Prezime:	Anišić
Ime:	Zoran
APVNT broj:	102
Organizacija:	Fakultet tehničkih nauka u Novom Sadu

Produkcija - zbirni rezultati
Oznaka	Naziv kriterijuma produkcije	Broj	Poena
		243	293.50
M14	Monografska studija/poglavlje u knjizi M12 ili rad u tematskom zborniku međunarodnog značaja Monografska studija/poglavlje u knjizi M12 ili rad u tematskom zborniku međunarodnog značaja Ćosić I., Anišić Z.: Methodology for assembly suitability enhancement as a part of integrated product development, DAAAM International Scientific Book 2003, Beč, DAAAM International Viena, 2003, ISBN 3-901509-30-5 Firstner (Fürstner) I., Anišić Z., Ćosić I.: Integrated product development in Internet surroundings, DAAAM International Scientific Book 2005, Beč, Published by DAAAM International Viena, 2005, str. 179-192, ISBN 1726-9687 Anišić Z., Tudjarov B., Firstner (Fürstner) I., Ćosić I.: Intelligent Production Systems Way to Competitiveness and Innovative Engineering, Chapter 3.: Intelligent product configurators as a competitive advantage for companies, Skoplje, EME Skopje and FME Maribor, 2009, str. 41-51, ISBN 978-9989-2701-4-7, UDK: 681.5:001.895; 004.42.045:621.9, Ukupno strana: 9 Anišić Z., Firstner (Fürstner) I., Ćosić I.: Mass Customization: Some Trends and Research, Chapter 52 in DAAAM International Scientific Book 2009, Vienna, DAAAM International, 2009, str. 521-530, ISBN 978-3-901509-69-8 Anišić Z., Freund R., Suzić N.: Mass Customization and Personalization in Southeast Europe, DAAAM International Scientific Book 2013, Vienna, DAAAM International Publishing DAAAM International Vienna, 2013, str. 389-416, ISBN 978-3-901509-94-0 Sandrin E., Forza C., Anišić Z., Suzić N., Grosso C., Aichner T., Trentin A.: "Shoe configurators: A comparative analysis of capabilities and benefits", chapter 9 in book "Mass Customized Manufacturing: Theoretical Concepts and Practical Approaches", CRC Press Taylor & Francis, Editor: Vladimir Modrak, 2016, str. 195-218, ISBN 9781498755450	6	24.00
M21	Rad u vrhunskom međunarodnom časopisu Rad u vrhunskom međunarodnom časopisu Suzić N., Forza C., Trentin A., Anišić Z.: Implementation guidelines for mass customization: current characteristics and suggestions for improvement, Production Planning and Control, 2018, Vol. 29, No. 10, pp. 856-871, ISSN 0953-7287	1	8.00
M22	Rad u istaknutom međunarodnom časopisu Rad u istaknutom međunarodnom časopisu Firstner (Fürstner) I., Anišić Z., Takač M.: Product Configurator Self-Adapting to Different Levels od Customer Knowledge, Acta Polytechnica Hungarica, Journal of Applied Sciences, 2012, Vol. 9, No. 4, pp. 129-150, ISSN 1785-8860 Suzić N., Stevanov B., Ćosić I., Anišić Z., Sremčev N.: Customizing Products trough Application of Group Technology: A Case Study of Furniture Manufacturing, Strojniski vestnik - Journal of Mechanical Engineering, 2012, Vol. 58, No. 12, pp. 724-731, ISSN 0039-2480 Anišić Z., Veža I., Suzić N., Sremčev N., Orčik A.: Improving product design with IPS-DFX methodology incorporated in PLM software, Tehnički vjesnik - Technical Gazette, 2013, pp. 183-193, ISSN 1330-3651 Gajić D., Mihić S., Dragan D., Petrović V., Anišić Z.: "Simulation of Photogrammetry-based 3D Data Acquisition", International Journal of Simulation Modelling, 2019, Vol. 18, No. 1, pp. 59-71, ISSN 1726-4529 Medić N., Anišić Z., Lalić B., Marjanović U., Brezočnik M.: Hybrid fuzzy multi-attribute decision making model for evaluation of advanced digital technologies in manufacturing: Industry 4.0 perspective, Advances in Production Engineering and Management, 2019, Vol. 14, No. 4, pp. 483-493, ISSN 1854-6250 Demko-Rihter J., Sassanelli C., Pantelic M., Anišić Z.: A Framework to Assess Manufacturers’ Circular Economy Readiness Level in Developing Countries: An Application Case in a Serbian Packaging Company, Sustainability, 2023, Vol. 15, No. 8, ISSN 2071-1050	6	30.00
M23	Rad u međunarodnom časopisu Rad u međunarodnom časopisu Anišić Z., Krsmanović C.: Assembly Initiated Production as a Prerequisite for Mass Customization and Effective Manufacturing, Strojniski vestnik - Journal of Mechanical Engineering, 2008, Vol. 54, No. 9, pp. 607-618, ISSN 0039-2480, UDK: 658.5 Rackov M., Kuzmanović S., Anišić Z.: Selecting the Size of the Universal Reducer, Taking into the Account its Thermal Load Capacity, Tehnički vjesnik - Technical Gazette, 2018, Vol. 25, No. 6, pp. 1829-1836, ISSN 1330-3651, UDK: 681.833.1:519.254	2	6.00
M31	Predavanje po pozivu sa međunarodnog skupa štampano u celini Predavanje po pozivu sa međunarodnog skupa štampano u celini Anišić Z.: Some Results of the Implementation of the MC Concept in Small Companies , 2. International Conference on Mass Customization and Personalization in Central Europe MCP-CE, Rzeszow: Univesrity for Technology and Informatics, 24-26 May, 2006, pp. 5-25, ISBN 83-87658-96-0	1	3.00
M33	Saopštenje sa međunarodnog skupa štampano u celini Saopštenje sa međunarodnog skupa štampano u celini Ćosić I., Warschat J., Stankovski S., Anišić Z.: A contribution to the development of an expert system for assembly system design, 12. International Conference on Production Research - ICPR, Lappeeranta: Elsevier Science Publishers, 16 August, 1993, pp. 377-378 Ćosić I., Anišić Z., Radlovački V.: On the Relationship Between the Duration of Assembly Cycle and the Number of the Product Variants, 1. Internacional Conference on Technical lnformatitcs, Temišvar, 16-19 November, 1994, pp. 34-41 Ćosić I., Anišić Z., Radlovački V.: Some results from applying a flexible concept of assembly systems designing and assessment of the simulation effects, 13. International Conference on Production Research - ICPR, Jerusalem, 1 August, 1995, pp. 318-320 Ćosić I., Anišić Z.: Development of flexible assembly systems using simulation method, 12. International Conference on Systems Science, Varšava, 12-15 September, 1995, pp. 283-287 Ćosić I., Anišić Z.: Rapid prototyping based on the group technology, 28. International Symposium on Automotive Technology & Automation - ISATA, Stuttgart, 11-15 September, 1995 Ćosić I., Anišić Z., Vujasinović N.: Resources planning in flexible assembly systems using simulation method, 1. MicroCAD, Miskolc, 29 February, 1996, pp. 91-95 Ćosić I., Anišić Z.: Simulation as a tool for assembly system designing and optimization, 2. Internacional Conference on Technical lnformatitcs, Temišvar, 14-16 November, 1996, pp. 25-30 Ćosić I., Anišić Z.: Simulation as a backgroung for multy-criterion ranking of alternatives, 14. International Conference on Production Research - ICPR, Osaka, 4-8 August, 1997, pp. 266-269 Ćosić I., Anišić Z., Mitraković Đ.: The choice of the optimal hybrid engine for city buses for yugoslav conditions, 31. International Symposium on Automotive Technology & Automation - ISATA, Dusseldorf, 2-5 June, 1998, pp. 359-366 Borocki J., Anišić Z.: ONE METHOD FOR DETERMING COMPANY'S STRATEGIC POSITION , 12. International Computer Science Conference - microCAD, Miskolc, 24-26 February, 1998 Ćosić I., Anišić Z.: Some results in applying simulation in assembly systems designing and assessment of its characteristics, 1. Tools Conference, Bratislava, 1 September, 1999, pp. 81-84 Anišić Z., Ćosić I.: DFX - software development and its applications, 2. Symposium on the topic: "Young people and multidisciplinary research", Temišvar, 23-25 September, 1999 Ćosić I., Anišić Z., Firstner (Fürstner) I.: Development of dfa and dfm modules in cad environment, 2. Tools Conference, Trencin, 1 September, 2000, pp. 236-240 Ćosić I., Anišić Z., Firstner (Fürstner) I.: Development of DFA and DFM Modules in CAD Environment, 1. International Conference - TOOLS, Trenčin, 12 April, 2000, pp. 236-239 Ćosić I., Anišić Z.: Dynamical modelling and techno-economical estimation of the assembly systems, 2. International Conference Business Systems Management UPS, Mostar, 31-2 May, 2001 Ćosić I., Anišić Z.: IIS-DFA software for rating and enhancment of the design for assembly suitability, 2. International Conference Business Systems