol. 21, No. 3, pp. 417-428, ISSN 1726-4529 Vasiljević I., Santoši Ž., Obradović M., Popkonstantinović B., Budak I., Obradović R.: Copyright Protection of 3D Digitized Sculptures by Use of Haptic Device for Adding Local-Imperceptible Bumps, Tehnički vjesnik - Technical Gazette, 2023, Vol. 30, No. 6, pp. 2001-2008, ISSN 1330-3651, UDK: 62(05)=163.42=111 Ćojbašić (Radović) S., Turk Sekulić M., Agarski B., Pap S., Vukelić Đ., Budak I., Prodanović J.: Life cycle assessment of new bio-based coagulant production for sustainable wastewater treatment, International Journal of Environmental Science and Technology, 2023, Vol. 20, pp. 7433-7462, ISSN 1735-1472	34	170.00
M23	Rad u međunarodnom časopisu kategorije M23 Rad u međunarodnom časopisu kategorije M23 Budak I., Soković M., Kopač J., Hodolič J.: Point Data Pre-Processing Based on Fuzzy Logic for Reverse Engineering Modelling, Strojniski vestnik - Journal of Mechanical Engineering, 2009, Vol. 55, No. 12, pp. 755-765, ISSN 0039-2480 Kovačević D., Budak I., Antić A., Kosec B.: Special finite elements: Theoretical background and application, Tehnički vjesnik - Technical Gazette, 2011, Vol. 18, No. 4, pp. 649-655, ISSN 1330-3651 Sadilek M., Čep R., Budak I., Soković M.: Aspects of using tool axis inclination angle, Strojniski vestnik - Journal of Mechanical Engineering, 2011, Vol. 57, No. 9, pp. 681-688, ISSN 0039-2480 Vukelić Đ., Tadić B., Lužanin O., Budak I., Križan P., Hodolič J.: A rule-based system for fixture design, Scientific Research and Essays, 2011, Vol. 6, No. 27, pp. 5787-5802, ISSN 1992-2248 Agarski B., Budak I., Kosec B., Hodolič J.: An Approach to Multi-criteria Environmental Evaluation with Multiple Weight Assignment, Environmental Modeling and Assessment, 2012, Vol. 17, No. 3, pp. 255-266, ISSN 1420-2026 Mirković S., Budak I., Puškar T., Tadić A., Šokac M., Santoši Ž., Đurđević Mirković T.: Application of modern Computer-Aided Technologies in the production of individual bone graft: A case report, Vojnosanitetski pregled, 2015, Vol. 72, No. 12, pp. 1126-1131, ISSN 0042-8450 Nikolić V., Agarski B., Kamberović Ž., Anđić Z., Budak I., Kosec B.: Multi-Criteria Analysis of Ni-Based Catalysts Synthesis Methods, Materiali in Tehnologije, 2016, Vol. 50, No. 4, pp. 553-558, ISSN 1580-2949 Stepanov J., Ubavin D., Prokić D., Budak I., Stevanović Čarapina H., Stanisavljević N.: Comparison Of Municipal Waste Management Systems Using LCA: South Backa Waste Management Region – Case Study, Environment Protection Engineering, 2018, Vol. 44, No. 3, pp. 33-49, ISSN 0324-8828, UDK: EPE-00742-2017-03 Molotova Š., Čep R., Zlamal T., Mohyla P., Czan A., Antić A., Budak I., Mircea L.: Evaluation of Residual Stresses after Irregular Interrupted Machining, Tehnički vjesnik - Technical Gazette, 2018, Vol. 25, No. 4, pp. 1009-1013, ISSN 1330-3651 Budak I., Santoši Ž., Stojaković V., Korolija-Crkvenjakov D., Obradović R., Milošević M., Šokac M.: Development of Expert System for the Selection of 3D Digitization Method in Tangible Cultural Heritage, Tehnički vjesnik - Technical Gazette, 2019, Vol. 26, No. 3, pp. 837-844, ISSN 1330-3651 Vlatković Jakovljević I., Todorović A., Budak I., Šokac M., Miličić B., Špadijer Gostović A.: Measurement of dental crown wear - In vitro study, Dental Materials Journal, 2020, Vol. 39, No. 1, pp. 126-134, ISSN 0287-4547	11	33.00
M24	Rad u vodećem nacionalnom časopisu kategorije M24 Rad u vodećem nacionalnom časopisu kategorije M24 Santoši Ž., Budak I., Šokac M., Puškar T., Vukelić Đ., Trifković B.: 3D digitization of featureless dental models using close range photogrammetry aided by noise based patterns, Facta universitatis - series: Mechanical Engineering, 2018, Vol. 16, No. 3, pp. 297-305, ISSN 0354–2025 Santoši Ž., Budak I., Šokac M., Pavletić D.: Bridging the Symmetry-related Gap between Physical and Digital Sculpting by Application of Reverse Engineering Modeling , FME Transactions, 2019, Vol. 47, No. 2, pp. 304-309, ISSN 1451-2092	2	6.00
M31	Plenarno ili uvodno predavanje po pozivu sa međunarodnog skupa štampano u celini (neophodno pozivno pismo i program) Plenarno ili uvodno predavanje po pozivu sa međunarodnog skupa štampano u celini (neophodno pozivno pismo i program) ***Budak I., Soković M., Hodolič J.: Design of a system for intelligent data-point pre-processing in reverse engineering- Nije povezan skup**greska** Budak I., Soković M., Hodolič J., Kopač J.: Point data reduction based on fuzzy logic in reverse engineering, 10. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 9-10 October, 2009, pp. 166-169, ISBN 978-86-7892-223-7 Čep R., Sadilek M., Kouril K., Budak I., Hadžistević M.: Measuring of machine tool accuracy by renishaw ballbar QC10, 10. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 9-10 October, 2009, pp. 109-112, ISBN 978-86-7892-223-7 Crnobrnja B., Budak I., Ilić M., Hodolič J., Kosec B.: Environmental labelling of type i according to SRPS ISO 14024:2003, 10. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 9-10 October, 2009, pp. 242-245, ISBN 978-86-7892-223-7 Hodolič J., Budak I., Vukelić Đ., Agarski B., Hadžistević M.: Less Formal Tools for Environmental Management in Production Industry, 2. International Symposium on Environmental and Material Flow Management - EMFM, Zenica: Faculty of Mechanical Engineering, 7-9 June, 2012, pp. 1-15, ISBN 978-9958-617-46-1 Agarski B., Budak I., Vukelić Đ., Kuric I., Hodolič J.: Weighting of impact categories and sensitivity analysis in life cycle assessment, 15. International Conference: Automation in Production Planning and Manufacturing, Žilina: Faculty of Mechanical Engineering, 19-21 May, 2014, pp. 9-14, ISBN 978-80-5540-878-1 Budak I., Mirković S., Šokac M., Puškar T.: Application of advanced engineering systems in design and fabrication of custom-made bone grafts, 1. International Scientific Conference on Dentistry, Novi Sad: Stylos doo Novi Sad, 17-19 May, 2016, pp. 60-65, ISBN 978-86-7473-59 Agarski B., Vukelić Đ., Kiš (Kiss) F., Ilić Mićunović M., Kosec B., Kosec B., Budak I.: Comparison of Life Cycle Assessment Tools: Simapro and OpenLCA, 6. International Symposium on Environmental and Material Flow Management - EMFM, Bor: University of Belgrade, Technical Faculty in Bor, 2-4 October, 2016, pp. 72-79, ISBN 978-86-6305-050-1 Puškar T., Budak I.: Application of contemporary technologies and computer aided systems in dental prosthetics, 72. International Scientific Conference in Dentistry, Novi Sad: Dentistry Clinic of Vojvodina, 29-30 March, 2019, pp. 8-11, ISBN 978-86-80894-03-4 Šokac M., Eggbeer D., Santoši Ž., Durakbasa N., Budak I.: Overview of 3D digitizing and designing methods used for custom dental medical models, 6. International Scientific Conference in Dentistry, Novi Sad: Dentistry Clinic of Vojvodina, 2-3 April, 2022, pp. 115-121, ISBN 978-86-80894-05-8	10	35.00
M33	Saopštenje sa međunarodnog skupa štampano u celini Saopštenje sa međunarodnog skupa štampano u celini ***Budak I., Erdeljan A., Petrovački D., Hodolič J.: Modelling and Simulation of Heat Exchanger Required for Automatic Control- Nije povezan skup**greska** Antić A., Hodolič J., Gatalo R., Budak I.: A contribution to the development of the system for tool monitoring in flexible tehnological structures FMS , 1. International Conference - TOOLS, Trenčin: STU Bratislava, 12 April, 2000, pp. 162-166 Hodolič J., Budak I., Matin I., Antić A.: Subsystem for simulation of the production of plastic parts in the system of automated process design, 14. DAAAM International Symposium, Sarajevo: DAAAM International, 22-25 October, 2003, pp. 185-186, ISBN 3-901509-34-8 Hodolič J., Budak I., Vojinović-Miloradov M., Šebo D., Badida M.: Application of Unconventional Methods for Treatment of Used Cooling and Lubricating Fluids From Metalworking Industry , 1. PSU-UNS Conference on BioScience: Food, Agriculture and the Environment, Hat-Yai, 11-12 December, 2003, pp. 195-200, ISBN 974-644-540-5 Budak I., Hodolič J., Gatalo R.: Development of the system for data-point preprocessing in reverse engineering , 15. DAAAM International Symposium, Beč, 3-6 November, 2004, pp. 59-60 ***Budak I., Hodolič J., Gatalo R.: Development of the System for Reverse Engineering Based Design of Complex Shapes with Emphasis on data point Preprocessing Naziv skupa: Proceedings of the 11.th International CIRP Life Cycle Engineering seminar “Product Life Cycle- Quality Menagment Issues” - Nije povezan skup**greska** ***Budak I., Hodolič J., Soković M.: Development of a programme system for data-point pre-processing in reverse engineering- Nije povezan skup**greska** Hodolič J., Budak I., Hadžistević M.: 3D-Digitization in Production Engineering , 9. Mechanical Engineering (Strojné inžinierstvo), Bratislava, 16 November, 2005, pp. 766-775, ISBN 80-227-2314-2 Hodolič J., Budak I., Hadžistević M.: Digitization in Production Engineering , 9. Mechanical Engineering (Strojné inžinierstvo), Bratislava, 16 November, 2005, pp. 766-775, ISBN 