Management UPS, Mostar, 31-2 May, 2001 Ćosić I., Anišić Z.: An integrated approach toward the enhancement of the design for assembly suitability, 16. ICPR, Prag, 29-3 July, 2001, pp. 70-82 Ćosić I., Anišić Z.: Complex iis-dfa methodology as a key part of the integrated process and product development , 13. DAAAM International Symposium, Vienna, 23-26 October, 2002 Kuzmanović S., Ćosić I., Anišić Z.: Effects of the adopted assembly sequence of the universal reducers on the complexity of part manufacturnig, 4. Tools Conference, Kočovce, 11 April, 2002 Ćosić I., Anišić Z., Lalić B.: Modularnost kao ključni koncept u projektovanju za životni ciklus proizvoda, 6. Međunarodni naučno-stručni skup o dostignućima elektrotehnike, mašinstva i informatike - DEMI, Banja Luka, 30-31 May, 2003, pp. 193-200 Ćosić I., Anišić Z., Firstner (Fürstner) I.: Design for Environment in IPS-DFX Methodology for Integrated Product Development as a part of Concurrent Engineering , 1. SISY - International Symposium on Intelligent systems and Informatics, Subotica: Viša tehička škola Subotica, 19-20 September, 2003, pp. 101-112, ISBN 9637154191 Ćosić I., Anišić Z., Firstner (Fürstner) I., Lalić B.: Design for Environment as a part of the IPS-DFX methodology for Integrated Product Development, 3. PSU-UNS International Conference: Energy and the Environment, Songkhla, 11-12 December, 2003 Ćosić I., Anišić Z., Lalić B.: Group technology as a basis for mass customiyation, 14. DAAAM International Symposium, Sarajevo, 22-25 October, 2003 Ćosić I., Anišić Z., Lalić B.: IPS-DFA metdology toward increasing teh mass-customiyation of the circular pump program variety, 2. Interdisciplinary World Congress on Mass Customization and Personalization, Minhen, 6-8 October, 2003 Anišić Z., Ćosić I., Lalić B.: Some Cases in Applying Concept ff MC in Production System Designing, 1. International Conference on Mass Customization and Personalization - Theory and Practice in Central Europe, Rzeszow, 20-21 April, 2004, UDK: CD ROM Anišić Z., Ćosić I., Kuzmanović S.: The Influence of Customization and Requests for Prompt Delivery on Gearmotor Design Concept, 6. Tools Conference, Kočovce, 11 April, 2004, pp. 68-74, UDK: CD ROM Anišić Z., Ćosić I., Lalić B.: Mass Customization and the Process of Production Systems Designing - Case Study, 1. Scientific conference with international participation: Manufacturing and management in 21st century, Ohrid, 16-17 September, 2004 Firstner (Fürstner) I., Anišić Z., Ćosić I.: Methodology for Connecting the Participants in the Process of Integrated Product Development in Internet Surroundings, 15. DAAAM International Symposium, Beč: DAAAM International Vienna, 3-6 November, 2004, pp. 115-116, ISBN 3-901509-42-9 Firstner (Fürstner) I., Anišić Z., Ćosić I.: An Approach for Connecting the Participants in the Process of Product Development in Internet Surroundings, 2. Serbian-Hungarian Joint Symposium on Intelligent Systems SISY, Subotica: Viša tehička škola Subotica, 1-2 October, 2004, pp. 183-190, ISBN 9637154329 Ćosić I., Anišić Z., Firstner (Fürstner) I., Lalić B.: Design for Environment as a part of the IPS-DFX methodology for Integrated Product Development, 8. International Symposium on Interdisciplinary Regional Research - ISIRR, Segedin, 19-21 April, 2005 Ćosić I., Anišić Z., Firstner (Fürstner) I.: Design for Environment as a part of the IPS-DFX methodology for Integrated Product Development, 8. International Symposium on Interdisciplinary Regional Research - ISIRR, Segedin, 19-21 April, 2005 Anišić Z., Ćosić I.: An Integrated Design for Assembly Methodology, 18. International Conference on Production Research - ICPR, Fisciamo, 31-4 July, 2005, UDK: CD ROM Firstner (Fürstner) I., Anišić Z., Ćosić I.: Methodology for Connecting the Participants in the Process of Integrated Product Development in Internet Surroundings, 18. International Conference on Production Research - ICPR, Fisciamo, 31-4 July, 2005, ISBN 88-87030-96-0 Lazarević M., Ćosić I., Anišić Z.: Contribution To Development Of Technological Structures For End-Of-Life Products, 16. DAAAM International Symposium, Opatija: Sveučilište Josipa Juraja Štrosmajera, 19-22 October, 2005, pp. 367-365, ISBN 953-6048-29-9 Anišić Z., Ćosić I., Lalić B.: The choice of optimal product configurator in mass cutomization strategy, 16. DAAAM International Symposium, Opatija, 19-22 October, 2005 Ćosić I., Anišić Z., Lazarević M.: Contribution to development of technological structures for end-of-life products, 16. DAAAM International Symposium, Opatija, 19-22 October, 2005 Ćosić I., Lazarević M., Anišić Z., Lalić B.: Data Gathering Using Rfid Technology From Disassembly and Recycling Systems, 17. DAAAM International Symposium, Beč: Published by DAAAM International, 8-11 November, 2006, pp. 85-86, ISBN 3-901509-57-7 Lazarević M., Ćosić I., Anišić Z.: RFID Tehnologies In Product Disassembly Process, 17. DAAAM International Symposium, Beč: DAAAM International Vienna, 8-11 November, 2006, pp. 129-137 Anišić Z.: Mass Customization in Food Industry , 7. International Conference on Food Science, Segedin, 20 April, 2006, pp. 1-6, ISBN 963-482-676-8, UDK: Proceedings (CD-ROM) Anišić Z.: Design and Implementation of Product Configuration Systems in Small Companies , 1. International Mass Customization Meeting - IMCM, Hamburg: GITO-Verlag 2007 Berlin, 21-22 June, 2007, pp. 11-22, ISBN 978-3-940019-03-5 Anišić Z., Ćosić I., Lalić B.: Design and Implementation of products Configuration System in Small Companies, 1. International Mass Customization Meeting - IMCM, Hamburg, 21-22 June, 2007, pp. 11-21, ISBN 978-3-940019-03-5 Bošnjak S., Anišić Z., Kudlik E., Francišković G.: Industrial Park as a Tool of Boosting Regional Competences and Development, 1. International Conference for Entrepreneurship, Innovation and Regional Development - ICEIRD, Skoplje: Business Start-up Center, Unversity "Ss.Cyril and Methodius" Skopje, 9-11 May, 2008, pp. 78-83, ISBN 978-9989-2636-4-4, UDK: 001.896(062) Anišić Z., Duvnjak S., Mitrović T.: Concept of Customized Turistic Offer of Vojvodina Region, 3. International Conference on Mass Customization and Personalization in Central Europe MCP-CE, Palić: FTN Novi Sad, 3-6 June, 2008, pp. 1-6, ISBN 978-86-7892-114-8, UDK: 005.001.895(4-11) Firstner (Fürstner) I., Anišić Z., Ćosić I.: Overview of Current Research Results of Mass Customization, 3. International Conference on Mass Customization and Personalization in Central Europe MCP-CE, Palić: Faculty of Technical Sciences in Novi Sad, 3-6 June, 2008, pp. 65-74, ISBN 978-86-7892-114-8, UDK: 005.001.895(4-11) Firstner (Fürstner) I., Anišić Z., Ćosić I.: Mass Customization: Trends and Research, 19. DAAAM International Symposium, Trnava: DAAAM International Vienna, Vienna, 22-25 October, 2008, pp. 519-520, ISBN 978-3-901509-68-1 Katić A., Anišić Z., Lalić D., Ćosić I.: Open Innovations as a Model for Increasing Competitiveness and Knowledge Transfer, 2. International Conference for Entrepreneurship, Innovation and Regional Development - ICEIRD, Thessaloniki, 24-25 April, 2009 Firstner (Fürstner) I., Anišić Z.: Adaptive Product Configuration for Thermal Insulation of Buildings, 20. DAAAM International Symposium, Beč: DAAAM International Vienna, 25-28 November, 2009 Firstner (Fürstner) I., Anišić Z.: Self-Adaptive Product Configurator for Thermal Insulation, 10. International Symposium of Hungarian Researchers on Computational Intelligence and Informatics, Budimpešta: Budapest Tech, 21-23 November, 2009, pp. 669-680, ISBN 978-963-7154-96-6 Anišić Z., Tudharov B., Tsigkas A., Chatzopoulos C., Freund R.: Mapping of Mass Customization Activities in Central and Southeast Europe, 2. International Conference for Entrepreneurship, Innovation and Regional Development - ICEIRD, Thessaloniki: South-East European Research Center, Thessaloniki, 24-25 April, 2009, pp. 424-431, ISBN 978-960-89629-9-6 Freund R., Chatzopoulos C., Tsigas A., Anišić Z.: Open Innovation for Entrepreneurs in Central European