80-227-2314-2 Hodolič J., Agarski B., Budak I.: The Assessment of Raw Material Input for the Composting Process on the Territory of the City of Novi Sad , 1. The international conference Engineering of Environment Protection - TOP, Bratislava: Slovac University of Technology in Bratislava, Faculty of Mechanical Engineering, Departman of Production Engineering, 5-10 June, 2006, pp. 1-6, ISBN 80-227-2436-X Hodolič J., Bajgo G., Budak I., Paulinkova A.: Measurement and control of microbial contamination of cutting fluids, 13. International Conference "Engineering and Environment Protection", Bratislava: Slovac University of Technology in Bratislava, 26-28 June, 2007, pp. 117-122, ISBN 978-80-227-2693-1 Hodolič J., Bešić I., Budak I.: Standardized interfaces for CAD/CAQ , 12. International Scientific Conference "Mechanical Engineering", Bratislava: The Faculty of Mechanical Engineering, 13-14 November, 2008, ISBN 978-80-227-2987-1 Trifković B., Budak I., Todorović A., Puškar T., Antić A.: The significance of dental CAD/CAM systems in environmental protection and health care, 9. International Conference on Environmental Management, Bratislava, 10-11 December, 2009, pp. 199-204, ISBN 978-80-89281-56-5 Antić A., Budak I., Milošević M., Hadžistević M.: Measurement and estimation of Noise infuence on the Environment, 9. International Conference on Environmental Management, Bratislava, 10-11 December, 2009, pp. 236-241, ISBN 978-80-89281-56-5 Puškar T., Budak I., Trifković B., Jevremović D.: Environmental and health protection in dental laboratories for fixed and mobile dentures, 9. International Conference on Environmental Management, Bratislava, 10-11 December, 2009, pp. 181-186, ISBN 978-80-89281-56-5 Budak I., Kosec B., Hodolič J., Ilić Mićunović M., Crnobrnja B., Sokovič M.: Contribution to the Analysis of Self-Declared Environmental Labels, 9. International Foundrymen Conference “Innovative materials and advanced concepts of metal casting production”, Opatija: University of Zagreb - Faculty of Metallurgy, 18-19 June, 2009, pp. 1-6, ISBN 978-953-7082-08-6 Crnobrnja B., Budak I., Ilić Mićunović M., Hodolič J., Kosec B.: Environmental labelling of type i according to SRPS ISO 14024:2003 , 10. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 9-10 October, 2009, pp. 242-245, ISBN 978-86-7892-223-7 Ilić Mićunović M., Budak I., Crnobrnja B., Hodolič J., Kosec B.: Analysis of self-declared environmental labels and declarations according to standard ISO 14021 , 10. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 9-10 October, 2009, pp. 254-257, ISBN 978-86-7892-223-7 Trifković B., Budak I., Puškar T., Jevremović D., Antić A.: Prosthetic Repair of Endodontically Treated Tooth with All-Ceramic Endocrown – Case Report, 10. International Scientific Conference "New Ways of Manufacturing Technologies", Prešov, 17-19 June, 2010, pp. 455-460, ISBN 978-80-553-0441-0 ***Kovačević D., Antić A., Budak I.: Numerical Modelling of the Jib Structure of a Waterway Bucket Dredger- Nije povezan skup**greska** Vujić G., Pavlović M., Milanović B., Milanković D., Hodolič J., Budak I.: Analysis of motor vehicle recycling in Serbia by the application of LCA, 2. ISWA Beacon Conference, Novi Sad, 8-10 December, 2010, pp. 228-236, ISBN 978-86-7892-305-0 Trifković B., Budak I., Puškar T., Jevremović D.: Accuracy of Cerec® 3D Optical Scanner Systems in Fixed Dental Restoration Manufacturing, 10. International Scientific Conference "New Ways of Manufacturing Technologies", Prešov, 17-19 June, 2010, pp. 295-302, ISBN 978-80-553-0441-0 Čep R., Čepova L., Hatala M., Budak I., Janasek A.: Ceramic Cutting Tool Tests with lnterrupted Cut Simulator, 1. International Conference on Innovative Technologies IN-TECH, Prague, 14-16 September, 2010, pp. 144-148, ISBN 978-80-904502-2-6 Agarski B., Budak I., Hodolič J., Vukelić Đ.: Multicriteria Approach for Assessment of Environment Quality, 4. International Quality Conference, Kragujevac: Faculty of Mecanical Engineering, 21-19 May, 2010, pp. 351-359, ISBN 978-86-86663-49-8 Trifković B., Budak I., Jevremović D., Puškar T., Todorović A.: Influence of the ways for removing the excess of composite resin cement materials on the degree of surcare roughness, 0. International Scientific Conference: "Contemporary Materials 2010", Banja Luka, 2-3 June, 2010, pp. 98-104 Puškar T., Ilić Mićunović M., Budak I., Trifković B., Hodolič J.: Environmental and occupational health risks in dental laboratories, 5. International Quality Conference, Kragujevac: Faculty of Mechanical Engineering, 20 May, 2011, pp. 595-602, ISBN 978-86-86663-68-9 Agarski B., Vukelić Đ., Budak I., Hodolič J., Puškar T.: The hierarchical structure in healthcare waste management, 5. International Quality Conference, Kragujevac: Faculty of Mechanical Engineering, 20 May, 2011, pp. 165-174, ISBN 978-86-86663-68-9 Štrbac B., Hadžistević M., Hodolič J., Budak I.: Inspection Geometric Characteristics of the Products on Coordinate Measuring Machine (CMM), 1. Regional Conference - Mechatronics in Industrial Applications, Kečkemet: Országos Széchényi Könyvtár, 9-11 November, 2011, pp. 43-48, ISBN 978-615-5192-04-3 Vukelić Đ., Tadić B., Hodolič J., Budak I., Lazarević M.: Development an expert system for machining fixture design, 10. International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology - DEMI, Banja Luka: Faculty of Mechanical Engineering, 26-28 May, 2011, pp. 303-308, ISBN 978-99938-39-36-1 Budak I., Trifković B., Puškar T., Hadžistević M., Vukelić Đ., Hodolič J.: Application and accuracy of 3D-digitization systems in the field of dentistry, 6. International Working Conference "Total Quality Management - Advanced and Intelligent Approaches" - TQM & AIA, Beograd: Faculty of Mechanical Engineering, 6-10 June, 2011, pp. 409-414, ISBN 978-86-7083-727-0 Hadžistević M., Hodolič J., Budak I., Vukelić Đ., Štrbac B.: Results of the analysis on stylus calibration of a coordinate measuring machine (CMM), 34. International Conference on Production Engineering, Niš: Faculty of Mechanical Engineering, 28-30 September, 2011, pp. 143-146, ISBN 978-86-6055-019-6 Budak I., Vještica S., Milanović B., Milanković D., Vukelić Đ., Hodolič J., Martinov M.: LCA of an Industrial Plant after the Implementation of Waste-to-Energy, 3. ISWA Beacon Conference, Novi Sad: Faculty of Technical Sciences, 30-2 November, 2011, pp. 136-144, ISBN 978-86-7892-361-6 Antić A., Kovačević D., Kosec B., Budak I.: Influence of Tool Wear Condition on Tool Vibrations, 5. PSU-UNS International Conference on Engineering and Technology - ICET, Phuket: Prince of Songkla University, Faculty of Engineering Hat Yai, 2-3 May, 2011, pp. 759-763 Kovačević D., Budak I., Antić A.: Design Concept of a Waterway Dredger Jib Structure, 5. PSU-UNS International Conference on Engineering and Technology - ICET, Phuket: Prince of Songkla University, Faculty of Engineering Hat Yai, 2-3 May, 2011, pp. 239-243 Kovačević D., Antić A., Budak I.: Practical Aspects of the Special Finite Elements Application, 5. PSU-UNS International Conference on Engineering and Technology - ICET, Phuket: Prince of Songkla University, Faculty of Engineering Hat Yai, 2-3 May, 2011, pp. 244-248 Kosec B., Senčić S., Karpe B., Peterman Poljanšek S., Nagode A., Schwarzova H., Budak I., Hodolič J., Soković M.: Waste Management in Foundries, 2. International Symposium on Environmental and Material Flow Management - EMFM, Zenica: Faculty of Mechanical Engineering in Zenica, University of Zenica, 7-9 June, 2012, pp. 173-178, ISBN 978-9958-617-46-1 Jevremnović D., Jevremović D., Trifković B., Jevremović A., Lapčević A., Puškar T., Budak I., Vukelić Đ., Budak I., Vukelić Đ., Hodolič J.: The Use of CAD/CAM Technology in Design and Manufacture of Thin Laminate Veneers, 11. International Scientific Conference New Ways in Manufacturing Technologies, Prešov: Faculty of Manufacturing Technologies, 21-23 June, 2012, pp. 156-161, ISBN 978-80-553-0908-8 Budak I., Trifković B., Puškar T., Vukelić Đ., Vučaj-Ćirilović V., Hodolič J., Todorović A.: Comparative Analysis of 3D Digitization Systems in the Field of Dental Prosthetics, 4. International Scientific and Expert Conference TEAM, Slavonski Brod: Mechanical Engineering Faculty in Slavonski Brod, Josip Juraj Strossmayer University of Osijek and International TEAM Society, 17-19 October, 2012, pp. 73-76, ISBN 1847-9065 Crnobrnja B., Agarski B., Hodolič J., Budak I.: APPLICATION OF MULTICRITERIA ANALYSIS IN ECO-LABELING, 6. International Quality Conference, Kragujevac: Faculty of Mechanical Engineering, 7-9 June, 2012, pp. 69-78, ISBN 978-86-86663-83-2 Puškar T., Williams R., Eggbeer D., Trifković B., Jevremović A., Jevremović D., Budak I.: Re CAD CAM approach in design and manufacturing of dental ceramic crowns in combination with manual individualization, 11. International Scientific Conference "Advanced Production Technologies" - MMA, Novi Sad, 20-21 September, 2012, pp. 543-546 Trifković