Region, 2. International Conference for Entrepreneurship, Innovation and Regional Development - ICEIRD, Thessaloniki: South-East European Research Center, Thessaloniki, 24-25 April, 2009, pp. 432-439, ISBN 978-960-89629-9-6 Firstner (Fürstner) I., Anišić Z.: Masterplast Intelligent Product Configurator - The New Approach in Thermo Insulation of Buildings, 1. International Scientific Conference Management of Technology Step to Sustainable Production - MOTSP, Šibenik: Faculty of Mechanical Engineering and Naval Architecture Zagreb, 10-12 June, 2009, pp. 256-261, ISBN 978-953-6313-09-9 Čović Z., Firstner (Fürstner) I., Anišić Z., Freund R.: Web Based Intelligent Product Configurator for Thermal Insulation and Decoration of Buildings, 7. SISY - International Symposium on Intelligent systems and Informatics, Subotica, 25-26 September, 2009, pp. 253-258, ISBN 978-1-4244-55349-8 Firstner (Fürstner) I., Anišić Z.: Adaptive Product Configurator for Different Level of Customers' Knowledge, 5. International Conference on Mass Customization and Personalization - MCPC, Helsinki: Aalto University School of Art and Design, Helsinki, 4-8 October, 2009, pp. 1-20, ISBN ISBN 978-952-60-0033, UDK: ISSN 0782-1778 Firstner (Fürstner) I., Anišić Z., Freund R.: Implementation of adaptive product configuration as an additional tool for sustainable product lifecycle, 2. Management of Technology – Step to Sustainable Production - MOTSP, Rovinj: Fakultet strojarstva i brodogradnje, 2-4 June, 2010, ISBN 978-953-7738-09-9 Firstner (Fürstner) I., Anišić Z.: A Possibility for Optimal Customer Profile Definition, 11. CINTI - International Symposium on Computational Intelligence and Informatics, Budimpešta: Hungarian Fuzzy Associtation, 18-20 November, 2010, pp. 245-250, ISBN 978-1-4244-9278-7 Suzić N., Anišić Z., Ćosić I.: Reconfiguring Production and Organizational Structures for Mass Customization, 4. International Conference on Mass Customization and Personalization in Central Europe MCP-CE, Novi Sad: Fakultet tehničkih nauka , 23-24 September, 2010, pp. 153-162, ISBN 978-86-7892-277-0 Firstner (Fürstner) I., Anišić Z., Freund R.: Adaptive customer profile configuration in mass customization, 8. IEEE International Symposium on Intelligent Systems and Informatics (SISY), Subotica, 2010, pp. 335-340, ISBN 978-1-4244-7395-3 Firstner (Fürstner) I., Anišić Z.: One approach towards defining appropriate customer profile, 4. International Conference on Mass Customization and Personalization in Central Europe MCP-CE, Novi Sad: Univerzitet u Novom Sadu - Fakultet tehničkih nauka, 23-24 September, 2010, pp. 57-64, ISBN 978-86-7892-277-0, UDK: 255822599 Čović Z., Firstner (Fürstner) I., Anišić Z., Freund R.: Development of web based intelligent product configurator, 4. International Conference on Mass Customization and Personalization in Central Europe MCP-CE, Novi Sad: University of Novi Sad - Faculty of Technical Sciences, 23-24 September, 2010, ISBN 978-86-7892-277-0, UDK: 255822599 Gečevska V., Buchmeister B., Anišić Z., Lalić B.: Product Lifecycle Management with Knowledge Management as a Strategic Approach for Innovative Enterprise Environment, 3. International Conference for Entrepreneurship, Innovation and Regional Development - ICEIRD, Novi Sad: Fakultet tehničkih nauka, 27-29 May, 2010, pp. 260-267, ISBN 978-86-7892-250-3 Freund R., Anišić Z.: How to Use Complexity and Uncertainty for New Business, 3. International Conference for Entrepreneurship, Innovation and Regional Development - ICEIRD, Novi Sad: Fakultet tehničkih nauka, 27-29 May, 2010, pp. 255-259, ISBN 978-86-7892-250-3 Anišić Z., Šešlija D., Milenković I., Mladenović V.: PLM master curriculum design at University of Novi Sad - Faculty of Technical Sciences, 8. The IFIP WG 5.1 International Conference on Product Lifecycle Management, Eindhoven: Technical University Eindhoven, 11-13 July, 2011, pp. 515-524, ISBN 978-90-79182-26-8 Firstner (Fürstner) I., Anišić Z., Zuban E., Kovács K.: Automated Tourism Package, 9. SISY - International Symposium on Intelligent systems and Informatics, Subotica: Subotica Tech, 8-10 September, 2011, ISBN 978-1-45777-1973-8 Kajmakoska B., Lombardi F., Chiabert P., Anišić Z., Gečevska V.: Continuous Innovativeness Supported by Integrated Computer-based and PLM Solutions, 15. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Fakultet tehničkih nauka, 14-16 September, 2011, pp. 461-466, ISBN 978-86-7892-341-8 Chatzopoulos C., Tsigkas A., Anišić Z., Freund R.: Making Between Flow Manufacturing and Mass Customization Industries, 15. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Fakultet tehničkih nauka, 14-16 September, 2011, pp. 53-59, ISBN 978-86-7892-341-8 Servo M., Anišić Z.: Possibilities of Forecasting In Small and Medium Enterprises, 15. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Fakultet tehničkih nauka, 14-16 September, 2011, pp. 38-43, ISBN 978-86-7892-341-8 Chatzimichailidou M., Tsigkas A., Lukač D., Anišić Z.: Applying Living Lab Strategy in Real Life Conditions, 4. International Conference for Entrepreneurship, Innovation and Regional Development - ICEIRD, Ohrid, 5-7 May, 2011, pp. 132-139, ISBN 978-608-65144-2-6 Sremčev N., Suzić N., Ćosić I., Anišić Z.: Enabling DFx Tools Using PLM Software Solutions, 1. Regional Conference - Mechatronics in Practice and Education (MECHEDU), Subotica: Subotica Tech, College of Applied Sciences, , 8-10 December, 2011, pp. 363-369, ISBN 978-86-85409-67-7, UDK: 007.5 (082) Freund R., Anišić Z., Demko-Rihter J., Jovanović D.: Customer Co-creation and New Economic Sociology, 5. International Conference for Entrepreneurship, Innovation and Regional Development - ICEIRD, Sofija: St. Kliment Ohridski University, 1-2 June, 2012, pp. 281-286, ISBN 978-954-07-3346-3 Sremčev N., Suzić N., Anišić Z., Gecevska V.: Improving Product Design Efficiency Using DFX Tools in PLM Surroundings, 7. Simpozijum o konstruisanju, oblikovanju i dizajnu – KOD, Balatonfured: Faculty of Technical Sciences, 24-26 May, 2012, pp. 79-84, ISBN 978-86-7892-399-9 Suzić N., Anišić Z., Orčik A., Sremčev N.: Company Size and Successful Mass Customization, 5. International Conference on Mass Customization and Personalization in Central Europe MCP-CE, Novi Sad: Faculty of Technical Sciences, 19-21 September, 2012, pp. 241-246, ISBN 978-86-7892-432-3 Suzić N., Anišić Z., Forza C.: Preconditions for Implementation of Mass Customization Strategy in SME's, 5. International Conference for Entrepreneurship, Innovation and Regional Development - ICEIRD, Sofija: St. Kliment Ohridski University Press, 1-2 June, 2012, pp. 830-837, ISBN 978-954-07-3346-3 Anišić Z.: Customer Co-Creation in Product Design and Product Configurators, 4. Menadzment, Mladenovac: Fakultet za poslovno industrijski menadžment, 20-21 April, 2012, pp. 24-30, ISBN 978-86-84909-73-4 Firstner (Fürstner) I., Anišić Z., Nađ A.: Automated tourism package configurator – first results, 10. SISY - International Symposium on Intelligent systems and Informatics, Subotica, 20-22 September, 2012, pp. 345-350 Stojanova T., Gečevska V., Anišić Z.: Mass Customization – Tool for Growing Product Variety, 4. International Scientific Conference Management of Technology Step to Sustainable Production - MOTSP, Zadar: Croatian Association for PLM, Zagreb, Croatia, 2012, 14-16 June, 2012, pp. 99-106, ISBN 1848-5022 Orčik A., Anišić Z., Gečevska V., Veža I.: Implementation of PLM Strategy in the Process of the New Product Development in Chemical Industry, 4. International Scientific Conference Management of Technology Step to Sustainable Production - MOTSP, Zadar: Croatian Association for PLM, Zagreb, Croatia, 2012, 14-16 June, 2012, pp. 133-139, ISBN 1848-5022 Anišić Z., Koldžin D.: Innovation Policy Model for Supporting Open Innovations, 5. International Conference on Mass Customization and Personalization in Central Europe MCP-CE, Novi Sad: Fakultet tehničkih nauka u Novom Sadu, 19-21 September, 2012, pp. 6-12, ISBN 978-86-7892-432-3 Firstner (Fürstner) I., Anišić