B., Budak I., Todorović A., Puškar T., Vukelić Đ., Todorović A., Šćepanović M.: Quality assessment of intraoral optical digitization methods in dentistry, 7. International Working Conference "Total Quality Management - Advanced and Intelligent Approaches" - TQM & AIA, Beograd: Faculty of Mechanical Engineering, 4-7 June, 2013, pp. 189-194, ISBN 978-86-7083-790-4 Agarski B., Milanović B., Milanković D., Ilić Mićunović M., Budak I., Vukelić Đ., Hodolič J.: Application of Analytic Hierarchy Process for Weighting of Impact Categories in Life Cycle Impact Assessment, 7. International Quality Conference, Kragujevac: Faculty of Engineering, 23-25 May, 2013, pp. 181-187, ISBN 978-86-86663-94-8 Kosec B., Budak I., Kosec G., Tanasić Z., Soković M.: LCA method - Useful tool in steel production industry, 10. Metallic and nonmetallic materials, Bugojno: Faculty of metallurgy and materials science, University of Zenica, 24-25 April, 2014, ISBN 978-9958-785-29-0 Ilić Mićunović M., Budak I., Hodolič J., Vukelić Đ., Puškar T.: Indoor air pollution: particulate emission and health effects on dental technicians, 20. Conference Engineering of Environment Protection - TOP2014, Bratislava: Faculty of Mechanical Engineering, 10-12 June, 2014, pp. 179-184, ISBN 978-80-227-4174-3 Šokac M., Santoši Ž., Puškar T., Mirković S., Soković M., Budak I.: Application of Different Segmentation Approaches on CB-CT Images for the Reconstruction of 3D Model of Mandible, 6. International Scientific and Expert Conference TEAM, Kečkemet: Kecskemét College, Faculty of Mechanical Engineering and Automation, 10-11 November, 2014, pp. 405-409, ISBN 978-615-5192-22-7 Spasić A., Vučaj-Ćirilović V., Movrin D., Šokac M., Budak I., Til V.: CT density of the cortical bone of alveolar process of maxilla, 12. International Scientific Conference "Flexible Technologies" - MMA, Andrevlje: Fakultet tehničkih nauka, 25-26 September, 2015, pp. 243-246, ISBN 978-86-7892-722-5 Ilić Mićunović M., Budak I., Kosec B., Agarski B., Vukelić Đ., Hodolič J.: Particles characterization with static image analysis method, 5. International Symposium on Environmental and Material Flow Management - EMFM, Zenica: Faculty of Mechanical Engineering in Zenica, University of Zenica, 5-7 November, 2015, pp. 110-115, ISBN 978-9958-617-46-1 Agarski B., Vukelić Đ., Ilić Mićunović M., Šimunović K., Budak I.: Optimal product selection based on product’s quality and environmental properties, 1. International Conference on Quality of Life, Kragujevac: Faculty of Engineering, 9-10 June, 2016, pp. 89-94, ISBN 978-86-6335-033-5 Šokac M., Margan V., Car Z., Budak I.: Comparative analysis and evaluation of measurement capabilities of contact and non-contact devices , 555. International Conference on Innovative Technologies – In-Tech 2016, Prag: Faculty of Engineering, University of Rijeka, 6-8 September, 2016, pp. 263-266, ISBN 1849-0662 Agarski B., Kiš (Kiss) F., Budak I.: Different approaches for modelling recycling in LCA: Example with aluminium, 7. ISWA World Congress, Novi Sad: Faculty of Technical Sciences, University of Novi Sad, Serbian Solid Waste Association, 19-21 September, 2016, pp. 1618-1626 Santoši Ž., Budak I., Šokac M., Vukelić Đ.: Influence of surface quality on 3D digitization results obtained by close-range photogrammetry, 15. International Conference on Tribology - SERBIATRIB, Kragujevac: University of Kragujevac, Faculty of Engineering , 17-19 May, 2017, pp. 566-570, ISBN 978-86-6335-041-0 Soković M., Janjić G., Budak I., Tanasić Z., Agarski B., Ilić Mićunović M., Kosec G., Kramar D., Kosec B.: Environmental labelling with type I eco labels, 13. International Conference on Accomplishments in Mechanical and Industrial Engineering - DEMI, Banja Luka: Faculty of Mechanical Engineering, University of Banja Luka, 26-27 May, 2017, pp. 797-802, ISBN 978-99938-39-72-9 Agarski B., Budak I., Šimunović G., Kosec B., Hadžistević M., Vukelić Đ.: Development of innovative methodology for ecodesign of products and processes for the region of Vojvodina, 13. International Conference on Accomplishments in Mechanical and Industrial Engineering - DEMI, Banja Luka: Faculty of Mechanical Engineering, University of Banja Luka, 26-27 May, 2017, pp. 821-826, ISBN 978-99938-39-72-9 Šokac M., Santoši Ž., Budak I., Vukelić Đ., Puškar T.: Improvement and development of modern diagnostic method in dentistry using advanced 3D digitizing systems, 8. PSU-UNS International Conference on Engineering and Technology - ICET, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, 8-10 June, 2017, pp. 1-4, ISBN 978-86-7892-933-5 Agarski B., Vukelić Đ., Milošević M., Kosec B., Budak I.: Multi-criteria decision making and life cycle management model for optimal transport selection, 2. International Conference on Quality of Life, Kragujevac: Faculty of Engineering in Kragujevac, 8-10 June, 2017, pp. 139-144, ISBN 978 - 86 - 6335 - 04 Šokac M., Santoši Ž., Budak I., Car Z., Vukelić Đ.: Combination of contact and optical 3D digitizing methods for their application in reverse engineering, 8. International Conference on Innovative Technologies IN-TECH, Ljubljana: Faculty of Mechanical Engineering, 11-13 September, 2017, pp. 65-68, ISBN 0184-9069 Santoši Ž., Šokac M., Puškar T., Budak I.: Comparative Analysis of Full Frame and APS-C Camera Sensors on 3D Digitization Results, 15. IEEE East-West Design & Test Symposium - EWDTS, Novi Sad: The Institute of Electrical and Electronics Engineers, 29-2 September, 2017, pp. 323-327, ISBN 978-1-5386-3298-7 Stojaković V., Budak I., Obradović R., Korolija Crkvenjakov D., Santoši Ž.: Parametric modeling applied to the virtual reconstruction of the damaged sculpture of St John Nepomuk in Petrovaradin, 35. eCAADe - Educational and research in Computer AIded Architectural Design in Europe, Rim: eCAADe and Sapienza University of Rome., 20-22 September, 2017, pp. 389-399, ISBN 978-94-91207-13-6 Katić M., Šokac M., Budak I.: Application of computed tomography on multi-material objects, 17. International Conference on Materials: corrosion, heat treatment, materials testing and tribology - MTECH, Zadar: Hrvatsko društvo za materijale i tribologiju, 4-7 October, 2017, pp. 217-222, ISBN 2584-4334 Šokac M., Budak I., Santoši Ž., Kadvany K., Puškar T., Vukelić Đ.: Emergence of new technologies in the designing and fabrication of patient-specific removable partial dentures (RPDs): A case study, 8. International Conference on Information Society and Technology – ICIST, Kopaonik: Society for Information Systems and Computer Networks, 11-14 March, 2018, pp. 94-99, ISBN 978-86-8552-516-2 Santoši Ž., Budak I., Šokac M.: Reverse engineering modeling as a tool of digital sculpting, 6. International Scientific Conference moNGeometrija, Novi Sad: Serbian Society for Geometry and Graphics (SUGIG) and Faculty of Technical Sciences, University of Novi Sad, 6-9 June, 2018, pp. 359-362, ISBN 978-86-6022-055-6 Santoši Ž., Šokac M., Tadić B., Budak I., Šimunović G., Ilić Mićunović M., Vukelić Đ.: Evaluation of kinetic friction coefficient for wooden specimens, 13. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 28-29 September, 2018, pp. 153-156, ISBN 978-86-6022-094-5 Puškar T., Budak I., Jakimov D., Đurović Koprivica D., Kojić V., Ilić Mićunović M.: Testing biocompatibility of bone substitute by fluorescent microscopy, 13. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences , 28-29 September, 2018, pp. 363-366, ISBN 978-86-6022-094-5 Šokac M., Miljanović D., Santoši Ž., Vukelić Đ., Budak I.: Application of 3D Technologies for Design and Fabrication of Mandibular Implant: A Case Study, 8. Young Biomedical Engineers and Researchers Conference - YBERC, Košice: Faculty of Mechanical Engineering, 3-5 October, 2018, pp. 185-189, ISBN 978-80-8086-271-8 Kosec B., Fir B., Karpe B., Nagode A., Vidic E., Budak I., Agarski B., Dečman I., Bernetič J., Soković M.: Implementation of Life Cycle Assessment Tools Into The Field of Armour Steel Production, 8. International Scientific Conference on Environmental and Material Flow Management - EMFM, Zenica, 14-16 November, 2018, pp. 26-30, ISBN 978-9958-617-46-1 Agarski B., Vukelić Đ., Hadžistević M., Ilić Mićunović M., Budak I.: Attributional Versus Consequentional Life Cycle Assessment Modelling in Metalworking Production System, 8. International Scientific Conference on Environmental and Material Flow Management - EMFM, Zenica: Faculty of Mechanical Engineering in Zenica, University of Zenica, 14-16 November, 2018, pp. 50-55, ISBN 978-9958-617-46-1 Vukelić Đ., Santoši Ž., Šokac M., Budak I., Šarić T., Šimunović G., Tadić B.: Evaluation of the kinetic friction coefficient by using „disc-block“ friction pair of different wooden samples, 16. International Conference on Tribology - SERBIATRIB, Kragujevac: Faculty of Engineering, 15-17 May, 2019, pp. 287-292, ISBN 2620-2832 Santoši Ž., Šokac M., Vukelić Đ., Budak I.: 3D Reconstruction of Patient-Specific Dental Bone Grafts by Application of Reverse Engineering Modeling, 9. International Conference on Information Science and Technology (ICIST), Kopaonik: Society for Information Systems and Computer Networks, 10-13 March, 2019, pp. 192-195 Karpe B., Vodlan M., Kopač I., Budak I., Ilić Mićunović M., Pavlič A., Puškar T., Nagode A., Tanasić Z., Bizjak M., Kosec B.: Measurement of thermal properties of titanium alloys used in dental medicine , 14. Međunarodni naučno-stručni skup o dostignućima elektrotehnike, mašinstva i informatike - DEMI, Banja Luka: Faculty of mechanical engineering, University of Banja Luka, 24-25 May, 2019, pp. 673-678, ISBN 978-99938-39-85-9 Šokac M., Santoši Ž., Vukelić Đ., Katić M., Durakbasa N., Budak I.: Enhancement of Images from Industrial X-Ray Computed Tomography Systems by Hybrid Approach, 19. International Symposium for Production Research - ISPR, Beč, 28-30 August, 2019, pp. 138-146, ISBN 978-3-030-31342-5 Šokac M., Santoši Ž., Vukelić Đ., Katić M., Durakbasa N., Budak I.: Geometric Tolerancing Analysis of Multi-material Components (MMCs) Obtained by Industrial X-Ray Computed Tomography, 20. International Symposium for Production Research - ISPR, Antalya: Springer, 24-27 September, 2020, pp. 607-613, ISBN 978-3-030-62783-6 Vasiljević I., Obradović R., Đurić I., Santoši Ž., Obradović M., Budak I.: Acquisition of photographs for photogrammetric reconstruction of sculpture in different lighting conditions – Photographing in the interior and in the exterior, FME Transactions, 2020, ISSN 1451-2092, 7. Mongeometrija, Beograd, 18-21 September, 2020 Agarski B., Vukelić Đ., Ilić Mićunović M., Budak I.: Evaluation of Impacts on Worker from Fixture Production with Life Cycle Assessment, 18. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Springer, 7-9 October, 2020, pp. 503-509, ISBN 978-3-030-97947-8 Ilić Mićunović M., Novaković T., Agarski B., Čepić Z., Vukelić Đ., Budak I.: Eco-labels as a tool for circular economy and circular packaging, 14. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 23-25 September, 2021, pp. 193-196, ISBN 978-86-6022-364-9 Santoši Ž., Šokac M., Budak I., Vukelić Đ.: Investigation of different circular image acquisition methods in close-range photogrammetry - virtual approach, 14. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 23-25 September, 2021, pp. 87-90, ISBN 978-86-6022-364-9 Šokac M., Katić M., Santoši Ž., Vukelić Đ., Budak I., Durakbasa N.: Investigation of Influence by Different Segmentation Parameters on Surface Accuracy in Industrial X-ray Computed Tomography, 21. International Symposium for Production Research - ISPR, Antalya: Springer, 7-9 October, 2021, pp. 202-209, ISBN 978-3-030-90420-3 Ilić Mićunović M., Novaković M., Budak I., Vukelić Đ., Agarski B.: Analysis of Product’s Design Health Impact Using DALY Method, 1. International Scientific Conference Healthy Urban Environment - HURBE, Sarajevo: University of Sarajevo, Faculty of Architecture , 4-5 October, 2021, pp. 395-403, ISBN 978-9926-490-02-7 Agarski B., Budak I., Ilić Mićunović M., Vukelić Đ.: Analysis of Steel Production Life Cycle Inventory Datasets, 22. International Symposium for Production Research - ISPR, Antalya: Springer, Towards Industry 5.0, Lecture Notes in Mechanical Engineering, 6-8 October, 2022, pp. 609-617, ISBN 978-3-031-24456-8 Puškar N., Puškar M., Šokac M., Santoši Ž., Kuzmanović M., Budak I., Vukelić Đ.: Analysis of surface roughness and static friction coefficient of Co-Cr-Mo alloy for removable partial deture framework, 18. International Conference on Tribology - SERBIATRIB, Kragujevac: Serbian Tribology Society and Faculty of Engineering, 17-19 May, 2023, pp. 668-674, ISBN 978-86-6335-103-5 Milošević A., Šokac M., Agarski B., Ilić Mićunović M., Budak I., Vukelić Đ.: Life Cycle Assessment of Bone Graft Manufacturing, 15. International Quality Conference, Kragujevac: Faculty of Engineering, 21-23 May, 2025, pp. 249-258, ISBN 978-86-6335-121-9	80	80.00
M34	Saopštenje sa međunarodnog skupa štampano u izvodu Saopštenje sa međunarodnog skupa štampano u izvodu Puškar T., Marković D., Budak I., Jeremić-Knežević M., Maletin (Anđelković) A., Trifković B.: Dental impression accuracy analysis-model development, 35. Annual Congress of the European Prosthodontic Association (EPA), Bern: European Prosthodontic Association, 29-1 September, 2011, pp. 106-106 Milanović B., Milanković D., Vještica S., Szita-Tothe K., Hodolič J., Budak I.: Life cycle assessment of wood floor coverings - case study for multilayer laminate parquet's production process, 19. SETAC Europe - LCA Case Study Symposium, Rim: Society of Environmental Toxicology and Chemistry (SETAC), 11-13 November, 2013, pp. 160-161, ISBN 2310-3191 Agarski B., Budak I., Vukelić Đ., Kosec B., Hodolič J.: Integrating subjective weighting into the life cycle impact assessment by the application of multi-criteria analysis, 20. SETAC Europe - LCA Case Study Symposium, Novi Sad: SETAC, 24-26 November, 2014, pp. 68-68, ISBN 2310-3191 Budak I., Klos Z., Szita Toth K., Ticha M., Kosec B., Kozak D., Hodolič J.: CASE LCA Network: The previous and future three years, 20. SETAC Europe - LCA Case Study Symposium, Novi Sad: SETAC, 24-26 November, 2014, pp. 53-53, ISBN 2310-3191 Hodolič J., Kiš (Kiss) F., Martinov M., Radonjanin V., Vujić G., Budak I.: Teaching of engineers in LCA: 15 years of experience at the University of Novi Sad, 20. SETAC Europe - LCA Case Study Symposium, Novi Sad: SETAC Europe., 24-26 November, 2014 Budak I., Szita Toth K.: How the public transport can be green?, 25. SETAC Europe Annual Meeting, Barcelona: SETAC Europe, 3-7 May, 2015, pp. 192-192 Agarski B., Budak I., Vukelić Đ., Hodolič J.: Using external and internal normalization approaches in life cycle impact assessment, 4. Young Environmental Scientists Meeting - YES, Petnica: Society of Environmental Toxicology and Chemistry - SETAC, 14-19 March, 2015, pp. 79-79 Ilić Mićunović M., Lanc Z., Hadžistević M., Budak I.: The role of environmental labels and claims type II in circular economy development: the study of Republic of Serbia, 1. ISWA WORLD CONGRESS 2016, Novi Sad: Faculty of Technical Sciences, 19-21 September, 2016, pp. 1847-1847, ISBN 978-86-7892-837-6 Agarski B., Budak I., Vukelić Đ., Szita Toth K., Hodolič J.: The model for optimal transport selection based on multi-criteria decision making and life cycle assessment, 26. SETAC Europe Annual Meeting, Nant: SETAC Europe, 22-26 May, 2016, pp. 139-139 Agarski B., Budak I., Kosec B., Vukelić Đ.: Circular economy actions: life cycle assessment of plastic packaging waste, 7. ISWA World Congress, Novi Sad: Faculty of Technical Sciences, 19-21 September, 2016, pp. 1626-1626, ISBN 978-86-7892-837-6 Milanović B., Budak I.: Comparative Life Cycle Exergy Assessment of on-grid hybrid and conventional Base Transceiver Stations, 22. SETAC Europe - LCA Case Study Symposium, Montpellier: SETAC, 20-22 September, 2016, pp. 119-119, ISBN 2310-3191 Agarski B., Budak I., Šimunović G., Kosec B., Vukelić Đ.: Evaluation of eco-design alternatives through integrating life cycle impact assessment and multi-criteria decision aiding, 85. Meeting of European Working Group on MCDA, Padova: European Working Group on MCDA, 20-22 April, 2017, pp. 7-7 Đurović Koprivica D., Jeremić-Knežević M., Milekić (rođ. Jefić) B., Pivaš B., Laban J., Budak I., Puškar T.: Technology of accuracy measurement of imprinted surfaces obtained by conventional impression methods in prosthodontics, 1. International Scientific Conference Dentistry Principles of Good Clinical Practice in Restorative and Aestetic Dentistry-Possibilities, Problems and Solutions, Novi Sad, 8-9 June, 2017, pp. 128-128, ISBN 978-86-80894-00-3 Vicko K., Puškar T., Santoši Ž., Budak I., Eggbeer D.: 3D Technology in Monoblock Manufactoring , 1. International Scientific Conference Dentistry Principles of Good Clinical Practice in Restorative and Aestetic Dentistry-Possibilities, Problems and Solutions, Novi Sad: Dental Clinic of Vojvodina, 8-9 June, 2017, pp. 243-243, ISBN 978-86-80894-00-3 Agarski B., Vukelić Đ., Šimunović K., Budak I.: Assessment of environmental loading of urban area by using fuzzy multi-criteria decision making, 5. International Scientific Conference "Marketing Management, Trade, Financial and Social Aspects of Business", Košice: Vydavateľstvo EKONÓM, Bratislava, 18-20 May, 2017, pp. 17-17, ISBN 978-80-225-4384-2 Agarski B., Nikolić V., Kamberović Ž., Anđić Z., Borut K., Budak I.: Exergy Life Cycle Assessment of Ni-based Catalyst Synthesis Processes, 24. International Symposium on Analytical and Environmental Problems (ISAEP), Segedin: University of Szeged, 8-9 October, 2018, pp. 5-5 Puškar T., Budak I., Šokac M., Santoši Ž., Laban Terzija J., Vukelić Đ.: Personalized Bone Grafts Design by Application of Computer Aided Technologies, 1. International Association for Dental Research, London, 2018, pp. 3372-3372 Puškar T., Budak I., Vukelić Đ., Jevremović D., Trifković B.: The corrosive effect of artificial saliva of variable pH on DMLS and cast Co-Cr-Mo dental alloy, 26. International Conference on Dental Treatment, Wien, 2019, pp. 42-42 Agarski B., Ubavin D., Vukelić Đ., Ilić Mićunović M., Budak I.: LCA in Field of Safety at Work: A New Engineering Study Subject, 9. International Conference on Life Cycle Management - LCM, Poznan: Poznan University of Technology, 1-4 September, 2019, pp. 388-388, ISBN 978-83-929466-2-5 Agarski B., Ilić Mićunović M., Vukelić Đ., Budak I.: Analysis of LCA and Eco-design Application in Scientific Publications from Serbia, 9. International Conference on Life Cycle Management - LCM, Poznan: Poznan University of Technology, 1-4 September, 2019, pp. 45-45, ISBN 978-83-929466-2-5 Puškar T., Budak I., Jeremić-Knežević M., Đurović Koprivica D., Maletin (Anđelković) A., Puškar M., Vukelić Đ.: APPLICATION OF MODERN TECHNOLOGIES AND COMPUTER AIDED SYSTEMS IN PROSTEHTIC DENTISTRY, 2. PSU-UNS Joint Conference on Medical Science and Technology, Novi Sad, 11-13 October, 2023, pp. 71-72	21	10.50