Z.: One Possibility to Automate Tourist Offer, 5. International Conference on Mass Customization and Personalization in Central Europe MCP-CE, Novi Sad: Fakultet tehničkih nauka u Novom Sadu, 19-21 September, 2012, pp. 74-81, ISBN 978-86-7892-432-3 Orčik A., Mirčetić D., Anišić Z., Matović B.: Integration of Lean Management Methods in Product Lifecycle Management Concept, 1. International Scientific Conference on Lean Technologies (LeanTech), Novi Sad: Fakultet tehničkih nauka u Novom Sadu, 13-14 September, 2012, pp. 251-257, ISBN 978-86-7892-445-3, UDK: 62-5(082), 005.7(082) Orčik A., Anišić Z., Ćosić I.: Collaboration and New Product Development in PLM Environment, 23. DAAAM International Symposium, Zadar: Published by DAAAM International, Vienna, 24-27 October, 2012, pp. 1091-1094, ISBN 978-3-901509-91-9, UDK: ISSN 2304-1382 Firstner (Fürstner) I., Anišić Z.: Solution Diversity in Mechatronics, 14. International Workshop on Research and Education in Mechatronics - REM, Vienna, 6-7 June, 2013 Orčik A., Anišić Z., Fuerstner I., Suzić N., Sremčev N.: Co-creation in product development - students in an innovation contest, 1. International Conference on Technology Transfer - ICTT, Niš: University of Niš, and Faculty of Electronic Engineering Niš, 20-21 June, 2013, pp. 259-264, ISBN 978-86-6125-083-5 Sremčev N., Stevanov B., Suzić N., Anišić Z.: Managing Data in Multiple Locations Production Systems: Case Study of The Railway Braking Devices Overhaul, 2. Regional Conference - Mechatronics in Practice and Education (MECHEDU), Subotica: Subotica Tech – College of Applied Sciences, , 5-6 December, 2013, pp. 93-98, ISBN 978-86-7892-565-8 Suzić N., Anišić Z., Forza C.: Introducing Mass Customization to SMEs in Furniture Industry: A Case Study, 7. World Conference on Mass Customization, Personalization, and Co-Creation (MCPC), Aalborg: Springer, 4-7 February, 2014, pp. 287-300, ISBN 978-3-319-04270-1 Suzić N., Forza C., Anišić Z.: Mass Customization Techniques – State of the Art, 6. International Conference on Mass Customization and Personalization in Central Europe MCP-CE, Novi Sad: Faculty of Technical Sciences, 24-26 September, 2014, pp. 204-211, ISBN 978-86-626-6 Anišić Z., Firstner (Fürstner) I., Orčik A., Nađ A.: iDEA LAB Platform for Student Innovation Contest - FIirst Results in the Application, 6. International Conference on Mass Customization and Personalization in Central Europe MCP-CE, Novi Sad: FTN, Novi Sad, 24-26 September, 2014, pp. 8-13, ISBN 978-86-626-6 Orčik A., Anišić Z.: Co-creation: How, When, Where and Who?, 6. International Conference on Mass Customization and Personalization in Central Europe MCP-CE, Novi Sad: FTN, Novi Sad, 24-26 September, 2014, pp. 146-151, ISBN 978-86-626-6 Orčik A., Tekić Ž., Borocki J., Anišić Z.: Unused Potential of Co-Creation in South-East Europe: Is it about the Culture?, 7. International Conference for Entrepreneurship, Innovation and Regional Development - ICEIRD, Nicosia: University of Cyprus, Cyprus, 5-6 June, 2014, pp. 13-21, ISBN 978-9963-7355-4-9 Anišić Z., Firstner (Fürstner) I., Orčik A., Nađ A.: Some results in implementation of iDEA Lab Co-Creation platform, 16. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: FTN, Novi Sad, 15-17 October, 2014, pp. 303-308, ISBN 978 - 86 - 7892 - 65 Sremčev N., Ćosić I., Anišić Z., Lazarević M., Veža I.: Algorithm for Product Configurator Development on the Principles of Group Technology, 19. International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" - TMT, Barcelona: Faculty of Mechanical Engineering in Zenica, Escola Tecnica Superior D'Enginyeria Industrial de Barcelona - Universitat Politecnica de Catalunya, Spain, 22-23 July, 2015, pp. 133-136, ISBN ISSN 1840-4944 Anišić Z., Fuerstner I., Nađ A., Sremčev N.: Increasing Innovation Potential of SMEs through Coworking and Crowdsourcing with Students, 8. International Conference for Entrepreneurship, Innovation and Regional Development - ICEIRD, Sheffield: The University of Sheffield, 18-19 June, 2015, pp. 737-746, ISBN 978-0-9932801-0-8, UDK: ISSN 2411-5320 Dragan D., Mihić S., Anišić Z., Luković I.: Role of background subtraction in creating human body point clouds from photos, 6. International Conference and Exhibition on 3D Body Scanning Technologies, Lugano, 27-28 October, 2015, pp. 210-217, ISBN 978-3-033-05270-3 Medić N., Anišić Z.: Multi-Criteria Decision-Making for Optimization of Energy Efficiency Measures in Buildings, 42. SYM-OP-IS Simpozijum o operacionim istraživanjima, Srebrno jezero: Matematički Institut SANU, 15-18 September, 2015, pp. 148-151, ISBN 978-86-80593-55-5 Suzić N., Forza C., Anišić Z., Trentin A.: Mass Customization Implementation Methodologies – A Literature Review, 22. EurOMA Conference, Neuchatel: EurOMA, University of Neuchâtel, 26-1 June, 2015, ISBN 978-2-9700901-2-0 Anišić Z.: Prototyping a Career Center Online Internship- and Job-offer Module, 13. IEEE International Symposium on Intelligent Systems and Informatics (SISY), Subotica, 17-19 September, 2015, pp. 89-94 Sremčev N., Ćosić I., Anišić Z., Lazarević M., Gechevska V.: Procedure phases for configuration system development, 26. DAAAM International Symposium, Zadar: Danube Adria Association for Automation and Manufacturing, DAAAM, 21-24 October, 2015, pp. 478-482, ISBN 978-390273407-5, UDK: ISSN: 17269679 Firstner (Fürstner) I., Nadj A., Anišić Z., Gogolak L.: Prototyping a career center online internship-and job-offer module, 13. IEEE International Symposium on Intelligent Systems and Informatics (SISY), Subotica: IEEE Hungary Section, 17-19 September, 2015, pp. 89-94, ISBN 978-1-4673-9388-1 Koldžin D., Medić V., Anišić Z.: Support of International Cooperation as a Specific Policy Instrument for Improvement of Innovation Environment in AP Vojvodina, 7. International Conference on Mass Customization and Personalization in Central Europe MCP-CE, Novi Sad: Univerzitet u Novom Sadu, Fakultet tehničkih nauka, 21-23 September, 2016, pp. 129-132, ISBN 978-86-7892-84-44 Anišić Z., Firstner (Fürstner) I., Nađ A., Sremčev N., Gogolak L.: Development of Improved Weel Hub Prototype Through Idealab Platform for Students's Contest, 9. The 9th International Symposium - KOD 2016 - Machine and Industrial Design in Mechanical Engineering, Balatonfured: Univerzitet u Novom Sadu, Fakultet tehničkih nauka, 9-12 June, 2016, pp. 23-28, ISBN 978-86-7892-821-5 Suzić N., Cipriano F., Trentin A., Anišić Z.: The State of the Art of the Research in Mass Customization Implementation Guidelines, 7. International Conference on Mass Customization and Personalization in Central Europe MCP-CE, Novi Sad: Iniverzitet u Novom Sadu, Fakultet tehničkih nauka, 21-23 September, 2016, pp. 226-235, ISBN 978-86-7892-84-44 Firstner (Fürstner) I., Anišić Z., Gogolak L., Čović Z., Pinter R., Pot M.: iDEAlab at Subotica Tech - student projects, 1. Regional Conference on Entrepreneurship and Open Innovation in University - Industry Collaboration - iDEAlab, Novi Sad: Faculty of Technical Sciences, 21-23 September, 2016, pp. 13-22, ISBN 978-86-7892-877-2 Lalić B., Anišić Z., Medić N., Tasić N., Marjanović U.: The Impact of Organizational Innovation Concepts on New Products and Related Services, 24. International Conference on Production Research - ICPR, Poznan: DEStech Publications, Inc., 30-3 July, 2017, pp. 110-115, ISBN 978-1-60595-507-0 Medić N., Anišić Z.: Multi-Criteria Decision Making Methods: Comparative Analysis of PROMETHEE and VIKOR, 17. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, Department for Industrial Engineering and Management, 4-6 October, 2017, pp. 284-287, ISBN 978-86-7892-978-6 Gajić D., Vezilić B., Dragan D., Petrović V., Mihić S., Anišić Z., Puhalac V.: "Binary Classification of Images for Applications in Intelligent 3D Scanning", Intelligent Distributed Computing XI, 11. International Symposium on Intelligent Distributed Computing (IDC), Beograd: Springer, 11-13 October, 2017, pp. 199-209 Medić N., Anišić Z., Tešić S.: Survey of some Key Concepts of Industry 4.0 in Manufacturing Companies from Developing Country, 4. Regional Conference - Mechatronics in Practice and Education (MECHEDU), Subotica: Subotica Tech – College of Applied Sciences, 4-5 May, 2017, pp. 107-111, ISBN 978-86-918815-2-8 Medić N., Marjanović U., Zivlak N., Anišić Z., Lalić B.: Hybrid Fuzzy MCDM Method for Selection of Organizational Innovations in Manufacturing Companies, 1. IEEE International Symposium on Innovation and Entrepreneurship (TEMS-ISIE), Peking, 30-1 March, 2018, pp. 83-90, ISBN 978-1-5386-4475-1 Medić N., Anišić Z.: Multi-Criteria Decision Making Methods: Does Approach Matter?, 13. Balkan Conference on Operational Research - BALCOR, Beograd: The Mathematical Institute of the Serbian Academy of Sciences and Arts (SANU), 25-28 May, 2018, pp. 220-226, ISBN 978-86-80593-64-7 Dragan D., Anišić Z., Mihić S., Puhalac V.: 3D Avatar Platforms: Tomorrow’s Gateways for Digitized Persons into Virtual Worlds, 9. World Mass Customization & Personalization Conference (MCPC), Aachen: Springer, 20-21 November, 2017, pp. 141-156 Čeliković M., Batalo B., Radisavljević D., Dragan D., Anišić Z.: 3D Avatar Platform - A Unique Configurator for 3D Figurine Customization, 8. International Conference on Mass Customization and Personalization - MCPC, Novi Sad: Graphic Center GRID, FTN, 19-21 September, 2018, pp. 61-65, ISBN 978-86-6022-080-8 Dragan D., Gajić D., Petrović V., Lazor M., Anišić Z.: State of the Art in Virtual Reality Shops, 8. International Conference on Mass Customization and Personalization - MCPC, Novi Sad: Graphic Center GRID, FTN, 19-21 September, 2018, pp. 74-80, ISBN 978-86-6022-055-6 Medić N., Anišić Z., Marjanović U., Tasić N., Lalić B.: Evaluation of Main Sources of Ideas for Innovation in Manufacturing Companies Using PROMETHEE Method , 25. IJCIEOM - International Joint Conference on Industrial Engineering and Operations Management, Novi Sad: Springer, 15-17 July, 2019, pp. 388-395, ISBN 978-3-030-43615-5 Medić N., Anišić Z., Tasić N., Zivlak N., Lalić B.: Technology Adoption in the Industry 4.0 Era: Empirical Evidence from Manufacturing Companies, 25. Advances in Production Management Systems (APMS), Novi Sad: Springer Nature Switzerland AG, 30-3 August, 2020, pp. 115-122, ISBN 978-3-030-57992-0 Shafiee S., Savić M., Anišić Z.: Comparing the Product Configuration Benefits in Engineering and Quotation Phases, 9. International Conference on Mass Customization and Personalization in Central Europe MCP-CE, Novi Sad: Fakultet tehničkih nauka u Novom Sadu, 23-25 September, 2020, pp. 207-211, ISBN 978-86-6022-285-7, UDK: 005:001.895(4)(082) Medić N., Anišić Z.: Comparison of multi-criteria decision-making methods: Is it all the same?, 10. Conference on Social and Technological Development “STED 2021, Trebinje: University PIM, Banja Luka, Republic of Srpska, B&H, 2021, pp. 232-240, ISBN 978-99955-40-55-5 Anišić Z., Medić N.: Educational Knowledge Gaps in the Context of Industry 4.0: Academics’ and Companies’ Perspective, 10. International Scientific Conference Research and development of mechanical elements and systems - IRMES, Beograd: University of Belgrade, Faculty of Mechanical Engineering, 26 May, 2022, pp. 82-90, ISBN 978-86-6060-119-5 Popović Lj., Anišić Z., Vranić (Novaković) T.: An Overview of Digitalization and Personalization in Insurance with a Focus on Life Insurance, 10. International Conference on Mass Customization and Personalization in Central Europe MCP-CE, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, Department of Industrial Engineering and Management, 21-23 September, 2022, pp. 124-129, ISBN 978-86-6022-463-9 Medić N., Anišić Z.: Comparison of MCDM Methods: The Focus on Algorithms, 8. International Symposium on Industrial Engineering (SIE), Beograd: Faculty of Mechanical Engineering, University of Belgrade, 29-30 September, 2022, pp. 228-231, ISBN 978-86-6060-131-7 Sandrin E., Forza C., Suzić N., Leitner G., Gasparella A., Anišić Z., Suzić S., Trentin A.: Mass Customization 4.0 - Insights from specific angles, 10. International Conference on Mass Customization and Personalization in Central Europe MCP-CE, Novi Sad: Fakultet tehničkih nauka u Novom Sadu, 21-23 September, 2022, pp. 147-153, ISBN 978-86-6022-463-9 Todorović T., Medić N., Anišić Z., Tasić N., Ćirić Lalić D., Lalić B.: Industry 4.0 Enablers: Implementation of Organizational Concepts as a Support for Technological Improvements of Manufacturing Companies, 18. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Springer, 7-9 October, 2020, pp. 170-175, ISBN 978-3-030-97946-1 Medić N., Anišić Z.: Decision Support Systems in Manufacturing: A Bibliometric Analysis, 12. International conference on social and technological development - STED 2023, Trebinje: University PIM, Banja Luka, Republic of Srpska, Bosnia and Herzegovina, 2023, pp. 157-162, ISBN 978-99955-40-70-8 Anišić Z., Demko-Rihter J., Pantelić M.: Some Results in the Application of the Principles of Circular Economy in the Production of Cardboard Packaging, 12. International conference on social and technological development - STED 2023, Trebinje: University of PIM, Banja Luka, R.Srpska, 2023, pp. 101-106, ISBN 978-99955-40-70-8 Demko-Rihter J., Sassanelli C., Pantelić M., Anišić Z.: Challenges in the transition process to the circular economy: a point of view of a packaging company, 19. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: University of Novi Sad, Faculty of technical sciences, 5-6 October, 2023, ISBN 978-86-6022-623-7 Anišić Z., Medić N., Digiesi S., Mossa G., Mummolo G.: Analysis of Knowledge Gap in Study Programs: A Strategy for Successful Implementation of Industry 4.0, 19. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Faculty of Technical Sciences, 5-6 October, 2023, pp. 291-298, ISBN 978-86-6022-623-7 Miletić J., Anišić Z.: Personalizing Fashion in the Metaverse: The Role of NFTs in Transforming Digital Consumer Experiences, 11. International Conference on Mass Customization and Personalization in Central Europe MCP-CE, Novi Sad: Fakultet tehničkih nauka u Novom Sadu, 24-27 September, 2024, pp. 177-183, ISBN 978-86-6022-686, UDK: 005:001.895(4)(082); 005.591.6(4)(082) Anišić Z., Sassanelli C.: Aligning Mass Customization With Circular Economy, 11. International Conference on Mass Customization and Personalization in Central Europe MCP-CE, Novi Sad: Fakultet tehničkih nauka u Novom Sadu, 24-27 September, 2024, pp. 15-22, ISBN 978-86-6022-686, UDK: 005:001.895(4)(082); 005.591.6(4)(082) Peić Tukuljac E., Anišić Z.: VETSOL - Energy Island in Traffic, 1. International Scientific and Professional Conference - ALFATECH – Smart cities and modern technologies, Beograd, 15 March, 2024, pp. 202-206, ISBN 978-86-6461-074-2, UDK: 711.45:004.7]:656 656.1:502.131.1 Anišić Z., Peić Tukuljac E.: Smart Solutions for Smart Cities - VETSOL, 1. Future-BME Conference, Novi Sad: Fakultet tehničkih nauka u Novom Sadu, 30-31 October, 2024 Anišić Z., Peić Tukuljac E.: Development of an Electronic Tool (ESAL – Electronic Shaft Adjuster and Locker) for Direct Injection Pumps, 15. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Fakultet tehničkih nauka u Novom Sadu, 24-26 September, 2024, pp. 47-50, ISBN 978-86-6022-681-7, UDK: 621.7/.9(082) 621.9(082)	128	128.00
M36	Uređivanje zbornika saopštenja međunarodnog naučnog skupa Uređivanje zbornika saopštenja međunarodnog naučnog skupa Anišić Z., Freund R.: Proceedings of the 3rd International Conference on Mass Customization and Personalization in Central Europe MCP-CE 2008, 3. International Conference on Mass Customization and Personalization in Central Europe MCP-CE, Palić: Fakultet tehničkih nauka u Novom Sadu, 3-6 June, 2008, ISBN 978-86-7892-114-8, UDK: 005:001.895(4-11); 005.591.6(4-11) Anišić Z.: Proceedings of the 3rd Internationa Conference on Entreprenurship, Innovation and Regional Development ICEIRD 2010, 3. International Conference for Entrepreneurship, Innovation and Regional Development - ICEIRD, Novi Sad: Fakultet tehničkih nauka, 27-29 May, 2010, ISBN 978-86-7892-250-3 Anišić Z., Freund R.: Proceedings of the 4th International Conference on Mass Customization and Personalization in Central Europe - MCP-CE 2010, 4. International Conference on Mass Customization and Personalization in Central Europe MCP-CE, Novi Sad: Fakultet tehničkih nauka, 23-24 September, 2010, ISBN 978-86-7892-277-0 Anišić Z., Stankovski S.: Proceedings of the 1st Regional Conference - Mechatronics in Practice and Education MECH-CONF, 1. Regional Conference - Mechatronics in Practice and Education (MECHEDU), Subotica: Visoka tehnička škola strukovnih studija u Subotici, 8-10 December, 2011, ISBN 978-86-85409-67-7, UDK: 007.5 (082) Anišić Z., Freund R.: Proceedings of the 5th International Conference on Mass Customization and Personalization in Central Europe MCP-CE 2012, 5. International Conference on Mass Customization and Personalization in Central Europe MCP-CE, Novi Sad: Fakultet tehničkih nauka Novi Sad, 19-21 September, 2012, ISBN 978-86-7892-432-3, UDK: 005:001.895(4-191.2)(082) Anišić Z., Forza C.: Proceedings of the 6th International Conference on Mass Customization and Personalization in Central Europe MCP-CE 2014, 6. International Conference on Mass Customization and Personalization in Central Europe MCP-CE, Novi Sad: FTN, Novi Sad, 24-26 September, 2014, pp. 1-234, ISBN 978-86-7892-626-6, UDK: 005;001.895(4-191.2)(082) Anišić Z.: Proceedings of the 7th International Conference on Mass Customization and Personalization in Central Europe MCP-CE 2016, 7. International Conference on Mass Customization and Personalization in Central Europe MCP-CE, Novi Sad, 21-23 September, 2016, pp. 1-276, ISBN 978-86-7892-84-44, UDK: 005:001.895(4-191.2)(082) Anišić Z.: Proceedings of the 8th International Conference on Mass Customization and Personalization in Central Europe MCP-CE 2018, 8. International Conference on Mass Customization and Personalization - MCPC, Novi Sad: Fakultet tehničkih nauka u Novom Sadu, 19-21 September, 2018, pp. 1-343, ISBN 978-86-6022-080-8, UDK: 005:001:895(4)(082) Anišić Z.: Proceedings on 25th International Joint Conference on Industrial Engineering and Operations Management- IJCIEOM - THE NEXT GENERATION OF PRODUCTION AND SERVICE SYSTEMS, 25. IJCIEOM - International Joint Conference on Industrial Engineering and Operations Management, Novi Sad: Springer Nature Switzerland AG 2020, 15-17 July, 2019, ISBN 978-3-030-43616-2 Anišić Z.: Proceedings of the 9th International Conference on Mass Customization and Personalization in Central Europe MCP-CE 2020, 9. International Conference on Mass Customization and Personalization in Central Europe MCP-CE, Novi Sad: Fakultet tehničkih nauka u Novom Sadu, 23-25 September, 2020, pp. 1-256, ISBN 978-86-6022-285-7, UDK: 005:001:895(4)(082) Anišić Z.: Proceedings of the 10th International Conference on Mass Customization and Personalization - Community of Europe, MCP-CE 2022, 10. International Conference on Mass Customization and Personalization in Central Europe MCP-CE, Novi Sad: Fakultet tehničkih nauka u Novom Sadu, 21-23 September, 2022, pp. 1-224, ISBN 978-86-6022-463-9	11	11.00
M44	Poglavlje u knjizi M41 ili rad u istaknutom tematskom zborniku vodećeg nacionalnog značaja Poglavlje u knjizi M41 ili rad u istaknutom tematskom zborniku vodećeg nacionalnog značaja Gečevska V., Anišić Z., Čuš F., Buchmeister B.: Knowledge Management Based Process Planning System, Innovative Production Systems - Key to Future Intelligent Manufacturing, Maribor, University of Maribor, Faculty of Mechanical Engineering, Faculty of Mechanical Engineering Skopje, 2010, str. 177-192, ISBN 978-961-248-250-3 Gečevska V., Lombardi F., Čuš F., Anišić Z., Angelidis D., Veza I., Vasilevska S., Ćosić P.: PLM – Product Lifeycle Management Strategy for Innovative and Competitive Business Environment, Maribor, University of Maribor, Faculty of Mechanical Engineering, Faculty of Mechanical Engineering Skopje, 2010, str. 193-208, ISBN 978-961-248-250-3 Firstner (Fürstner) I., Anišić Z.: Adaptive Involvement of Customers as Co-Creators in Mass Customization, Products and Services; from R&D to Final Solutions, Chapter 10, Rijeka, Sciyo, 2010, str. 179-198, ISBN 978-953-307-211-1	3	6.00
M45	Poglavlje u knjizi M42 ili rad u tematskom zborniku nacionalnog značaja Poglavlje u knjizi M42 ili rad u tematskom zborniku nacionalnog značaja Suzić N., Anišić Z., Ćosić I.: Reconfiguring Production and Organizational Structures for Mass Customization in Furniture Industry; Chapter 20 of Innovative Production Systems Key to Future Inteligent Manufacturing; Scientific Monography, Maribor, University of Maribor, Faculty of Mechanical Engineeing, Maribor; Faculty of Mechanical Engineering, Skopje, 2010, str. 257-275, ISBN 978-961-248-250-3 Anišić Z.: Funkcionalni zahtevi i QFD analiza, Novi Sad, Fakultet tehničkih nauka u Novom Sadu, 2013, str. 125-156, ISBN 978-86-7892-509-2 Anišić Z.: Projektovanje za izvrsnost - DFX (Design for Excellence), Novi Sad, Fakultet tehničkih nauka u Novom Sad, 2013, str. 157-190, ISBN 978-86-7892-509-2	3	4.50
M51	Rad u vodećem časopisu nacionalnog značaja Rad u vodećem časopisu nacionalnog značaja Anišić Z.: Uređivanje specijalnog broja časopisa - International Journal of Industrial Engineering and Management, International Journal of Industrial Engineering and Management, 2010, Vol. 1, No. 3, ISSN 2217-2661 Firstner (Fürstner) I., Anišić Z.: Methodology Concept of Customer Profile Definition, International Journal of Industrial Engineering and Management, 2010, Vol. 1, No. 3, pp. 121-129, ISSN 2217-2661 Anišić Z., Firstner (Fürstner) I., Nađ A., Medić N., Retfalvi A.: Improved 3D Printed Prototype of Weel Hub as a Result of Student's Creative Work Through the Idealab Platform, Machine Design, 2016, Vol. 8, No. 3, pp. 97-102, ISSN 1821-1259 Suzić N., Sandrin E., Suzić S., Forza C., Trentin A., Anišić Z.: Implementation Guidelines for Mass Customization: A Researcher-Oriented View, International Journal of Industrial Engineering and Management, 2018, Vol. 9, No. 4, pp. 229-243, ISSN 2217-2661	4	8.00
M52	Rad u časopisu nacionalnog značaja Rad u časopisu nacionalnog značaja Anišić Z.: Uređivanje specijalnog broja časopisa - International Journal of Industrial Engineering and Management, International Journal of Industrial Engineering and Management, 2014, Vol. 5, No. 4, ISSN 2217-2661	1	1.50
M53	Rad u naučnom časopisu Rad u naučnom časopisu Anišić Z., Ćosić I.: IIS-DFA metodologija za povišenje pogodnosti proizvoda za montažu , Konstruisanje mašina / Journal of Mechanical Engineering Design, 2002, Vol. 5, No. 1, pp. 1-11, ISSN 1450-5401, UDK: 62-1/8 Lalić B., Ćosić I., Anišić Z.: Simulation Based Design and Reconfiguration of Production Systems , International Journal of Simulation Modelling, 2005, Vol. 4, No. 4, pp. 173-183, ISSN 1726-4529 Anišić Z., Ćosić I.: Assembly Initiated Production as a Prerequisite for Mass Customization and Effective Manufacturing, Proceedings of the Faculty of Mechanical Engineering, 2005, Vol. 24, No. 1, pp. 33-46, ISSN 0351-6067, UDK: 621 Firstner (Fürstner) I., Anišić Z.: Design for Environment as a Part of the IPS-DFX Methodology for Integrated Product Development, Annals of Faculty Engineering Hunedoara - International Journal of Engineering, 2005, Vol. 3, No. 2, pp. 117-124, ISSN 1584-2665 Anišić Z.: Some Results of the Implementation of the MC Concept in Small Companies, Annals of Faculty Engineering Hunedoara - International Journal of Engineering, 2006, Vol. 4, No. 2, pp. 127-136, ISSN 1584-2665 Gečevska V., Anišić Z.: Using of Activity Based Costing (ABC) in Small and Medium Companies , Annals of Faculty Engineering Hunedoara - International Journal of Engineering, 2006, Vol. 4, No. 2, pp. 141-150, ISSN 1584-2665 Anišić Z., Gečevska V.: Product Configurators as a Tool for Increasing Competitivness of Small and Medium Enterprises, Mechanical Engineering, 2007, Vol. 26, No. 1, pp. 25-32, ISSN 1857-5293, UDK: 621 Anišić Z., Tudjarov