M43	Monografska bibliografska publikacija, monografska studija nacionalnog značaja Monografska bibliografska publikacija, monografska studija nacionalnog značaja Hadžistević M., Vukelić Đ., Budak I., Matin I., Stepien K., Adamczak S.: Merenje/modeliranje geometrijskih specifikacija proizvoda, Novi Sad, Fakultet tehničkih nauka, 2009, ISBN 978-86-7892-194-0 Budak I., Hodolič J., Bešić I., Vukelić Đ., Osanna H., Durakbasa N.: Koordinatne merne mašine i CAD inspekcija, Novi Sad, Fakultet tehničkih nauka, 2009, ISBN 978-86-7892-195-7 Budak I., Hodolič J., Hadžistević M., Vukelić Đ., Kosec B., Karpe B.: Označavanje proizvoda o zaštiti životne sredine, Novi Sad, Fakultet tehničkih nauka, 2009, ISBN 978-86-7892-190-2 Hodolič J., Vukelić Đ., Budak I., Bešić I., Muransky J.: Ekodizajn i održivi razvoj u mašinskom inženjerstvu, Novi Sad, Fakultet tehničkih nauka, 2009, ISBN 978-86-7892-182-7 Hodolič J., Hadžistević M., Budak I., Antić A., Sklenarova M., Majernik M., Chovancova J.: Upravljanje zaštitom životne sredine - Eko-menadžment, Novi Sad, Fakultet tehničkih nauka, 2009, str. 1-134, ISBN 978-86-7892-183-4 Doroslovački R., Vilotić D., Katić V., Kovačević I., Šešlija D., Kolaković S., Budak I., Konjović Z.: Doktorske akademske studije na Fakultetu tehničkih nauka u Novom Sadu – nekad i sad, Novi Sad, FTN izdavaštvo, Edicija „Tehničke nauke – monografije“, 2017, ISBN 978-86-6022-009-9 Simeunović N., Bojanić R., Medvecki D., Vrtunski M., Konjović Z., Mocelj T., Nenadović M., Konjović G., Bevanda-Kun A., Vrebalov V., Doroslovački R., Vilotić D., Katić V., Kovačević I., Šešlija D., Kolaković S., Budak I.: Analiza uspešnosti marketinških aktivnosi na Fakultetu tehničkih nauka u Novom Sadu, Novi Sad, FTN izdavaštvo, Edicija tehničke nauke - monografije, 2018, ISBN 978-86-6022-030-3	7	21.00
M51	Rad u vodećem nacionalnom časopisu kategorije M51 Rad u vodećem nacionalnom časopisu kategorije M51 Šokac M., Budak I., Mirković S., Santoši Ž., Movrin D., Puškar T.: The role of advanced 3D technologies and additive manufacturing in designing and manufacturing of customized bone grafts, Journal for Technology of Plasticity, 2017, Vol. 42, No. 2, pp. 33-45, ISSN 0354-3870, UDK: 621.7 Karpe B., Vodlan M., Kopač I., Budak I., Nagode A., Pavlič A., Puškar T., Kosec B.: Thermal Properties of Materials used in Dental Medicine, Advanced Technologies and Materials, 2018, Vol. 43, No. 1, pp. 7-10, ISSN 2620-0325	2	4.00
M52	Rad u nacionalnom časopisu kategorije M52 Rad u nacionalnom časopisu kategorije M52 Vukelić Đ., Budak I., Tadić B., Lužanin O., Hadžistević M., Križan P.: Automated generation of workpiece locating scheme in fixture design, Journal of Applied Engineering Science, 2011, Vol. 9, No. 3, pp. 383-392, ISSN 1451-4117 Williams R., Eggbeer D., Jevremović A., Trifković B., Puškar T., Budak I., Jevremović D.: RE-CAD/CAM approach in design and manufacturing of dental ceramic crowns in combination with manual individualization, Journal of Production Engineering, 2012, Vol. 15, No. 2, pp. 91-94, ISSN 1821-4932 Šokac M., Budak I., Ralević N., Soković M., Santoši Ž.: Accuracy analysis of clustering algorithms for segmentation of industrial CT images, Journal of Production Engineering, 2015, Vol. 18, No. 1, pp. 65-68, ISSN 1821-4932, UDK: 621 Tadić A., Mirković S., Puškar T., Šokac M., Budak I.: Implant planning therapy based on CBCT images of the radiosensitive teeth, Journal of Production Engineering, 2015, Vol. 18, No. 1, pp. 69-72, ISSN 1821-4932, UDK: 621 Puškar S., Šokac M., Milovančev (Ilić) A., Budak I.: Application of multidetector computer tomography in acquisition of coronary arteries, Journal of Production Engineering, 2016, Vol. 19, No. 2, pp. 73-76, ISSN 1821-4932, UDK: 621 Santoši Ž., Šokac M., Ralević N., Budak I., Dramićanin M.: Application of fuzzy logic as a tool for improving the quality of photography by shape from focus/defocus 3D digitization, Journal of Production Engineering, 2016, Vol. 19, No. 2, pp. 61-64, ISSN 1821-4932 Agarski B., Budak I., Ilić Mićunović M., Imamović N., Kosec B., Kljajin M., Vukelić Đ.: Internal normalization in life cycle assessment using the multi-criteria analysis approach, Journal of Production Engineering, 2016, Vol. 19, No. 2, pp. 57-60, ISSN 1821-4932 Šokac M., Budak I., Santoši Ž., Balaž B., Milutinović M.: Redesign of robotic arm by the application of reverse engineering and rapid prototyping technologies, Machine Design, 2017, Vol. 9, No. 3, pp. 93-98, ISSN 1821-1259 Vukelić Đ., Šokac M., Budak I., Šarić T., Matin I., Santoši Ž., Šimunović G.: Fixtures design for thin-walled cylindrical workpieces on the principles of group technology, Journal of Production Engineering, 2019, Vol. 22, No. 1, pp. 25-28, ISSN 1821-4932	9	13.50
M53	Rad u nacionalnom časopisu kategorije M53 Rad u nacionalnom časopisu kategorije M53 Hodolič J., Budak I., Šebo D., Badida M., Antić A.: Invative enviromental methods for treatment of used cooling and lubricatng fluids from metal-working idustry, Acta Mechanica Slovaca, 2002, Vol. 6, No. 2, pp. 37-42, ISSN 1335-2393 Hadžistević M., Hodolič J., Budak I.: Razvoj softvera za određivanje faktora korekcije greške merenja na NUMM , Nacionalni naučno-stručni časopis Menadžment totalnim kvalitetom, 2002, Vol. 31, No. No 2, pp. 388-392 Matin I., Hodolič J., Budak I.: Simulation of casting process in the system of automated product design , International Journal of Simulation Modelling, 2004, pp. 69-79, ISSN 1726-4529 Antić A., Budak I., Zeljković M., Ungureanu N.: The Influence of Tool Wear on the Chip Mechanism and Appearance type in Turning, Scientific Bulletin, Series C, Fascicle: Mechanics, Tribology, Machine Manufacturing Technology, 2009, Vol. 23, pp. 19-26, ISSN 1224-3264 Crnobrnja B., Budak I., Ilić Mićunović M., Hodolič J.: Environmental labelling of products with type I labels, Materials and Geoenvironment, 2009, Vol. 56, No. 3, pp. 346-355, ISSN 1408-7073 Ilić Mićunović M., Budak I., Crnobrnja B., Hodolič J.: Analysis of self-declared enviromentals labels, Materials and Geoenvironment, 2009, Vol. 56, No. 1, pp. 74-87, ISSN 1408-7073 Antić A., Budak I., Zeljković M., Ungureanu N.: The Influence of Tool Wear on the Chip Mechanism and Appearance Tyupe in Turning, Scientific Bulletin, Series C, Fascicle: Mechanics, Tribology, Machine Manufacturing Technology, 2009, Vol. 23, pp. 19-26, ISSN 1224-3264 Budak I., Soković M., Hodolič J., Kopač J.: Point Data Reduction Based on Fuzzy Logicin Reverse Engineering, Journal of Production Engineering, 2010, Vol. 13, No. 1, pp. 53-56, ISSN 1821-4932 Čep R., Sadilek M., Kouril K., Budak I., Hadžistević M.: Testing of Machine Tool Accuracy by the QC10 Ballbar System, Journal of Production Engineering, 2010, Vol. 13, No. 1, pp. 23-26, ISSN 1821-4932 Agarski B., Budak I., Hodolič J., Vukelić Đ.: Multicriteria Approach for Assessment of Environment Quality, International Journal for Quality Research, 2010, Vol. 4, No. 2, pp. 131-137, ISSN 1800-6450 Kosec B., Kosec G., Budak I., Nagode A., Antić A.: Analysis of the failured pinion from the drive of a cement mill, Materials and Geoenvironment, 2010, Vol. 57, No. 3, pp. 415-422, ISSN 1408-7073 Budak I., Kosec B., Sokovic M.: Application of Contemporary Engineering Techniques and Technologies in the Field of Dental Prosthetics, Journal of Achievements in Materials and Manufacturing Engineering, 2012, Vol. 54, No. 2, pp. 233-241, ISSN 1734-8412 Milanković D., Milanović B., Agarski B., Crnobrnja B., Ilić Mićunović M., Kosec B., Budak I.: Life Cycle Assessment of an Intermodal Steel Building Unit in Serbia, Journal of Production Engineering, 2012, Vol. 15, No. 2, pp. 99-102, ISSN 1821-4932 Agarski B., Budak I., Puškar T., Vukelić Đ., Marković D., Hadžistević M., Hodolič J.: Multi-criteria assessment of environmental and occupational safety measures in dental prosthetics laboratories, Journal of Production Engineering, 2012, Vol. 15, No. 1, pp. 53-56, ISSN 1821-4932 Hadžistević M., Štrbac B., Budak I., Vukelić Đ., Hodolič J.: Analysis of the operator influence on the accuracy of the calibration styli results in CMM, Journal of Production Engineering, 2012, Vol. 15, No. 1, pp. 41-44, ISSN 1821-4932 Jevremović D., Trifković B., Lapčević A., Puškar T., Budak I., Vukelić Đ., Hodolič J.: The Use of CAD/CAM Technology in Design and Manufacture of Thin Laminate Veneers, Journal of Manufacturing Engineering, 2012, Vol. 11, No. 3, pp. 54-56, ISSN 1335-7972 Šokac M., Budak I.: Analiza uticaja parametara conebeam kompjuterizovane tomografije na rezultate 3D digitalizacije, Zbornik radova Fakulteta tehničkih nauka, 2013, Vol. 28, No. 11, pp. 1977-1980, ISSN 0350-428X Santoši Ž., Budak I.: Analiza karakteristika stereovizijske fotogrametrije kod 3D digitalizacije, Zbornik radova Fakulteta tehničkih nauka, 2013, Vol. 28, No. 11, pp. 1985-1988, ISSN 0350-428X Korolija-Crkvenjakov D., Santoši Ž., Budak I., Sladoje N., Stojaković V.: 3D Digitization as a Tool in the Conservation and Recreation of Cultural Heritage - a Case Study of The Iconostasis of a Destroyed Serbian Orthodox Church in Buda, Review of the National Center for Digitization, 2016, No. 28, pp. 23-31, ISSN 1820-0109 Šokac M., Budak I., Miljanović D., Santoši Ž., Vukelić Đ.: Computer-aided modeling and additive manufacturing fabrication of patient-specific mandibular implant, Clinician and Technology, 2018, Vol. 48, No. 4, pp. 113-117, ISSN 0301-5491 Agarski B., Vukelić Đ., Hadžistević M., Ilić Mićunović M., Budak I.: Attributional versus consequentional life cycle assessment modelling in metalworking production system , Mašinstvo, 2019, Vol. 16, No. 1-2, pp. 37-42, ISSN 1512-5173 Kuzmanović M., Ilić Mićunović M., Budak I., Puškar T., Vukelić Đ., Đurović Koprivica D.: Sampling of micro and nano particles from aerosols generated during dental interventions, Journal of Production Engineering, 2022, Vol. 25, No. 2, pp. 35-38, ISSN 1821-4932	22	22.00
M61	Plenarno ili uvodno predavanje po pozivu sa skupa nacionalnog značaja štampano u celini Plenarno ili uvodno predavanje po pozivu sa skupa nacionalnog značaja štampano u celini Hodolič J., Plančak M., Vilotić D., Hadžistević M., Budak I., Vukelić Đ.: Primena savremenih tehnologija i računarom podržanih sistema za modelovanje i izradu dentalnih nadoknada, 38. JUPITER konferencija, Beograd: Mašinski fakultet, 15-16 Maj, 2012, pp. 35-48, ISBN 978-86-7083-757-7 Petrović P., Hodolič J., Vićentić A., Pilipović M., Jakovljević Ž., Danilov I., Lukić N., Baltić P., Vukelić Đ., Budak I., Hadžistević M., Miković V.: Inteligentni robotski sistemi za ekstremno diverzifikovanu proizvodnju, 38. JUPITER konferencija, Beograd: Mašinski fakultet, 15-16 Maj, 2012, pp. 49-66, ISBN 978-86-7083-757-7 Agarski B., Budak I., Vukelić Đ., Ilić Mićunović M., Kosec B.: Odmeravanje kod ocenjivanja uticaja životnog ciklusa , 7. Memorijalni naučni skup iz zaštite životne sredine "Docent dr Milena Dalmacija", Novi Sad: Prirodno Matematički Fakultet, Univerzitet u Novom Sadu, 1-2 April, 2019, pp. 128-134, ISBN 978-86-7031-510-5	3	4.50
M63	Saopštenje sa skupa nacionalnog značaja štampano u celini Saopštenje sa skupa nacionalnog značaja štampano u celini Podunavac-Kuzmanović S., Budak I., Bašić Đ., Hodolič J.: Formaldehid i benzo(a)piren kao ekološki opasne materije u shp sredstvima , 7. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad, 8 Jun, 2000, pp. 183-184 ***Hodolič J., Budak I.: Prilazi označavanju proizvoda sa aspekta zaštite životne sredine Naziv skupa: Festival kvaliteta 2004 - Nije povezan skup**greska** Antić A., Hodolič J., Gatalo R., Budak I.: Prilog analizi i razvoju sistema za nadzor alata u automatskim fleksibilnim tehnološkim strukturama FTs , 26. JUPITER konferencija, Beograd, 1 Februar, 2000, pp. 3-3 Budak I., Hodolič J., Milikić D., Antić A.: Prilog analizi ekoloških i zdravstvenih aspekata sredstava za hlađenje i podmazivanje pri obradi rezanjem, 7. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Fakultet tehničkih nauka, 8 Jun, 2000, pp. 177-178 Hodolič J., Budak I., Đurić A., Šebo D.: Jedan prilaz modeliranju sistema za tretiranje istrošenih sredstava za hlađenje i podmazivanje u metaloprerađivačkoj industriji , 5. Međunarodno savetovanje o dostignućima elektro i mašinske industrije - DEMI, Banja Luka: Mašinski fakultet, 25-26 April, 2002, pp. 237-242, ISBN 99938-623-2-0 Vukelić Đ., Budak I., Hodolič J.: Razvoj CAD modula u jednom CAD/CAPP/CAM programskom sistemu, 6. Međunarodni naučno-stručni skup o dostignućima elektrotehnike, mašinstva i informatike - DEMI, Banja Luka: Mašinski fakultet, 30-31 Maj, 2003, pp. 237-246, ISBN 99938-623-8-X Budak I., Hodolič J., Matin I., Antić A.: Primena Pro/e modula kod projektovanja proizvoda od plastike , 8. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Fakultet tehničkih nauka, 26 Jun, 2003, pp. 79-80 Budak I., Matin I., Vukelić Đ., Hodolič J.: Jedan prilaz automatizaciji postupaka modeliranja grupe proizvoda primenom programskog sistema Pro/ENGINEER, 29. JUPITER konferencija, Beograd: Mašinski fakultet, 1-2 Februar, 2003, pp. 13-16, ISBN 86-7083-459-6 Budak I., Hodolič J., Soković M.: Programsko rešenje za pre-pocesiranje rezultata 3D-digitalizacije u reverzibilnom inženjerstvu , 7. Međunarodni naučno-stručni skup o dostignućima elektro i mašinske industrije - DEMI, Banja Luka: Mašinski fakultet, 27-28 Maj, 2005, pp. 95-100, ISBN 999328-39-08-6 Vukelić Đ., Todić V., Budak I., Hodolič J.: Baza podataka i baza znanja za pribore u specijalizovanom CAD/CAPP/CAM programskom sistemu, 30. Savetovanje proizvodnog mašinstva Srbije i Crne Gore sa međunarodnim učešćem, Čačak: Tehnički fakultet, 1-3 Septembar, 2005, pp. 135-138, ISBN 86-7776-009-1 Agarski B., Hodolič J., Budak I.: Predlog za kompostiranje baštenskog otpada u Novom Sadu , 33. Nacionalna konferencija o kvalitetu "Festival kvaliteta", Kragujevac: Mašinsku fakultet, Centar za kvalitet, Asocijacija za kvalitet i standardizaciju Srbije, 10-12 Maj, 2006, ISBN 86-80581-86-0 Budak I., Hodolič J., Antić A., Hadžistević M., Vukelić Đ.: Razvoj modela za projektovanje i izradu proizvoda na principima reverzibilnog inženjerstva, 9. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Fakultet tehničkih nauka, 15-16 Jun, 2006, pp. 85-86, ISBN 86-85211-96-4 ***Plavšić Ž., Budak I., Hodolič J.: Primena programskog sistema ProENGINEER u CAD inspekciji proizvoda sa složenom geometrijom Naziv skupa: VI Naučno/stručni simpozij sa međunarodnim učešćem "Metalni i nemetalni anorganski materijali" proizvodnja - osobine - primena - Nije povezan skup**greska** ***Bajgo G., Hodolič J., Budak I.: Merenje i kontrola mikrobne kontaminacije sredstava za hlađenje i podmazivanje Naziv skupa: Techno educa 2007 - Nije povezan skup**greska** ***Čižek M., Hodolič J., Budak I.: Problematika upravljanja otpadnim uljima Naziv skupa: Techno educa 2007 - Nije povezan skup**greska** Koldžin D., Hodolič J., Arsovski S., Vojinović-Miloradov M., Vukelić Đ., Budak I., Mehandžić D.: Unapređenje i razvoj pristupa zaštiti životne sredine u Republici Srbiji, 35. Nacionalna konferencija o kvalitetu, Kragujevac: Mašinski fakultet, 13-15 Maj, 2008, pp. 1-4, ISBN 978-85-86663-25-2 Hodolič J., Hadžistević M., Matin I., Vukelić Đ., Budak I., Bešić I., Adamczak S.: Projekat „ETIQUM“ - osnova za poboljšanje postojećeg sistema kontinualne edukacije iz područja metrologije, kvaliteta i standardizacije , 32. Savetovanje proizvodnog mašinstva Srbije sa međunarodnim učešćem, Novi Sad: Fakultet tehničkih nauka, 18-20 Septembar, 2008, pp. 427-430, ISBN 978-86-7892-131-5 Hodolič J., Bešić I., Vukelić Đ., Budak I., Kuric I.: Savremeni prilazi u programiranju i postprocesiranju upravljačkih informacija za NUMM, 32. Savetovanje proizvodnog mašinstva Srbije sa međunarodnim učešćem, Novi Sad: Fakultet tehničkih nauka, 18-20 Septembar, 2008, pp. 525-528, ISBN 978-86-7892-131-5 Budak I., Soković M., Hodolič J., Kopač J.: Razvoj programskog sistema za pre-procesiranje tačaka na bazi fuzzy logike u reverzibilnom inženjerskom modeliranju , 32. Savetovanje proizvodnog mašinstva Srbije sa međunarodnim učešćem, Novi Sad: Fakultet tehničkih nauka - Departman za proizvodno mašinstvo, 18-20 Septembar, 2008, pp. 513-516, ISBN 978-86-7892-131-5 Crnobrnja B., Budak I., Ilić Mićunović M., Hodolič J., Kosec B.: Označavanje o zaštiti životne sredine – analiza oznaka tipa i prema SRPS ISO 14024:2003 , 4. Nacionalna konferencija o kvalitetu života, Kragujevac: Mašinski fakultet, 20-22 Maj, 2009, pp. 3-8, ISBN 978-86-86663-33-7 Ilić Mićunović M., Budak I., Crnobrnja B., Hodolič J., Kosec B.: Analiza samodeklarišućih oznaka o zaštiti životne sredine i njihova primena u Republici Srbiji, 6. Naučno-stručni skup sa međunarodnim učešćem "Kvalitet", Neum: Mašinski fakultet u Zenici, 4-7 Jun, 2009, pp. 489-494, ISBN 1512-9269 Agarski B., Budak I., Hodolič J.: Application of multicriterial analysis for assessment of environmental quality, 1. Medzinárodná vedecká konferencia Kvalita života obyvateľstva slovenska v Európskom kontexte, Skalica, 11-15 Novembar, 2009 Potran M., Puškar T., Budak I., Hodolič J., Bešić I., Lainović T., Blažić L.: Dobijanje virtuelnih modela zuba pomoću koordinatne merne mašine i industrijske kompjuterizovane tomografijе, 4. International Scientific Conference "Contemporary Materials", Banja Luka: Akademija nauka i umjetnosti Republike Srpske, 1-2 Jul, 2011, pp. 275-284, ISBN 978-99938-21-37-3 Simeunović N., Budak I., Ćosić I., Hodolič J.: Razvoj novog pristupa u organizaciji kontinualnog obrazovanja, 17. Skup "Trendovi razvoja" - TREND, Kopaonik: Fakultet tehničkih nauka u Novom Sadu, 7-10 Mart, 2011, pp. 257-260, ISBN 978-86-7892-323-4 Agarski B., Budak I., Puškar T., Vukelić Đ., Marković D., Hodolič J.: Objektivni pristup određivanju težina kriterijuma pri višekriterijmskom vrednovanju kvaliteta mera zaštite na radu u dentalnim laboratorijama, 7. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Fakultet tehničkih nauka, 12-13 Jun, 2013, pp. 83-86, ISBN 978-86-7892-512-2 Trifković B., Budak I., Vukelić Đ., Puškar T., Todorović A., Jevremović D., Hodolič J.: Pouzdanost stomatoloških CAD/CAM sistema za intraoralnu digitalizaciju, 7. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Fakultet tehničkih nauka, 12-13 Jun, 2013, pp. 55-58, ISBN 978-86-7892-512-2 Petrović P., Hodolič J., Budak I., Danilov I., Lukić N.: Senzorski sistemi bazirani na optičkoj triangulaciji i njihova primena u tehnologiji robotskog zavarivanja, 1. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Fakultet tehničkih nauka, 12-13 Jun, 2013, pp. 15-22, ISBN 978-86-7892-512-2 Spasić A., Movrin D., Budak I., Vučaj-Ćirilović V., Govorčin M., Till V.: Kompjuterizovana tomografija u izradi dentalnih nadoknada, 1. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Fakultet tehničkih nauka, 12-13 Jun, 2013, pp. 59-62, ISBN 978-86-7892-512-2 Šokac M., Santoši Ž., Spasić A., Til V., Vučaj-Ćirilović V., Govorčin M., Budak I.: Reverzibilno inženjersko modeliranje dentalnih nadoknada na bazi multi-slajs kompjuterizovane tomografije u programskom sistemu 3D Doctor, 1. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Fakultet tehničkih nauka, 12-13 Jun, 2013, pp. 63-66, ISBN 978-86-7892-512-2 Crnobrnja B., Budak I., Ostojić R.: Type I Environmental Labelling: Development of Serbian Ecolabeling programme, 1. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Fakultet tehničkih nauka, 12-13 Jun, 2013, pp. 195-198, ISBN 978-86-7892-512-2 Budak I., Milanković D., Milanović B., Hodolič J.: Nomination of Novi Sad for SETAC Europe 20th LCA Case Study Symposium 2014, 1. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Fakultet tehničkih nauka, 12-13 Jun, 2013, pp. 207-210, ISBN 978-86-7892-512-2 Crnobrnja B., Budak I., Ostojić R.: TYPE I ENVIRONMENTAL LABELLING - DEVELOPMENT OF SERBIAN ECO-LABELLING PROGRAMME , 1. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Fakultet tehničkih nauka, 12-13 Jun, 2013, pp. 195-198, ISBN 978-86-7892-512-2 Santoši Ž., Šokac M., Trifković B., Til V., Budak I.: Rekonstrukcija 3D modela ljudske vilice primenom fotogrametrijske metode, 9. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Fakultet tehičkih nauka, 19-20 Jun, 2014, pp. 115-118, ISBN 978-86-7892-616-7 Ilić Mićunović M., Budak I., Borzan M., Vukelić Đ., Medić V.: Emisija suspendovanih čvrstih čestica u radnoj sredini zubnih tehničara – zdravlje i bezbednost na radu, 8. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Fakultet tehničkih nauka, 19-20 Jun, 2014, pp. 183-186, ISBN 978-86-7892-616-7 Jevremović D., Trifković B., Sekulić S., Morisan-Basta I., Reljić A., Budak I., Vukelić Đ.: Primena različitih tehnoloških sistema za izradu bezmetalnih zubnih nadoknada, 8. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Fakultet tehničkih nauka, 19-20 Jun, 2014, pp. 99-102, ISBN 978-86-7892-616-7 Al-Jidah R., Agarski B., Budak I., Vilotić D., Kosec B., Hodolič J.: Monitoring i unapređenje aspekata životne sredine u toplanama, 9. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Fakultet tehničkih nauka u Novom Sadu, 19-20 Jun, 2014, pp. 179-182, ISBN 978-86-7892-616-7 Šokac M., Santoši Ž., Puškar T., Vučaj-Ćirilović V., Budak I.: Primena različitih modela segmentacije CBCT snimaka kod rekonstrukcije 3D modela donje vilice, 9. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Fakultet tehničkih nauka, 19-20 Jun, 2014, pp. 119-122, ISBN 978-86-7892-616-7 Crnobrnja B., Hodolič J., Tichá M., Petru J., Budak I.: ANALIZA AKTUELNOG STANJA U OBLASTI OZNAČAVANJA O ZAŠTITI ŽIVOTNE SREDINE TIPA I PREMA STANDARDU ISO 14024, 9. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Fakultet tehničkih nauka, 19-20 Jun, 2014, pp. 187-190, ISBN 978-86-7892-616-7 Ilić Mićunović M., Budak I., Kosec B., Vukelić Đ., Nagode A.: Ispitivanje čestica metodom analize slike prema ISO 13322, 9. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Fakultet tehničkih nauka, 19-20 Jun, 2015, pp. 129-132, ISBN 978-86-7892-712-6 Santoši Ž., Budak I., Trifković B., Šokac M., Soković M., Hodolič J.: 3D digitalizacija stomatoloških modela blisko-predmetnom fotogrametrijom potpomognutom projektovanom svetlošću, 9. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Fakultet tehničkih nauka , 19-20 Jun, 2015, pp. 29-32, ISBN 978-86-7892-712-6 Tadić A., Mirković S., Puškar T., Budak I., Šokac M.: Upotreba CBCT snimaka sa radiosenzitivnim zubima u planiranju implantološke terapije – prikaz slučaja, 9. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Fakultet tehničkih nauka, 19-20 Jun, 2015, pp. 1-4, ISBN 978-86-7892-713-3 Šokac M., Budak I., Ralević N., Spasić A., Santoši Ž., Vučaj-Ćirilović V., Til V.: Primena metode klasterizacije C-srednjih vrednosti kod segmentacije medicinskih snimaka, 9. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad: Fakultet tehničkih nauka, 19-20 Jun, 2015, pp. 33-36, ISBN 978-86-7892-713-3 Kosec B., Karpe B., Gogić D., Nagode A., Budak I., Ilić Mićunović M., Tanasić Z., Janjić G., Soković M.: LCA method as an useful tool in production engeneering, 11. Metallic and nonmetallic materials, Zenica: University of Zenica, 21-22 April, 2016, pp. 312-317, ISBN 978-9958-785-38-2 Santoši Ž., Šokac M., Budak I., Ralević N., Dramićanin M.: Primena fazi logike kao alata za poboljšanje kvaliteta fotografija kod 3D digitalizacije fokusiranjem defokusiranjem, 10. International Scientific Conference ETIKUM, Novi Sad: Faculty of Technical Sciences, Department of Production Engineering, 23-25 Jun, 2016, pp. 17-20, ISBN 978-86-7892-825-3 Santoši Ž., Korolija-Crkvenjakov D., Stojaković V., Obradović R., Budak I.: Model sistema za izbor metode 3D digitalizacije kod nepokretnog kulturnog nasleđa, 10. International Scientific Conference ETIKUM, Novi Sad: Faculty of Technical Sciences Department of Production Engineering, 23-25 Jun, 2016, pp. 177-180, ISBN 978-86-7892-825-3 Puškar S., Milovančev (Ilić) A., Vulin (rođ. Jovelić) A., Budak I., Šokac M.: Primena tehnologije multidetektorskog skenera za snimanje koronarnih krvnih sudova, 10. International Scientific Conference ETIKUM, Novi Sad: Fakultet tehničkih nauka u Novom Sadu, 23-25 Jun, 2016, pp. 69-72, ISBN 978-86-7892-825-3 Đurović Koprivica D., Budak I., Puškar T., Milekić (rođ. Jefić) B., Jeremić-Knežević M.: Izbor metode prenošenja pozicije dentalnih implanata na definitivan radni model sa aspekta tačnosti, 10. International Scientific Conference ETIKUM, Novi Sad: Fakultet tehničkih nauka u Novom Sadu, 23-25 Jun, 2016, pp. 85-88, ISBN 978-86-7892-825-3 Budak I., Šokac M., Santoši Ž.: Primena reverzibilnog inženjerskog modelovanja kod dizajniranja proizvoda, 1. Konferencija sa međunarodnim učešćem "Primena novih tehnologija i ideja u školskom inženjerskom obrazovanju", Požega (Užička): Tehnička škola , 15-16 Maj, 2017, pp. 109-112, ISBN 978-86-915487-1-1 Đurović Koprivica D., Budak I., Puškar T., Jeremić-Knežević M., Milekić (rođ. Jefić) B., Pivaš B., Marković D.: Primena kompjutera i računarom vođenih sistema u analizi okluzalnih kontakata (T-SCAN SISTEM), 11. Naučna konferencija sa međunarodnim učešćem (ETIKUM), Novi Sad, 6-8 Decembar, 2017, pp. 133-137 Agarski B., Budak I., Ilić Mićunović M., Kosec B., Vukelić Đ.: Ocenjivanje životnog ciklusa zbornika radova ETIKUM konferencije, 11. International Scientific Conference ETIKUM, Novi Sad: Fakultet tehničkih nauka, 6-8 Decembar, 2017, pp. 205-208, ISBN 978-86-6022-00-68 Šokac M., Budak I., Santoši Ž., Spasić A., Jakovljević Ž.: Uloga statističkih evaluatora i njihova primena kod analize tačnosti segmentiranih medicinskih snimaka , 11. International Scientific Conference ETIKUM, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, 6-8 Decembar, 2017, pp. 153-156, ISBN 978-86-6022-00-68 Laban Terzija J., Milekić (rođ. Jefić) B., Puškar T., Mirković S., Santoši Ž., Šokac M., Budak I.: Rešavanje problema retencije i stabilizacije gornje totalne proteze pomoću implanata, 