B., Tsigkas A., Chattzopoulos C., Freund R.: Some Results of Mapping of Mass Customization Activities in SE Europe, Annals of Faculty Engineering Hunedoara - International Journal of Engineering, 2009, Vol. 7, No. 4, pp. 151-156, ISSN 1584-2665 Gečevska V., Anišić Z.: Technology Transfer and Clusters - Opportunity for Regional Development, Annals of Faculty Engineering Hunedoara - International Journal of Engineering, 2009, Vol. 7, No. 2, pp. 177-182, ISSN 1584-2665 Firstner (Fürstner) I., Anišić Z.: Intelligent Product Configurator - The New Approach in Thermo Insulation of Buildings, Annals of Faculty Engineering Hunedoara - International Journal of Engineering, 2009, Vol. 7, No. 2, pp. 165-170, ISSN 1584-2665 Firstner (Fürstner) I., Anišić Z., Ćosić I.: Overview of the Current Research Results of Mass Customization, Advances in Production Engineering and Management, 2009, Vol. 4, No. 1, pp. 47-58, ISSN 1854-6250 Gečevska V., Buchmeister B., Anišić Z., Lalić B.: Product Lifecycle Management with Knowledge Management as a Strategic Approach for Innovative Enterprise Environment, Annals of Faculty Engineering Hunedoara - International Journal of Engineering, 2010, Vol. 8, No. 2, pp. 207-212, ISSN 1584-2665 Gečevska V., Chiabert P., Anišić Z., Lombardi F., Cus F.: Product Lifecycle Management Through Innovative and Competitive Business Environment, Journal of Industrial Engineering and Management, 2010, Vol. 3, No. 2, pp. 323-336, ISSN 2013-8423 Orčik A., Anišić Z., Gečevska V., Veža I.: PLM as Framework for New Product Development, Annals of Faculty Engineering Hunedoara - International Journal of Engineering, 2012, Vol. 10, No. 3, pp. 373-378, ISSN 1584-2665 Anišić Z.: Uređivanje specijalnog broja časopisa - International Journal of Industrial Engineering and Management, International Journal of Industrial Engineering and Management, 2012, Vol. 3, No. 4, ISSN 2217-2661 Gečevska V., Veža I., Čuš F., Anišić Z., Stefanić N.: Lean PLM - Information Technology Strategy for Innovative and Sustainable Business Environment, International Journal of Industrial Engineering and Management, 2012, Vol. 3, No. 1, pp. 15-23, ISSN 2217-2661 Gečevska V., Anišić Z., Stojanova V.: Lean Product Lifecycle Management Approach , International Journal of Industrial Engineering and Management, 2013, pp. 207-214, ISSN 2217-2661 Orčik A., Tekić Ž., Anišić Z.: Customer Co-Creation throughout the Product Life Cycle, International Journal of Industrial Engineering and Management, 2013, Vol. 4, No. 1, pp. 43-49, ISSN 2217-2661, UDK: 658.62:001.895 Anišić Z., Koldžin D., Freund R.: How to Support Open Innovations Trough Public Policies, Annals of Faculty Engineering Hunedoara - International Journal of Engineering, 2013, Vol. 11, No. 2, pp. 241-247, ISSN 1584-2665 Stojanova T., Gečevska V., Anišić Z., Mancev D.: Implementation of Mass Customization Strategy for Indvidualized Products, Annals of Faculty Engineering Hunedoara - International Journal of Engineering, 2013, Vol. 11, No. 1, pp. 227-232, ISSN 1584-2665 Anišić Z., Kolundžić M.: Product Designing Aimed at Environment Preservation and Sustainable Development, CAx Technologies, 2013, Vol. 1, No. 1, pp. 11-18, ISSN 1314-9628 Anišić Z.: Uređivanje specijalnog broja časopisa - International Journal of Industrial Engineering and Management, International Journal of Industrial Engineering and Management, 2016, Vol. 7, No. 4, ISSN 2217-2661 Miljub A., Dragan D., Mihić S., Anišić Z.: Review of 3D body scanning systems, Acta Technica Corviniensis, 2017, Vol. 10, No. 1, pp. 17-24, ISSN 2067-3809 Berdić N., Dragan D., Mihić S., Anišić Z.: Creation and usage of 3D full body avatars, Annals of Faculty Engineering Hunedoara - International Journal of Engineering, 2017, Vol. 15, No. 1, pp. 29-34, ISSN 1584-2665	24	24.00
M61	Predavanje po pozivu sa skupa nacionalnog značaja štampano u celini Predavanje po pozivu sa skupa nacionalnog značaja štampano u celini Ćosić I., Anišić Z.: Projektovanje proizvoda orjentisanog ka poslovnom procesu - DFX , 27. Međunarodno savetovanje proizvodnog mašinstva Jugoslavije, Niš: Mašinski fakultet Niš, 23-25 Septembar, 1998, pp. 15-21	1	1.50
M63	Saopštenje sa skupa nacionalnog značaja štampano u celini Saopštenje sa skupa nacionalnog značaja štampano u celini Maksimović A., Anišić Z.: NEKI REZULTATI U PRIMENI FLEKSIBILNIH MONTAŽNIH SISTEMA , 9. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: FTN, Novi Sad, 28-29 Jun, 1993, pp. 44-47 Ćosić I., Živković B., Anišić Z.: Razvoj strukture efektivnog ekspertnog sistema za projektovanje montažnih sistema , 9. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad, 28-29 Jun, 1993, pp. 48-51 Ćosić I., Anišić Z., Radlovački V.: Izbor varijante montažnog sistema primenom metode tehnoekonomske optimizacije, 21. SYM-OP-IS Simpozijum o operacionim istraživanjima, Kotor, 4-7 Oktobar, 1994, pp. 596-599 Ćosić I., Anišić Z., Maksimović A.: Neki efekti primene fleksibilnog koncepta u procesima montaže, 25. Savetovanje proizvodnog mašinstva Jugoslavije sa međunarodnim učešćem, Beograd, 1-2 Septembar, 1994, pp. 709-716 ***Ćosić I., Govedarica M., Živković B., Anišić Z.: Primena “cad” tehnologija u projektovanju montažnih sistema- Nije povezan skup**greska** Anišić Z., Maksimović A., Simić M., Ćosić I.: RAZVOJ AUTOMATIZOVANIH FLEKSIBILNIH MONTAŽNIH SISTEMA, 5. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad, 8-9 Jun, 1994, pp. 23-28 Anišić Z., Radlovački V., Ćosić I., Todić V.: OCENA NIVOA FLEKSIBILNOSTI I PRODUKTIVNOSTI MONTAŽNIH SISTEMA METODOM SIMULACIJE Naziv skupa: 20. JUPITER konferencija , 20. JUPITER konferencija, Beograd, 28-30 Septembar, 1994, pp. 109-114 Ćosić I., Anišić Z., Radlovački V.: Razvoj opšteg modela za simulaciju fleksibilnih montažnih sistema, 22. SYM-OP-IS Simpozijum o operacionim istraživanjima, Donji Milanovac, 3-7 Oktobar, 1995, pp. 708-711 Maksimović A., Anišić Z., Simić M.: SOCIOTEHNIČKI ASPEKTI UVOĐENJA GRUPNE TEHNOLOGIJE , 10. Naučna konferencija "Industrijski sistemi", Novi Sad, 1-3 Oktobar, 1996, pp. 77-82 Ćosić I., Anišić Z.: Istraživanje uslova za povišenje fleksibilnosti montažnih sistema, 26. Međunarodno savjetovanje proizvodnog mašinstva Jugoslavije, Podgorica, 1 Septembar, 1996, pp. 427-436 Ćosić I., Anišić Z.: Statističke metode u procesu planiranja montaže, 1. Industrijsko inženjerstvo, Beograd, 7-9 Novembar, 1996, pp. 431-436 Ćosić I., Anišić Z., Maksimović A.: Prilog razvoju postupaka za dinamičko modeliranje i tehnoekonomsku optimizaciju montažnih sistema, 10. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad, 1-3 Oktobar, 1996, pp. 83-90 Ćosić I., Maksimović A., Anišić Z., Simić M.: Sociotehnički aspekti uvođenja grupne tehnologije, 10. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad, 1-3 Oktobar, 1996, pp. 77-82 Ćosić I., Miletić Lj., Anišić Z.: Ergonomski principi u oblikovanju radnih mesta u montaži, 1. Industrijsko inženjerstvo, Beograd, 7-9 Novembar, 1996, pp. 379-381 Ćosić I., Anišić Z.: Simulacija kao podloga za objektivniji izbor optimalne varijante montažnog sistema, 6. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad, 1 Jun, 1997, pp. 249-254 Ćosić I., Anišić Z., Firstner (Fürstner) I.: DFX platforma u integralnom razvoju proizvoda (DFX platform in integrated product development), 11. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: Fakultet tehničkih nauka, 28 Oktobar, 1999, pp. 19-25 Ćosić I., Anišić Z., Firstner (Fürstner) I.: Prilog razvoju DFX alata u CAD okruženju (Contribution to the development of DFX tool in CAD environment), 1. Simpozijum o konstruisanju, oblikovanju i dizajnu - KOD, Novi Sad, 2000, pp. 59-62 Ćosić I., Anišić Z., Firstner (Fürstner) I.: IIS-DFA softver za analizu pogodnosti proizvoda za montažu kao deo integralnog razvoja proizvoda (IIS-DFA software for analysis and betterment of the products convenience for assembling as a part of the integral product developmnent) , 26. JUPITER konferencija, Beograd: Tehnološko metalurški fakultet Univerziteta u Beogradu, 1 Februar, 2000, pp. 3-2, ISBN 86-7083-369-7 Anišić Z., Ćosić I.: DFA kao podloga za izbor optimalne varijante montažnog sistema, 7. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad, 8 Jun, 2000, pp. 249-254 Anišić Z., Ćosić I.: METODOLOGIJA ZA OCENU I POVIŠENJE POGODNOSTI PROIZVODNOG PROGRAMA ZA MONTAŽU, 28. Savetovanje proizvodnog mašinstva Jugoslavije sa međunarodnim učešćem, Kraljevo, 28-29 Septembar, 2000, pp. 7-8 Ćosić I., Anišić Z.: Funkcionalna analiza kao alat za povišenje pogodnosti proizvoda za montažu, 4. DEMI, Banja Luka, 25-26 April, 2001, pp. 152-154 Ćosić I., Anišić Z.: Analiza uticaja načina montaže na složenost izrade univerzalnih zupčastih reduktora, 5. Međunarodno savetovanje o dostignućima elektro i mašinske industrije - DEMI, Banja Luka, 25-26 April, 2002 Ćosić I., Kuzmanović S., Anišić Z.: Analiza savremenih rešenja univerzalnih zupčastih motornih reduktora sa stanovišta montaže, 28. JUPITER konferencija, Beograd, 1 Februar, 2002, pp. 4-4 Ćosić I., Anišić Z.: Neki rezultati u primeni postupaka za povišenje pogodnosti proizvoda za montažu, 2. Simpozijum o konstruisanju, oblikovanju i dizajnu - KOD, Novi Kneževac: Fakultet tehničkih nauka, 22 Maj, 2002, pp. 42-46 Ćosić I., Anišić Z.: Integralni razvoj proizvoda i pogodnost proizvoda za montažu, 29. Savetovanje proizvodnog mašinstva Jugoslavije sa međunarodnim učešćem, Beograd, 1-2 Septembar, 2002 Ćosić I., Anišić Z., Lalić B.: Modularnost kao ključni koncept u projektovanju za životni ciklus proizvoda, 6. Međunarodni naučno-stručni skup o dostignućima elektrotehnike, mašinstva i informatike - DEMI, Banja Luka, 30-31 Maj, 2003, pp. 193-200 Ćosić I., Anišić Z., Firstner (Fürstner) I.: Design for Environment in IPS-DFX Methodology for Integrated Product Development as a part of Concurrent Engineering, 1. Serbian-Hungarian Joint Symposium on Intelligent System, Subotica, 19-20 Septembar, 2003, pp. 101-112, ISBN 9637154191 Ćosić I., Anišić Z., Lalić B.: Efektivna proizvodnja prema individualnim zahtevima kupaca, 8. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad, 26 Jun, 2003, pp. 81-83 Ćosić I., Anišić Z., Firstner (Fürstner) I.: Integrisanje DFE alata u IPS-DFX metodologiju za integralni razvoj proizvoda (Design for Environment in IPS-DFX Methodology for Integrated Product Development as a Part of Concurrent Engineering) , 3. Simpozijum o konstruisanju, oblikovanju i dizajnu – KOD, Novi Sad, 19 Maj, 2004, pp. 21-26 Lazarević M., Ćosić I., Anišić Z.: Uticaj izbora strategija za upravljanje proizvodima na kraju životnog ciklusa na strukturu proizvodnog sistema, 13. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Herceg Novi: Fakultet tehničkih nauka, 7-9 Septembar, 2005, pp. 83-91, ISBN 86-7780-008-5 Ćosić I., Anišić Z., Lazarević M.: Demontaža kao deo strategije za upravljanje proizvodima na kraju životnog ciklusa , 30. Savetovanje proizvodnog mašinstva Srbije i Crne Gore sa međunarodnim učešćem, Čačak, 1-3 Septembar, 2005 Lazarević M., Ćosić I., Anišić Z.: Uticaj izbora strategije upravljanja proizvodom na kraju životnog ciklusa na strukturu proizvodnog sistema , 13. Industrijski sistemi, Herceg Novi, 7-9 Septembar, 2005, pp. 83-92, ISBN 86-7780-008-5, UDK: 658.5(082) Anišić Z.: Neki rezultati u praktičnoj realizaciji mass customization strategije , 13. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Herceg Novi: Fakultet tehničkih nauka, 7-9 Septembar, 2005, pp. 157-166, ISBN 86-7780-008-5, UDK: 658.5(082) Anišić Z.: Konfiguratori proizvoda kao podrška mass customization strategiji , 4. Simpozijum o konstruisanju, oblikovanju i dizajnu - KOD, Palić: Fakultet tehničkih nauka, 30-31 Maj, 2006, pp. 11-16, ISBN 86-85211-92-1 Anišić Z.: Mass Customization - Trend koji osvaja i naše tržište , 8. E-TRGOVINA međunarodni simpozijum o elektronskoj trgovini i elektronskom poslovanju, Palić: Agencija E-trgovina, 16-18 April, 2008, ISBN 978-86-910039-0-6 Firstner (Fürstner) I., Anišić Z., Ćosić I.: Mass Customization: Trends, Research and Application, 14. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: FTN Novi Sad, 2-3 Oktobar, 2008, pp. 493-498, ISBN 978-86-7892-135-3, UDK: 685.(082) Kovačević I., Ćosić I., Lalić B., Anišić Z.: Strukovne doktorke studije - DPM, DBA, 15. Skup "Trendovi razvoja" - TREND, Kopaonik: Fakultet tehničkih nauka, 2-5 Mart, 2009, ISBN 978-86-7892-236-7 Ćosić I., Kovačević I., Katić V., Anišić Z., Hodolič J.: Struktura i pravila doktorskih studija na Fakultetu tehničkih nauka u Novom Sadu , 15. Skup "Trendovi razvoja" - TREND, Kopaonik: Fakultet tehničkih nauka u Novom Sadu, 2-5 Mart, 2009, pp. 19-22, ISBN 978-86-7892-157-5 Anišić Z., Šešlija D., Lalić B., Milenković I., Gečevska V., Veža I.: Development of joint master studies for product lifecycle management, 16. Skup "Trendovi razvoja" - TREND, Kopaonik: Fakultet tehničkih nauka, Novi Sad, 1-4 Mart, 2010, pp. 312-318, ISBN 978-86-7892-236-7 Anišić Z.: PLM Concept - Innovative View in Engineering Education, 16. TRENDOVI RAZVOJA - TREND, Kopaonik: Fakultet tehničkih nauka, 2-5 Mart, 2010, pp. 304-307, ISBN 978-86-7892-157-5 Firstner (Fürstner) I., Anišić Z.: Razvoj zajedničkih studijskih programa prvog i drugog stepena iz oblasti mehatronike, 18. Skup "Trendovi razvoja" - TREND, Kopaonik: Univerzitet u Novom Sadu - Fakultet tehničkih nauka, 27-1 Februar, 2012, pp. 58-61, ISBN 978-86-7892-388-3 Anišić Z., Firstner (Fürstner) I., Nađ A.: Položaj Visoke tehničke škole strukovnih studija u Subotici na lokalnom tržištu visokog obrazovanja, 19. TREND - Trendovi razvoja, Maribor: Fakultet tehničkih nauka u Novom Sadu, 18-21 Februar, 2013, pp. 100-103, ISBN 978-86-7892-485-9 Anišić Z., Orčik A.: Prema modelu otvorene škole - studenti u inovativnom takmičenju, 20. TREND - Trendovi razvoja, Kopaonik: FTN, Novi Sad, 24-27 Februar, 2014, pp. 251-254, ISBN 978-86-7892-594-8 Nešić S., Sandić N., Anišić Z.: Istraživanje uloge fonda za inovacionu delatnost kao podrške inovativnim preduzećima u Srbiji, 10. Skup privrednika i naučnika - SPIN, Beograd: Univerzitet u Beogradu, Fakultet organizacionih nauka, 5-6 Novembar, 2015, pp. 66-73, ISBN 978-86-7680-320-0 Anišić Z., Miletić J.: Unapređenje veština javnog nastupa studenata putem VR aplikacije i personalizovanih avatara, 27. XXVII Skup Trendovi razvoja: "On-line nastava na univerzitetima", Novi Sad: Fakultet tehničkih nauka u Novom Sadu, 15-18 Februar, 2021, pp. 423-426, ISBN 978-86-6022-313-7 Anišić Z., Medić N., Petrović (Ćurčić) J.: Istraživanje ponude i potražnje za specifičnim znanjima u kontekstu industrije 4.0 kao podrške u razvoju studijskih programa, 28. Trendovi razvoja: Univerzitetsko obrazovanje za privredu, Kopaonik: Fakultet tehničkih nauka, Univerzitet u Novom Sadu, 2022, pp. 63-66, ISBN 978-86-6022-401-1 Anišić Z., Petrović (Ćurčić) J., Medić N.: Istraživanje potreba za specijalnostima i veštinama u kompanijama u oblasti industrijskog inženjerstva i menadžmenta, 28. Trendovi razvoja: Univerzitetsko obrazovanje za privredu, Kopaonik: Fakultet tehničkih nauka, Univerzitet u Novom Sadu, 2022, pp. 79-82, ISBN 978-86-6022-401-1	47	23.00
M71	Odbranjena doktorska disertacija Odbranjena doktorska disertacija Anišić Z.: Istraživanje uticaja integralnog razvoja proizvoda na tehnološke strukture u montaži i određivanje potrebnog nivoa automatizacije, Novi Sad, Fakultet tehničkih nauka, 2002	1	6.00
M72	Odbranjen magistarski rad Odbranjen magistarski rad Anišić Z.: Razvoj postupka za dinamičko modeliranje i tehnoekonomsku optimizaciju montažnih sistema, Novi Sad, Fakultet tehničkih nauka, 1997	1	3.00
M85	Prototip, nova metoda, softver, standardizovan ili atestiran instrument, Prototip, nova metoda, softver, standardizovan ili atestiran instrument, Anišić Z.: Konfigurator proizvoda - softver, 2005 Anišić Z.: Konfigurator proizvoda - softver Korisnik: ŽAKO d.o.o. Stara Moravica Rađeno za: ŽAKO d.o.o. Stara Moravica, 2006 Anišić Z., Čović Z., Anišić Z., Firstner (Fürstner) I., Čović Z., Firstner (Fürstner) I.: Inteligentni konfigurator za termoizolaciju i dekoraciju građevinskih objekata, 2008	3	6.00