11. International Scientific Conference ETIKUM, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, 6-8 Decembar, 2017, pp. 145-148, ISBN 978-86-6022-00-68 Budak I., Santoši Ž., Šokac M.: Metode 3D digitalizacije u studijskim programima na Fakultetu tehničkih nauka u Novom Sadu, 24. Trendovi razvoja - TREND, Kopaonik: Fakultet tehničkih nauka Univerziteta u Novom Sadu, 21-23 Februar, 2018, pp. 1-4, ISBN 978-86-7892-99 Jotić G., Štrbac B., Budak I., Hadžistević M.: Implementacija tehnike CAD-inspekcije na predmetima složenog geometrijskog oblika, 37. Savetovanje proizvodnog mašinstva Srbije - SPMS, Kragujevac: Univerzitet u Kragujevcu, Fakultet inženjerskih nauka, 25-26 Oktobar, 2018, pp. 113-119, ISBN 978-86-6335-057-1 Šokac M., Budak I., Jakovljević Ž., Santoši Ž., Vukelić Đ.: Pregled stanja i analiza najčešće primenjivanih metoda za segmentaciju slike, 12. International Scientific Conference ETIKUM, Novi Sad: Fakultet tehničkih nauka, 6-8 Decembar, 2018, pp. 81-84, ISBN 978-86-6022-123-2 Ilić Mićunović M., Kosec B., Budak I., Kojić V., Santoši Ž., Agarski B., Šokac M.: Ispitivanje karakteristika mikrostrukture koštanog grafta primenom ImageJ softvera, 12. International Scientific Conference ETIKUM, Novi Sad: ?Faculty of Technical Sciences, 6-8 Decembar, 2018, pp. 117-120, ISBN 978-86-6022-123-2 Fir B., Kosec B., Karpe B., Budak I., Jeklič D., Agarski B., Tanasić Z., Dečman I., Bernetić J., Soković M., Nagode A.: Waste Generation and Emissions Into The Air During Production of Armour Steel, 12. International Scientific Conference ETIKUM, Novi Sad: Fakultet tehničkih nauka, Univerzitet u Novom Sadu, 6-8 Decembar, 2018, pp. 125-128, ISBN 978-86-6022-123-2 Agarski B., Baloš S., Vukelić Đ., Hadžistević M., Trivković (Ristić) M., Pećanac M., Budak I.: Saradnja nauke i privrede kroz realizaciju inovacionih vaučera, 26. Trendovi razvoja - TREND, Kopaonik: Fakultet tehničkih nauka, Univerzitet u Novom Sadu, 16-19 Februar, 2020, pp. 332-335, ISBN 978-86-6022-241-3 Ilić Mićunović M., Agarski B., Budak I., Vukelić Đ.: Označavanje o zaštiti životne sredine proizvoda i usluga: implementacija u studijskim programima, 26. Trendovi razvoja - TREND, Kopaonik: Fakultet tehničkih nauka, Univerzitet u Novom Sadu, 16-19 Februar, 2020, pp. 278-281, ISBN 978-86-6022-241-3 Agarski B., Ilić Mićunović M., Budak I., Vukelić Đ.: Izbor odgovarajućih aktivnosti iz baze podataka kod analize inventara životnog ciklusa, 13. International Scientific Conference ETIKUM, Novi Sad: Fakultet tehničkih nauka, 2-4 Decembar, 2021, pp. 259-262, ISBN 978-86-6022-387-8 Šokac M., Đurović Koprivica D., Kuzmanović M., Santoši Ž., Vukelić Đ., Radumilo D., Budak I.: Preliminarna studija određivanja pozicije baze implantata sa ciljem njihove analize i merenja, 13. International Scientific Conference ETIKUM, Novi Sad: Fakultet tehničkih nauka, 2-4 Decembar, 2021, pp. 189-192, ISBN 978-86-6022-387-8 Ilić Mićunović M., Kuzmanović M., Budak I., Agarski B., Vukelić Đ.: Ispitivanje prisustva respiratornih aerosola prilikom stomatoloških intervencija, 14. International Scientific Conference ETIKUM, Novi Sad: Fakultet tehničkih nauka, 7-9 Decembar, 2023, pp. 145-148, ISBN 978-86-6022-618-3 Jovanović S., Budak I., Ilić Mićunović M., Agarski B.: Potrošnja električne energije i uticaj hotela na potencijal globalnog zagrevanja, 14. International Scientific Conference ETIKUM, Novi Sad: Fakultet tehničkih nauka, Univerzitet u Novom Sadu, 7-9 Decembar, 2023, pp. 213-216, ISBN 978-86-6022-617-6	63	63.00
M64	Saopštenje sa skupa nacionalnog značaja štampano u izvodu Saopštenje sa skupa nacionalnog značaja štampano u izvodu Hodolič J., Budak I., Antić A., Bešić I.: A New Approach of Measured Points Application Using the Reverse Engineering Metod in Manufacturing, 5. PETI NAUČNO-STRUČNI SKUP 'InterRegioSci 2010.', Novi Sad, 28 April, 2010, pp. 16-16 Puškar T., Trifković B., Drecun M., Živković R., Stančić I., Budak I., Marković D.: Terapijske mogućnosti zbrinjavanja bezubih pacijenata(prikaz slučaja), 2. Simpozijum stomatologa i saradnika sa međunarodnim učešćem, Novi Sad, 27-28 Maj, 2011, pp. 83-83 Lainović T., Blažić L., Puškar T., Potran M., Trifković B., Budak I., Marković D.: Računarski podržano obrazovanje u stomatologiji, 2. Simpozijum stomatologa i saradnika sa međunarodnim učešćem, Novi Sad, 27-28 Maj, 2011, pp. 37-37, ISBN 978-86-7473-553-4 Lainović T., Trifković B., Puškar T., Blažić L., Potran M., Budak I., Hodolič J.: Virtuelni artikulator, 18. Simpozijum protetičara Srbije, Divčibare, 16-19 Jun, 2011, pp. 109-109, ISBN 978-86-6061-012-8 Puškar T., Potran M., Marković D., Lainović T., Blažić L., Budak I., Bešić I.: Upotreba koordinatne merne mašine za dobijanje virtuelnog modela, 2. Simpozijum stomatologa i saradnika sa međunarodnim učešćem, Novi Sad, 27-28 Maj, 2011, pp. 37-37, ISBN 978-86-7473-553-4 Ilić Mićunović M., Puškar T., Marković D., Hodolič J., Budak I.: Analiza zagađenosti laboratorija za stomatološku protetiku inhalativnih frakcijama prašine, 2. Simpozijum stomatologa i saradnika sa međunarodnim učešćem, Novi Sad, 27-28 Maj, 2011, pp. 41-41, ISBN 978-86-7473-577-0 Hodolič J., Hadžistević M., Budak I., Vukelić Đ., Agarski B.: Procena uticaja proizvodnih procesa na životnu sredinu ocenjivanjem životnog ciklusa sa ciljem unapređenja kvaliteta proizvoda i procesa, 7. InterRegioSci, Novi Sad: Pokrajinski sekretarijat za nauku i tehnološki razvoj, Vlada Autonomne Pokrajine Vojvodine, 8 Maj, 2014 Agarski B., Ilić Mićunović M., Budak I., Vukelić Đ., Hadžistević M., Hodolič J.: Višekriterijumsko vrednovanje ukupnog opterećenja životne sredine urbanog područja, 7. Simpozijum Hemija i zaštita životne sredine sa međunarodnim učešćem - EnviroChem, Palić: Srpsko hemijsko društvo, 9-12 Jun, 2015, pp. 77-78, ISBN 978-86-7132-058-0 Hodolič J., Hadžistević M., Budak I., Vukelić Đ., Agarski B.: Unapređenje kvaliteta proizvoda i procesa primenom metoda ocenjivanja životnog ciklusa i višekriterijumske analize, 8. InterRegioSci, Novi Sad: Autonomna pokrajina Vojvodina, Pokrajinski sekretarijat za nauku i tehnološki razvoja, 2015 Korolija-Crkvenjakov D., Santoši Ž., Budak I., Sladoje N., Stojaković V.: 3D digitization as a tool in the conservation and recreation of cultural heritage: A case study of the iconostasis of a destroyed Serbian Orthodox church in Buda, 13. Digitalizacija kulturne baštine i digitalna humanistika, Beograd: Matematički fakultet , Univerzitet u Beogradu, 10-11 Septembar, 2015, pp. 5-5, ISBN 978-86-7589-103-1 Agarski B., Nikolić V., Kamberović Ž., Anđić Z., Kosec B., Budak I.: Exergy Life Cycle Assessment of Ni-based Catalyst Synthesis Processes, 24. International Symposium on Analytical and Environmental Problems (ISAEP), Segedin: University of Szeged, 8-9 Oktobar, 2018, pp. 5-5, ISBN 978-963-306-623-2	11	5.00
M71	Odbranjena doktorska disertacija Odbranjena doktorska disertacija Budak I.: Development of the System for Intelligent Pre-Processing of 3D-Digitization Results from Free-Form Surfaces , Ljubljana, Univerzitet u Ljubljani, Mašinski fakultet, 2009, UDK: 658.5 (043.3)	1	6.00
M72	Odbranjen magistarski rad Odbranjen magistarski rad Budak I.: Razvoj eksperimentalnog sistema za reverzibilno inženjersko projektovanje složenih površina , Novi Sad, Fakultet tehničkih nauka, 2004	1	0.00
M82	Novo tehničko rešenje primenjeno na nacionalnom nivou Novo tehničko rešenje primenjeno na nacionalnom nivou Budak I., Tadić B., Jeremić B., Vukelić Đ., Miljanić D., Todorović P., Hodolič J.: Industrijski prototip uređaja za ispitivanje statičke popustljivosti i nosivosti spoja elemenata za stezanje i radnog predmeta, 2012 Šokac M., Budak I., Jakovljević Ž., Vukelić Đ., Santoši Ž.: Programski sistem za segmentaciju snimaka generisanih primenom kompjuterizovane tomografije, 2020	2	16.00
M85	Prototip, nova metoda, softver, standardizovan ili atestiran instrument, Prototip, nova metoda, softver, standardizovan ili atestiran instrument, Budak I., Soković M., Hodolič J., Kopač J.: Softver za pre-procesiranje rezultata 3D-digitalizacije, 2010 Santoši Ž., Budak I., Trifković B., Šokac M., Vukelić Đ., Hadžistević M., Hodolič J.: Nova metoda za akviziciju geometrijskih podataka u dentalnoj protetici na bazi blisko-predmetne fotogrametrije, 2015 Šokac M., Budak I., Mirković S., Puškar T., Santoši Ž.: Metod za modelovanje kastomizovanih koštanih graftova u stomatologiji, 2015 Agarski B., Budak I., Srđević B., Vukelić Đ., Ilić Mićunović M., Hodolič J.: Programski sistem za inteligentnu višekriterijumsku analizu proizvoda i procesa, 2015 Vukelić Đ., Živković M., Miljojković J., Kočović V., Budak I.: Uređaj za ispitivanje apsorpcije vode drvenih radnih predmeta, 2017	5	0.00
M86	Kritička evaluacija podataka, baza podataka, Kritička evaluacija podataka, baza podataka, Hodolič J., Ćosić I., Budak I., Matin I., Simeunović N., Hadžistević M., Vukelić Đ., Antić A., Bešić I.: Baza podataka sa softverskom aplikacijom kao podrška platformi za kontinualnu edukaciju FTN-a, 2010	1	0.00